- 07 Sep, 2005 40 commits
-
-
Richard Purdie authored
Fix a couple of compile errors in the corgi keyboard driver. Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Pierre Ossman authored
Only show the scr file in sysfs for SD cards. Previously this was present for all cards but had a contents of 0 for MMC cards. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
-
Pierre Ossman authored
Add support for Secure Digital specific features in the wbsd driver. Adds support for read-only switch and wide bus transfers. Signed-off-by:
-
Richard Purdie authored
Add a write protection switch handling code to the PXA MMC driver so that platform specific code can provide it if available. Signed-off-by:
-
Pierre Ossman authored
Credit where credit is due. Signed-off-by:
-
Pierre Ossman authored
Infrastructure for 4-bit bus transfers with SD cards. Signed-off-by:
-
Pierre Ossman authored
Export the SCR register through sysfs. Signed-off-by:
-
Pierre Ossman authored
Read the SD specific SCR register from the card. Signed-off-by:
-
Pierre Ossman authored
Support for the read-only switch on SD cards which must be enforced by the host. Signed-off-by:
-
Pierre Ossman authored
Support for the Secure Digital protocol in the MMC layer. A summary of the legal issues surrounding SD cards, as understood by yours truly: Members of the Secure Digital Association, hereafter SDA, are required to sign a NDA[1] before given access to any specifications. It has been speculated that including an SD implementation would forbid these members to redistribute Linux. This is the basic problem with SD support so it is unclear if it even is a problem since it has no effect on those of us that aren't members. The SDA doesn't seem to enforce these rules though since the patches included here are based on documentation made public by some of the members. The most complete specs[2] are actually released by Sandisk, one of the founding companies of the SDA. Because of this the NDA is considered a non-issue by most involved in the discussions concerning these patches. It might be that the SDA is only interested in protecting the so called "secure" bits of SD, which so far hasn't been found in any public spec. (The card is split into two sections, one "normal" and one "secure" which has an access scheme similar to TPM:s). (As a side note, Microsoft is working to make things easier for us since they want to be able to include the source code for a SD driver in one of their development kits. HP is making sure that the new NDA will allow a Linux implementation. So far only the SDIO specs have been opened up[3]. More will hopefully follow.) [1] http://www.sdcard.org/membership/images/ippolicy.pdf [2] http://www.sandisk.com/pdf/oem/ProdManualSDCardv1.9.pdf [3] http://www.sdcard.org/sdio/Simplified%20SDIO%20Card%20Specification.pdf This patch contains the central parts of the SD support. If no MMC cards are found on a bus then the MMC layer proceeds looking for SD cards. Helper functions are extended to handle the special needs of SD cards. Signed-off-by:
-
Roman Zippel authored
This adds NLS support to HFS. Using the kernel options iocharset and codepage it's possible to map the disk encoding to a local mapping. If these options are not used, it falls back to the old direct mapping. Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Roman Zippel authored
This adds support for show_options. It also fixes some namespace polution in the hfsplus driver. Signed-off-by:
-
Roman Zippel authored
This removes some old debug code, which is no longer needed. Signed-off-by:
-
Corey Minyard authored
The IPMI power control function proc_write_chassctrl was badly written, it directly used userspace pointers, it assumed that strings were NULL terminated, and it used the evil sscanf function. This converts over to using the sysctl interface for this data and changes the semantics to be a little more logical. Signed-off-by:
Corey Minyard <minyard@acm.org> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by:
-
Corey Minyard authored
This removes the unused "all_cmd_rcvr" variable from the IPMI driver. Signed-off-by:
-
Corey Minyard authored
Clean up various style issues in the IPMI driver. Should be no functional changes. Signed-off-by:
-
Corey Minyard authored
This patch allows Dell servers with IPMI controllers that predate IPMI 1.5 to use the standard poweroff or powercycle commands. These systems firmware don't set the chassis capability bit in the Get Device ID, but they do implement the standard poweroff and powercycle commands. Tested on RHEL3 kernel 2.4.21-20.ELsmp on a PowerEdge 2600. The standard ipmi_poweroff driver cannot drive these systems. With this patch, they power off or powercycle as expected. Signed-off-by:
Matt Domsch <Matt_Domsch@dell.com> Signed-off-by:
-
Corey Minyard authored
