- 25 Jan, 2008 40 commits
-
-
Randy Dunlap authored
isapnp_fmi_probe() is only called by fmi_init(), which is __init, so isapnp_fmi_probe() can also be __init. media/radio/radio-sf16fmi.c: WARNING: vmlinux.o(.text+0x994e19): Section mismatch: reference to .init.data: (between 'isapnp_fmi_probe' and 'vidioc_s_tuner') WARNING: vmlinux.o(.text+0x994e22): Section mismatch: reference to .init.data: (between 'isapnp_fmi_probe' and 'vidioc_s_tuner') WARNING: vmlinux.o(.text+0x994e3a): Section mismatch: reference to .init.data:id_table (between 'isapnp_fmi_probe' and 'vidioc_s_tuner') Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Akinobu Mita authored
This patch moves the subsystem ID and subsystem vendor ID check from probing function to the PCI generic function by describing subsystem IDs in pci_device_id table. This enables to add new PCI IDs to a device driver pci_ids table at runtime by new_id file in sysfs pci driver tree. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
Manu Abraham <manu@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
Make a local function static Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
-
Patrick Boettcher authored
Tuning problem for 7Mhz channels fixes Signed-off-by:
-
Patrick Boettcher authored
Removing two bugs to improve sensitivity for DiB7070 and Dib7000P with MT2266. Signed-off-by:
-
Olivier DANET authored
Here is a patch for Hauppage Nova-T-Stick and Nova-T-500 users. It sets the MT2060 IF1 frequency according to the calibration values stored in the EEPROM. It is supposed to enhance the signal quality, but, hey, there is no guarantee. Feedbacks would be much appreciated, to know whether it deserves being applied. Signed-off-by: Olivier DANET <odanet at caramail.com> Signed-off-by:
-
Patrick Boettcher authored
There was a mistake in the way how to start the streaming in the dib0700. This patch fixes that. Signed-off-by:
-
Soeren Moch authored
The attached patch solves all my vdr tuning problems on a dib7000p nova-t stick as far as I could check within the last weekend. It disables streaming while tuning, like that the number of faulty TS packets is reduced. Signed-off-by:
Soeren Moch <Soeren.Moch@stud.uni-hannover.de> Signed-off-by:
-
Darren Salt authored
Here's a roll-up which provides support for both this and the myTV.t. Signed-off-by:
Darren Salt <linux@youmustbejoking.demon.co.uk> Signed-off-by:
-
Tim Taubert authored
Add support for WinTV Nova-T-CE driver Signed-off-by:
Tim Taubert <ttmails@gmx.de> Signed-off-by:
-
Jose Alberto Reguero authored
This patch fix autoserach in the Hauppauge NOVA-T 500. Signed-off-by:
Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by:
-
Daniel Gimpelevich authored
Adding support for ASUS My Cinema U3000 Mini DVBT Tuner Signed-off-by:
Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Signed-off-by:
-
Yousef Lamlum authored
Added Artec T14BR support Signed-off-by:
Yousef Lamlum <yousef@youseflamlum.com> Signed-off-by:
-
Steven Toth authored
xc5000: Fix OOPS caused by missing firmware. Signed-off-by:
Chaogui Zhang <czhang1974@gmail.com> Acked-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Tobias Lorenz authored
- avoid poss. locking when doing copy_to_user which may sleep - RDS is automatically activated on read now - code cleaned of unnecessary rds_commands - USB Vendor/Product ID for ADS/Tech FM Radio Receiver verified (thanks to Guillaume RAMOUSSE) Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Tobias Lorenz authored
- code reordered to avoid function prototypes - switch/case defaults are now more user-friendly - unified comment style - applied all checkpatch.pl v1.12 suggestions except the warning about the too long lines with bit comments - renamed FMRADIO to RADIO to cut line length (checkpatch.pl) Signed-off-by:
-
Mauro Carvalho Chehab authored
has_tuner flag doesn't make much sense, since tuner_type=TUNER_ABSENT means the same thing. Having two ways to say that a tuner is not present is not nice, since it may lead to bad setups. In fact, with the previous code, if a device were using has_tuner=0, but the user forces a tuner, with modprobe option tuner=type, the modprobe option won't work. Also, tveeprom returns TUNER_ABSENT, when tuner is unknown or absent. So, with the previous logic, in this case, the driver should set has_tuner=0, or has_tuner=1 otherwise. Instead of adding several additional tests and setups, better just to remove .has_tuner. Signed-off-by: -
Steven Toth authored
Previous patches assume the tuner was on a different gpio. This patch corrects this. Signed-off-by:
-
Steven Toth authored
IR corrections for the Pinnacle 800i Signed-off-by:
-
Michael Krufky authored
We already know that the XC5000 tuner can only be located at i2c address 0x61, 0x62, 0x63 or 0x64 We shouldn't display this warning if the XC5000 tuner is present. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Change TDA9887 to tda9887. TDA8290 shall reflect the actual hardware present in its name, ie: tda8295+18271 tda8290+8275a Signed-off-by:
-
