- 12 Feb, 2020 40 commits
-
-
Mauro Carvalho Chehab authored
This file is almost in ReST format. Just one change was needed: - Add markups for a literal block and change its indentation. While here, use the standard markup for the document title. Signed-off-by:Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Add markups for tables; - Use list markups; - Add markups for literal blocks; - Add blank lines. Signed-off-by:
-
Mauro Carvalho Chehab authored
This file is almost in ReST format. Just a small set of changes were needed: - Add markups for lists; - Add markups for a literal block; - Adjust whitespaces. While here, use the standard markup for the document title. Signed-off-by: -
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Add markups for tables; - Add markups for literal blocks; - Add blank lines and adjust indentation. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use document title and chapter markups; - Convert tables; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation Signed-off-by:
-
Mauro Carvalho Chehab authored
- Add a title for the document; - Adjust whitespaces for it to be properly formatted after parsed. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Add proper markups for titles; - Adjust whitespaces and blank lines to match ReST needs; - Mark literal blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
convert api.txt document to ReST format while trying to keep its format as close as possible with the authors intent, and avoid adding uneeded markups. - Use document title and chapter markups; - Convert tables; - Add markups for literal blocks; - use :field: for field descriptions; - Add blank lines and adjust indentation Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - adjust indentation and add blank lines as needed; - use :field: markups; - Use cross-references; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use standard title markup; - adjust lists; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - adjust indentation and add blank lines as needed; - adjust tables to match ReST accepted formats; - use :field: markups; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use standard markup for document title; - Adjust indentation and add blank lines as needed; - use the notes markup; - mark code blocks as such. Signed-off-by:
-
Mauro Carvalho Chehab authored
This document is almost in ReST format. The only thing needed is to mark a list as such and to add an extra whitespace. Yet, let's also use the standard document title markup, as it makes easier if anyone wants later to add sessions to it. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - change indent to match ReST syntax; - use proper table markups; - use literal block markups. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use title markups; - change indent to match ReST syntax; - use proper table markups; - use literal block markups. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Fix document title to match ReST format - Convert the table to be properly recognized - use proper markups for literal blocks - Some indentation fixes to match ReST While here, add an index for kvm devices. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Use document title markup; - Convert tables; - Add blank lines and adjust indentation. Signed-off-by:
-
Mauro Carvalho Chehab authored
- Fix document title to match ReST format - Convert the table to be properly recognized - Some indentation fixes to match ReST syntax. Signed-off-by:
-
Mauro Carvalho Chehab authored
Several URLs are pointing to outdated places. Update the references for the URLs whose contents still exists, removing the others. Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of pointing for a pre-2.4 and a seaparate patch, update it to match current upstream, as UML was merged a long time ago. Signed-off-by:
-
Mauro Carvalho Chehab authored
Despite being an old document, it contains lots of information that could still be useful. The document has a nice style with makes easy to convert to ReST. So, let's convert it to ReST. This patch does: - Use proper markups for titles; - Mark and proper indent literal blocks; - don't use an 'o' character for lists; - other minor changes required for the doc to be parsed. Signed-off-by:
-
Mauro Carvalho Chehab authored
Add this file to a new kvm/arm index.rst, in order for it to be shown as part of the virt book. Signed-off-by:
-
Paolo Bonzini authored
The check cpu->hv_clock.system_time < 0 is redundant since system_time is a u64 and hence can never be less than zero. But what was actually meant is to check that the result is positive, since kernel_ns and v->kvm->arch.kvmclock_offset are both s64. Reported-by:
Colin King <colin.king@canonical.com> Suggested-by:
Sean Christopherson <sean.j.christopherson@intel.com> Addresses-Coverity: ("Macro compares unsigned to 0") Reviewed-by:
Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
-
Eric Auger authored
x86_register enum is not used, let's remove it. Signed-off-by:
Eric Auger <eric.auger@redhat.com> Suggested-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
-
Sean Christopherson authored