The "null message handler" in the IPMI driver is used in startup and panic situations to handle messages. It was only designed to work with messages from the local management controller, but in some cases it was used to get messages from remote managmenet controllers, and the system would then panic. This patch makes the "null message handler" in the IPMI driver more general so it works with any kind of message. Signed-off-by:
-
Corey Minyard authored
This adds MODULE_VERSION, MODULE_DESCRIPTION, and MODULE_AUTHOR tags to the IPMI driver modules. Also changes the MODULE_VERSION to remove the prepended 'v' on each value, consistent with the module versioning policy. This patch also removes all the version information from everything except the ipmi_msghandler module. Signed-off-by:
-
Corey Minyard authored
The ipmi driver does not have a way to handle firmware-generated events which have the OEM[012] Data Available flags set. In such a case, the SMS_ATN bit may never get cleared by firmware, leaving the driver looping infinitely but never able to make any progress. This patch first simplifies storage and use of the data returned from an IPMI Get Device ID command. It then creates a new per-OEM handler hook, which should know how to handle events with the OEM[012] Data Available flags set. It then uses this to implement a workaround for IPMI 1.5-capable Dell PowerEdge servers which are susceptable to setting the OEM[012] Data Available flags when the driver can't handle it. Signed-off-by:
-
Corey Minyard authored
The IPMI driver include file needs to include compiler.h so it has definitions for __user and such. Signed-off-by:
-
Corey Minyard authored
There are some interactions between IPMI NMI timeouts and the other operations of the IPMI driver. This make sure those interactions are handled properly. Signed-off-by:
-
Corey Minyard authored
Fix some problems with the high-res timer support. Signed-off-by:
-
Corey Minyard authored
IPMI allows multiple IPMB channels on a single interface, and each channel might have a different IPMB address. However, the driver has only one IPMB address that it uses for everything. This patch adds new IOCTLS and a new internal interface for setting per-channel IPMB addresses and LUNs. New systems are coming out with support for multiple IPMB channels, and they are broken without this patch. Signed-off-by:
-
Andrey Panin authored
This patch replaces homebrew DMI scanning code in IPMI System Interface driver with dmi_find_device() call. Signed-off-by:
Andrey Panin <pazke@donpac.ru> Cc: Corey Minyard <minyard@acm.org> Signed-off-by:
-
Pekka Enberg authored
This patch introduces a memory-leak tracking version of kzalloc for ALSA. Signed-off-by:
Pekka Enberg <penberg@cs.helsinki.fi> Cc: Jaroslav Kysela <perex@suse.cz> Signed-off-by:
Jiri Slaby <xslaby@fi.muni.cz> Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka Enberg authored
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by:
-
Pekka J Enberg authored
This patch introduces a kzalloc wrapper and converts kernel/ to use it. It saves a little program text. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Robert Love authored
Background: 1) dmi_check_system() returns the count of the number of matches. Zero thus means no matches. 2) A match callback can return nonzero to stop the match checking. Bug: The count is incremented after we check for the nonzero return value, so it does not reflect the actual count. We could say this is intended, for some dumb reason, except that it means that a match on the first check returns zero--no matches--if the callback returns nonzero. Attached patch implements the count before calling the callback and thus before potentially short-circuiting. Signed-off-by:
Robert Love <rml@novell.com> Cc: Andrey Panin <pazke@donpac.ru> Signed-off-by:
-
Andrey Panin authored
This patch adds onboard devices and IPMI BMC discovery into DMI scan code. Drivers can use dmi_find_device() function to search for devices by type and name. Signed-off-by:
-
Andrey Panin authored
This patch changes dmi_string() function to allocate string copy by itself, to avoid code duplication in the next patch. Signed-off-by:
-
Andrey Panin authored
DMI debugging code is unused for ages. This patch removes it. Signed-off-by:
-
Andrey Panin authored
After elimination of central DMI blacklist dmi_scan_machine() function became a wrapper for dmi_iterate(). This patch moves some code around to kill unneeded function. Signed-off-by:
-
Miklos Szeredi authored
cifs_create() did totally the wrong thing with nd->intent.open.flags: it interpreted nd->intent.open.flags as the original open flags, not the one transformed for open_namei(). Also it used the intent data even if it was not filled in (if called from sys_mknod()). Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Cc: <viro@parcelfarce.linux.theplanet.co.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by:
-
Miklos Szeredi authored
64 bit architectures all implement their own compatibility sys_open(), when in fact the difference is simply not forcing the O_LARGEFILE flag. So use the a common function instead. Signed-off-by:
-
