If gcc (e.g. 4.1.2) decides not to inline total_extension_size(), the
build will fail with:

    net/built-in.o: In function `nf_conntrack_init_start':
    (.text+0x9baf6): undefined reference to `__compiletime_assert_1893'

or

    ERROR: "__compiletime_assert_1893" [net/netfilter/nf_conntrack.ko] undefined!

Fix this by forcing inlining of total_extension_size().

Fixes: b3a5db10 ("netfilter: conntrack: use u8 for extension sizes again")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

On 32-bit:

    lib/test_bpf.c:4772: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4772: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4773: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4773: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4787: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4787: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4801: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4801: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4802: warning: integer constant is too large for ‘unsigned long’ type
    lib/test_bpf.c:4802: warning: integer constant is too large for ‘unsigned long’ type

On 32-bit systems, "long" is only 32-bit.
Replace the "UL" suffix by "ULL" to fix this.

Fixes: 85f68fe8 ("bpf, arm64: implement jiting of BPF_XADD")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds support for Telit ME910 PID 0x1100.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now tg3 NIC's stats will be cleared after ifdown/ifup. bond_get_stats traverse
its salves to get statistics,cumulative the increment.If a tg3 NIC is added to
bonding as a slave,ifdown/ifup will cause bonding's stats become tremendous value
(ex.1638.3 PiB) because of negative increment.

Fixes: 92feeabf ("tg3: Save stats across chip resets")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

-D__x86_64__ workaround was used to make /usr/include/features.h
to follow expected path through the system include headers.
This is not portable.
Instead define dummy stubs.h which is used by 'clang -target bpf'

Fixes: 6882804c ("selftests/bpf: add a test for overlapping packet range checks")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

With clang/llvm 4.0+, the test case is able to generate
the following pattern:
....
440: (b7) r1 = 15
441: (05) goto pc+73
515: (79) r6 = *(u64 *)(r10 -152)
516: (bf) r7 = r10
517: (07) r7 += -112
518: (bf) r2 = r7
519: (0f) r2 += r1
520: (71) r1 = *(u8 *)(r8 +0)
521: (73) *(u8 *)(r2 +45) = r1
....

commit 332270fd ("bpf: enhance verifier to understand stack
pointer arithmetic") improved verifier to handle such a pattern.
This patch adds a C test case to actually generate such a pattern.
A dummy tracepoint interface is used to load the program
into the kernel.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Small follow-up to d74a32ac ("xdp: use netlink extended ACK reporting")
in order to let drivers all use the same NL_SET_ERR_MSG_MOD() helper macro
for reporting. This also ensures that we consistently add the driver's
prefix for dumping the report in user space to indicate that the error
message is driver specific and not coming from core code. Furthermore,
NL_SET_ERR_MSG_MOD() now reuses NL_SET_ERR_MSG() and thus makes all macros
check the pointer as suggested.

References: https://www.spinics.net/lists/netdev/msg433267.htmlSigned-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrey reported a warning triggered by the rcu code:

------------[ cut here ]------------
WARNING: CPU: 1 PID: 5911 at lib/debugobjects.c:289
debug_print_object+0x175/0x210
ODEBUG: activate active (active state 1) object type: rcu_head hint:
        (null)
Modules linked in:
CPU: 1 PID: 5911 Comm: a.out Not tainted 4.11.0-rc8+ #271
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:16
 dump_stack+0x192/0x22d lib/dump_stack.c:52
 __warn+0x19f/0x1e0 kernel/panic.c:549
 warn_slowpath_fmt+0xe0/0x120 kernel/panic.c:564
 debug_print_object+0x175/0x210 lib/debugobjects.c:286
 debug_object_activate+0x574/0x7e0 lib/debugobjects.c:442
 debug_rcu_head_queue kernel/rcu/rcu.h:75
 __call_rcu.constprop.76+0xff/0x9c0 kernel/rcu/tree.c:3229
 call_rcu_sched+0x12/0x20 kernel/rcu/tree.c:3288
 rt6_rcu_free net/ipv6/ip6_fib.c:158
 rt6_release+0x1ea/0x290 net/ipv6/ip6_fib.c:188
 fib6_del_route net/ipv6/ip6_fib.c:1461
 fib6_del+0xa42/0xdc0 net/ipv6/ip6_fib.c:1500
 __ip6_del_rt+0x100/0x160 net/ipv6/route.c:2174
 ip6_del_rt+0x140/0x1b0 net/ipv6/route.c:2187
 __ipv6_ifa_notify+0x269/0x780 net/ipv6/addrconf.c:5520
 addrconf_ifdown+0xe60/0x1a20 net/ipv6/addrconf.c:3672
...

