- 13 Nov, 2018 14 commits
-
-
Vijendar Mukunda authored
PCM platform driver binds to the platform device created by ACP3x PCI device. PCM driver registers ALSA DMA and CPU DAI components with ASoC framework. Signed-off-by:
Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com> Tested-by:
Ravulapati Vishnu vardhan Rao <Vishnuvardhanrao.Ravulapati@amd.com> Signed-off-by:
Vijendar Mukunda <vijendar.mukunda@amd.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Vijendar Mukunda authored
ACP 3x IP has I2S controller device as one of IP blocks. Create a platform device for it, so that the PCM platform driver can be bound to this device. Pass PCI resources like MMIO, irq to the platform device. Signed-off-by:
-
Maruthi Srinivas Bayyavarapu authored
ACP 3.0 is a PCI audio device. This patch adds PCI driver to bind to this device and get PCI resources. Signed-off-by:
Sanju R Mehta <sanju.mehta@amd.com> Tested-by:
-
Maruthi Srinivas Bayyavarapu authored
ACP 3.x is a new audio block in raven. Added register header of the same. Signed-off-by:
-
Bard liao authored
Add Icelake device id. Also, Icelake's pin2port mapping table is complicated. So we use a mapping table to do the pin2port mapping. Signed-off-by:
Bard liao <bard.liao@intel.com> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
-
Richard Fitzgerald authored
Factor out the duplicated initialization statements from wm_adsp1_init() and wm_adsp2_init() into new function wm_adsp_common_init(). The entire content of wm_adsp1_init() is the common code but it is convenient to retain this exported function to hide what we currently treat as common init (which might change in the future) and also make clear the difference between an ADSP1 entry point and common code. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by:
-
Peter Ujfalusi authored
Initializing to -EINVAL is not correct as the variables are unsigned and if buffer_size is 0 then they are not used anyway. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Tested-by:
-
Peter Ujfalusi authored
The driver will not probe if the pdata is not provided or created. Signed-off-by:
-
Peter Ujfalusi authored
The mcbsp.c was copied a while back from arch/arm/plat-omap/mcbsp.c and it contained a mix of McBSP and McBSP sidetone functions. Create new file structure with the following split: omap-mcbsp.c - McBSP related functions omap-mcbsp-st.c - McBSP sidetone functionality omap-mcbsp-priv.h - Private header for internal use omap-mcbsp.h - Header for user drivers I have tried to do the code move with minimal code change, cleanup patches can be based on the new structure. Signed-off-by:
-
Peter Ujfalusi authored
Check if the McBSP have FIFO in the omap_mcbsp_set_threshold() and omap_mcbsp_dai_delay() delay function to skip calling the lower layer if it is not needed. Signed-off-by:
-
Peter Ujfalusi authored
We either start/stop TX or RX, never both. Move the tx/rx direction selection within the functions. Signed-off-by:
-
Peter Ujfalusi authored
The parameter name of dev_id is leftover from the old times when we passed numeric ID as data for the interrupt handlers. The mcbsp_rx and mcbsp_tx is misleading as they are pointers to the mcbsp struct. Signed-off-by:
-
Peter Ujfalusi authored
It is configured runtime so no need to initialize it. Signed-off-by:
-
Peter Ujfalusi authored
Make the omap_mcbsp_dma_reg_params() a bit more intuitive to read for the first glance by using SNDRV_PCM_STREAM_PLAYBACK/CAPTURE and to group the outermost if case by stream direction. While there, fix the outdated comment for the function. Signed-off-by:
-
- 09 Nov, 2018 1 commit
-
-
Kuninori Morimoto authored
commit c0ea089d ("ASoC: rsnd: rsnd_mod_name() handles both name and ID") merged "name" and "ID" on rsnd_mod_name() to handle sub-ID (= for CTU/BUSIF). Then, it decided to share static char to avoid pointless memory. But, it doesn't work correctry in below case, because last called name will be used. dev_xxx(dev, "%s is connected to %s\n", rsnd_mod_name(mod_a), /* ssiu[00] */ rsnd_mod_name(mod_b)); /* ssi[0] */ -> rcar_sound ec500000.sound: ssi[0] is connected to ssi[0] ~~~~~~ ~~~~~~ We still don't want to have pointless memory, so let's use ring buffer. 16byte x 5 is very enough for this purpose. dev_xxx(dev, "%s is connected to %s\n", rsnd_mod_name(mod_a), /* ssiu[00] */ rsnd_mod_name(mod_b)); /* ssi[0] */ -> rcar_sound ec500000.sound: ssiu[00] is connected to ssi[0] ~~~~~~~~ ~~~~~~ Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
- 07 Nov, 2018 1 commit
