- 02 Mar, 2010 40 commits
-
-
Felipe Balbi authored
we were printing the info about musb probe too early where it was still possible for things to go wrong. Move the down right before the return 0 statement. While at that also convert pr_info to dev_info. Signed-off-by:
Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Felipe Balbi authored
when probe() fails, we should iounmap() the mapped address. Signed-off-by:
-
Felipe Balbi authored
Trivial patch, no functional changes. Signed-off-by:
-
Felipe Balbi authored
after 2.6.34, those fields will be removed from struct musb_hdrc_platform_data, it's expected that other architectures are fixed by then. Signed-off-by:
-
Felipe Balbi authored
... and even added a flag to struct musb, so let's use that. Signed-off-by:
-
Felipe Balbi authored
we have those addresses already ioremaped, so let's use our __raw_readl/writel wrappers. Signed-off-by:
-
Ajay Kumar Gupta authored
Adding support for MUSB register save and restore during system suspend and resume. Changes: - Added musb_save/restore_context() functions - Added platform specific musb_platform_save/restore_context() to handle platform specific jobs. - Maintaining BlackFin compatibility by adding read/write functions for registers which are not available in BlackFin Tested system suspend and resume on OMAP3EVM board. Signed-off-by:Anand Gadiyar <gadiyar@ti.com> Signed-off-by:
Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by:
-
Christoph Egger authored
The configuration Option USB_HCD_DMA is not reachable in KConfig so this piece of Code is effectively dead and useless. Remove it to avoid confusion. Signed-off-by:
Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by:
-
Chris Frey authored
Uses the new snoop function from commit 4c6e8971, but includes the buffer data where appropriate, as before. Signed-off-by:
Chris Frey <cdfrey@foursquare.net> Signed-off-by:
-
Mark Brown authored
Keeps sparse happy if nothing else. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Thadeu Lima de Souza Cascardo authored
Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by:
-
Andreas Mohr authored
- correct spelling - correct non-tabbed .tiocmget/.tiocmset entries Signed-off-by:
Andreas Mohr <andi@lisas.de> Signed-off-by:
-
Andreas Mohr authored
- correct spelling/whitespace in ftdi_sio.h and ftdi_sio_ids.h Signed-off-by:
-
Julia Lawall authored
The variables priv and portdata are initialized twice to the same (side effect-free) expressions. Drop one initialization in each case. A simplified version of the semantic match that finds this problem is: (http://coccinelle.lip6.fr/) // <smpl> @forall@ idexpression *x; identifier f!=ERR_PTR; @@ x = f(...) ... when != x ( x = f(...,<+...x...+>,...) | * x = f(...) ) // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Marcel Holtmann authored
The problem with Ethernet based networking devices is to clearly identify what's their usage. Special interfaces like bridges, WiFi, Bluetooth, WiMAX or WWAN are already using DEVTYPE identification. This patch marks the Ethernet functions of gadgets from the device type "gadget". Automatic setup of these interfaces can now happen from userspace without the need of hardcoding the network interface name. Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Greg Kroah-Hartman authored
The Barry project's userspace program, bcharge, can better handle this device and functionality, and it also works with the latest phones, which this driver does not support. So remove it, as the userspace code should be used instead. Cc: Chris Frey <cdfrey@foursquare.net> Signed-off-by: -
Oliver Neukum authored
Total removal from the ioctl code path except for the outcall to external modules. Locking is ensured by the normal locks of usbfs. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Oliver Neukum authored
BKL was not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL was not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL was not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL was not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL was not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL was not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL was not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
This driver had used BKL to guard against disconnect but was incorrectly converted leaving an SMP race. BKL was added to disconnect() to fix this race BKL was removed from ioctl() as the mutex is sufficient on its own. Signed-off-by:
-
Oliver Neukum authored
BKL not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL not needed at all. Removed without replacement. Signed-off-by:
-
Oliver Neukum authored
BKL was not needed at all. Removed without replacement. Signed-off-by:
Pete Zaitcev <zaitcev@redhat.com> Signed-off-by:
-
Ben Hutchings authored
Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Oliver Neukum authored
This pushes BKL down in ioctl handling and drops it for some important ioctls Signed-off-by:
-
Oliver Neukum authored
Straightforward push into the drivers to allow auditing individual drivers separately Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Oliver Neukum authored
Replace it by mutex_lock(&file->f_dentry->d_inode->i_mutex); following the example of the generic method Signed-off-by:
-
Oliver Neukum authored
Locking had long been changed making BKL redundant. Simply remove it. Signed-off-by:
-
Oliver Neukum authored
Replace BKL with usbfs_mutex to protect a global counter and a per file data structure Signed-off-by:
-
Thiago Farina authored
Signed-off-by:
Thiago Farina <tfransosi@gmail.com> Signed-off-by:
-
Gernot Hillier authored
The 4G XS Stick W14 seems to not understand RTS/DTR setting in option_send_setup causing long timeouts on any open() which disturbs a lot of well-known userspace applications like minicom or ModemManager. Therefore, we enable OPTION_BLACKLIST_SENDSETUP blacklisting for it. Signed-off-by:
Gernot Hillier <gernot@hillier.de> Signed-off-by:
-
Gernot Hillier authored
As suggested by Matthias Urlichs, this patch adds a somehow generic mechanism for special handling of devices which don't support all bits expected by this driver. The blacklisting code is heavily stolen from sierra.c, but extended to support different special cases. For now, one case is implemented (OPTION_BLACKLIST_SENDSETUP), targeted at the 4G W14 device: devices which don't understand the setting of RTS/DTR in option_send_setup() causing a USB timeout of 5 s in any userspace open() which leads to errors in most userspace applications. In addition, I prepared another case for devices with interfaces which shall not be accessed by this driver (targeted at the D-Link DWM 652). However, OPTION_BLACKLIST_RESERVED_IF is not fully implemented yet as I have no device to test this. Anyone volunteering to help here? If not, I'll contact the guys who added D-Link DWM 652 support soon. Signed-off-by:
-
Gernot Hillier authored
Carsten Juttner thankfully investigated a bit and found out some details about the chipset used in the 4G W14 device I recently added to option.c. I think this information is useful for reference, so I'd be happy if you could include those bits. Signed-off-by:
-
