- 05 Mar, 2018 5 commits
-
-
Arnaldo Carvalho de Melo authored
The '--stdio' 'perf top' UI shows it, so lets remove this UI difference and show it too in '--tui', will be useful for 'perf top --tui -F max'. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-n3wd8n395uo4y9irst29pjic@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Arnaldo Carvalho de Melo authored
Add the handy '-F max' shortcut to reading and using the kernel.perf_event_max_sample_rate value as the user supplied sampling frequency: # perf record -F max sleep 1 info: Using a maximum frequency rate of 15,000 Hz [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (14 samples) ] # sysctl kernel.perf_event_max_sample_rate kernel.perf_event_max_sample_rate = 15000 # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 15000, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # perf record -F 10 sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data (4 samples) ] # perf evlist -v cycles:ppp: size: 112, { sample_period, sample_freq }: 10, sample_type: IP|TID|TIME|PERIOD, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1 # Suggested-by:Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-4y0tiuws62c64gp4cf0hme0m@git.kernel.orgSigned-off-by:
-
Jiri Olsa authored
Because the test is no longer using perf trace but perf record instead. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Jiri Olsa authored
There's a problem with relying on backtrace data from 'perf trace' the way the trace+probe_libc_inet_pton does. This test inserts uprobe within ping binary and checks that it gets its sample using 'perf trace'. It also checks it gets proper backtrace from sample and that's where the issue is. The 'perf trace' does not sort events (by definition) so it can happen that it processes the event sample before the ping binary memory map event. This can (very rarely) happen as proved by this events dump output (from custom added debug output): ... 7680/7680: [0x7f4e29718000(0x204000) @ 0 fd:00 33611321 4230892504]: r-xp /usr/lib64/libdl-2.17.so 7680/7680: [0x7f4e29502000(0x216000) @ 0 fd:00 33617257 2606846872]: r-xp /usr/lib64/libz.so.1.2.7 (IP, 0x2): 7680/7680: 0x7f4e29c2ed60 period: 1 addr: 0 7680/7680: [0x564842ef0000(0x233000) @ 0 fd:00 83 1989280200]: r-xp /usr/bin/ping 7680/7680: [0x7f4e2aca2000(0x224000) @ 0 fd:00 33611308 1219144940]: r-xp /usr/lib64/ld-2.17.so ... In this case 'perf trace' fails to resolve the last callchain IP (within the ping binary) because it does not know about the ping binary memory map yet and the test fails like this: PING ::1(::1) 56 data bytes 64 bytes from ::1: icmp_seq=1 ttl=64 time=0.037 ms --- ::1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.037/0.037/0.037/0.000 ms 0.000 probe_libc:inet_pton:(7f4e29c2ed60)) __GI___inet_pton (/usr/lib64/libc-2.17.so) getaddrinfo (/usr/lib64/libc-2.17.so) [0] ([unknown]) FAIL: expected backtrace entry 8 ".*\(.*/bin/ping.*\)$" got "[0] ([unknown])" Switching the test to use 'perf record' and 'perf script' instead of 'perf trace'. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
This first happened with a gcc function, _cpp_lex_token, that has the usual jumps: │1159e6c: ↓ jne 115aa32 <_cpp_lex_token@@Base+0xf92> I.e. jumps to a label inside that function (_cpp_lex_token), and those works, but also this kind: │1159e8b: ↓ jne c469be <cpp_named_operator2name@@Base+0xa72> I.e. jumps to another function, outside _cpp_lex_token, which are not being correctly handled generating as a side effect references to ab->offset[] entries that are set to NULL, so to make this code more robust, check that here. A proper fix for will be put in place, looking at the function name right after the '<' token and probably treating this like a 'call' instruction. For now just don't draw the arrow. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@intel.com> Link: https://lkml.kernel.org/n/tip-5tzvb875ep2sel03aeefgmud@git.kernel.orgSigned-off-by:
-
- 27 Feb, 2018 1 commit
-
-
Jin Yao authored
