- 26 Apr, 2011 6 commits
-
-
Seth Heasley authored
This patch adds the TCO Watchdog DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
-
git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6: eCryptfs: Flush dirty pages in setattr eCryptfs: Handle failed metadata read in lookup eCryptfs: Add reference counting to lower files eCryptfs: dput dentries returned from dget_parent eCryptfs: Remove extra d_delete in ecryptfs_rmdir
-
Linus Torvalds authored
Merge branch 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: rtc: fix coh901331 startup crash mach-ux500: fix i2c0 device setup regression
-
Eric Paris authored
Now that the security modules can decide whether they support the dcache RCU walk or not it's possible to make selinux a bit more RCU friendly. The SELinux AVC and security server access decision code is RCU safe. A specific piece of the LSM audit code may not be RCU safe. This patch makes the VFS RCU walk retry if it would hit the non RCU safe chunk of code. It will normally just work under RCU. This is done simply by passing the VFS RCU state as a flag down into the avc_audit() code and returning ECHILD there if it would have an issue. Based-on-patch-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Eric Paris <eparis@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Christoph Hellwig authored
Now that the whole dcache_hash_bucket crap is gone, go all the way and also remove the weird locking layering violations for locking the hash buckets. Add hlist_bl_lock/unlock helpers to move the locking into the list abstraction instead of requiring each caller to open code it. After all allowing for the bit locks is the whole point of these helpers over the plain hlist variant. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
When we are waiting for the bit-lock to be released, and are looping over the 'cpu_relax()' should not be doing anything else - otherwise we miss the point of trying to do the whole 'cpu_relax()'. Do the preemption enable/disable around the loop, rather than inside of it. Noticed when I was looking at the code generation for the dcache __d_drop usage, and the code just looked very odd. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 25 Apr, 2011 5 commits
-
-
Tyler Hicks authored
After 57db4e8d changed eCryptfs to write-back caching, eCryptfs page writeback updates the lower inode times due to the use of vfs_write() on the lower file. To preserve inode metadata changes, such as 'cp -p' does with utimensat(), we need to flush all dirty pages early in ecryptfs_setattr() so that the user-updated lower inode metadata isn't clobbered later in writeback. https://bugzilla.kernel.org/show_bug.cgi?id=33372Reported-by: Rocko <rockorequin@hotmail.com> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
Tyler Hicks authored
When failing to read the lower file's crypto metadata during a lookup, eCryptfs must continue on without throwing an error. For example, there may be a plaintext file in the lower mount point that the user wants to delete through the eCryptfs mount. If an error is encountered while reading the metadata in lookup(), the eCryptfs inode's size could be incorrect. We must be sure to reread the plaintext inode size from the metadata when performing an open() or setattr(). The metadata is already being read in those paths, so this adds minimal performance overhead. This patch introduces a flag which will track whether or not the plaintext inode size has been read so that an incorrect i_size can be fixed in the open() or setattr() paths. https://bugs.launchpad.net/bugs/509180 Cc: <stable@kernel.org> Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
Tyler Hicks authored
For any given lower inode, eCryptfs keeps only one lower file open and multiplexes all eCryptfs file operations through that lower file. The lower file was considered "persistent" and stayed open from the first lookup through the lifetime of the inode. This patch keeps the notion of a single, per-inode lower file, but adds reference counting around the lower file so that it is closed when not currently in use. If the reference count is at 0 when an operation (such as open, create, etc.) needs to use the lower file, a new lower file is opened. Since the file is no longer persistent, all references to the term persistent file are changed to lower file. Locking is added around the sections of code that opens the lower file and assign the pointer in the inode info, as well as the code the fputs the lower file when all eCryptfs users are done with it. This patch is needed to fix issues, when mounted on top of the NFSv3 client, where the lower file is left silly renamed until the eCryptfs inode is destroyed. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
