- 02 May, 2017 40 commits
-
-
Juergen Gross authored
When running as pv domain xen_cpuid() is being used instead of native_cpuid(). In xen_cpuid() the acc feature (thermal monitoring) is indicated as not being present by special casing the related cpuid leaf. Instead of delivering fake cpuid values clear the cpu capability bit for acc instead. Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
-
Juergen Gross authored
When running as pv domain xen_cpuid() is being used instead of native_cpuid(). In xen_cpuid() the mtrr feature is indicated as not being present by special casing the related cpuid leaf. Instead of delivering fake cpuid values clear the cpu capability bit for mtrr instead. Signed-off-by:
-
Juergen Gross authored
When running as pv domain xen_cpuid() is being used instead of native_cpuid(). In xen_cpuid() the aperf/mperf feature is indicated as not being present by special casing the related cpuid leaf. Instead of delivering fake cpuid values clear the cpu capability bit for aperf/mperf instead. Signed-off-by:
-
Juergen Gross authored
Xen doesn't support DCA (direct cache access) for pv domains. Clear the corresponding capability indicator. Signed-off-by:
-
Juergen Gross authored
There is no need to set the same capabilities for each cpu individually. This can easily be done for all cpus when starting the kernel. Signed-off-by:
-
Stefano Stabellini authored
In order to use "len" to check for xenbus_read errors properly, we need to initialize len to 0 before passing it to xenbus_read. CC: dan.carpenter@oracle.com CC: jgross@suse.com CC: boris.ostrovsky@oracle.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by:
Stefano Stabellini <stefano@aporeto.com> Reviewed-by:
-
Juergen Gross authored
For kdump to work correctly it needs the physical address of vmcoreinfo_note. When running as dom0 this means the virtual address has to be translated to the related machine address. paddr_vmcoreinfo_note() is meant to do the translation via __pa_symbol() only, but being attributed "weak" it can be replaced easily in Xen case. Signed-off-by:
Petr Tesarik <ptesarik@suse.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by:
-
Oleksandr Andrushchenko authored
This is the ABI for the two halves of a para-virtualized display driver. This protocol aims to provide a unified protocol which fits more sophisticated use-cases than a framebuffer device can handle. At the moment basic functionality is supported with the intention to extend: o multiple dynamically allocated/destroyed framebuffers o buffers of arbitrary sizes o better configuration options including multiple display support Note: existing fbif can be used together with displif running at the same time, e.g. on Linux one provides framebuffer and another DRM/KMS Future extensions to the existing protocol may include: o allow display/connector cloning o allow allocating objects other than display buffers o add planes/overlays support o support scaling o support rotation Note, that this protocol doesn't use ring macros for bi-directional exchange (PV calls/9pfs) bacause: o it statically defines the use of a single page for the ring buffer o it uses direct memory access to ring's contents w/o memory copying o re-uses the same idea that kbdif/fbif use which for this use-case seems to be appropriate ================================================== Rationale for introducing this protocol instead of using the existing fbif: ================================================== 1. In/out event sizes o fbif - 40 octets o displif - 40 octets This is only the initial version of the displif protocol which means that there could be requests which will not fit (WRT introducing some GPU related functionality later on). In that case we cannot alter fbif sizes as we need to be backward compatible an will be forced to handle those apart of fbif. 2. Shared page Displif doesn't use anything like struct xenfb_page, but DEFINE_RING_TYPES(xen_displif, struct xendispl_req, struct xendispl_resp) which is a better and more common way. Output events use a shared page which only has in_cons and in_prod and all the rest is used for incoming events. Here struct xenfb_page could probably be used as is despite the fact that it only has a half of a page for incoming events which is only 50 events. (consider something like 60Hz display) 3. Amount of changes. fbif only provides XENFB_TYPE_UPDATE and XENFB_TYPE_RESIZE events, so it looks like it is easier to get fb support into displif than vice versa. displif at the moment has 6 requests and 1 event, multiple connector support, etc. Signed-off-by:Oleksandr Grytsov <oleksandr_grytsov@epam.com> Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by:
-
Oleksandr Andrushchenko authored
Add ABI for the two halves of a para-virtualized sound driver to communicate with each other. The ABI allows implementing audio playback and capture as well as volume control and possibility to mute/unmute audio sources. Note: depending on the use-case backend can expose more sound cards and PCM devices/streams than the underlying HW physically has by employing SW mixers, configuring virtual sound streams, channels etc. Thus, allowing fine tunned configurations per frontend. Signed-off-by:
Oleksandr Dmytryshyn <oleksandr.dmytryshyn@globallogic.com> Signed-off-by:
Iurii Konovalenko <iurii.konovalenko@globallogic.com> Acked-by:
-
Oleksandr Andrushchenko authored
Multi-touch fields re-use the page that is used by the other features which means that you can interleave multi-touch, motion, and key events. Signed-off-by:
-
Oleksandr Andrushchenko authored
The patch clarifies the protocol that is used by the PV keyboard drivers. Signed-off-by:
-
Stefano Stabellini authored
This patch adds a Kconfig option and Makefile support for building the 9pfs Xen driver. CC: groug@kaod.org CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by:
-
Stefano Stabellini authored
Upon receiving a notification from the backend, schedule the p9_xen_response work_struct. p9_xen_response checks if any responses are available, if so, it reads them one by one, calling p9_client_cb to send them up to the 9p layer (p9_client_cb completes the request). Handle the ring following the Xen 9pfs specification. CC: groug@kaod.org CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by:
-
Stefano Stabellini authored
Implement struct p9_trans_module create and close functions by looking at the available Xen 9pfs frontend-backend connections. We don't expect many frontend-backend connections, thus walking a list is OK. Send requests to the backend by copying each request to one of the available rings (each frontend-backend connection comes with multiple rings). Handle the ring and notifications following the 9pfs specification. If there are not enough free bytes on the ring for the request, wait on the wait_queue: the backend will send a notification after consuming more requests. CC: groug@kaod.org CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by:
-
Stefano Stabellini authored
Implement functions to handle the xenbus handshake. Upon connection, allocate the rings according to the protocol specification. Initialize a work_struct and a wait_queue. The work_struct will be used to schedule work upon receiving an event channel notification from the backend. The wait_queue will be used to wait when the ring is full and we need to send a new request. CC: groug@kaod.org CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by:
-
Stefano Stabellini authored
Introduce the Xen 9pfs transport driver: add struct xenbus_driver to register as a xenbus driver and add struct p9_trans_module to register as v9fs driver. All functions are empty stubs for now. CC: groug@kaod.org CC: jgross@suse.com CC: Eric Van Hensbergen <ericvh@gmail.com> CC: Ron Minnich <rminnich@sandia.gov> CC: Latchesar Ionkov <lucho@ionkov.net> CC: v9fs-developer@lists.sourceforge.net Signed-off-by:
-
Stefano Stabellini authored
It uses the new ring.h macros to declare rings and interfaces. CC: konrad.wilk@oracle.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: groug@kaod.org Signed-off-by:
-
Stefano Stabellini authored
Sync the ring.h file with upstream Xen, to introduce the new ring macros. They will be used by the Xen transport for 9pfs. CC: konrad.wilk@oracle.com CC: boris.ostrovsky@oracle.com CC: jgross@suse.com CC: groug@kaod.org Signed-off-by:
-
Juergen Gross authored
xen_call_function_interrupt() isn't used in smp_pv.c. Remove it. Signed-off-by: -
Vitaly Kuznetsov authored