If we execute 'perf stat --per-thread' with non-root account (even set kernel.perf_event_paranoid = -1 yet), it reports the error: jinyao@skl:~$ perf stat --per-thread Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, which controls use of the performance events system by unprivileged users (without CAP_SYS_ADMIN). The current value is 2: -1: Allow use of (almost) all events by all users Ignore mlock limit after perf_event_mlock_kb without CAP_IPC_LOCK >= 0: Disallow ftrace function tracepoint by users without CAP_SYS_ADMIN Disallow raw tracepoint access by users without CAP_SYS_ADMIN >= 1: Disallow CPU event access by users without CAP_SYS_ADMIN >= 2: Disallow kernel profiling by users without CAP_SYS_ADMIN To make this setting permanent, edit /etc/sysctl.conf too, e.g.: kernel.perf_event_paranoid = -1 Perhaps the ptrace rule doesn't allow to trace some processes. But anyway the global --per-thread mode had better ignore such errors and continue working on other threads. This patch will record the index of error thread in perf_evsel__open() and remove this thread before retrying. For example (run with non-root, kernel.perf_event_paranoid isn't set): jinyao@skl:~$ perf stat --per-thread ^C Performance counter stats for 'system wide': vmstat-3458 6.171984 cpu-clock:u (msec) # 0.000 CPUs utilized perf-3670 0.515599 cpu-clock:u (msec) # 0.000 CPUs utilized vmstat-3458 1,163,643 cycles:u # 0.189 GHz perf-3670 40,881 cycles:u # 0.079 GHz vmstat-3458 1,410,238 instructions:u # 1.21 insn per cycle perf-3670 3,536 instructions:u # 0.09 insn per cycle vmstat-3458 288,937 branches:u # 46.814 M/sec perf-3670 936 branches:u # 1.815 M/sec vmstat-3458 15,195 branch-misses:u # 5.26% of all branches perf-3670 76 branch-misses:u # 8.12% of all branches 12.651675247 seconds time elapsed Signed-off-by:Jin Yao <yao.jin@linux.intel.com> Acked-by:
-
- 26 Feb, 2018 1 commit
-
-
Kan Liang authored
On older (e.g. v4.4) kernels, an annoying fallback message can be observed in 'perf top': ┌─Warning:──────────────────────┐ │fall back to non-overwrite mode│ │ │ │ │ │Press any key... │ └───────────────────────────────┘ The 'perf top' utility has been changed to overwrite mode since commit ebebbf08 ("perf top: Switch default mode to overwrite mode"). For older kernels which don't have overwrite mode support, 'perf top' will fall back to non-overwrite mode and print out the fallback message using ui__warning(), which needs user's input to close. The fallback message is not critical for end users. Turning it to debug message which is printed when running with -vv. Reported-by:
Kan Liang <kan.liang@intel.com> Cc: Kan Liang <kan.liang@intel.com> Fixes: ebebbf08 ("perf top: Switch default mode to overwrite mode") Link: http://lkml.kernel.org/r/1519669030-176549-1-git-send-email-kan.liang@intel.comSigned-off-by:
-
- 22 Feb, 2018 1 commit
-
-
weiping zhang authored
When using -G with one cgroup and -e with multiple events, only the first event gets the correct cgroup setting, all events from the second onwards will track system-wide events. If the user wants to track multiple events for a specific cgroup, the user must give parameters like the following: $ perf stat -e e1 -e e2 -e e3 -G test,test,test This patch simplify this case, just type one cgroup: $ perf stat -e e1 -e e2 -e e3 -G test $ mkdir -p /sys/fs/cgroup/perf_event/empty_cgroup $ perf stat -e cycles -e cache-misses -a -I 1000 -G empty_cgroup Before: 1.001007226 <not counted> cycles empty_cgroup 1.001007226 7,506 cache-misses After: 1.000834097 <not counted> cycles empty_cgroup 1.000834097 <not counted> cache-misses empty_cgroup Signed-off-by:weiping zhang <zhangweiping@didichuxing.com> Acked-by:
-
- 21 Feb, 2018 3 commits
-
-
Andi Kleen authored
Now that the xyarray stores the dimensions we can use those to iterate over the FDs for a evsel. Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Sangwon Hong authored
First, all man pages highlight only perf and subcommands except 'perf kallsyms', which includes the full usage. Fix it for commands to monopolize underlines. Second, options can be ommited when executing 'perf kallsyms', so add square brackets between <option>. Signed-off-by:
Sangwon Hong <qpakzk@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1518377864-20353-1-git-send-email-qpakzk@gmail.comSigned-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.17-20180220' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Initial support for linking with python3, by explicitely setting the PYTHON Makefile variable, python2 remains supported, more work needed to test the shipped python scripts used with 'perf script' (Jaroslav Škarvada) - Make twatch.py, an example python script that sets up evlists and evsels to then parse events from mmap, to work with both python2 and python3 (Arnaldo Carvalho de Melo) - Fix setting 'perf ftrace' function filter when using a non-existent function, which should result in an error instead of simply not setting the filter and showing all functions (Changbin Du) - Fix paranoid check in machine__set_kernel_mmap(), problem introduced in previous perf/core batch (Namhyung Kim) - Fix reading cpuid model information in s/390, ditto, also introduced in the previous perf/core batch (Thomas Richter) Signed-off-by:
-
- 19 Feb, 2018 5 commits
-
-
Jaroslav Škarvada authored
Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by:Jaroslav Škarvada <jskarvad@redhat.com> Tested-by:
-
Arnaldo Carvalho de Melo authored
Will be used to test patches allowing to build perf with python3, so that we make sure that we can build with both versions. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jaroslav Škarvada <jskarvad@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-c2ynv0ozr3eifzsyit6qgh3h@git.kernel.orgSigned-off-by:
-
Changbin Du authored
Before this change, the '--graph-funcs', '--nograph-funcs' and '--trace-funcs' options didn't work as expected when the <func> doesn't exist. Because the kernel side hid possible errors. $ sudo ./perf ftrace -a --graph-depth 1 --graph-funcs abcdefg 0) 0.140 us | rcu_all_qs(); 3) 0.304 us | mutex_unlock(); 0) 0.153 us | find_vma(); 3) 0.088 us | __fsnotify_parent(); 0) 6.145 us | handle_mm_fault(); 3) 0.089 us | fsnotify(); 3) 0.161 us | __sb_end_write(); 3) 0.710 us | SyS_close(); 3) 7.848 us | exit_to_usermode_loop(); On the example above, I specified the function filter 'abcdefg' but all functions are enabled. The expected result is for all functions to be filtered, since there is no such function ('abcdefg') The original fix is to make the kernel support '\0' as end of string: https://lkml.org/lkml/2018/1/16/116 But above fix cannot be compatible with old kernels. Then Namhyung Kim suggest adding a space after function name. This patch will append an '\n' when write tracing file. After this fix, the perf will report correct error state. Also let it print an error if reset_tracing_files() fails. Committer testing: Now it prints: # perf ftrace -a --graph-depth 1 --graph-funcs abcdefg failed to set tracing filters # And for an existing function: # perf ftrace -a --graph-depth 1 --graph-funcs SyS_open 3) | SyS_open() { 3) ! 494.899 us | } 0) + 23.910 us | SyS_open(); 1) + 17.115 us | SyS_open(); 1) + 13.900 us | SyS_open(); ------------------------------------------ 3) qemu-sy-2817 => pickup-1290 ------------------------------------------ 3) + 20.021 us | SyS_open(); # Signed-off-by:Changbin Du <changbin.du@intel.com> Tested-by:
-
Namhyung Kim authored
The machine__set_kernel_mmap() is to setup addresses of the kernel map using external info. But it has a check when the address is given from an incorrect input which should have the start and end address of 0 (i.e. machine__process_kernel_mmap_event). But we also use the end address of 0 for a valid input so change it to check both start and end addresses. Signed-off-by:
-
Thomas Richter authored
Commit eca0fa28 (perf record: Provide detailed information on s390 CPU") fixed a build error on Ubuntu. However the fix uses the wrong size to print the model information. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Fixes: eca0fa28 ("perf record: Provide detailed information on s390 CPU") Link: http://lkml.kernel.org/r/20180219102444.96900-1-tmricht@linux.vnet.ibm.comSigned-off-by:
-
- 17 Feb, 2018 2 commits
-
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.17-20180216' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Fix wrong jump arrow in systems with branch records with cycles, i.e. Intel's >= Skylake (Jin Yao) - Fix 'perf record --per-thread' problem introduced when implementing 'perf stat --per-thread (Jin Yao) - Use arch__compare_symbol_names() to fix 'perf test vmlinux', that was using strcmp(symbol names) while the dso routines doing symbol lookups used the arch overridable one, making this test fail in architectures that overrided that function with something other than strcmp() (Jiri Olsa) - Add 'perf script --show-round-event' to display PERF_RECORD_FINISHED_ROUND entries (Jiri Olsa) - Fix dwarf unwind for stripped binaries in 'perf test' (Jiri Olsa) - Use ordered_events for 'perf report --tasks', otherwise we may get artifacts when PERF_RECORD_FORK gets processed before PERF_RECORD_COMM (when they got recorded in different CPUs) (Jiri Olsa) - Add support to display group output for non group events, i.e. now when one uses 'perf report --group' on a perf.data file recorded without explicitly grouping events with {} (e.g. "perf record -e '{cycles,instructions}'" get the same output that would produce, i.e. see all those non-grouped events in multiple columns, at the same time (Jiri Olsa) - Skip non-address kallsyms entries, e.g. '(null)' for !root (Jiri Olsa) - Kernel maps fixes wrt perf.data(report) versus live system (top) (Jiri Olsa) - Fix memory corruption when using 'perf record -j call -g -a <application>' followed by 'perf report --branch-history' (Jiri Olsa) - ARM CoreSight fixes (Mathieu Poirier) - Add inject capability for CoreSight Traces (Robert Waker) - Update documentation for use of 'perf' + ARM CoreSight (Robert Walker) - Man pages fixes (Sangwon Hong, Jaecheol Shin) - Fix some 'perf test' cases on s/390 and x86_64 (some backtraces changed with a glibc update) (Thomas Richter) - Add detailed CPUID info in the 'perf.data' headers for s/390 to then use it in 'perf annotate' (Thomas Richter) - Add '--interval-count N' to 'perf stat', to use with -I, i.e. 