Define PT_MAX_FULL_LEVELS as PT64_ROOT_MAX_LEVEL, i.e. 5, to fix shadow paging for 5-level guest page tables. PT_MAX_FULL_LEVELS is used to size the arrays that track guest pages table information, i.e. using a "max levels" of 4 causes KVM to access garbage beyond the end of an array when querying state for level 5 entries. E.g. FNAME(gpte_changed) will read garbage and most likely return %true for a level 5 entry, soft-hanging the guest because FNAME(fetch) will restart the guest instead of creating SPTEs because it thinks the guest PTE has changed. Note, KVM doesn't yet support 5-level nested EPT, so PT_MAX_FULL_LEVELS gets to stay "4" for the PTTYPE_EPT case. Fixes: 855feb67 ("KVM: MMU: Add 5 level EPT & Shadow page table support.") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Hardcode the EPT page-walk level for L2 to be 4 levels, as KVM's MMU currently also hardcodes the page walk level for nested EPT to be 4 levels. The L2 guest is all but guaranteed to soft hang on its first instruction when L1 is using EPT, as KVM will construct 4-level page tables and then tell hardware to use 5-level page tables. Fixes: 855feb67 ("KVM: MMU: Add 5 level EPT & Shadow page table support.") Cc: stable@vger.kernel.org Signed-off-by:
-
Miaohe Lin authored
Fix some typos in the comments. Also fix coding style. [Sean Christopherson rewrites the comment of write_fault_to_shadow_pgtable field in struct kvm_vcpu_arch.] Signed-off-by:
-
Sean Christopherson authored
Wrap calls to ->page_fault() with a small shim to directly invoke the TDP fault handler when the kernel is using retpolines and TDP is being used. Single out the TDP fault handler and annotate the TDP path as likely to coerce the compiler into preferring it over the indirect function call. Rename tdp_page_fault() to kvm_tdp_page_fault(), as it's exposed outside of mmu.c to allow inlining the shim. Signed-off-by:
-
Miaohe Lin authored
kvm_make_request() provides smp_wmb() so pending_events changes are guaranteed to be visible. Signed-off-by:
-
Miaohe Lin authored
The KVM_REQ_EVENT request is already made in kvm_set_rflags(). We should not make it again. Signed-off-by:
-
Eric Auger authored
L2 guest calls vmcall and L1 checks the exit status does correspond. Signed-off-by:
Wei Huang <wei.huang2@amd.com> Signed-off-by:
-
Eric Auger authored
Add the basic infrastructure needed to test AMD nested SVM. This is largely copied from the KVM unit test infrastructure. Signed-off-by:
-
Eric Auger authored
get_gdt_base() and get_idt_base() only return the base address of the descriptor tables. Soon we will need to get the size as well. Change the prototype of those functions so that they return the whole desc_ptr struct instead of the address field. Signed-off-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Signed-off-by:
-
Oliver Upton authored
KVM allows the deferral of exception payloads when a vCPU is in guest mode to allow the L1 hypervisor to intercept certain events (#PF, #DB) before register state has been modified. However, this behavior is incompatible with the KVM_{GET,SET}_VCPU_EVENTS ABI, as userspace expects register state to have been immediately modified. Userspace may opt-in for the payload deferral behavior with the KVM_CAP_EXCEPTION_PAYLOAD per-VM capability. As such, kvm_multiple_exception() will immediately manipulate guest registers if the capability hasn't been requested. Since the deferral is only necessary if a userspace ioctl were to be serviced at the same as a payload bearing exception is recognized, this behavior can be relaxed. Instead, opportunistically defer the payload from kvm_multiple_exception() and deliver the payload before completing a KVM_GET_VCPU_EVENTS ioctl. Signed-off-by:Oliver Upton <oupton@google.com> Signed-off-by:
-
Oliver Upton authored
SDM 27.3.4 states that the 'pending debug exceptions' VMCS field will be populated if a VM-exit caused by an INIT signal takes priority over a debug-trap. Emulate this behavior when synthesizing an INIT signal VM-exit into L1. Fixes: 4b9852f4 ("KVM: x86: Fix INIT signal handling in various CPU states") Signed-off-by:
-
Oliver Upton authored
KVM defines the #DB payload as compatible with the 'pending debug exceptions' field under VMX, not DR6. Mask off bit 12 when applying the payload to DR6, as it is reserved on DR6 but not the 'pending debug exceptions' field. Fixes: f10c729f ("kvm: vmx: Defer setting of DR6 until #DB delivery") Signed-off-by:
-
Marc Zyngier authored
Accessing a per-cpu variable only makes sense when preemption is disabled (and the kernel does check this when the right debug options are switched on). For kvm_get_running_vcpu(), it is fine to return the value after re-enabling preemption, as the preempt notifiers will make sure that this is kept consistent across task migration (the comment above the function hints at it, but lacks the crucial preemption management). While we're at it, move the comment from the ARM code, which explains why the whole thing works. Fixes: 7495e22b ("KVM: Move running VCPU from ARM to common code"). Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by:
Zenghui Yu <yuzenghui@huawei.com> Tested-by:
Peter Xu <peterx@redhat.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/318984f6-bc36-33a3-abc6-bf2295974b06@huawei.com Message-id: <20200207163410.31276-1-maz@kernel.org> Signed-off-by:
-
