- 16 Feb, 2017 2 commits
-
-
Jeeja KP authored
The ELD notification can be received asynchronously from the graphics side and this may happen just at the moment the sound driver is initializing and notification will be missed. Similarly at system resume, the notification is ignored as the ELD and connection states are updated in anyway at the end of the resume. So check the jack status in boot/resume by querying the port presence based on pin caps and report the jack status. Signed-off-by:
Jeeja KP <jeeja.kp@intel.com> Acked-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Jeeja KP authored
To support DP MST audio, new pin verbs/params are added. This patch adds helper functions to do following: o To set a specific port o To get the currently selected port o To get the length of port. Signed-off-by:
-
- 08 Feb, 2017 5 commits
-
-
Jeeja KP authored
To handle jack event and configuration of the pin widget for MST capable pin, this patch adds: o Flag to identify the pin is MST capable. o In notify callback(), based on the pipe and port information marks if the port is mst_capable. In case of non MST, port is defaulted to zero. Signed-off-by:
-
Jeeja KP authored
To support MST moved pin to port, this changes the routes based on port. So change the route in nau88l25_ssm4567 machine. Signed-off-by:
-
Jeeja KP authored
To support MST moved pin to port, this changes the routes based on port. So change the route in nau88l25_max98357a machine. Signed-off-by:
-
Jeeja KP authored
To support MST moved pin to port, this changes the routes based on port. So change the route in bxt_rt298 machine. Signed-off-by:
-
Jeeja KP authored
With MST each pin contains several ports to which device can be connected. As a preparatory work to support DP MST this patch adds below changes: 1. Defines the port structure and moves all stream related information like ELD, converter list, chmap to port. 2. Creates ports for each pin based on the max_ports support. 3. Based on Pin-Port combination creates DAPM Mux widget instead of Pin to allow user to select a converter. 4. Port zero is the default port when pin does not support MST. Signed-off-by:
-
- 04 Feb, 2017 6 commits
-
-
Subhransu S. Prusty authored
This patch create entry in sysfs file system to report the platform_id = "pci-id-oem_id-oem_table_id-oem_revision" for board identification. Signed-off-by:
Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by:
Sodhi, VunnyX <vunnyx.sodhi@intel.com> Signed-off-by:
-
Jeeja KP authored
HDMI registers channel map controls per PCM. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which also registers channel map in the late probe callback handler. Signed-off-by:
-
Jeeja KP authored
To support MST moved pin to port, this changes the routes based on port. So change the route in bxt_da7219_max98357a machine. Signed-off-by:
-
Jeeja KP authored
To support MST moved pin to port, this changes the routes based on port. So change the route in skl_rt286 machine. Signed-off-by:
-
Jeeja KP authored
HDMI registers channel map controls per pcm. As PCMs are not registered during dai_link init callback, store the pcm ids and codec DAIs during this init callback. Register for late probe and call the jack_init API which registers channel map in the late probe callback handler. Signed-off-by:
-
Jeeja KP authored
Channel info is part of the pcm parameter and channel map control is created for each pcm. So move channel info to pcm instead of pin structure and the mutex lock to pcm. Signed-off-by:
-
- 01 Feb, 2017 1 commit
-
-
Pierre-Louis Bossart authored
Missed unused variable in previous changes, oops. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
- 31 Jan, 2017 18 commits
-
-
Pierre-Louis Bossart authored
Remove default and set I2S mode correctly both on codec and cpu sides Signed-off-by:
-
Pierre-Louis Bossart authored
Use ACPI ID 10EC3270 to load machine driver for cht-bsw-rt5645 and add reference to 3270 to use the rt5645 mode Tested on Asus T100HA Signed-off-by:
-
Pierre-Louis Bossart authored
Some platforms use AIF2, use routing information to set ASRC as needed Suggested-by:
Bard Liao <bardliao@realtek.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681Signed-off-by:
-
Pierre-Louis Bossart authored
This driver may be used on Baytrail CR platforms where SSP2 is not available. Add quirks and routing detection based on work done for RT5640. Signed-off-by:
-
Pierre-Louis Bossart authored
ALC3270 is a low-cost version of RT5645, add ACPI ID to enable probe and use rt5645 codec driver Tested on Asus T100HA Signed-off-by:
-
Pierre-Louis Bossart authored
the BIOS reports this codec as RT5640 but it's a rt5670. Use the quirk mechanism to use the cht_bsw_rt5672 machine driver Signed-off-by:
-
Pierre-Louis Bossart authored
Fix classic issue of having multiple codecs listed in DSDT but a single one actually enabled. The previous code did not handle such errors and could also lead to uninitalized configurations Signed-off-by:
-
Pierre-Louis Bossart authored