'perf stat -I 1000 --interval-count 2' will show stats every 1000ms, two times (yuzhoujian) - Add 'perf stat --timeout Nms', that will run for that many milliseconds and then stop, printing the counters (yuzhoujian) - Fix description for 'perf report --mem-modex (Andi Kleen) - Use a wildcard to remove the vfs_getname probe in the 'perf test' shell based test cases (Arnaldo Carvalho de Melo) Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 16 Feb, 2018 22 commits
-
-
Arnaldo Carvalho de Melo authored
In some situations the vfs_getname is being added both as requested and with a _1 suffix (inlines?): probe:vfs_getname_1 (on getname_flags:63@acme/git/linux/fs/namei.c with pathname) This ends up making the cleanup to miss that one, as it removes just 'probe:vfs_getname', which makes the second test to use this probe point to fail, since it finds that leftover from the first test, use a wildcard to remove both. Before: # perf test 60 61 62 63 60: Use vfs_getname probe to get syscall args filenames : FAILED! 61: probe libc's inet_pton & backtrace it with ping : Ok 62: Check open filename arg using perf trace + vfs_getname: FAILED! 63: Add vfs_getname probe to get syscall args filenames : Ok After: # perf test 60 61 62 63 60: Use vfs_getname probe to get syscall args filenames : Ok 61: probe libc's inet_pton & backtrace it with ping : Ok 62: Check open filename arg using perf trace + vfs_getname: Ok 63: Add vfs_getname probe to get syscall args filenames : Ok # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-2k5kutwr4ds36adiakyb4yvy@git.kernel.orgSigned-off-by:
-
Thomas Richter authored
Using Fedora 27 and latest Linux kernel the test case trace+probe_libc_inet_pton.sh fails again on s390. This time is the inlining of functions which does not match. After an update of the glibc (from 2.26-16 to 2.26-24) the output is different The expected output is: __inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) .... The actual output is: 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.061/0.061/0.061/0.000 ms 0.000 probe_libc:inet_pton:(3ffb2140448)) __inet_pton (inlined) gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so) ... Fix this by being less strict on 'inlined' verses library name and accept both Signed-off-by: -
Thomas Richter authored
On s390 perf can be executed on a LPAR with support for hardware events (i. e. cycles) or on a z/VM or KVM guest where no hardware events are supported. In this environment use software event named cpu-clock for this test case. Use the cpuid infrastructure functions to determine the cpuid on s390 which contains an indication of the cpu counter facility availability. Signed-off-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180213151419.80737-4-tmricht@linux.vnet.ibm.comSigned-off-by:
-
Thomas Richter authored
The function get_cpuid_str() is called by perf_pmu__getcpuid() and on s390 returns a complete description of the CPU and its capabilities, which is a comma separated list. To map the CPU type with the value defined in the pmu-events/arch/s390/mapfile.csv, introduce an architecture specific cpuid compare function named strcmp_cpuid_str() The currently used regex algorithm is defined as the weak default and will be used if no platform specific one is defined. This matches the current behavior. Signed-off-by:
-
Thomas Richter authored
Scan the cpuid string and extract the type number for later use. Signed-off-by:
-
Thomas Richter authored
