- 06 Oct, 2012 40 commits
-
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by:
Peter Senna Tschudin <peter.senna@gmail.com> [g.liakhovetski@gmx.de: follow the soc_camera.c style: check "ret < 0"] Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Peter Senna Tschudin authored
Convert a nonnegative error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> [mchehab@redhat.com: Second hunk removed, as it doesn't apply anymore, due to a merge conflict] Signed-off-by:
-
Sachin Kamat authored
devm_kzalloc() has been used to simplify error handling. While at it, the soc_camera_device_register function has been moved to save a few lines of code and a variable. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> [g.liakhovetski@gmx.de: remove a superfluous empty line] Signed-off-by:
-
Sachin Kamat authored
module_platform_driver simplifies the code by eliminating module_init and module_exit calls. Signed-off-by:
-
Javier Martin authored
Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> [g.liakhovetski@gmx.de: also don't clear pcdev->resizing in .try_fmt()] Signed-off-by:
-
Sylwester Nawrocki authored
Replace the deprecated V4L2_SEL_TGT_*_ACTIVE selection target names with their new unified counterparts. Compatibility definitions are already in linux/v4l2-common.h. Signed-off-by:
Sylwester Nawrocki <sylvester.nawrocki@gmail.com> Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Peter Senna Tschudin authored
removes unnecessary semicolon Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by:
-
Alfredo Jesús Delaiti authored
Adds audio support for input YPbPr, AV and S-Video on Mygica X8507 card. Remains to be done: IR, FM and ISDBT Signed-off-by:
Alfredo J. Delaiti <alfredodelaiti@netscape.net> Signed-off-by:
-
Antti Palosaari authored
drivers/media/dvb-frontends/cxd2820r_core.c: In function 'cxd2820r_attach': drivers/media/dvb-frontends/cxd2820r_core.c:691:10: warning: unused variable 'gpio' [-Wunused-variable] Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Tomasz Stanislawski authored
This patch extends s5p-hdmi platform data by a GPIO identifier for Hot-Plug-Detection pin. Signed-off-by:
Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Arun Kumar K authored
The vfl_dir flag is presently set to VFL_DIR_M2M only for decoder. The encoder is not working because of this. So adding this flag to the encoder part also. Signed-off-by:
Arun Kumar K <arun.kk@samsung.com> Acked-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Jeongtae Park authored
Multi Format Codec 6.x is a hardware video coding acceleration module present in new Exynos5 SoC series. It is capable of handling several new video codecs for decoding and encoding. Signed-off-by:
Jeongtae Park <jtp.park@samsung.com> Signed-off-by:
Janghyuck Kim <janghyuck.kim@samsung.com> Signed-off-by:
Jaeryul Oh <jaeryul.oh@samsung.com> Signed-off-by:
Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by:
-
Jeongtae Park authored
Adds register definitions for MFC v6.x firmware Signed-off-by:
-
Arun Kumar K authored
MFC variant data replaces various macros used in the driver which will change in a different version of MFC hardware. Also does a cleanup of MFC context structure and common files. Signed-off-by:
-
Arun Kumar K authored
Modifies the driver to use a callback based architecture for hardware dependent calls. This architecture is suitable for supporting co-existence with newer versions of MFC hardware. Signed-off-by:
-
Arun Kumar K authored
The patch renames hardware specific opr and cmd files to opr_v5 and cmd_v5 respectively. This is done for accomodating firmware v6. Also the shared memory management files are removed and the functionality is added to the opr_v5 file. Signed-off-by:
-
Arun Kumar K authored
New controls are added for supporting H264 encoding features like: - MVC frame packing, - flexible macroblock ordering, - arbitrary slice ordering, - hierarchical coding. Signed-off-by:
-
Arun Kumar K authored
Add the following new fourcc definitions, for multiplanar YCbCr: V4L2_PIX_FMT_NV21M, V4L2_PIX_FMT_NV12MT_16X16 and compressed formats: V4L2_PIX_FMT_H264_MVC, V4L2_PIX_FMT_VP8. Signed-off-by:
-
Sylwester Nawrocki authored
Depending on the sensor configuration it might be required to adjust the CSIS's output pixel clock so it is greater than its input pixel clock, in order to avoid the input data FIFO overflow. Use platform data to select SCLK_CSIS clock from CMU as a source, rather than CSI APB clock. Signed-off-by:
-
Sylwester Nawrocki authored
alignment, fixed_phy_vdd and phy_enable fields are now unused so removed them. The data alignment is now derived directly from media bus pixel code, phy_enable callback has been replaced with direct function call and fixed_phy_vdd was dropped in commit 438df3eb "[media] s5p-csis: Handle all available power supplies". Signed-off-by:
-
Sylwester Nawrocki authored