-
-
Yangtao Li authored
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
- 06 Nov, 2018 24 commits
-
-
Kuninori Morimoto authored
This patch adds TDM Split mode support. rsnd driver is assuming audio-graph-scu-card is used for Sound Card. This is very simple sample DT settings to use it. sound_card: sound { compatible = "audio-graph-scu-card"; ... convert-channels = <8>; /* TDM Split */ dais = <&rsnd_port0 /* playback ch1/ch2 */ &rsnd_port1 /* playback ch3/ch4 */ &rsnd_port2 /* playback ch5/ch6 */ &rsnd_port3 /* playback ch7/ch8 */ >; }; audio-codec { ... port { codec_0: endpoint@1 { remote-endpoint = <&rsnd_ep0>; }; codec_1: endpoint@2 { remote-endpoint = <&rsnd_ep1>; }; codec_2: endpoint@3 { remote-endpoint = <&rsnd_ep2>; }; codec_3: endpoint@4 { remote-endpoint = <&rsnd_ep3>; }; }; }; &rcar_sound { ... ports { rsnd_port0: port@0 { rsnd_ep0: endpoint { remote-endpoint = <&codec_0>; ... playback = <&ssiu30 &ssi3>; }; }; rsnd_port1: port@1 { rsnd_ep1: endpoint { remote-endpoint = <&codec_1>; ... playback = <&ssiu31 &ssi3>; }; }; rsnd_port2: port@2 { rsnd_ep2: endpoint { remote-endpoint = <&codec_2>; ... playback = <&ssiu32 &ssi3>; }; }; rsnd_port3: port@3 { rsnd_ep3: endpoint { remote-endpoint = <&codec_3>; ... playback = <&ssiu33 &ssi3>; }; }; }; }; Signed-off-by: -
Kuninori Morimoto authored
This patch adds TDM Split mode support. rsnd driver is assuming audio-graph-scu-card is used for Sound Card. Signed-off-by:
-
Kuninori Morimoto authored
Gen2 has BUSIF0-3, Gen3 has BUSIF0-7 on some SSIU. Current driver is assuming it is using BUSIF0 as default. Thus, SSI is attaching SSIU (with BUSIF0) by using rsnd_ssiu_attach(). But, TDM split mode also needs other BUSIF to use it. This patch adds missing SSIU BUSIFx support. BUSIF is handled by SSIU instead of SSI anymore. Thus, its settings no longer needed on SSI node on DT. This patch removes its settings from Document, but driver is still keeping compatibility. Thus, old DT style is still working. But, to avoid confusing, it doesn't indicate old compatibility things on Document. New SoC should have SSIU on DT from this patch. 1) old style DT is still supported (= no rcar_sound,ssiu node on DT) 2) If ssiu is not indicated on playback/capture, BUSIF0 will be used as default playback = <&ssi3>; /* ssiu30 will be selected */ 3) you can select own ssiu playback = <&ssi32 &ssi3>; /* ssiu32 will be selected */ Signed-off-by:
-
Kuninori Morimoto authored
Gen2 has BUSIF0-3, Gen3 has BUSIF0-7 on some SSIU. Current driver is assuming it is using BUSIF0 as default. Thus, SSI is attaching SSIU (with BUSIF0) by using rsnd_ssiu_attach(). But, TDM split mode also needs other BUSIF to use it. This patch adds missing SSIU BUSIFx support. BUSIF is handled by SSIU instead of SSI anymore. Thus, its settings no longer needed on SSI node on DT. This patch removes its settings from Document, but driver is still keeping compatibility. Thus, old DT style is still working. But, to avoid confusing, it doesn't indicate old compatibility things on Document. New SoC should have SSIU on DT from this patch. 1) old style DT is still supported (= no rcar_sound,ssiu node on DT) 2) If ssiu is not indicated on playback/capture, BUSIF0 will be used as default playback = <&ssi3>; /* ssiu30 will be selected */ 3) you can select own ssiu playback = <&ssi32 &ssi3>; /* ssiu32 will be selected */ Signed-off-by:
-
Kuninori Morimoto authored
It has duplicated DT example code on Document. This patch tidyup these. Signed-off-by:
-
Kuninori Morimoto authored
converted rate/chan are handled each rated module, but it will be used other module too. For examle, converted channel is currently used for CTU, but, it will be used for TDM Split mode, too. This patch move/merge SRC/CTU hw_param under core.c and handles converted rate/chan under rsnd_dai_stream. Signed-off-by:
-
Kuninori Morimoto authored
Current driver is supporting HDMI output, and its information are handled under ssi.c. But, it is stream information. Let's move it from ssi.c to core.c. Signed-off-by:
-
Kuninori Morimoto authored
rdai->playback/rdai->capture are defined as io_playback/io_capture on __rsnd_dai_probe(). Let's use it instead of original one. Signed-off-by:
-
Kuninori Morimoto authored
Current rsnd driver has rsnd_runtime_is_ssi_xxx() functions, but it is not only related to SSI, thus, it is misunderstandable. This patch renames it. Signed-off-by:
-
Kuninori Morimoto authored