Luca Olivetti authored
Marcos Melero (marcosmelero at gmail.com) reported he could make his dvb-t usb stick work with the af9005 driver by changing the device ids (10b9:6000). The stick is branded "Ansonic" (one of the brands of a spanish chain of supermarkets) with no other identification of the model. Since neither Marcos nor me know the OEM for the stick, in the attached patch I used Ansonic for the ids/description. Signed-off-by:
Luca Olivetti <luca@ventoso.org> Signed-off-by:
-
Michael Krufky authored
Call analog_ops.standby during tda18271_set_params, to put the tda8295 in tri-state when tuning digital channels. Otherwise the tda8295 will interfere with the signal coming from the tda18271 into the digital demodulator. Signed-off-by:
-
Mauro Carvalho Chehab authored
state is already NULL. Reviewed-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Steven Toth authored
Correctly set the atatch structures, enable IR, configure the xc5000 tuner includes. Signed-off-by:
-
Steven Toth authored
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by:
-
Steven Toth authored
From Zhang: This patch fixes support for the HVR1500Q which was broken when the xc5000 analog patch was added. Patch committed as-is, cleanups to follows .... Steve Signed-off-by:
-
Steven Toth authored
From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by:
-
Steven Toth authored
From Zhang: This an updated patch that adds analog support for the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i card (patches to follow). Patch commited as-is, cleanup to follow ... Steve. Signed-off-by:
-
Steven Toth authored
Parallel support was not working with the s5h1409 and the Pinnacle HD800i. This patch fixes the demodulator driver and ensures that all existing s5h1409 based products configure the demodulator correctly. Signed-off-by:
-
Mauro Carvalho Chehab authored
The backports weren't tested, but compile fine. Signed-off-by: -
Tobias Lorenz authored
this patch adds a new driver for the Silicon Labs Si470x FM Radio Receiver. It should also work for the identical ADS/Tech FM Radio Receiver (formerly Instant FM Music) as soon as I find out the USB Vendor and Product ID. The driver is inspired by several other USB and radio drivers, but mainly from the D-Link DSB-R100 USB radio (dsbr100.c). The USB stick currently has an Si4701 FM RDS radio receiver. But the other Si470x devices are pin and register compatible, so that in the future the driver can easily be patched to support these too. Therefore I named the driver radio-si470x and the configuration option usb-si470x. The driver itself just provides the control function over the radio. For getting audio back, the device support the USB audio class, which is implemented in the already existing driver. I tested the driver in the last days, until it now satisfies all my functionality and robustness requirements. The application I used for testing was kradio. Signed-off-by:
-
Zoltan Devai authored
Signed-off-by:
Zoltan Devai <zdevai@gmail.com> Signed-off-by:
-
Julia Lawall authored
The file drivers/media/video/videodev.c defines both video_device_alloc and video_device_release. These are essentially just kzmalloc and kfree, respectively, but it seems better to use video_device_release, as done in the other media files, rather than kfree, in case the implementation some day changes. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = video_device_alloc(...); if (E == NULL) S ... when != video_device_release(...,(T1)E,...) when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != video_device_release(...,(T2)E,...) when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Video_device_alloc returns the result of a kzalloc. In this case, the value is stored in a local variable which is not copied elsewhere before the point of the error return (video_register_device does not save its first argument anywhere if it returns a negative value). Thus, a video_device_release it needed before the error return. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = video_device_alloc(...); if (E == NULL) S ... when != video_device_release(...,(T1)E,...) when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != video_device_release(...,(T2)E,...) when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> CC: Oliver Endriss <o.endriss@gmx.de> CC: Michael Hunold <michael@mihu.de> Signed-off-by:
-
Michael Krufky authored
This module option variable is only handled within the file tda18271-fe.c - Declare this variable as static. Signed-off-by:
-
Michael Krufky authored
VIDEO_PVRUSB2 must select: VIDEO_SAA711X, VIDEO_CX25840, VIDEO_MSP3400, and VIDEO_WM8775 Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Michael Krufky authored
If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration sequence will be invoked on startup. Otherwise, the calibration will take place during the first tune. Signed-off-by:
-
Michael Krufky authored
Test RF_CAL_OK to see if we need to perform the RF tracking filter calibration after returning from standby. Signed-off-by:
-