Use machine driver initially defined for CherryTrail Signed-off-by:
-
Pierre-Louis Bossart authored
add ACPI ID 10EC5648 found e.g on Asus X205TA and use rt5645 driver Signed-off-by:
-
Pierre-Louis Bossart authored
the BIOS incorrectly reports this codec as 5640 but it is really a rt5670 Signed-off-by:
-
Pierre-Louis Bossart authored
RT5651 is used on some Cherrytrail platforms, add the ACPI ID in machine table. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156191Signed-off-by:
-
Alexandrov Stansilav authored
Add machine entry for HP X2 Pavilion 10-p100. This notebook contains rt5640 codec, but with ACPI ID "10EC3276". Signed-off-by:
Alexandrov Stansilav <neko@nya.ai> Signed-off-by:
-
Alexandrov Stansilav authored
Add ACPI ID "10EC3276" for sound card found on notebook HP Pavilion X2 10-p000. ACPI DSDT Table on this device describes this card as ALC3276, but it is in fact rt5640. Signed-off-by:
-
Pierre-Louis Bossart authored
The existing code assumes a 19.2 MHz MCLK as the default hardware configuration. This is valid for CherryTrail but not for Baytrail. Add explicit MCLK configuration to set the 19.2 clock on/off depending on DAPM events. This is a prerequisite step to enable devices with Baytrail and RT5645 such as Asus X205TA Signed-off-by:
-
Mark Brown authored
Merge branch 'fix/intel' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
Pierre-Louis Bossart authored
The current frame sync polarity definitions are inconsistent in the Atom/DPCM driver, fix to align with regular ASoC definitions and update code in platform and machine drivers for RT5640 and RT5651. Signed-off-by:
-
Pierre-Louis Bossart authored
This patch corrects an omission in bytcr_rt5640 and bytcr_rt5651. All existing machine drivers shall not use .pm_ops to avoid a double suspend, as initially implemented by 3f2dcbea ("ASoC: Intel: Remove soc pm handling to allow platform driver handle it"). Reported-by:
Shrirang Bagul <shrirang.bagul@canonical.com> Signed-off-by:
-
Sebastien Guiriec authored
Most of the devices are using stereo speakers so media_loop1 and sprot_loop default mode should be stereo. As per default all the routing UCM configuration doesn't enable Post processing loops it is not impacting curent configurations. Signed-off-by:
Sebastien Guiriec <sebastien.guiriec@intel.com> Acked-by:
-
- 26 Jan, 2017 1 commit
-
-
Mark Brown authored
Merge branch 'topic/hdac-hdmi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
-
- 24 Jan, 2017 3 commits
-
-
Jeeja KP authored
DMA channel(stream tag) used by the HDA link need to programmed in codec so that codec receives packet from the link associated with the same channel. DMA channel is allocated in link BE dai hw_params, the same needs to be set for the BE codec dai. Instead of using get/set dma_data(), use dai_ops snd_soc_dai_set_tdm_slot() to set the stream tag. Signed-off-by:
-
Jeeja KP authored
In case of hdmi connect/disconnect or when stream need to be route to multiple monitors, corresponding port and audio infoframe needs to be reconfigured. Currently all the configuration are done in DAI ops which results in silence playback. So use dapm widget event handlers to program audio infoframe and enable /disable port configuration when widget is power on/off. Signed-off-by:
-
Mark Brown authored
Linux 4.10-rc1
-
- 20 Jan, 2017 1 commit
-
-
Sandeep Tayal authored
With codec read sometimes the pin_sense shows invalid monitor present and eld_valid. Currently driver polls for few times to get the valid eld data. To avoid the latency, Instead of reading ELD from codec, read it directly from the display driver using audio component framework. and removed the unused direct codec helper functions. Signed-off-by:
Sandeep Tayal <sandeepx.tayal@intel.com> Signed-off-by:
-
- 19 Jan, 2017 3 commits
-
-
Yong Zhi authored
When Ref capture is used during S0IX, only the DSP pipelines are needed, thus remove the ignore_suspend for WoV streams so that DMA can be suspended, but keep them for WoV endpoints. Signed-off-by:
Yong Zhi <yong.zhi@intel.com> Acked-by:
-
Jeeja KP authored
Instead of enabling pin and cvt in pcm_open(), need to restore pin and cvt state after system resume to restart the playback which is paused/stopped before system suspend. So enable pin and cvt in playback_prepare and call prepare when trigger cmd is paused/started and resume to reconfigure pin and cvt. Signed-off-by:
Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by:
-
Jeeja KP authored
In system suspend, the firmware pipelines will be deleted and there is no need to save the pipeline context. Driver will save the DPIB and LPIB pointers in suspend. In system resume, the firmware pipelines will be created again and the RD/RW pointers in the Firmware buffer points to the base address. So need to fetch the non-played data again to firmware buffer. LPIB indicates the HW rendered position. Instead of setting DPIB as resume point, set it to LPIB to restore from the HW render position so that DMA would fetch the non-played data one more time. Signed-off-by:
-
