- 15 Sep, 2016 5 commits
-
-
Kristian H. Kristensen authored
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an unaligned 64 bit field (modifier). This get packed differently between 32 bit and 64 bit modes on architectures that can handle unaligned 64 bit access (X86 and IA64). Other architectures pack the structs the same and don't need the compat wrapper. Use the same condition for drm_mode_fb_cmd2 as we use for drm_update_draw. Note that only the modifier will be packed differently between compat and non-compat versions. Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
Kristian H. Kristensen <hoegsberg@chromium.org> [seanpaul added not at bottom of commit msg re: modifier] Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org
-
Masahiro Yamada authored
Remove unneeded variables and assignments. Reviewed-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Masahiro Yamada authored
Remove unneeded variables and assignments. Reviewed-by:
-
Masahiro Yamada authored
Remove unneeded variables and assignments. Reviewed-by:
-
Masahiro Yamada authored
Remove unneeded variables and assignments. Reviewed-by:
-
- 13 Sep, 2016 1 commit
-
-
Chris Wilson authored
If we being polled with a timeout of zero, a nonblocking busy query, we don't need to install any fence callbacks as we will not be waiting. As we only install the callback once, the overhead comes from the atomic bit test that also causes serialisation between threads. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Reviewed-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: http://patchwork.freedesktop.org/patch/msgid/20160829181613.30722-1-chris@chris-wilson.co.uk
-
- 12 Sep, 2016 3 commits
-
-
Gustavo Padovan authored
If userspace is running an synchronously atomic commit and interrupts the atomic operation during fence_wait() it will hang until the timer expires, so here we change the wait to be interruptible so it stop immediately when userspace wants to quit. Also adds the necessary error checking for fence_wait(). v2: Comment by Daniel Vetter - Add error checking for fence_wait() v3: Rebase on top of new atomic noblocking support v4: Comment by Maarten Lankhorst - remove 'swapped' bitfield as it was duplicating information v5: Comments by Maarten Lankhorst - assign plane->state to plane_state if !intr - squash previous patch into this one v6: Comment by Sean Paul - rename intr to pre_swap Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> [seanpaul fixed a couple checkpatch warnings and moved the preswap comment] Signed-off-by:
-
Maarten Lankhorst authored
Property lifetimes are equal to the device lifetime, so the separate drm_property_find is not needed. The pointer can be retrieved from the properties member, which saves us some locking and a extra lookup. The lifetime for properties is until the device is destroyed, which happens late in the device unload path. kms_atomic is also testing for invalid properties which returns -ENOENT, to be consistent return -ENOENT for valid properties that don't appear on the object property list. Changes since v1: - Return -ENOENT for invalid properties to make kms_atomic pass. - Change commit message slightly to take this into account. Testcase: kms_atomic Testcase: kms_properties Fixes: 4e9951d9 ("drm/atomic: Reject properties not part of the object.") Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Sergei Shtylyov authored
The Renesas Wheat board has 2 ADV7513 chips on the same I2C bus, however the ADV751x driver only supports 1 chip as it tries to assign the packet/ EDID/CEC memory I2C devices to the fixed I2C addresses. Assign these I2C addresses at the fixed offsets (derived from the programming guide) from the main register map address instead. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1580212.O1LYdJFM97@wasted.cogentembedded.com
