With the recent change, transmissions that only needed
one descriptor were being missed. The result is that such
packets were tracked as outstanding transmissions but never
removed when its completion notification was received.

Fixes: ffc385b9 ("ibmvnic: Keep track of supplementary TX descriptors")
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2018-02-21

This series includes shared code updates for mlx5 core driver for both
netdev and rdma subsystems.

By Saeed,
First six patches of the series are meant to address a performance issue
and should provide a performance boost for multi core IRQ interrupt hungry
workloads.  The issue is fixed in the first patch, all other patches are
meant to refactor the code in light of this fix.

The problem it comes to fix, is a shared spinlock accessed across all HCA
IRQs which protects the CQ database.  To solve this we simply move the CQ
database and its spinlock to be per EQ (IRQ), thus per core.

By Yonatan,
Fragmented completion queue (CQ) for RDMA,
core driver implementation to create fragmented CQ buffers rather than
one large contiguous memory buffer, the implementation scheme already
exist and used by the netdev CQs, the patch shares that code with the
rdma CQ creation flow and makes use of the new API in mlx5_ib driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Matteo Croce says:

====================
Remove IPVlan module dependencies on IPv6 and L3 Master dev

The IPVlan module currently depends on IPv6 and L3 Master dev.
Refactor the code to allow building IPVlan module regardless of the value
of CONFIG_IPV6 as done in other drivers like VxLAN or GENEVE.
Also change the CONFIG_NET_L3_MASTER_DEV dependency into a select,
since compiling L3 Master device alone has little sense.

$ grep -wE 'CONFIG_(IPV6|IPVLAN)' .config
CONFIG_IPV6=y
CONFIG_IPVLAN=m
$ ll drivers/net/ipvlan/ipvlan.ko
48K drivers/net/ipvlan/ipvlan.ko

$ grep -wE 'CONFIG_(IPV6|IPVLAN)' .config
CONFIG_IPVLAN=m
$ ll drivers/net/ipvlan/ipvlan.ko
44K drivers/net/ipvlan/ipvlan.ko
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The L3 Master device is just a glue between the core networking code and
device drivers, so it should be selected automatically rather than
requiring to be enabled explicitly.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPVlan has an hard dependency on IPv6, refactor the ipvlan code to allow
compiling it with IPv6 disabled, move duplicate code into addr_equal()
and refactor series of if-else into a switch.
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow a rule that is being added/deleted/modified or
dumped to contain the originating protocol's id.

The protocol is handled just like a routes originating
protocol is.  This is especially useful because there
is starting to be a plethora of different user space
programs adding rules.

Allow the vrf device to specify that the kernel is the originator
of the rule created for this device.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a failure occurs during initialization of the tx sub crq
irqs, we should branch to the cleanup of the tx irqs. The current
code branches to the rx irq cleanup and attempts to cleanup the
rx irqs which have not been initialized.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TCPF_ macro depends on the definition of TCP_ macro.
So it is better to define them with TCP_ marco.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: remove non GSO code

Switching TCP to GSO mode, relying on core networking layers
to perform eventual adaptation for dumb devices was overdue.

1) Most TCP developments are done with TSO in mind.
2) Less high-resolution timers needs to be armed for TCP-pacing
3) GSO can benefit of xmit_more hint
4) Receiver GRO is more effective (as if TSO was used for real on sender)
   -> less ACK packets and overhead.
5) Write queues have less overhead (one skb holds about 64KB of payload)
6) SACK coalescing just works. (no payload in skb->head)
7) rtx rb-tree contains less packets, SACK is cheaper.
8) Removal of legacy code. Less maintenance hassles.

Note that I have left the sendpage/zerocopy paths, but they probably can
benefit from the same strategy.

Thanks to Oleksandr Natalenko for reporting a performance issue for BBR/fq_codel,
which was the main reason I worked on this patch series.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Since all skbs in write/rtx queues have CHECKSUM_PARTIAL,
we can remove dead code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We no longer have skbs with skb->ip_summed == CHECKSUM_NONE
in TCP write queues.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We no longer have skbs with skb->ip_summed == CHECKSUM_NONE
in TCP write queues.

We can remove dead code in tcp_sendmsg().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since TCP relies on GSO, we do not need this helper anymore.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After previous commit, sk_can_gso() is always true.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Oleksandr Natalenko reported performance issues with BBR without FQ
packet scheduler that were root caused to lack of SG and GSO/TSO on
his configuration.

In this mode, TCP internal pacing has to setup a high resolution timer
for each MSS sent.

We could implement in TCP a strategy similar to the one adopted
in commit fefa569a ("net_sched: sch_fq: account for schedule/timers drifts")
or decide to finally switch TCP stack to a GSO only mode.