Tyler Hicks authored
Call dput on the dentries previously returned by dget_parent() in ecryptfs_rename(). This is needed for supported eCryptfs mounts on top of the NFSv3 client. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
Tyler Hicks authored
vfs_rmdir() already calls d_delete() on the lower dentry. That was being duplicated in ecryptfs_rmdir() and caused a NULL pointer dereference when NFSv3 was the lower filesystem. Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
-
- 24 Apr, 2011 17 commits
-
-
Linus Torvalds authored
* dcache-cleanup: vfs: get rid of insane dentry hashing rules
-
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-devLinus Torvalds authored
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: ahci_start_engine compliant to AHCI spec ata: pata_at91.c bugfix for initial_timing initialisation ata: pata_at91.c bugfix for high master clock ahci: AHCI-mode SATA patch for Intel Panther Point DeviceIDs ata_piix: IDE-mode SATA patch for Intel Panther Point DeviceIDs libata: Pioneer DVR-216D can't do SETXFER ahci: don't enable port irq before handler is registered libata: Implement ATA_FLAG_NO_DIPM and apply it to mcp65 libata: Kill unused ATA_DFLAG_{H|D}IPM flags ahci: EM supported message type sysfs attribute
-
git://git.infradead.org/ubifs-2.6Linus Torvalds authored
* 'for-linus' of git://git.infradead.org/ubifs-2.6: UBIFS: fix master node recovery UBIFS: fix false assertion warning in case of I/O failures UBIFS: fix false space checking failure
-
Jian Peng authored
At the end of section 10.1 of AHCI spec (rev 1.3), it states Software shall not set PxCMD.ST to 1 until it is determined that a functoinal device is present on the port as determined by PxTFD.STS.BSY=0, PxTFD.STS.DRQ=0 and PxSSTS.DET=3h Even though most AHCI host controller works without this check, specific controller will fail under this condition. Signed-off-by: Jian Peng <jipeng2005@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Igor Plyatov authored
The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was forgotten for "initial_timing" initialisation. This patch fixes such a problem. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Igor Plyatov authored
The AT91SAM9 microcontrollers with master clock higher then 105 MHz and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver does not detect ATA device. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Seth Heasley authored
The previously submitted patch was word-wrapped. This patch adds the AHCI-mode SATA DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Seth Heasley authored
The previously submitted patch was word-wrapped. This patch adds the IDE-mode SATA DeviceIDs for the Intel Panther Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Jeff Mahoney authored
Commit 4a5610a0 fixed an issue with the Pioneer DVR-212D not handling SETXFER correctly. An openSUSE user reported a similar issue with his DVR-216D that the NOSETXFER horkage worked around for him as well. This patch adds the DVR-216D (1.08) to the horkage list for NOSETXFER. The issue was reported at: https://bugzilla.novell.com/show_bug.cgi?id=679143Reported-by: Volodymyr Kyrychenko <vladimir.kirichenko@gmail.com> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Maxime Bizon authored
The ahci_pmp_attach() & ahci_pmp_detach() unmask port irqs, but they are also called during port initialization, before ahci host irq handler is registered. On ce4100 platform, this sometimes triggers "irq 4: nobody cared" message when loading driver. Fixed this by not touching the register if the port is in frozen state, and mark all uninitialized port as frozen. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Acked-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Tejun Heo authored
NVIDIA mcp65 familiy of controllers cause command timeouts when DIPM is used. Implement ATA_FLAG_NO_DIPM and apply it. This problem was reported by Stefan Bader in the following thread. http://thread.gmane.org/gmane.linux.ide/48841 stable: applicable to 2.6.37 and 38. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stefan Bader <stefan.bader@canonical.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Tejun Heo authored
ATA_DFLAG_{H|D}IPM flags are no longer used. Kill them. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Hannes Reinecke authored
This patch adds an sysfs attribute 'em_message_supported' to the ahci host device which prints out the supported enclosure management message types. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
-
Ben Hutchings authored