-
- 08 Sep, 2016 1 commit
-
-
Imre Deak authored
This fixes the error path for platforms that don't define the new page_flip_target() hook. Fixes: c229bfbb ("drm: Add page_flip_target CRTC hook v2") Testcase: igt/kms_flip/basic-flip-vs-dpms CC: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1473269025-16148-1-git-send-email-imre.deak@intel.com
-
- 07 Sep, 2016 1 commit
-
-
Maarten Lankhorst authored
This reverts commit 77953bd1. This causes a kernel panic when trying to assign a blob to a property, and has obviously never been tested. Fixes: 77953bd1 ("drm: Unify handling of blob and object properties") Signed-off-by:
Liu Ying <gnuiyl@gmail.com> Acked-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
-
- 06 Sep, 2016 3 commits
-
-
Haixia Shi authored
The usb_driver suspend and resume function pointers must be populated to prevent forced unbinding of USB interface driver. See usb/core/driver.c: unbind_no_pm_drivers_interfaces(). Restore mode and damage the entire frame buffer upon resume. TEST=suspend and resume with the same UDL device connected TEST=suspend with UDL, unplug UDL and resume TEST=suspend with UDL, unplug and connect another UDL device then resume Signed-off-by:
Haixia Shi <hshi@chromium.org> Reviewed-by:
Stéphane Marchesin <marcheu@chromium.org> [seanpaul fixed checkpatch warnings and gave marcheu his é back] Signed-off-by:
-
Xie XiuQi authored
Use 1UL for unsigned long, or we'll meet a overflow issue with UBSAN. [ 15.589489] UBSAN: Undefined behaviour in drivers/gpu/drm/drm_hashtab.c:145:35 [ 15.589500] signed integer overflow: [ 15.589999] -2147483648 - 1 cannot be represented in type 'int' [ 15.590434] CPU: 2 PID: 294 Comm: plymouthd Not tainted 3.10.0-327.28.3.el7.x86_64 #1 [ 15.590653] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 01/07/2011 [ 15.591001] 1ffff1000670fe83 000000000d6b385e ffff88003387f3e0 ffffffff81ee3140 [ 15.591028] ffff88003387f3f8 ffffffff81ee31fd ffffffffa032f460 ffff88003387f560 [ 15.591044] ffffffff81ee46e2 0000002d00000009 0000000000000001 0000000041b58ab3 [ 15.591059] Call Trace: [ 15.591078] [<ffffffff81ee3140>] dump_stack+0x1e/0x20 [ 15.591093] [<ffffffff81ee31fd>] ubsan_epilogue+0x12/0x55 [ 15.591109] [<ffffffff81ee46e2>] handle_overflow+0x1ba/0x215 [ 15.591126] [<ffffffff81ee4528>] ? __ubsan_handle_negate_overflow+0x162/0x162 [ 15.591146] [<ffffffff8103416c>] ? print_context_stack+0x9c/0x160 [ 15.591163] [<ffffffff81031df2>] ? dump_trace+0x252/0x750 [ 15.591181] [<ffffffff81739023>] ? __list_add+0x93/0x160 [ 15.591197] [<ffffffff81ee4798>] __ubsan_handle_sub_overflow+0x2a/0x31 [ 15.591261] [<ffffffffa0282140>] drm_ht_just_insert_please+0x1e0/0x200 [drm] [ 15.591290] [<ffffffffa0528c7a>] ttm_base_object_init+0x10a/0x270 [ttm] [ 15.591316] [<ffffffffa052a34c>] ttm_vt_lock+0x28c/0x3a0 [ttm] [ 15.591343] [<ffffffffa052a0c0>] ? ttm_write_lock+0x180/0x180 [ttm] [ 15.591362] [<ffffffff81419526>] ? kasan_unpoison_shadow+0x36/0x50 [ 15.591379] [<ffffffff81419526>] ? kasan_unpoison_shadow+0x36/0x50 [ 15.591396] [<ffffffff81419526>] ? kasan_unpoison_shadow+0x36/0x50 [ 15.591413] [<ffffffff81419526>] ? kasan_unpoison_shadow+0x36/0x50 [ 15.591442] [<ffffffffa061cbe1>] vmw_master_set+0x121/0x470 [vmwgfx] [ 15.591459] [<ffffffff811773a5>] ? __init_waitqueue_head+0x45/0x70 [ 15.591487] [<ffffffffa061cac0>] ? vmw_master_drop+0x310/0x310 [vmwgfx] [ 15.591535] [<ffffffffa026946a>] drm_open+0x92a/0xc00 [drm] [ 15.591563] [<ffffffffa0619ff0>] ? vmw_driver_open+0x170/0x170 [vmwgfx] [ 15.591610] [<ffffffffa0268b40>] ? drm_poll+0xe0/0xe0 [drm] [ 15.591661] [<ffffffffa02797b4>] drm_stub_open+0x224/0x330 [drm] [ 15.591711] [<ffffffffa0279590>] ? drm_minor_acquire+0x240/0x240 [drm] [ 15.591727] [<ffffffff8145fa8a>] chrdev_open+0x1fa/0x3f0 [ 15.591742] [<ffffffff8145f890>] ? cdev_put+0x50/0x50 [ 15.591761] [<ffffffff814f6dc3>] ? __fsnotify_parent+0x53/0x210 [ 15.591778] [<ffffffff8144fde1>] do_dentry_open+0x351/0x670 [ 15.591792] [<ffffffff8145f890>] ? cdev_put+0x50/0x50 [ 15.591807] [<ffffffff814503c2>] vfs_open+0xa2/0x170 [ 15.591824] [<ffffffff8147b5df>] do_last+0xccf/0x2c80 [ 15.591842] [<ffffffff8147a910>] ? filename_create+0x320/0x320 [ 15.591858] [<ffffffff81472549>] ? path_init+0x1b9/0xa90 [ 15.591875] [<ffffffff81472390>] ? mountpoint_last+0x9a0/0x9a0 [ 15.591894] [<ffffffff815f9ccf>] ? selinux_file_alloc_security+0xcf/0x130 [ 15.591911] [<ffffffff8147d777>] path_openat+0x1e7/0xcc0 [ 15.591927] [<ffffffff81031df2>] ? dump_trace+0x252/0x750 [ 15.591943] [<ffffffff8147d590>] ? do_last+0x2c80/0x2c80 [ 15.591959] [<ffffffff81739023>] ? __list_add+0x93/0x160 [ 15.591974] [<ffffffff8104b48d>] ? save_stack_trace+0x7d/0xb0 [ 15.591989] [<ffffffff81480824>] do_filp_open+0xa4/0x160 [ 15.592004] [<ffffffff81480780>] ? user_path_mountpoint_at+0x50/0x50 [ 15.592022] [<ffffffff8149d755>] ? __alloc_fd+0x175/0x300 [ 15.592039] [<ffffffff81453127>] do_sys_open+0x1b7/0x3f0 [ 15.592054] [<ffffffff81452f70>] ? filp_open+0x80/0x80 [ 15.592070] [<ffffffff81453392>] SyS_open+0x32/0x40 [ 15.592088] [<ffffffff81f08989>] system_call_fastpath+0x16/0x1b Signed-off-by:
Xie XiuQi <xiexiuqi@huawei.com> [seanpaul tweaked subject to remove "gpu/"] Signed-off-by:
-
Maarten Lankhorst authored
The legacy setprop ioctl doesn't attempt to set properties that are not enumerated on the object. The atomic ioctl does, fix this by validating first. Signed-off-by:
-
- 01 Sep, 2016 1 commit
-
-
Tomeu Vizoso authored
Also provide some pointers for building IGT as some kernel hackers might not be that familiar with building stuff on Linux distros. Signed-off-by:
Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1472715695-19812-1-git-send-email-tomeu.vizoso@collabora.com
-
- 31 Aug, 2016 3 commits
-
-
Dave Airlie authored
This reverts commit d10571fc. This isn't how we get to do this unfortunately. Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm-intelDave Airlie authored
More -misc stuff - moar drm_crtc.c split up&documentation - some fixes for the simple kms helpers (Andrea) - I included all the dri1 patches from David - we're not removing any code or drivers, and it seems to have worked as a wake-up call to motivate a few more people to upstream kms conversions for these. Feel free to revert if you disagree strongly. - a few other single patches * tag 'topic/drm-misc-2016-08-31' of git://anongit.freedesktop.org/drm-intel: (24 commits) drm: drm_probe_helper: Fix output_poll_work scheduling drm: bridge/dw-hdmi: Fix colorspace and scan information registers values drm/doc: Polish docs for drm_property&drm_property_blob drm: Unify handling of blob and object properties drm: Extract drm_property.[hc] drm: move drm_mode_legacy_fb_format to drm_fourcc.c drm/doc: Polish docs for drm_mode_object drm: Remove drm_mode_object->atomic_count drm: Extract drm_mode_object.[hc] drm/doc: Polish kerneldoc for encoders drm: Extract drm_encoder.[hc] drm/fb-helper: don't call remove_conflicting_framebuffers for FB=m && DRM=y drm/atomic-helper: Add NO_DISABLE_AFTER_MODESET flag support for plane commit drm/atomic-helper: Disable appropriate planes in disable_planes_on_crtc() drm/atomic-helper: Add atomic_disable CRTC helper callback drm: simple_kms_helper: add support for bridges drm: simple_kms_helper: make connector optional at init time drm/bridge: introduce bridge detaching mechanism drm/simple-helpers: Always add planes to the state update drm: reduce GETCLIENT to a minimum ...