DTC commit df536831d02c ("checks: add graph binding checks") is checking endpoint bidirectional, and it is upstreamed to linux by commit 50aafd60 ("scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc"). Let's remove own bidirectional check Signed-off-by: -
Kuninori Morimoto authored
Current driver is checking situation that can not happen. This patch removes over-kill check Signed-off-by:
-
Kuninori Morimoto authored
DTC commit df536831d02c ("checks: add graph binding checks") is checking endpoint bidirectional, and it is upstreamed to linux by commit 50aafd60 ("scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc"). Let's remove own bidirectional check Signed-off-by: -
Kuninori Morimoto authored
DTC commit df536831d02c ("checks: add graph binding checks") is checking endpoint bidirectional, and it is upstreamed to linux by commit 50aafd60 ("scripts/dtc: Update to upstream version v1.4.6-21-g84e414b0b5bc"). Let's remove own bidirectional check Signed-off-by: -
Pierre-Louis Bossart authored
For some reason the RVP/LeafHill SSDT exposes an INT34C3 ID which is used on other boards to point to the TDF8532 amplifier. Yay BIOS. Add a DMI-quirk to ignore this ID and check for other valid machine driver descriptors. Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Bard liao authored
Add firmware/topology information for APL RVP Reviewed-by:
-
Pierre-Louis Bossart authored
GFP_ATOMIC is not required on any Intel drivers, use GFP_KERNEL instead. A first cleanup was merged in April but missed a number occurrences and new ones were added by copy/paste inertia. While we are at it, make checkpatch happy with a sizeof(*msg) Reviewed-by:
-
Pierre-Louis Bossart authored
s/skylaye/skylake Reviewed-by:
-
Pierre-Louis Bossart authored
Don't rely on internal Atom/SST-specific data structures, use generic interface to let other drivers use the same machine drivers as is, e.g. SOF to support BYT-CR devices Tested-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Pierre-Louis Bossart authored
Don't rely on internal Skylake-specific data structures, use generic interface to let other drivers use the same machine driver as is, e.g. SOF to support HDaudio codecs and HDMI outputs. Tested on LeafHill CRB board, no regression seen with this change. Reviewed-by:
-
Pierre-Louis Bossart authored
The machine drivers may need information provided by the platform driver. Currently the information is passed using pdata specific to each plaform driver. This prevents other drivers, such as SOF, from reusing machine drivers directly. Add a new structure which contains the required fields. This proposal requires a bit more work on the platform side but this generic interface helps reuse code directly. Reviewed-by:
-
Arnd Bergmann authored
Enabling both the old AC97_BUS code and the new AC97_BUS_COMPAT causes problems because both modules provide an exported snd_ac97_reset() function. I had tried to fix the problem of having both coexist earlier, but my patch only prevented them from being built-in. This is because of a special Kconfig feature that lets a symbol have a dependency on another one being disabled, but still allow both to be loadable modules. Changing the dependency to =n avoids that problem, now we can only build the new driver if the old one is completely disabled. If we could figure out a way to let rename one of the reset functions and have each driver link to exactly the old or the compat code, that would also work, but I could not find if that's possible. Fixes: bec5ecdf ("ASoC: pxa: avoid AC97_BUS build warning") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Peter Ujfalusi authored
The audio support is done via simple-audio-card via DT, the custom driver is no longer needed. Signed-off-by:
-
Kuninori Morimoto authored
"DACn Zero Flag" and "ADCn Overflow Flag" are read-only status register. These information are needed for driver not for user. Let's remove these from snd_kcontrol_new. There is no detail explanation for these register on datasheet, but, judging from its behavior, it seems these register needs clock to read. Otherwise, I2C returns error. Therefor, amixer command will be failed under non working timing. Without this patch, user often fail amixer command. This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 TDM sound. Signed-off-by:
-
Axel Lin authored
snd_soc_component_update_bits() will only update the mask bits, so remove the redundant snd_soc_component_read32(). Signed-off-by:
Axel Lin <axel.lin@ingics.com> Reviewed-by:
Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
-