Andrey's reproducer program runs in a very tight loop, calling
'unshare -n' and then spawning 2 sets of 14 threads running random ioctl
calls. The relevant networking sequence:

1. New network namespace created via unshare -n
- ip6tnl0 device is created in down state

2. address added to ip6tnl0
- equivalent to ip -6 addr add dev ip6tnl0 fd00::bb/1
- DAD is started on the address and when it completes the host
  route is inserted into the FIB

3. ip6tnl0 is brought up
- the new fixup_permanent_addr function restarts DAD on the address

4. exit namespace
- teardown / cleanup sequence starts
- once in a blue moon, lo teardown appears to happen BEFORE teardown
  of ip6tunl0
  + down on 'lo' removes the host route from the FIB since the dst->dev
    for the route is loobback
  + host route added to rcu callback list
    * rcu callback has not run yet, so rt is NOT on the gc list so it has
      NOT been marked obsolete

5. in parallel to 4. worker_thread runs addrconf_dad_completed
- DAD on the address on ip6tnl0 completes
- calls ipv6_ifa_notify which inserts the host route

All of that happens very quickly. The result is that a host route that
has been deleted from the IPv6 FIB and added to the RCU list is re-inserted
into the FIB.

The exit namespace eventually gets to cleaning up ip6tnl0 which removes the
host route from the FIB again, calls the rcu function for cleanup -- and
triggers the double rcu trace.

The root cause is duplicate DAD on the address -- steps 2 and 3. Arguably,
DAD should not be started in step 2. The interface is in the down state,
so it can not really send out requests for the address which makes starting
DAD pointless.

Since the second DAD was introduced by a recent change, seems appropriate
to use it for the Fixes tag and have the fixup function only start DAD for
addresses in the PREDAD state which occurs in addrconf_ifdown if the
address is retained.

Big thanks to Andrey for isolating a reliable reproducer for this problem.
Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adding support for Microchip LAN9250 Ethernet controller.
Signed-off-by: David Cai <david.cai@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jesper Dangaard Brouer says:

====================
Improve bpf ELF-loader under samples/bpf

This series improves and fixes bpf ELF loader and programs under
samples/bpf.  The bpf_load.c created some hard to debug issues when
the struct (bpf_map_def) used in the ELF maps section format changed
in commit fb30d4b7 ("bpf: Add tests for map-in-map").

This was hotfixed in commit 409526bea3c3 ("samples/bpf: bpf_load.c
detect and abort if ELF maps section size is wrong") by detecting the
issue and aborting the program.

In most situations the bpf-loader should be able to handle these kind
of changes to the struct size.  This patch series aim to do proper
backward and forward compabilility handling when loading ELF files.

This series also adjust the callback that was introduced in commit
9fd63d05 ("bpf: Allow bpf sample programs (*_user.c) to change
bpf_map_def") to use the new bpf_map_data structure, before more users
start to use this callback.

Hoping these changes can make the merge window, as above mentioned
commits have not been merged yet, and it would be good to avoid users
hitting these issues.
====================
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Giving *_user.c side tools access to map_data[] provides easier
access to information on the maps being loaded.  Still provide
the guarantee that the order maps are being defined in inside the
_kern.c file corresponds with the order in the array.  Now user
tools are not blind, but can inspect and verify the maps that got
loaded from the ELF binary.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do this change before others start to use this callback.
Change map_perf_test_user.c which seems to be the only user.

This patch extends capabilities of commit 9fd63d05 ("bpf:
Allow bpf sample programs (*_user.c) to change bpf_map_def").

Give fixup callback access to struct bpf_map_data, instead of
only stuct bpf_map_def.  This add flexibility to allow userspace
to reassign the map file descriptor.  This is very useful when
wanting to share maps between several bpf programs.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch does proper parsing of the ELF "maps" section, in-order to
be both backwards and forwards compatible with changes to the map
definition struct bpf_map_def, which gets compiled into the ELF file.

