- 20 May, 2010 40 commits
-
-
Laurent Pinchart authored
This webcam gadget instantiates a UVC camera (360p and 720p resolutions in YUYV and MJPEG). Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Laurent Pinchart authored
This USB video class function driver implements a video capture device from the host's point of view. It creates a V4L2 output device on the gadget's side to transfer data from a userspace application over USB. The UVC-specific descriptors are passed by the gadget driver to the UVC function driver, making them completely configurable without any modification to the function's driver code. Signed-off-by:
-
Matthew Wilcox authored
Change the type of the URB's 'sg' pointer from a usb_sg_request to a scatterlist. This allows drivers to submit scatter-gather lists without using the usb_sg_wait() interface. It has the added benefit of removing the typecasts that were added as part of patch as1368 (and slightly decreasing the number of pointer dereferences). Signed-off-by:
Matthew Wilcox <willy@linux.intel.com> Reviewed-by:
Alan Stern <stern@rowland.harvard.edu> Tested-by:
-
Matthew Wilcox authored
The stronger type-checking would have prevented a bug I had. Signed-off-by:
-
Matthew Wilcox authored
Converting a pipe number to a struct usb_host_endpoint pointer is a little messy. Introduce a new convenience function to hide the mess. Signed-off-by:
-
Matthew Wilcox authored
The Pipe Usage descriptor is needed for USB Attached SCSI Signed-off-by:
-
Bill Pemberton authored
Signed-off-by:
Bill Pemberton <wfp5p@virginia.edu> Signed-off-by:
-
Bill Pemberton authored
Signed-off-by:
-
Bill Pemberton authored
Signed-off-by:
-
Bill Pemberton authored
qset_print() was not declared static although it is not used outside of debug.c Signed-off-by:
-
Hans de Goede authored
These Appotech controllers are found in Picture Frames, they provide a (buggy) emulation of a cdrom drive which contains the windows software Uploading of pictures happens over the corresponding /dev/sg device. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Dinh Nguyen authored
The max packet length bit mask used for isochronous endpoints should be 0x7FF instead of 0x8FF. 0x8FF will actually clear higher-order bits in the max packet length field. This patch applies to 2.6.34-rc6. Signed-off-by:
Dinh Nguyen <Dinh.Nguyen@freescale.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
Ajay Kumar Gupta authored
AM3517 is based on ES3.1 thus ES2.x related programming is invalid for it so updating ES2.x programming. Also fixed below checkpatch warning: WARNING: unnecessary whitespace before a quoted newline Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by:
-
Ajay Kumar Gupta authored
Fixes below compilation warning: drivers/usb/host/ehci-hcd.c:425: warning: 'ehci_port_power' defined but not used Signed-off-by:
-
Dan Williams authored
Another CDC-ACM + vendor specific interface layout. Signed-off-by:
Dan Williams <dcbw@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by:
-
zhao1980ming authored
this patch adds ZTE modem devices Signed-off-by:
Joey <zhao.ming9@zte.com.cn> Cc: stable <stable@kernel.org> Signed-off-by:
-
Sarah Sharp authored
When a device is disconnected, xhci_free_virt_device() is called. Ramya found that if the device had streams enabled, and then the driver freed the streams with a call to usb_free_streams(), then about a minute after he had called this, his machine crashed with a Bad DMA error. It turns out that xhci_free_virt_device() would attempt to free the endpoint's stream_info data structure if it wasn't NULL, and the free streams function was not setting it to NULL after freeing it. Signed-off-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by:
Ramya Desai <ramya.desai@gmail.com> Signed-off-by:
-
Alan Stern authored
Now that URB_NO_SETUP_DMA_MAP is no longer in use, this patch (as1376) removes all references to it. Signed-off-by:
-
Alan Stern authored
This patch (as1375) eliminates the usb_host_ss_ep_comp structure used for storing a dynamically-allocated copy of the SuperSpeed endpoint companion descriptor. The SuperSpeed descriptor is placed directly in the usb_host_endpoint structure, alongside the standard endpoint descriptor. Signed-off-by:
-
Alan Stern authored
This patch (as1374) cleans up a few loose ends in the include/linux/usb/ch11.h header file and exports it to userspace. Signed-off-by:
-
Alan Stern authored
This patch (as1373) fixes a couple of drivers outside the USB subtree. Devices are now disabled or enabled for autosuspend by calling a core function instead of setting a flag. Signed-off-by:
-
Peter Korsgaard authored
Otherwise reloads will fail. Signed-off-by:
Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by:
-
Alessio Igor Bogani authored
BKL isn't anymore present into this file thus it is no necessary still include smp_lock.h. Signed-off-by:
Alessio Igor Bogani <abogani@texware.it> Signed-off-by:
-
Alessio Igor Bogani authored
BKL is not needed here because necessary locking is already provided by mutex sisusb->lock. Signed-off-by:
-
Fabien Chouteau authored
This patch adds handling of the "Start/Stop Unit" SCSI request to simulate media ejection. Signed-off-by:
Fabien Chouteau <fabien.chouteau@barco.com> Signed-off-by:
-
Fabien Chouteau authored
This patch adds a sysfs entry (/sys/devices/platform/_UDC_/gadget/suspended) to show the suspend state of an USB composite gadget. Signed-off-by:
-
Randy Dunlap authored
Fix usb sparse warnings: drivers/usb/host/isp1362-hcd.c:2220:50: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-mem.c:43:24: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-mem.c:49:24: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-mem.c:161:24: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-mem.c:198:16: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-mem.c:319:31: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-mem.c:1231:33: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-pci.c:177:23: warning: non-ANSI function declaration of function 'xhci_register_pci' drivers/usb/host/xhci-pci.c:182:26: warning: non-ANSI function declaration of function 'xhci_unregister_pci' drivers/usb/host/xhci-ring.c:342:32: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-ring.c:525:34: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-ring.c:1009:32: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-ring.c:1031:32: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-ring.c:1041:16: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-ring.c:1096:30: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-ring.c:1100:27: warning: Using plain integer as NULL pointer drivers/usb/host/xhci-mem.c:224:27: warning: symbol 'xhci_alloc_container_ctx' was not declared. Should it be static? drivers/usb/host/xhci-mem.c:242:6: warning: symbol 'xhci_free_container_ctx' was not declared. Should it be static? Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: Lothar Wassmann <LW@KARO-electronics.de> Signed-off By: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by:
-
Michal Nazarewicz authored
usb_gat_configuratio() used two pointers to point to the same memory. Code simplified, by removing one of them. Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Yauheni Kaliuta authored
Signed-off-by:
Yauheni Kaliuta <yauheni.kaliuta@nokia.com> Signed-off-by:
-
Yauheni Kaliuta authored
Signed-off-by:
-
Randy Dunlap authored
Fix mos7720 Kconfig dependencies. When an enabled bool selects a tristate, the tristate becomes =y, even if it should be limited to modular, so limit the bool kconfig option to configs that will build cleanly. Also change the if-block to a simple depends on. drivers/built-in.o: In function `mos7720_release': mos7720.c:(.text+0xad432): undefined reference to `parport_remove_port' drivers/built-in.o: In function `mos7715_parport_init': mos7720.c:(.text+0xae197): undefined reference to `parport_register_port' mos7720.c:(.text+0xae210): undefined reference to `parport_announce_port' drivers/built-in.o:(.data+0x201c8): undefined reference to `parport_ieee1284_read_nibble' drivers/built-in.o:(.data+0x201d0): undefined reference to `parport_ieee1284_read_byte' Signed-off-by:
-
Mike Dunn authored
No functionality added or bugs fixed, just improved code consistency and (hopefully) readability by replacing send_mos_cmd with the register read & write functions that were used for parallel port registers. Also shortens overall file length. Thoroughly tested, with emphasis on regression testing the serial port. Signed-off-by:
Mike Dunn <mikedunn@newsguy.com> Signed-off-by:
-
Mike Dunn authored
Add support for the parallel port on the moschip MCS7715 device. The port registers itself with the parport subsystem as a low-level driver. A separate entry to the kernel configuration is added beneath that for the mos7720, to avoid the need to link with the parport subsystem code for users who don't have or don't want the parallel port. Only compatibility mode is currently supported (no ECP/EPP). Tested with both moschip devices (7720 and 7715) on UP and SMP hosts, including regression testing of serial port, concurrent operation of serial and parallel ports, and various connect / disconnect scenarios. Signed-off-by:
-
Greg Kroah-Hartman authored
This renames the functions usb_buffer_alloc and usb_buffer_free to the correct ones for the drivers in the staging tree. Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: -
Daniel Mack authored
For more clearance what the functions actually do, usb_buffer_alloc() is renamed to usb_alloc_coherent() usb_buffer_free() is renamed to usb_free_coherent() They should only be used in code which really needs DMA coherency. All call sites have been changed accordingly, except for staging drivers. Signed-off-by:
Daniel Mack <daniel@caiaq.de> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Pedro Ribeiro <pedrib@gmail.com> Signed-off-by:
-
Eric Raymond authored
Documentation update Signed-off-by: -
Carlos Sánchez Acosta authored
Fixed coding styles in the config usb driver. Signed-off-by:
Carlos Sánchez Acosta <csanchez@neurowork.net> Signed-off-by:
Alejandro Sánchez Acosta <asanchez@neurowork.net> Signed-off-by:
-
Javier Blanco de Torres (Neurowork) authored
Fixed coding styles in the ueagle usb driver. Signed-off-by:
Javier Blanco de Torres <jblanco@neurowork.net> Signed-off-by:
-
Viral Mehta authored
isp1301 transceiver driver init should be done before we do ohci omap init Signed-off-by:
Viral Mehta <viral.mehta@lntinfotech.com> Signed-off-by:
-
David Miller authored
I've been running with this patch on my Niagara2 boxes for some time and have not seen any ill effects yet. Maybe we can stash this into the USB tree to get exposure for some time in -next and if anything crops up we can simply revert? Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