This has many benefits :

1) Most TCP developments are done with TSO in mind.
2) Less high-resolution timers needs to be armed for TCP-pacing
3) GSO can benefit of xmit_more hint
4) Receiver GRO is more effective (as if TSO was used for real on sender)
   -> Lower ACK traffic
5) Write queues have less overhead (one skb holds about 64KB of payload)
6) SACK coalescing just works.
7) rtx rb-tree contains less packets, SACK is cheaper.

This patch implements the minimum patch, but we can remove some legacy
code as follow ups.

Tested:

On 40Gbit link, one netperf -t TCP_STREAM

BBR+fq:
sg on:  26 Gbits/sec
sg off: 15.7 Gbits/sec   (was 2.3 Gbit before patch)

BBR+pfifo_fast:
sg on:  24.2 Gbits/sec
sg off: 14.9 Gbits/sec  (was 0.66 Gbit before patch !!! )

BBR+fq_codel:
sg on:  24.4 Gbits/sec
sg off: 15 Gbits/sec  (was 0.66 Gbit before patch !!! )
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nathan Fontenot says:

====================
ibmvnic: Make driver resources dynamic

The ibmvnic driver needs to be able to handle the number of tx/rx
sub-crqs changing during a reset of the driver. To do this several
changes need to be made. First the num_active_[tx|rx]_pools
counters need to be re-named to num_active_[tc|rx]_scrqs, and
updated after resource initialization.

With this change we can now release and init the sub crqs and napi
(for rx sub crqs) when the number of sub crqs change.

Lastly, the stats buffer allocation is updated to always allocate
the maximum number of sub-crqs count of stats buffers.

-Nathan
---

Updates for V3:
Patch 3/5 - Make do_h_free parameter a bool

Updates for V2:
Patch 3/5 - Use correct queue count when driver is in probed state
for releasing sub crqs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

To avoid losing any stats when the number of sub-crqs change, allocate
the max number of stats buffers so a stats buffer exists all possible
sub-crqs.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to handle the number of rx sub crqs changing during a driver
reset, the ibmvnic driver also needs to update the number of napi.
To do this the code to init and free napi's is moved to their own
routines so they can be called during the reset process.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the driver resets it is possible that the number of tx/rx
sub-crqs can change. This patch handles this so that the driver does
not try to access non-existent sub-crqs.

The count for releasing sub crqs depends on the adapter state. The
active queue count is not set in probe, so if we are relasing in probe
state we use the request queue count.

Additionally, a parameter is added to release_sub_crqs() so that
we know if the h_call to free the sub-crq needs to be made. In
the reset path we have to do a reset of the main crq, which is
a free followed by a register of the main crq. The free of main
crq results in all of the sub crq's being free'ed. When updating
sub-crq count in the reset path we do not want to h_free the
sub-crqs, they are already free'ed.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Inpreparation for using the active scrq count to track more active
resources, move the setting of the active count to after initialization
occurs in initial driver init and during driver reset.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rename the tx/rx active pool variables to be tx/rx active scrq
counts. The tx/rx pools are per sub-crq so this is a more appropriate
name. This also is a preparatory step for using thiese variables
for handling updates to sub-crqs and napi based on the active
count.
Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.

Addresses-Coverity-ID: 1465362 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Finn Thain says:

====================
Fixes, cleanup and modernization for 8390 ethernet drivers

Changes since v4 of combined patch series:
- Removed redundant and non-portable MACH_IS_MAC tests.
- Added acked-by tags from Geert Uytterhoeven.
- Omitted patches unrelated to 8390 drivers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Use dev_foo() to log the slot number instead of the unexpanded "eth%d"
format string.
Disambiguate the two identical "Card type %s is unsupported" messages.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

This resolves an old bug that constrained this driver to no more than
one card.
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lib8390 module parameter 'msg_enable' doesn't do anything useful:
it causes an ancient version string to be logged.

Remove redundant code that logs the same string.

In ne.c and wd.c, the value of ei_local->msg_enable is used before
being assigned. Use ne_msg_enable and wd_msg_enable, respectively.

Most of the other 8390 drivers never assign ei_local->msg_enable.
Use the 'msg_enable' module parameter from lib8390 as the default
value.

Eliminate the pointless static and local variables.

Clean up an indentation mistake.

All of these issues originated from the same patch.

Cc: Russell King <linux@armlinux.org.uk>
Fixes: c45f812f ("8390 : Replace ei_debug with msg_enable/NETIF_MSG_* feature")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hydra, zorro8390 and mcf8390 drivers all #include "lib8390.c" and
have no need for 8390.o. modinfo confirms no dependency on 8390.ko.
Drop the redundant dependency from the Makefile. objdump confirms
that this patch has no effect on the module binaries.