The assumption is that new features with value zero, means that they
are not in-use.  For backward compatibility where loading an ELF file
with a smaller struct bpf_map_def, only copy objects ELF size, leaving
rest of loaders struct zero.  For forward compatibility where ELF file
have a larger struct bpf_map_def, only copy loaders own struct size
and verify that rest of the larger struct is zero, assuming this means
the newer feature was not activated, thus it should be safe for this
older loader to load this newer ELF file.

Fixes: fb30d4b7 ("bpf: Add tests for map-in-map")
Fixes: 409526bea3c3 ("samples/bpf: bpf_load.c detect and abort if ELF maps section size is wrong")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Needed to adjust max locked memory RLIMIT_MEMLOCK for testing these bpf samples
as these are using more and larger maps than can fit in distro default 64Kbytes limit.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull trivial tree updates from Jiri Kosina.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial:
  tty: fix comment for __tty_alloc_driver()
  init/main: properly align the multi-line comment
  init/main: Fix double "the" in comment
  Fix dead URLs to ftp.kernel.org
  drivers: Clean up duplicated email address
  treewide: Fix typo in xml/driver-api/basics.xml
  tools/testing/selftests/powerpc: remove redundant CFLAGS in Makefile: "-Wall -O2 -Wall" -> "-O2 -Wall"
  selftests/timers: Spelling s/privledges/privileges/
  HID: picoLCD: Spelling s/REPORT_WRTIE_MEMORY/REPORT_WRITE_MEMORY/
  net: phy: dp83848: Fix Typo
  UBI: Fix typos
  Documentation: ftrace.txt: Correct nice value of 120 priority
  net: fec: Fix typo in error msg and comment
  treewide: Fix typos in printk

Pull livepatch updates from Jiri Kosina:

 - a per-task consistency model is being added for architectures that
   support reliable stack dumping (extending this, currently rather
   trivial set, is currently in the works).

   This extends the nature of the types of patches that can be applied
   by live patching infrastructure. The code stems from the design
   proposal made [1] back in November 2014. It's a hybrid of SUSE's
   kGraft and RH's kpatch, combining advantages of both: it uses
   kGraft's per-task consistency and syscall barrier switching combined
   with kpatch's stack trace switching. There are also a number of
   fallback options which make it quite flexible.

   Most of the heavy lifting done by Josh Poimboeuf with help from
   Miroslav Benes and Petr Mladek

   [1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz

 - module load time patch optimization from Zhou Chengming

 - a few assorted small fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: add missing printk newlines
  livepatch: Cancel transition a safe way for immediate patches
  livepatch: Reduce the time of finding module symbols
  livepatch: make klp_mutex proper part of API
  livepatch: allow removal of a disabled patch
  livepatch: add /proc/<pid>/patch_state
  livepatch: change to a per-task consistency model
  livepatch: store function sizes
  livepatch: use kstrtobool() in enabled_store()
  livepatch: move patching functions into patch.c
  livepatch: remove unnecessary object loaded check
  livepatch: separate enabled and patched states
  livepatch/s390: add TIF_PATCH_PENDING thread flag
  livepatch/s390: reorganize TIF thread flag bits
  livepatch/powerpc: add TIF_PATCH_PENDING thread flag
  livepatch/x86: add TIF_PATCH_PENDING thread flag
  livepatch: create temporary klp_update_patch_state() stub
  x86/entry: define _TIF_ALLWORK_MASK flags explicitly
  stacktrace/x86: add function for detecting reliable stack traces

Pull HID subsystem updates from Jiri Kosina:

 - The need for HID_QUIRK_NO_INIT_REPORTS per-device quirk has been
   growing dramatically during past years, so the time has come to
   switch over the default, and perform the pro-active reading only in
   cases where it's really needed (multitouch, wacom).

   The only place where this behavior is (in some form) preserved is
   hiddev so that we don't introduce userspace-visible change of
   behavior.

   From Benjamin Tissoires

 - HID++ support for power_supply / baterry reporting.

   From Benjamin Tissoires and Bastien Nocera

 - Vast improvements / rework of DS3 and DS4 in Sony driver.

   From Roderick Colenbrander

 - Improvment (in terms of getting closer to the Microsoft's
   interpretation of slightly ambiguous specification) of logical range
   interpretation in case null-state is set in the rdesc.