After code split between PV and HVM some functions in xen_smp_ops have xen_pv_ prefix and some only xen_ which makes them look like they're common for both PV and HVM while they're not. Rename all the rest to have xen_pv_ prefix. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
-
Vitaly Kuznetsov authored
Now everything is in place and we can move PV-only code under CONFIG_XEN_PV. CONFIG_XEN_PV_SMP is created to support the change. Signed-off-by:
-
Vitaly Kuznetsov authored
xen_create_contiguous_region()/xen_create_contiguous_region() are PV-only, they both contain xen_feature(XENFEAT_auto_translated_physmap) check and bail in the very beginning. Signed-off-by:
-
Vitaly Kuznetsov authored
Balloon driver uses several PV-only concepts (xen_start_info, xen_extra_mem,..) and it seems the simpliest solution to make HVM-only build happy is to decorate these parts with #ifdefs. Signed-off-by:
-
Vitaly Kuznetsov authored
__pfn_to_mfn() is only used from PV code (mmu_pv.c, p2m.c) and from page.h where all functions calling it check for xen_feature(XENFEAT_auto_translated_physmap) first so we can replace it with any stub to make build happy. set_foreign_p2m_mapping()/clear_foreign_p2m_mapping() are used from grant-table.c but only if !xen_feature(XENFEAT_auto_translated_physmap). Signed-off-by:
-
Vitaly Kuznetsov authored
startup_xen references PV-only code, decorate it with #ifdef CONFIG_XEN_PV to make PV-free builds possible. Signed-off-by:
-
Vitaly Kuznetsov authored
xen_pmu_init/finish() functions are used in suspend.c and enlighten.c, add stubs for now. Signed-off-by:
-
Vitaly Kuznetsov authored
Slit the code in suspend.c into suspend_pv.c and suspend_hvm.c. Signed-off-by:
-
Vitaly Kuznetsov authored
Basically, mmu.c is renamed to mmu_pv.c and some code moved out to common mmu.c. Signed-off-by:
-
Vitaly Kuznetsov authored
Move PVHVM related code to mmu_hvm.c. Signed-off-by:
-
Vitaly Kuznetsov authored
Basically, smp.c is renamed to smp_pv.c and some code moved out to common smp.c. struct xen_common_irq delcaration ended up in smp.h. Signed-off-by:
-
Vitaly Kuznetsov authored
Move PVHVM related code to smp_hvm.c. Drop 'static' qualifier from xen_smp_send_reschedule(), xen_smp_send_call_function_ipi(), xen_smp_send_call_function_single_ipi(), these functions will be moved to common smp code when smp_pv.c is split. Signed-off-by:
-
Vitaly Kuznetsov authored
Split xen_cpu_die() into xen_pv_cpu_die() and xen_hvm_cpu_die() to support further splitting of smp.c. Signed-off-by:
-
Vitaly Kuznetsov authored
Split xen_smp_prepare_boot_cpu() into xen_pv_smp_prepare_boot_cpu() and xen_hvm_smp_prepare_boot_cpu() to support further splitting of smp.c. Signed-off-by:
-
Vitaly Kuznetsov authored
xen_smp_intr_init() and xen_smp_intr_free() have PV-specific code and as a praparatory change to splitting smp.c we need to split these fucntions. Create xen_smp_intr_init_pv()/xen_smp_intr_free_pv(). Signed-off-by:
-
Vitaly Kuznetsov authored
Basically, enlighten.c is renamed to enlighten_pv.c and some code moved out to common enlighten.c. Signed-off-by:
-
Vitaly Kuznetsov authored
Move PVHVM related code to enlighten_hvm.c. Three functions: xen_cpuhp_setup(), xen_reboot(), xen_emergency_restart() are shared, drop static qualifier from them. These functions will go to common code once it is split from enlighten.c. Signed-off-by:
-
Vitaly Kuznetsov authored
Create enlighten_pvh.c by splitting off PVH related code from enlighten.c, put it under CONFIG_XEN_PVH. Signed-off-by:
-
Vitaly Kuznetsov authored
All code to support Xen PV will get under this new option. For the beginning, check for it in the common code. Signed-off-by:
-
Vitaly Kuznetsov authored
have_vcpu_info_placement applies to both PV and HVM and as we're going to split the code we need to make it global. Rename to xen_have_vcpu_info_placement. Signed-off-by:
-
Vitaly Kuznetsov authored
As a preparation to splitting the code we need to untangle it: x86_hyper_xen -> x86_hyper_xen_hvm and x86_hyper_xen_pv xen_platform() -> xen_platform_hvm() and xen_platform_pv() xen_cpu_up_prepare() -> xen_cpu_up_prepare_pv() and xen_cpu_up_prepare_hvm() xen_cpu_dead() -> xen_cpu_dead_pv() and xen_cpu_dead_pv_hvm() Add two parameters to xen_cpuhp_setup() to pass proper cpu_up_prepare and cpu_dead hooks. xen_set_cpu_features() is now PV-only so the redundant xen_pv_domain() check can be dropped. Signed-off-by:
-