The superfluous additions of 8390.o were introduced in
commit 644570b8 ("8390: Move the 8390 related drivers").

Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

rtl8169_init_phy() resets the PHY anyway after applying the chip-specific
PHY configuration. So we don't need to soft-reset the PHY as part of the
chip-specific configuration.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The commit a new tc ematch for using netfilter xtable matches.

This allows early classification as well as mirroning/redirecting traffic
based on logic implemented in netfilter extensions.

Current supported use case is classification based on the incoming IPSec
state used during decpsulation using the 'policy' iptables extension
(xt_policy).

The module dynamically fetches the netfilter match module and calls
it using a fake xt_action_param structure based on validated userspace
provided parameters.

As the xt_policy match does not access skb->data, no skb modifications
are needed on match.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit bde135a6 "r8169: only enable PCI wakeups when WOL is active"
removed the only user of flag RTL_FEATURE_WOL. So let's remove some
now dead code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Niklas Cassel says:

====================
stmmac multi-queue fixes and cleanups
====================
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Honor error code from stmmac_dt_phy() instead of always
returning -ENODEV.

No functional change intended.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The device tree binding for stmmac says:

- Multiple TX Queues parameters: below the list of all the parameters to
                                 configure the multiple TX queues:
        - snps,tx-queues-to-use: number of TX queues to be used in the driver
	[...]
        - For each TX queue
		[...]

However, if one specifies snps,tx-queues-to-use = 2,
but omits the queue subnodes, or defines just one queue subnode,
since the driver appears to initialize queues with sane default
values, we will get tx queue timeouts.

This is because the initialization code only initializes
as many queues as it finds subnodes. Potentially leaving
some queues uninitialized.

To avoid hard to debug issues, return an error if the number
of subnodes differ from snps,tx-queues-to-use/snps,rx-queues-to-use.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

stmmac_mac_config_rx_queues_routing() incorrectly calls rx_queue_prio()
instead of rx_queue_routing().

This looks like a copy paste issue, since
stmmac_mac_config_rx_queues_prio() already calls rx_queue_prio(),
and both stmmac_mac_config_rx_queues_routing() and
stmmac_mac_config_rx_queues_prio() are very similar in structure.

Fixes: abe80fdc ("net: stmmac: RX queue routing configuration")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Looking at dwmac4_tx_queue_routing(), it is obvious that it
sets up rx queue routing.

Rename dwmac4_tx_queue_routing() to dwmac4_rx_queue_routing()
to better match reality.

Fixes: abe80fdc ("net: stmmac: RX queue routing configuration")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current code assumes that a tx_skbuff entry has been cleared
by stmmac_tx_clean() before stmmac_xmit()/stmmac_tso_xmit()
assigns a new skb to that entry. However, since we never check
the current value before overwriting it, it is theoretically
possible that a non-NULL value is overwritten.

Add WARN_ONs to verify that each entry in tx_skbuff is NULL
before it is assigned a new value.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tx_skbuff is initialized to NULL in init_dma_tx_desc_rings(), which is
called from ndo_open().

stmmac_tx_clean() frees any non-NULL skb, and sets the tx_skbuff
entry to NULL. Hence, there is no need to set skbuff entries to NULL
in stmmac_xmit()/stmmac_tso_xmit(), and doing so falsely gives the
reader the impression that it is needed.
Do not clear tx_skbuff entries in stmmac_xmit()/stmmac_tso_xmit().
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The DMA engine in dwmac4 can segment a large TSO packet to several
smaller packets of (max) size Maximum Segment Size (MSS).

The DMA engine fetches and saves the MSS via a context descriptor.

This context decriptor has to be provided to each tx DMA channel.
To ensure that this is done, move struct member mss from stmmac_priv
to stmmac_tx_queue.

stmmac_reset_queues_param() now also resets mss, together with other
queue parameters, so reset of mss value can be removed from
stmmac_resume().

init_dma_tx_desc_rings() now also resets mss, together with other
queue parameters, so reset of mss value can be removed from
stmmac_open().

This fixes tx queue timeouts for dwmac4, with DT property
snps,tx-queues-to-use > 1, when running iperf3 with multiple threads.

Fixes: ce736788 ("net: stmmac: adding multiple buffers for TX")
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use %*ph format to print small buffer as hex string.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Antonio Cardace <anto.cardace@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: Expose KVD linear parts as resources

Arkadi says:

Expose the KVD linear partitions via the devlink resource interface. This
will give the user the ability to control the linear memory division.

---
v1->v2:
- patch1:
 - fixed u64 division error reported by kbuildbot
====================
Signed-off-by: David S. Miller <davem@davemloft.net>