   From Valtteri Heikkilä and Tomasz Kramkowski

 - A lot of newly supported device IDs and small assorted fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (71 commits)
  HID: usbhid: Add HID_QUIRK_NOGET for Aten CS-1758 KVM switch
  HID: asus: support backlight on USB keyboards
  HID: wacom: Move wacom_remote_irq and wacom_remote_status_irq
  HID: wacom: generic: sync pad events only for actual packets
  HID: sony: remove redundant check for -ve err
  HID: sony: Make sure to unregister sensors on failure
  HID: sony: Make DS4 bt poll interval adjustable
  HID: sony: Set proper bit flags on DS4 output report
  HID: sony: DS4 use brighter LED colors
  HID: sony: Improve navigation controller axis/button mapping
  HID: sony: Use DS3 MAC address as unique identifier on USB
  HID: logitech-hidpp: add a sysfs file to tell we support power_supply
  HID: logitech-hidpp: enable HID++ 1.0 battery reporting
  HID: logitech-hidpp: add support for battery status for the K750
  HID: logitech-hidpp: battery: provide CAPACITY_LEVEL
  HID: logitech-hidpp: rename battery level into capacity
  HID: logitech-hidpp: battery: provide ONLINE property
  HID: logitech-hidpp: notify battery on connect
  HID: logitech-hidpp: return an error if the queried feature is not present
  HID: logitech-hidpp: create the battery for all types of HID++ devices
  ...

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.12 cycle.

  The extra week before the merge window actually resulted in some of
  the type of fixes that usually arrive after the merge window already
  starting to trickle in from eager developers using -next, I'm
  impressed.

  I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal
  with the onset of Samsung patches. It works great.

  Apart from that it is a boring round, just incremental updates and
  fixes all over the place, no serious core changes or anything exciting
  like that. The most pleasing to see is Julia Cartwrights work to audit
  the irqchip-providing drivers for realtime locking compliance. It's
  one of those "I should really get around to looking into that" things
  that have been on my TODO list since forever.

  Summary:

  Core changes:

   - add bi-directional and output-enable pin configurations to the
     generic bindings and generic pin controlling core.

  New drivers or subdrivers:

   - Armada 37xx SoC pin controller and GPIO support.

   - Axis ARTPEC-6 SoC pin controller support.

   - AllWinner A64 R_PIO controller support, and opening up the
     AllWinner sunxi driver for ARM64 use.

   - Rockchip RK3328 support.

   - Renesas R-Car H3 ES2.0 support.

   - STM32F469 support in the STM32 driver.

   - Aspeed G4 and G5 pin controller support.

  Improvements:

   - a whole slew of realtime improvements to drivers implementing
     irqchips: BCM, AMD, SiRF, sunxi, rockchip.

   - switch meson driver to get the GPIO ranges from the device tree.

   - input schmitt trigger support on the Rockchip driver.

   - enable the sunxi (AllWinner) driver to also be used on ARM64
     silicon.

   - name the Qualcomm QDF2xxx GPIO lines.

   - support GMMR GPIO regions on the Intel Cherryview. This fixes a
     serialization problem on these platforms.

   - pad retention support for the Samsung Exynos 5433.

   - handle suspend-to-ram in the AT91-pio4 driver.

   - pin configuration support in the Aspeed driver.

  Cleanups:

   - the final name of Rockchip RK1108 was RV1108 so rename the driver
     and variables to stay consistent"

* tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl: mediatek: Add missing pinctrl bindings for mt7623
  pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()
  pinctrl: artpec6: Remove .owner field for driver
  pinctrl: tegra: xusb: Silence sparse warnings
  ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller"
  pinctrl: make artpec6 explicitly non-modular
  pinctrl: aspeed: g5: Add pinconf support
  pinctrl: aspeed: g4: Add pinconf support
  pinctrl: aspeed: Add core pinconf support
  pinctrl: aspeed: Document pinconf in devicetree bindings
  pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl
  pinctrl: stm32: Add STM32F469 MCU support
  Documentation: dt: Remove ngpios from stm32-pinctrl binding
  pinctrl: stm32: replace device_initcall() with arch_initcall()
  pinctrl: stm32: add possibility to use gpio-ranges to declare bank range
  pinctrl: armada-37xx: Add gpio support
  pinctrl: armada-37xx: Add pin controller support for Armada 37xx
  pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers
  pinctrl: core: Make pinctrl_init_controller() static
  pinctrl: generic: Add bi-directional and output-enable
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Continue to re-factor code to prepare for eMMC CMDQ and blkmq support
   - Introduce queue semantics to prepare for eMMC CMDQ and blkmq support
   - Add helper functions to manage temporary enable/disable of eMMC CMDQ
   - Improve wait-busy detection for SDIO