When perf record ... is setup to record data, the s390 cpu information was a fixed string "IBM/S390". Replace this string with one containing more information about the machine. The information included in the cpuid is a comma separated list: manufacturer,type,model-capacity,model[,version,authorization] with - manufacturer: up to 16 byte name of the manufacturer (IBM). - type: a four digit number refering to the machine generation. - model-capacitiy: up to 16 characters describing number of cpus etc. - model: up to 16 characters describing model. - version: the CPU-MF counter facility version number, available on LPARs only, omitted on z/VM guests. - authorization: the CPU-MF counter facility authorization level, available on LPARs only, omitted on z/VM guests. Before: [root@s8360047 perf]# ./perf record -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ] [root@s8360047 perf]# ./perf report --header | fgrep cpuid # cpuid : IBM/S390 [root@s8360047 perf]# After: [root@s35lp76 perf]# ./perf report --header|fgrep cpuid # cpuid : IBM,3906,704,M03,3.5,002f [root@s35lp76 perf]# Signed-off-by:
-
Ravi Bangoria authored
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. It also enables users to specify wildcards, for example, perf trace -e 'open*', just like was already possible on x86 and s390. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20180129083417.31240-4-ravi.bangoria@linux.vnet.ibm.com [ Do it for ppc32 as well ] Signed-off-by:
-
Ravi Bangoria authored
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. Signed-off-by:
-
Ravi Bangoria authored
Will be used for generating the syscall id/string translation table. Committer notes: Update it already to catch with these csets applied since Ravi first submitted this patch: 3350eb2e powerpc: sys_pkey_mprotect() system call 9499ec1b powerpc: sys_pkey_alloc() and sys_pkey_free() system calls So now 'perf trace' on ppc now knows about the pkey_ syscals. Signed-off-by:
-
Jiri Olsa authored
Jin Yao reported memory corrupton in perf report with branch info used for stack trace: > Following command lines will cause perf crash. > perf record -j call -g -a <application> > perf report --branch-history > > *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 *** > ======= Backtrace: ========= > /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725] > /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a] > /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc] > perf[0x51b914] > perf(hist_entry_iter__add+0x1e5)[0x51f305] > perf[0x43cf01] > perf[0x4fa3bf] > perf[0x4fa923] > perf[0x4fd396] > perf[0x4f9614] > perf(perf_session__process_events+0x89e)[0x4fc38e] > perf(cmd_report+0x15d2)[0x43f202] > perf[0x4a059f] > perf(main+0x631)[0x427b71] > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830] > perf(_start+0x29)[0x427d89] For the cumulative output, we allocate the he_cache array based on the --max-stack option value and populate it with data from 'callchain_cursor'. The --max-stack option value does not ensure now the limit for number of callchain_cursor nodes, so the cumulative iter code will allocate smaller array than it's actually needed and cause above corruption. I think the --max-stack limit does not apply here anyway, because we add callchain data as normal hist entries, while the --max-stack control the limit of single entry callchain depth. Using the callchain_cursor.nr as he_cache array count to fix this. Also removing struct hist_entry_iter::max_stack, because there's no longer any use for it. We need more fixes to ensure that the branch stack code follows properly the logic of --max-stack, which is not the case at the moment. Original-patch-by:
-
Jin Yao authored
When we use perf report interactive annotate view, we can see the position of jump arrow is not correct. For example, 1. perf record -b ... 2. perf report 3. In interactive mode, select Annotate 'function' Percent│ IPC Cycle │ if (flag) 1.37 │0.4┌── 1 ↓ je 82 │ │ x += x / y + y / x; 0.00 │0.4│ 1310 movsd (%rsp),%xmm0 0.00 │0.4│ 565 movsd 0x8(%rsp),%xmm4 │0.4│ movsd 0x8(%rsp),%xmm1 │0.4│ movsd (%rsp),%xmm3 │0.4│ divsd %xmm4,%xmm0 0.00 │0.4│ 579 divsd %xmm3,%xmm1 │0.4│ movsd (%rsp),%xmm2 │0.4│ addsd %xmm1,%xmm0 │0.4│ addsd %xmm2,%xmm0 0.00 │0.4│ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.4└─→ 82: sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 The jump arrow in above example is not correct. It should add the width of IPC and Cycle. With this patch, the result is: Percent│ IPC Cycle │ if (flag) 1.37 │0.48 1 ┌──je 82 │ │ x += x / y + y / x; 0.00 │0.48 1310 │ movsd (%rsp),%xmm0 0.00 │0.48 565 │ movsd 0x8(%rsp),%xmm4 │0.48 │ movsd 0x8(%rsp),%xmm1 │0.48 │ movsd (%rsp),%xmm3 │0.48 │ divsd %xmm4,%xmm0 0.00 │0.48 579 │ divsd %xmm3,%xmm1 │0.48 │ movsd (%rsp),%xmm2 │0.48 │ addsd %xmm1,%xmm0 │0.48 │ addsd %xmm2,%xmm0 0.00 │0.48 │ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.48 82:└─→sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 Committer notes: Please note that only from LBRv5 (according to Jiri) onwards, i.e. >= Skylake is that we'll have the cycles counts in each branch record entry, so to see the Cycles and IPC columns, and be able to test this patch, one need a capable hardware. While applying this I first tested it on a Broadwell class machine and couldn't get those columns, will add code to the annotate browser to warn the user about that, i.e. you have branch records, but no cycles, use a more recent hardware to get the cycles and IPC columns. Signed-off-by: -