The phy_enable callback is common for all Samsung SoC platforms, replace it with direct function call so the MIPI-CSI2 DPHY control is also possible on device tree instantiated platforms. Signed-off-by:
-
Mauro Carvalho Chehab authored
* samsung_platform_data: ARM: samsung: move platform_data definitions ARM: orion: move platform_data definitions ARM: nomadik: move platform_data definitions ARM: w90x900: move platform_data definitions ARM: vt8500: move platform_data definitions ARM: tegra: move sdhci platform_data definition ARM: sa1100: move platform_data definitions ARM: pxa: move platform_data definitions ARM: netx: move platform_data definitions ARM: msm: move platform_data definitions ARM: imx: move platform_data definitions ARM: ep93xx: move platform_data definitions ARM: davinci: move platform_data definitions ARM: at91: move platform_data definitions
-
Sylwester Nawrocki authored
Rename MIPI-CSIS regulator supply names to match definitions in the driver after commit "s5p-csis: Change regulator supply names". Signed-off-by:
Kukjin Kim <kgene.kim@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Rename the regulator supply names to more meaningful ones. It's a prerequisite for adding device tree support. Signed-off-by:
-
Sylwester Nawrocki authored
Replace pdev argument __s5p_mipi_phy_control() helper with plain int so MIPI-CSIS hardware instance index can be passed directly making the function usable on platforms instantiated from device tree. Signed-off-by:
-
Sylwester Nawrocki authored
The MIPI-CSI2 bus data alignment is now being derived from the media bus pixel code, the drivers don't use the corresponding structure fields, so remove them. Also remove the s5p_csis_phy_enable callback which is now used directly by s5p-csis driver. Signed-off-by:
-
Hans Verkuil authored
Clarify the behavior of v4l2_buffer in the multiplanar case, including fixing a false statement: you can't set m.planes to NULL when calling DQBUF. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Hans Verkuil authored
The core code for PREPARE_BUF didn't take the multiplanar case into account, which might cause page faults. Handle PREPARE_BUF just like QUERYBUF and QBUF/DQBUF. Signed-off-by:
-
Hans Verkuil authored
length should be set to num_planes in __fill_v4l2_buffer(). That way the caller knows how many planes there are in the buffer. Signed-off-by:
-
Hans Verkuil authored
The plane verification should be done before actually queuing or dequeuing buffers, so move it out of __fill_v4l2_buffer and __fill_vb_buffer and call it as a separate step. This also makes it possible to change the return type of __fill_v4l2/vb_buffer to void. The dqbuf case took some special care: before removing a buffer from the done_list you have to verify that the receiving v4l2_buffer has enough room for all the planes. The number of planes can differ between buffers due to the fact that buffers for other formats can be prepared using VIDIOC_PREPARE_BUF. Signed-off-by:
-
Lad, Prabhakar authored
set device_caps and also change the driver and bus_info to proper values as per standard. Signed-off-by:
Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by:
Manjunath Hadli <manjunath.hadli@ti.com> Acked-by:
-
Lad, Prabhakar authored
from commit with id 896f38f5 it's mandatory to check the return code of vb2_queue_init(). Signed-off-by:
-
Lad, Prabhakar authored
vpif_display relied on a 1-1 mapping of output and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of outputs. Each output refers to a subdev and has routing information. An output does not have to have a subdev. The initial output for each channel is set to the fist output. Currently missing is support for associating multiple subdevs with an output. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Signed-off-by:
-
Hans Verkuil authored
The s_routing function should not try to detect a signal. It is a really bad idea to try to detect a valid video signal and return an error if you can't. Changing input should do just that and nothing more. Also don't power on the ADCs on s_routing, instead do that on querystd. Signed-off-by:
-
Hans Verkuil authored
struct vpif_interface is channel specific, not subdev specific. Move it to the channel config. Signed-off-by:
-
Hans Verkuil authored
This makes it easier to have outputs without subdevs. This needs more work. The way the outputs are configured should be identical to how inputs are configured. Signed-off-by:
-
Hans Verkuil authored
vpif_capture relied on a 1-1 mapping of input and subdev. This is not necessarily the case. Separate the two. So there is a list of subdevs and a list of inputs. Each input refers to a subdev and has routing information. An input does not have to have a subdev. The initial input for each channel is set to the fist input. Currently missing is support for associating multiple subdevs with an input. Signed-off-by:
-