  MMC host:
   - cavium: Add driver to support Cavium controllers
   - cavium: Extend Cavium driver to support Octeon and ThunderX SOCs
   - bcm2835: Add new driver for Broadcom BCM2835 controller
   - sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller
   - sdhci-tegra: Add support for the Tegra186 variant
   - sdhci-of-esdhc: Support for UHS-I SD cards
   - sdhci-of-esdhc: Support for eMMC HS200 cards
   - sdhci-cadence: Add eMMC HS400 enhanced strobe support
   - sdhci-esdhc-imx: Reset tuning circuit when needed
   - sdhci-pci: Modernize and clean-up some PM related code
   - sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices
   - sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers
   - sdhci: Re-factoring and modernizations
   - sdhci: Optimize delay loops
   - sdhci: Improve register dump print format
   - sdhci: Add support for the Command Queue Engine
   - meson-gx: Various improvements and clean-ups
   - meson-gx: Add support for CMD23
   - meson-gx: Basic tuning support to avoid CRC errors
   - s3cmci: Enable probing via DT
   - mediatek: Improve tuning support for eMMC HS200 and HS400 mode
   - tmio: Improve DMA support
   - tmio: Use correct response for CMD12
   - dw_mmc: Minor improvements and clean-ups"

* tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits)
  mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a
  mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay
  mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY
  mmc: sdhci-xenon: Fix the work flow in xenon_remove().
  MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC
  mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data()
  mmc: cavium: Use module_pci_driver to simplify the code
  mmc: cavium: Add MMC support for Octeon SOCs.
  mmc: cavium: Fix detection of block or byte addressing.
  mmc: core: Export API to allow hosts to get the card address
  mmc: sdio: Fix sdio wait busy implement limitation
  mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card
  clk: apn806: fix spelling mistake: "mising" -> "missing"
  mmc: sdhci-of-esdhc: add delay between tuning cycles
  mmc: sdhci: Control the delay between tuning commands
  mmc: sdhci-of-esdhc: add tuning support
  mmc: sdhci-of-esdhc: add support for signal voltage switch
  mmc: sdhci-of-esdhc: add peripheral clock support
  mmc: sdhci-pci: Allow for 3 bytes from Intel DSM
  mmc: cavium: Fix a shift wrapping bug
  ...

Pull networking updates from David Millar:
 "Here are some highlights from the 2065 networking commits that
  happened this development cycle:

   1) XDP support for IXGBE (John Fastabend) and thunderx (Sunil Kowuri)

   2) Add a generic XDP driver, so that anyone can test XDP even if they
      lack a networking device whose driver has explicit XDP support
      (me).

   3) Sparc64 now has an eBPF JIT too (me)

   4) Add a BPF program testing framework via BPF_PROG_TEST_RUN (Alexei
      Starovoitov)

   5) Make netfitler network namespace teardown less expensive (Florian
      Westphal)

   6) Add symmetric hashing support to nft_hash (Laura Garcia Liebana)

   7) Implement NAPI and GRO in netvsc driver (Stephen Hemminger)

   8) Support TC flower offload statistics in mlxsw (Arkadi Sharshevsky)

   9) Multiqueue support in stmmac driver (Joao Pinto)

  10) Remove TCP timewait recycling, it never really could possibly work
      well in the real world and timestamp randomization really zaps any
      hint of usability this feature had (Soheil Hassas Yeganeh)

  11) Support level3 vs level4 ECMP route hashing in ipv4 (Nikolay
      Aleksandrov)

  12) Add socket busy poll support to epoll (Sridhar Samudrala)

  13) Netlink extended ACK support (Johannes Berg, Pablo Neira Ayuso,
      and several others)