-
Peter Ujfalusi authored
drm_kms_helper_poll_enable_locked() should check if we have delayed event pending and if we have, schedule the work to run without delay. Currently the output_poll_work is only scheduled if any of the connectors have DRM_CONNECTOR_POLL_CONNECT or DRM_CONNECTOR_POLL_DISCONNECT with DRM_OUTPUT_POLL_PERIOD delay. It does not matter if we have delayed event already registered to be handled. The detection will be delayd by DRM_OUTPUT_POLL_PERIOD in any case. Furthermore if none of the connectors are marked as POLL_CONNECT or POLL_DISCONNECT because all connectors are either POLL_HPD or they are always connected: the output_poll_work will not run at all even if we have delayed event marked. When none of the connectors require polling, their initial status change from unknown to connected/disconnected is not going to be handled until the first kms application starts or if we have fb console enabled. Note that in general the output poll work should be enabled already when this happens, but at driver load usually the first probe happens before the output polling is enabled. This patch fixes this case. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> [danvet: Note when exactly this is an issue, since the probe code schedules the poll work itself already.] Signed-off-by:
-
- 30 Aug, 2016 1 commit
-
-
Jose Abreu authored
Colorspace and scan information values were being written in wrong offsets. This patch corrects this and writes the values at the offsets specified in the databook. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
- 29 Aug, 2016 16 commits
-
-
Daniel Vetter authored
- remove kerneldoc for drm-internal functions - drm_property_replace_global_blob isn't actually atomic, and doesn't need to be. Update docs&comments to match - document all the types and try to link things a bit better - nits all over v2: Appease checkpatch in the moved code (Archit) Reviewed-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160829082757.17913-9-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
They work exactly the same now, after the refcounting unification a bit ago. The only reason they're distinct is backwards compat with existing userspace. Cc: Daniel Stone <daniels@collabora.com> Reviewed-by:
-
Daniel Vetter authored
This just contains the base property classes and all the code to handle blobs. I think for any kind of standardized/shared properties it's better to have separate files - this is fairly big already as-is. v2: resurrect misplaced hunk (Daniel Stone) Cc: Daniel Stone <daniel@fooishbar.org> Reviewed-by:
-
Daniel Vetter authored
It's part of the drm fourcc handling code, mapping the old depth/bpp values to new fourcc codes. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Daniel Vetter authored
I figured an overview section here is overkill, and better to just document the 2 structures themselves well enough. v2: Review from Archit: - Appease checkpatch in moved code. - Spelling fixes in the kerneldoc. Reviewed-by:
-
Daniel Vetter authored
It's only used in drm_mode_object_get_properties, and we can compute it there directly with a bit of code shuffling. Reviewed-by:
-
Daniel Vetter authored
Just for the struct drm_mode_object base class. The header file was already partially extracted to help untangle the include loops. v2: - Also move the generic get/set property ioctls. At first this seemed like a bad idea since it requires making drm_mode_crtc_set_obj_prop non-static. But eventually that will get split away too (like the connector version already is) for both crtc and planes. Hence I reconsidered. - drm_mode_object.[hc] instead of drm_modeset.[hc], which requires renaming the drm_modeset.h header I already started building up. This is more consistent (matches the name of the main structure), and I want to be able to use drm_modeset.[hc] for the basic modeset init/cleanup functionality like drm_mode_config_init. Reviewed-by:
-
Daniel Vetter authored
- Move missing bits into struct drm_encoder docs. - Explain that encoders are 95% internal and only 5% uapi, and that in general the uapi part is broken. - Remove verbose comments for functions not exposed to drivers. v2: Review from Archit: - Appease checkpatch in the moved code. - Make it clearer that bridges are not exposed to userspace. Reviewed-by:
-
Daniel Vetter authored
Same treatment as before. Only hiccup is drm_crtc_mask, which unfortunately can't be resolved until drm_crtc.h is less of a monster. Untangle the header loop with a forward declaration for that static inline. Reviewed-by:
-
Arnd Bergmann authored
When CONFIG_DRM_KMS_FB_HELPER is disabled, we can have a configuration in which some DRM drivers are built-in, but the framebuffer core is a loadable module. This results in a link error, such as: drivers/gpu/drm/radeon/radeon.o: In function `radeon_pci_probe': radeon_kfd.c:(.text.radeon_pci_probe+0xbc): undefined reference to `remove_conflicting_framebuffers' drivers/gpu/drm/amd/amdgpu/amdgpu.o: In function `amdgpu_pci_probe': amdgpu_mn.c:(.text.amdgpu_pci_probe+0xa8): undefined reference to `remove_conflicting_framebuffers' drivers/gpu/drm/mgag200/mgag200.o: In function `mga_vram_init': mgag200_ttm.c:(.text.mga_vram_init+0xa8): undefined reference to `remove_conflicting_framebuffers' drivers/gpu/drm/mgag200/mgag200.o: In function `mga_pci_probe': mgag200_ttm.c:(.text.mga_pci_probe+0x88): undefined reference to `remove_conflicting_framebuffers' Makefile:969: recipe for target 'vmlinux' failed This changes the compile-time check to IS_REACHABLE, which means we end up not calling remove_conflicting_framebuffers() in the configuration, which seems good enough, as we know that no framebuffer driver is loaded by the time that the built-in DRM driver calls remove_conflicting_framebuffers. We could alternatively avoid the link error by forcing CONFIG_FB to not be a module in this case, but that wouldn't change anything at runtime, and just make the already convoluted set of dependencies worse here. I could not find out what happens if the fbdev driver gets loaded as a module after the DRM driver is already initialized, but that is a case that can happen with or without this patch. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 0a3bfe29 ("drm/fb-helper: Fix the dummy remove_conflicting_framebuffers") Signed-off-by:
-
Liu Ying authored
Drivers may set the NO_DISABLE_AFTER_MODESET flag in the 'flags' parameter of the helper drm_atomic_helper_commit_planes() if the relevant display controllers(e.g., IPUv3 for imx-drm) require to disable a CRTC's planes when the CRTC is disabled. The helper would skip the ->atomic_disable call for a plane if the CRTC of the old plane state needs a modesetting operation. Of course, the drivers need to disable the planes in their CRTC disable callbacks since no one else would do that. Suggested-by:
-
Liu Ying authored
Currently, the helper drm_atomic_helper_disable_planes_on_crtc() calls ->atomic_disable for all planes _to be_ enabled on a particular CRTC. This is obviously wrong for those planes which are not scanning out frames when the helper is called. Instead, it's sane to disable active planes of old_crtc_state in the helper. Suggested-by:
-
Liu Ying authored
Some display controllers need plane(s) to be disabled together with the relevant CRTC, e.g., the IPUv3 display controller for imx-drm. This patch adds atomic_disable CRTC helper callback so that old_crtc_state(as a parameter of the callback) could be used to get the active plane(s) of the old CRTC state for disable operation. Suggested-by:
-
Andrea Merello authored
Introduce drm_simple_display_pipe_attach_bridge() and drm_simple_display_pipe_detach_bridge() in order to make it possible to use drm encoders with the simple display pipes managed by simple_kms_helpers Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
Andrea Merello <andrea.merello@gmail.com> Reviewed-by:
-
Andrea Merello authored
drm_simple_display_pipe_init() pretends to attach a connector to the display pipe. In case a drm bridge has to be used, then it's the bridge that takes care of connectors. This patch makes the connector parameter optional for drm_simple_display_pipe_init(), so that a drm bridge could handle connector by itself later. Signed-off-by:
-
Andrea Merello authored