Commit 40aee729 ('kconfig: fix default value for choice input') fixed some cases where kconfig would select the wrong option from a choice with a single valid option and thus enter an infinite loop. However, this broke the test for user input of the form 'N?', because when kconfig selects the single valid option the input is zero-length and the test will read the byte before the input buffer. If this happens to contain '?' (as it will in a mips build on Debian unstable today) then kconfig again enters an infinite loop. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: stable@kernel.org [2.6.17+] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The dentry hashing rules have been really quite complicated for a long while, in odd ways. That made functions like __d_drop() very fragile and non-obvious. In particular, whether a dentry was hashed or not was indicated with an explicit DCACHE_UNHASHED bit. That's despite the fact that the hash abstraction that the dentries use actually have a 'is this entry hashed or not' model (which is a simple test of the 'pprev' pointer). The reason that was done is because we used the normal 'is this entry unhashed' model to mark whether the dentry had _ever_ been hashed in the dentry hash tables, and that logic goes back many years (commit b3423415: "dcache: avoid RCU for never-hashed dentries"). That, in turn, meant that __d_drop had totally different unhashing logic for the dentry hash table case and for the anonymous dcache case, because in order to use the "is this dentry hashed" logic as a flag for whether it had ever been on the RCU hash table, we had to unhash such a dentry differently so that we'd never think that it wasn't 'unhashed' and wouldn't be free'd correctly. That's just insane. It made the logic really hard to follow, when there were two different kinds of "unhashed" states, and one of them (the one that used "list_bl_unhashed()") really had nothing at all to do with being unhashed per se, but with a very subtle lifetime rule instead. So turn all of it around, and make it logical. Instead of having a DENTRY_UNHASHED bit in d_flags to indicate whether the dentry is on the hash chains or not, use the hash chain unhashed logic for that. Suddenly "d_unhashed()" just uses "list_bl_unhashed()", and everything makes sense. And for the lifetime rule, just use an explicit DENTRY_RCUACCEES bit. If we ever insert the dentry into the dentry hash table so that it is visible to RCU lookup, we mark it DENTRY_RCUACCESS to show that it now needs the RCU lifetime rules. Now suddently that test at dentry free time makes sense too. And because unhashing now is sane and doesn't depend on where the dentry got unhashed from (because the dentry hash chain details doesn't have some subtle side effects), we can re-unify the __d_drop() logic and use common code for the unhashing. Also fix one more open-coded hash chain bit_spin_lock() that I missed in the previous chain locking cleanup commit. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6Linus Torvalds authored
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM: Add missing syscore_suspend() and syscore_resume() calls PM: Fix error code paths executed after failing syscore_suspend()
-
Linus Torvalds authored
It's a useless abstraction for 'hlist_bl_head', and it doesn't actually help anything - quite the reverse. All the users end up having to know about the hlist_bl_head details anyway, using 'struct hlist_bl_node *' etc. So it just makes the code look confusing. And the cost of it is extra '&b->head' syntactic noise, but more importantly it spuriously makes the hash table dentry list look different from the per-superblock DCACHE_DISCONNECTED dentry list. As a result, the code ended up using ad-hoc locking for one case and special helper functions for what is really another totally identical case in the very same function. Make it all look and work the same. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 22 Apr, 2011 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds authored
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: tty/n_gsm: fix bug in CRC calculation for gsm1 mode serial/imx: read cts state only after acking cts change irq parport_pc.c: correctly release the requested region for the IT887x
-
Andi Kleen authored