  14) IPSEC hw offload infrastructure (Steffen Klassert)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2065 commits)
  tipc: refactor function tipc_sk_recv_stream()
  tipc: refactor function tipc_sk_recvmsg()
  net: thunderx: Optimize page recycling for XDP
  net: thunderx: Support for XDP header adjustment
  net: thunderx: Add support for XDP_TX
  net: thunderx: Add support for XDP_DROP
  net: thunderx: Add basic XDP support
  net: thunderx: Cleanup receive buffer allocation
  net: thunderx: Optimize CQE_TX handling
  net: thunderx: Optimize RBDR descriptor handling
  net: thunderx: Support for page recycling
  ipx: call ipxitf_put() in ioctl error path
  net: sched: add helpers to handle extended actions
  qed*: Fix issues in the ptp filter config implementation.
  qede: Fix concurrency issue in PTP Tx path processing.
  stmmac: Add support for SIMATIC IOT2000 platform
  net: hns: fix ethtool_get_strings overflow in hns driver
  tcp: fix wraparound issue in tcp_lp
  bpf, arm64: fix jit branch offset related to ldimm64
  bpf, arm64: implement jiting of BPF_XADD
  ...

Pull crypto updates from Herbert Xu:
 "Here is the crypto update for 4.12:

  API:
   - Add batch registration for acomp/scomp
   - Change acomp testing to non-unique compressed result
   - Extend algorithm name limit to 128 bytes
   - Require setkey before accept(2) in algif_aead

  Algorithms:
   - Add support for deflate rfc1950 (zlib)

  Drivers:
   - Add accelerated crct10dif for powerpc
   - Add crc32 in stm32
   - Add sha384/sha512 in ccp
   - Add 3des/gcm(aes) for v5 devices in ccp
   - Add Queue Interface (QI) backend support in caam
   - Add new Exynos RNG driver
   - Add ThunderX ZIP driver
   - Add driver for hardware random generator on MT7623 SoC"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (101 commits)
  crypto: stm32 - Fix OF module alias information
  crypto: algif_aead - Require setkey before accept(2)
  crypto: scomp - add support for deflate rfc1950 (zlib)
  crypto: scomp - allow registration of multiple scomps
  crypto: ccp - Change ISR handler method for a v5 CCP
  crypto: ccp - Change ISR handler method for a v3 CCP
  crypto: crypto4xx - rename ce_ring_contol to ce_ring_control
  crypto: testmgr - Allow ecb(cipher_null) in FIPS mode
  Revert "crypto: arm64/sha - Add constant operand modifier to ASM_EXPORT"
  crypto: ccp - Disable interrupts early on unload
  crypto: ccp - Use only the relevant interrupt bits
  hwrng: mtk - Add driver for hardware random generator on MT7623 SoC
  dt-bindings: hwrng: Add Mediatek hardware random generator bindings
  crypto: crct10dif-vpmsum - Fix missing preempt_disable()
  crypto: testmgr - replace compression known answer test
  crypto: acomp - allow registration of multiple acomps
  hwrng: n2 - Use devm_kcalloc() in n2rng_probe()
  crypto: chcr - Fix error handling related to 'chcr_alloc_shash'
  padata: get_next is never NULL
  crypto: exynos - Add new Exynos RNG driver
  ...

Jon Maloy says:

====================
tipc: refactor socket receive functions

We try to make the functions tipc_sk_recvmsg() and
tipc_sk_recvstream() more readable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We try to make this function more readable by improving variable names
and comments, using more stack variables, and doing some smaller changes
to the logics. We also rename the function to make it consistent with
naming conventions used elsewhere in the code.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We try to make this function more readable by improving variable names
and comments, plus some minor changes to the logics.
Reviewed-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sunil Goutham says:

====================
net: thunderx: Adds XDP support

This patch series adds support for XDP to ThunderX NIC driver
which is used on CN88xx, CN81xx and CN83xx platforms.

Patches 1-4 are performance improvement and cleanup patches
which are done keeping XDP performance bottlenecks in view.
Rest of the patches adds actual XDP support.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Driver follows a method of taking one extra reference on the
page for recycling which is fine in usual packet path where
each 64KB page is segmented into multiple receive buffers.

But in XDP mode since there is just one receive buffer per
page taking extra page reference itself becomes big bottleneck
consuming ~50% of CPU cycles due to atomic operations.

This patch adds a internal ref count in pgcache for each
page and additional page references are taken in a batch
instead of just one at a time. Internal i.e 'pgcache->ref_count'
and page's i.e 'page->_refcount' counters are compared to check
page's recyclability.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When in XDP mode reserve XDP_PACKET_HEADROOM bytes at the start
of receive buffer for XDP program to modify headers and adjust
packet start. Additional code changes done to handle such packets.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support for XDP_TX i.e transmits packet out of
the XDP TX queue mapped to the corresponding Rx queue
on which packet is received.