Up to now, once a bridge has been attached to a DRM device, it cannot be undone. In particular you couldn't rmmod/insmod a DRM driver that uses a bridge, because the bridge would remain bound to the first (dead) driver instance. This patch fixes this by introducing drm_encoder_detach() and a ->detach callback in drm_bridge_funcs for the bridge to be notified about detaches. It's DRM/KMS driver responsibility to call drm_encoder_detach(). While adding the bridge detach callback, with its kerneldoc, I also added kerneldoc for attach callback. Few other kerneldocs fixes around there are included. Suggested-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
-
- 25 Aug, 2016 5 commits
-
-
Daniel Vetter authored
Our update function is hooked to the single plane, which might not get called for crtc-only updates. Which is surprising, so fix this by always adding the plane. While at it document how&when the event should be sent out better in the kerneldoc. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: andrea.merello@gmail.com Tested-and-Reported-by: andrea.merello@gmail.com Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
-
David Herrmann authored
The *only* known user of GETCLIENT is libva, which uses it to check whether its own context is authenticated. It used to iterate all clients, look for one that matches its own pid and then check its state. The entire purpose for us to still have a GETCLIENT implementation is to serve libva. So lets not pretend we do anything else: Make this function return information on the caller's context only, fake the PID to the caller's pid so they always match, and just fill in the "authenticated" bit, nothing else. This patch reduces the complexity of GETCLIENT to a bare minimum, avoids any dependency on priv->uid or priv->pid (allows us to get rid of them), and makes libva happy by always *exactly* returning the information it wants. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
David Herrmann authored
The legacy DRI1 drivers expose highly broken interfaces to user-space. No modern system should enable them, or you will effectively allow user-space to circumvent most of your kernel security measures. The DRI1 kernel APIs are simply broken. User-space can always use vesafb/efifb/simplefb and friends to get working graphics. Lets hide the old drivers behind CONFIG_BROKEN. In case they turn out to be still used (really?), we can easily revert this and figure out a way to move them out of sight (e.g., moving all DRI1 drivers to drivers/gpu/dri1/). Signed-off-by:
-
David Herrmann authored
Lets move forward and hide the remaining DRI1 drivers behind a config option, so we have a central place to disable them all. Furthermore, we can provide a clear warning to anyone enabling them. Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
First drm-next pull for radeon and amdgpu for 4.9. Highlights: - powerplay support for iceland asics - improved GPU reset (both full asic and per block) - UVD and VCE powergating for CZ and ST - VCE clockgating for CZ and ST - Support for pre-initialized (e.g., zeroed) vram buffers - ttm cleanups - virtual display support - core and radeon/amdgpu support for page_flip_target - lots of bug fixes and clean ups * 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux: (171 commits) drm/amdgpu: use memcpy_toio for VCE firmware upload drm/amdgpu: use memcpy_to/fromio for UVD fw upload drm/amd/powerplay: delete useless code in iceland_hwmgr.c. drm/radeon: switch UVD code to use UVD_NO_OP for padding drm/amdgpu: switch UVD code to use UVD_NO_OP for padding drm/radeon: add support for UVD_NO_OP register drm/amdgpu: add support for UVD_NO_OP register drm/amdgpu: fix VCE ib alignment value drm/amdgpu: fix IB alignment for UVD drm/amd/amdgpu: Print ring name in amdgpu_ib_schedule() drm/radeon: remove dead code, si_mc_load_microcode (v2) drm/radeon/cik: remove dead code (v2) drm/amd/powerplay: avoid NULL dereference, cz_hwmgr.c drm/amd/powerplay: avoid NULL pointer dereference drm/amdgpu/gmc8: remove dead code (v2) drm/amdgpu/gmc7: remove dead code (v2) drm/amdgpu: Fix indentation in dce_v8_0_audio_write_sad_regs() drm/amdgpu: Use correct mask in dce_v8_0_afmt_setmode() and fix comment typos. drm/amdgpu: cleanup amdgpu_vm_bo_update params drm/amdgpu: stop adding dummy entry in amdgpu_ttm_placement_init ...
-