Right now all RCU walks fall back to reference walk when CONFIG_SECURITY is enabled, even though just the standard capability module is active. This is because security_inode_exec_permission unconditionally fails RCU walks. Move this decision to the low level security module. This requires passing the RCU flags down the security hook. This way at least the capability module and a few easy cases in selinux/smack work with RCU walks with CONFIG_SECURITY=y Signed-off-by: Andi Kleen <ak@linux.intel.com> Acked-by: Eric Paris <eparis@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix unused warnings when !SND_HDA_NEEDS_RESUME ALSA: hda - Add a fix-up for Acer dmic with ALC271x codec ASoC: add a module alias to the FSI driver ALSA: emu10k1 - Fix "Music" controls to "Synth" controls in documents ARM: s3c2440: gta02; Register dfbmcs320 device for BT audio interface ASoC: codecs: JZ4740: Fix OOPS ASoC: Fix output PGA enabling in wm_hubs CODECs ASoC: sn95031: decorate function with __devexit_p() ASoC: SAMSUNG: Fix the inverted clocks handling for pcm driver ASoC: sst_platform: Fix lock acquring ASoC: fsi: driver safely remove for against irq ASoC: fsi: modify vague PM control on probe ASoC: fsi: take care in failing case of dai register MAINTAINERS: Update Samsung ASoC maintainer's id ASoC: WM8903: HP and Line out PGA/mixer DAPM fixes ASoC: Set left channel volume update bits for WM8994 ASoC: fix config error path ASoC: check channel mismatch between cpu_dai and codec_dai ASoC: Tegra: Suspend/resume support
-
Linus Torvalds authored
Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf, x86: Update/fix Intel Nehalem cache events perf, x86: P4 PMU - Don't forget to clear cpuc->active_mask on overflow x86, perf event: Turn off unstructured raw event access to offcore registers perf: Support Xeon E7's via the Westmere PMU driver
-
Linus Torvalds authored
Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: xtensa: Fixup irq conversion fallout and nmi_count
-
Peter Zijlstra authored
Change the Nehalem cache events to use retired memory instruction counters (similar to Westmere), this greatly improves the provided stats. Using: main () { int i; for (i = 0; i < 1000000000; i++) { asm("mov (%%rsp), %%rbx;" "mov %%rbx, (%%rsp);" : : : "rbx"); } } We find: $ perf stat --repeat 10 -e instructions:u -e l1-dcache-loads:u -e l1-dcache-stores:u ./loop_1b_loads+stores Performance counter stats for './loop_1b_loads+stores' (10 runs): 4,000,081,056 instructions:u # 0.000 IPC ( +- 0.000% ) 4,999,502,846 l1-dcache-loads:u ( +- 0.008% ) 1,000,034,832 l1-dcache-stores:u ( +- 0.000% ) 1.565184942 seconds time elapsed ( +- 0.005% ) The 5b is surprising - we'd expect 1b: $ perf stat --repeat 10 -e instructions:u -e r10b:u -e l1-dcache-stores:u ./loop_1b_loads+stores Performance counter stats for './loop_1b_loads+stores' (10 runs): 4,000,081,054 instructions:u # 0.000 IPC ( +- 0.000% ) 1,000,021,961 r10b:u ( +- 0.000% ) 1,000,030,951 l1-dcache-stores:u ( +- 0.000% ) 1.565055422 seconds time elapsed ( +- 0.003% ) Which this patch thus fixes. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Stephane Eranian <eranian@google.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Link: http://lkml.kernel.org/n/tip-q9rtru7b7840tws75xzboapv@git.kernel.orgSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Cyrill Gorcunov authored
It's not enough to simply disable event on overflow the cpuc->active_mask should be cleared as well otherwise counter may stall in "active" even in real being already disabled (which potentially may lead to the situation that user may not use this counter further). Don pointed out that: " I also noticed this patch fixed some unknown NMIs on a P4 when I stressed the box". Tested-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Link: http://lkml.kernel.org/r/1303398203-2918-3-git-send-email-dzickus@redhat.comSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Ingo Molnar authored
Andi Kleen pointed out that the Intel offcore support patches were merged without user-space tool support to the functionality: | | The offcore_msr perf kernel code was merged into 2.6.39-rc*, but the | user space bits were not. This made it impossible to set the extra mask | and actually do the OFFCORE profiling | Andi submitted a preliminary patch for user-space support, as an extension to perf's raw event syntax: | | Some raw events -- like the Intel OFFCORE events -- support additional | parameters. These can be appended after a ':'. | | For example on a multi socket Intel Nehalem: | | perf stat -e r1b7:20ff -a sleep 1 | | Profile the OFFCORE_RESPONSE.ANY_REQUEST with event mask REMOTE_DRAM_0 | that measures any access to DRAM on another socket. | But this kind of usability is absolutely unacceptable - users should not be expected to type in magic, CPU and model specific incantations to get access to useful hardware functionality. The proper solution is to expose useful offcore functionality via generalized events - that way users do not have to care which specific