Andi Kleen authored
The "mem-loads" event only works when PEBS is enabled, so add the "/p" ("precise") suffix to the examples. Signed-off-by: -
Robert Walker authored
Add notes on using perf to collect and analyze CoreSight trace Signed-off-by:
Robert Walker <robert.walker@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1518607481-4059-4-git-send-email-robert.walker@arm.comSigned-off-by:
-
Robert Walker authored
There may be discontinuities in the ETM trace stream due to overflows or ETM configuration for selective trace. This patch emits an instruction sample with the pending branch stack when a TRACE ON packet occurs indicating a discontinuity in the trace data. A new packet type CS_ETM_TRACE_ON is added, which is emitted by the low level decoder when a TRACE ON occurs. The higher level decoder flushes the branch stack when this packet is emitted. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1518607481-4059-3-git-send-email-robert.walker@arm.comSigned-off-by:
-
Robert Walker authored
Added user space perf functionality to translate CoreSight traces into instruction events with branch stack. To invoke the new functionality, use the perf inject tool with --itrace=il. For example, to translate the ETM trace from perf.data into last branch records in a new inj.data file: $ perf inject --itrace=i100000il128 -i perf.data -o perf.data.new The 'i' parameter to itrace generates periodic instruction events. The period between instruction events can be specified as a number of instructions suffixed by i (default 100000). The parameter to 'l' specifies the number of entries in the branch stack attached to instruction events. The 'b' parameter to itrace generates events on taken branches. This patch also fixes the contents of the branch events used in perf report - previously branch events were generated for each contiguous range of instructions executed. These are fixed to generate branch events between the last address of a range ending in an executed branch instruction and the start address of the next range. Based on patches by Sebastian Pop <s.pop@samsung.com> with additional fixes and support for specifying the instruction period. Originally-by:Sebastian Pop <s.pop@samsung.com> Signed-off-by:
-
Sangwon Hong authored
Add the missing --force option on the man page. Signed-off-by:
-
Sangwon Hong authored
First, 'perf kmem' has a '--force' option, but didn't document it on the man page. So add it. Second, the '--time' option has to get a value, but isn't documented on the man page. Describe it. Signed-off-by:
-
Jaecheol Shin authored
Some options must require an argument. But input, stdio-color, cpu have no them. So I added it. Signed-off-by:
Jaecheol Shin <jcgod413@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/20180207095205.62715-1-jcgod413@gmail.comSigned-off-by:
-
Mathieu Poirier authored
This patch allows the CoreSight AUX info section to fit topologies where only a subset of all available CPUs are present, avoiding at the same time accessing the ETM configuration areas of CPUs that have been offlined. Signed-off-by:
-
Mathieu Poirier authored
When working natively on arm64 the compiler gets pesky and complains that variable 'i' is uninitialised, something that breaks the compilation. Here no further checks are needed since variable 'found_spe' can only be true if variable 'i' has been initialised as part of the for loop. Signed-off-by:
-
Jin Yao authored
Mathieu Poirier reports issue in commit ("73c0ca1e perf thread_map: Enumerate all threads from /proc") that it has negative impact on 'perf record --per-thread'. It has the effect of creating a kernel event for each thread in the system for 'perf record --per-thread'. Mathieu Poirier's patch ("perf util: Do not reuse target->per_thread flag") can fix this issue by creating a new target->all_threads flag. This patch is based on Mathieu Poirier's patch but it doesn't use a new target->all_threads flag. This patch just uses 'target->per_thread && target->system_wide' as a condition to check for all threads case. Signed-off-by: -
Mathieu Poirier authored
This patch frees all the memory allocated in function cs_etm__alloc_queue(). Signed-off-by:
-