Since SQ for XDP TX will be used only on a single cpu i.e
SQ description creation and freeing, using atomic free count
is not necessary and will become a bottleneck. Hence added
a separate 'xdp_free_cnt' used for SQs designated for XDP
to track descriptor free count.

Changes also include
- A new entry 'xdp_page' is added to save transmitted packet's
  page pointer for later cleanup.
- XDP Tx SQ's doorbell is ringed once per NAPI instance.
- Retrieving designated SQ for packets being sent out by stack
  via 'nicvf_xmit'.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support for XDP_DROP.
Also since in XDP mode there is just a single buffer per page,
made changes to recycle DMA mapping info as well along with pages.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds basic XDP support i.e attaching a BPF program to an
interface. Also takes care of allocating separate Tx queues
for XDP path and for network stack packet transmission.

This patch doesn't support handling of any of the XDP actions,
all are treated as XDP_PASS i.e packets will be handed over to
the network stack.

Changes also involve allocating one receive buffer per page in XDP
mode and multiple in normal mode i.e when no BPF program is attached.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Get rid of unnecessary double pointer references and type casting
in receive buffer allocation code.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Optimized CQE handling with below changes
- Feeing descriptors back to SQ in bulk i.e once per NAPI
  instance instead for every CQE_TX, this will reduce number
  of atomic updates to 'sq->free_cnt'.
- Checking errors in CQE_TX and CQE_RX before calling appropriate
  fn()s to update error stats i.e reduce branching.

Also removed debug messages in packet handling path which otherwise
causes issues if DEBUG is enabled.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Receive buffer's physical address or iova will anyway not
go beyond 49bits, since it is the max supported HW address.
As per perf, updating bitfields i.e buf_addr:42 in RBDR
descriptor entry consumes lots of cpu cycles, hence changed
it to a 64bit field with alignment requirements taken care of.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adds support for page recycling for allocating receive buffers
to reduce cost of refilling RBDR ring. Also got rid of using
compound pages when pagesize is 4K, only order-0 pages now.

Only page is recycled, DMA mappings still needs to be done for
every receive buffer allocated due to following constraints
- Cannot have just one receive buffer per 64KB page.
- There is just one buffer ring shared across 8 Rx queues, so
  buffers of same page can go to any Rx queue.
- HW gives buffer address where packet has been DMA'ed and not
  the index into buffer ring.
This makes it not possible to resue DMA mapping info. So unfortunately
have to go through costly mapping route for every buffer.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should call ipxitf_put() if the copy_to_user() fails.
Reported-by: 李强 <liqiang6-s@360.cn>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jump is now the only one using value action opcode. This is going to
change soon. So introduce helpers to work with this. Convert TC_ACT_JUMP.

This also fixes the TC_ACT_JUMP check, which is incorrectly done as a
bit check, not a value check.

Fixes: e0ee84de ("net sched actions: Complete the JUMPX opcode")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
qed*: PTP bug fixes.

The series addresses couple of issues in the PTP implementation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

PTP hardware filter configuration performed by the driver for a given
user requested config is not correct for some of the PTP modes.
Following changes are needed for PTP config-filter implementation.
 1. NIG_REG_TX_PTP_EN register - Bits 0/1/2 respectively enables
    TimeSync/"V1 frame format support"/"V2 frame format support" on
    the TX side. Set the associated bits based on the user request.
 2. ptp4l application fails to operate in Peer Delay mode. Following
    changes are needed to fix this,
    a. Driver should enable (set to 0) DA #1-related bits for IPv4,
       IPv6 and MAC destination addresses in these registers:
         NIG_REG_TX_LLH_PTP_RULE_MASK
         NIG_REG_LLH_PTP_RULE_MASK
    b. NIG_REG_LLH_PTP_PARAM_MASK/NIG_REG_TX_LLH_PTP_PARAM_MASK should
       be set to 0x0 in all modes.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

PTP Tx timestamping data structures are not protected against the
concurrent access in the Tx paths. Protecting the same using atomic
bit locks.
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The IOT2000 is industrial controller platform, derived from the Intel
Galileo Gen2 board. The variant IOT2020 comes with one LAN port, the
IOT2040 has two of them. They can be told apart based on the board asset
tag in the DMI table.

Based on patch by Sascha Weisenberger.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Sascha Weisenberger <sascha.weisenberger@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>