CPU model they are using, they can use the conceptual event and not some model specific quirky hexa number. We already have such generalization in place for CPU cache events, and it's all very extensible. "Offcore" events measure general DRAM access patters along various parameters. They are particularly useful in NUMA systems. We want to support them via generalized DRAM events: either as the fourth level of cache (after the last-level cache), or as a separate generalization category. That way user-space support would be very obvious, memory access profiling could be done via self-explanatory commands like: perf record -e dram ./myapp perf record -e dram-remote ./myapp ... to measure DRAM accesses or more expensive cross-node NUMA DRAM accesses. These generalized events would work on all CPUs and architectures that have comparable PMU features. ( Note, these are just examples: actual implementation could have more sophistication and more parameter - as long as they center around similarly simple usecases. ) Now we do not want to revert *all* of the current offcore bits, as they are still somewhat useful for generic last-level-cache events, implemented in this commit: e994d7d2: perf: Fix LLC-* events on Intel Nehalem/Westmere But we definitely do not yet want to expose the unstructured raw events to user-space, until better generalization and usability is implemented for these hardware event features. ( Note: after generalization has been implemented raw offcore events can be supported as well: there can always be an odd event that is marginally useful but not useful enough to generalize. DRAM profiling is definitely *not* such a category so generalization must be done first. ) Furthermore, PERF_TYPE_RAW access to these registers was not intended to go upstream without proper support - it was a side-effect of the above e994d7d2 commit, not mentioned in the changelog. As v2.6.39 is nearing release we go for the simplest approach: disable the PERF_TYPE_RAW offcore hack for now, before it escapes into a released kernel and becomes an ABI. Once proper structure is implemented for these hardware events and users are offered usable solutions we can revisit this issue. Reported-by: Andi Kleen <ak@linux.intel.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1302658203-4239-1-git-send-email-andi@firstfloor.orgSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
Andi Kleen authored
There's a new model number public, 47, for Xeon E7 (aka Westmere EX). Signed-off-by: Andi Kleen <ak@linux.intel.com> Cc: a.p.zijlstra@chello.nl Link: http://lkml.kernel.org/r/1303429715-10202-1-git-send-email-andi@firstfloor.orgSigned-off-by: Ingo Molnar <mingo@elte.hu>
-
- 21 Apr, 2011 3 commits
-
-
git://git.kernel.dk/linux-2.6-blockLinus Torvalds authored
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: ide: unexport DISK_EVENT_MEDIA_CHANGE for ide-gd and ide-cd block: don't propagate unlisted DISK_EVENTs to userland elevator: check for ELEVATOR_INSERT_SORT_MERGE in !elvpriv case too
-
Tejun Heo authored
check_events() implementations in both ide-gd and ide-cd are inadequate for in-kernel event polling. Both generate media change events continuously when certain conditions are met causing infinite event loop between the driver and userland event handler. As disk event now supports suppression of unlisted events, simply de-listing DISK_EVENT_MEDIA_CHANGE from disk->events resolves the problem. Internal handling around media revalidation will behave the same while userland will fall back to userland event polling after detecting the device doesn't support disk events. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jens Axboe <jaxboe@fusionio.com> Acked-by: "David S. Miller" <davem@davemloft.net> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-
Tejun Heo authored
DISK_EVENT_MEDIA_CHANGE is used for both userland visible event and internal event for revalidation of removeable devices. Some legacy drivers don't implement proper event detection and continuously generate events under certain circumstances. For example, ide-cd generates media changed continuously if there's no media in the drive, which can lead to infinite loop of events jumping back and forth between the driver and userland event handler. This patch updates disk event infrastructure such that it never propagates events not listed in disk->events to userland. Those events are processed the same for internal purposes but uevent generation is suppressed. This also ensures that userland only gets events which are advertised in the @events sysfs node lowering risk of confusion. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
-