- 13 Mar, 2019 1 commit
-
-
Alistair Strachan authored
commit 47bb1179 upstream. When initially testing the Camera Terminal Descriptor wTerminalType field (buffer[4]), no mask is used. Later in the function, the MSB is overloaded to store the descriptor subtype, and so a mask of 0x7fff is used to check the type. If a descriptor is specially crafted to set this overloaded bit in the original wTerminalType field, the initial type check will fail (falling through, without adjusting the buffer size), but the later type checks will pass, assuming the buffer has been made suitably large, causing an overflow. Avoid this problem by checking for the MSB in the wTerminalType field. If the bit is set, assume the descriptor is bad, and abort parsing it. Originally reported here: https://groups.google.com/forum/#!topic/syzkaller/Ot1fOE6v1d8 A similar (non-compiling) patch was provided at that time. Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Alistair Strachan <astrachan@google.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 Mar, 2019 39 commits
-
-
Greg Kroah-Hartman authored
-
Daniel Borkmann authored
commit 3612af78 upstream. Marek reported that he saw an issue with the below snippet in that timing measurements where off when loaded as unpriv while results were reasonable when loaded as privileged: [...] uint64_t a = bpf_ktime_get_ns(); uint64_t b = bpf_ktime_get_ns(); uint64_t delta = b - a; if ((int64_t)delta > 0) { [...] Turns out there is a bug where a corner case is missing in the fix d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths"), namely fixup_bpf_calls() only checks whether aux has a non-zero alu_state, but it also needs to test for the case of BPF_ALU_NON_POINTER since in both occasions we need to skip the masking rewrite (as there is nothing to mask). Fixes: d3bd7413 ("bpf: fix sanitation of alu op with pointer / scalar type from different paths") Reported-by:
Marek Majkowski <marek@cloudflare.com> Reported-by:
Arthur Fabre <afabre@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/netdev/CAJPywTJqP34cK20iLM5YmUMz9KXQOdu1-+BZrGMAGgLuBWz7fg@mail.gmail.com/T/Acked-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Martin Wilck authored
commit 4a067cf8 upstream. Up to 4.12, __scsi_error_from_host_byte() would reset the host byte to DID_OK for various cases including DID_NEXUS_FAILURE. Commit 2a842aca ("block: introduce new block status code type") replaced this function with scsi_result_to_blk_status() and removed the host-byte resetting code for the DID_NEXUS_FAILURE case. As the line set_host_byte(cmd, DID_OK) was preserved for the other cases, I suppose this was an editing mistake. The fact that the host byte remains set after 4.13 is causing problems with the sg_persist tool, which now returns success rather then exit status 24 when a RESERVATION CONFLICT error is encountered. Fixes: 2a842aca "block: introduce new block status code type" Signed-off-by:
Martin Wilck <mwilck@suse.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
YueHaibing authored
commit f612acfa upstream. syzkaller report this: BUG: memory leak unreferenced object 0xffffc9000488d000 (size 9195520): comm "syz-executor.0", pid 2752, jiffies 4294787496 (age 18.757s) hex dump (first 32 bytes): ff ff ff ff ff ff ff ff a8 00 00 00 01 00 00 00 ................ 02 00 00 00 00 00 00 00 80 a1 7a c1 ff ff ff ff ..........z..... backtrace: [<000000000863775c>] __vmalloc_node mm/vmalloc.c:1795 [inline] [<000000000863775c>] __vmalloc_node_flags mm/vmalloc.c:1809 [inline] [<000000000863775c>] vmalloc+0x8c/0xb0 mm/vmalloc.c:1831 [<000000003f668111>] kernel_read_file+0x58f/0x7d0 fs/exec.c:924 [<000000002385813f>] kernel_read_file_from_fd+0x49/0x80 fs/exec.c:993 [<0000000011953ff1>] __do_sys_finit_module+0x13b/0x2a0 kernel/module.c:3895 [<000000006f58491f>] do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 [<00000000ee78baf4>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<00000000241f889b>] 0xffffffffffffffff It should goto 'out_free' lable to free allocated buf while kernel_read fails. Fixes: 39d637af ("vfs: forbid write access when reading a file into memory") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Thibaut Sautereau <thibaut@sautereau.fr> Signed-off-by:
-
Matthias Kaehlcke authored
commit c4f5627f upstream. With commit e1633762 ("Bluetooth: Handle bt_accept_enqueue() socket atomically") lock_sock[_nested]() is used to acquire the socket lock before manipulating the socket. lock_sock[_nested]() may block, which is problematic since bt_accept_enqueue() can be called in bottom half context (e.g. from rfcomm_connect_ind()): [<ffffff80080d81ec>] __might_sleep+0x4c/0x80 [<ffffff800876c7b0>] lock_sock_nested+0x24/0x58 [<ffffff8000d7c27c>] bt_accept_enqueue+0x48/0xd4 [bluetooth] [<ffffff8000e67d8c>] rfcomm_connect_ind+0x190/0x218 [rfcomm] Add a parameter to bt_accept_enqueue() to indicate whether the function is called from BH context, and acquire the socket lock with bh_lock_sock_nested() if that's the case. Also adapt all callers of bt_accept_enqueue() to pass the new parameter: - l2cap_sock_new_connection_cb() - uses lock_sock() to lock the parent socket => process context - rfcomm_connect_ind() - acquires the parent socket lock with bh_lock_sock() => BH context - __sco_chan_add() - called from sco_chan_add(), which is called from sco_connect(). parent is NULL, hence bt_accept_enqueue() isn't called in this code path and we can ignore it - also called from sco_conn_ready(). uses bh_lock_sock() to acquire the parent lock => BH context Fixes: e1633762 ("Bluetooth: Handle bt_accept_enqueue() socket atomically") Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Kai-Heng Feng authored
commit 00df214b upstream. Realtek bluetooth may not work after reboot: [ 12.446130] Bluetooth: hci0: RTL: rtl: unknown IC info, lmp subver a99e, hci rev 826c, hci ver 0008 This is a regression introduced by commit 26503ad2 ("Bluetooth: btrtl: split the device initialization into smaller parts"). The new logic errors out early when no matching IC info can be found, in this case it means the firmware is already loaded. So let's assume the firmware is already loaded when we can't find matching IC info, like the old logic did. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201921 Fixes: 26503ad2 ("Bluetooth: btrtl: split the device initialization into smaller parts") Cc: stable@vger.kernel.org # 4.19+ Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Luis Chamberlain authored
commit 344c0152 upstream. commit a6a9be92 ("selftests: firmware: return Kselftest Skip code for skipped tests") by Shuah modified failures to return the special error code of $ksft_skip (4). We have a corner case issue where we *do* want to verify_reqs(). Cc: <stable@vger.kernel.org> # >= 4.18 Fixes: a6a9be92 ("selftests: firmware: return Kselftest Skip code for for skipped tests") Signed-off-by:
-
Karoly Pados authored
commit 7b0b644b upstream. Current GPIO code in cp210x fails to take USB autosuspend into account, making it practically impossible to use GPIOs with autosuspend enabled without user configuration. Fix this like for ftdi_sio in a previous patch. Tested on a CP2102N. Signed-off-by:
Karoly Pados <pados@pados.hu> Fixes: cf5276ce ("USB: serial: cp210x: Adding GPIO support for CP2105") Cc: stable <stable@vger.kernel.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit 82f844c2 upstream. Make sure the receiver is powered (and booted) before enabling the wakeup interrupt to avoid spurious interrupts due to a floating input. Similarly, disable the interrupt before powering off on probe errors and on unbind. Fixes: d2efbbd1 ("gnss: add driver for sirfstar-based receivers") Cc: stable <stable@vger.kernel.org> # 4.19 Signed-off-by:
-
Max Filippov authored
commit d90b88fd upstream. Stack unwinding is implemented incorrectly in xtensa get_wchan: instead of extracting a0 and a1 registers from the spill location under the stack pointer it extracts a word pointed to by the stack pointer and subtracts 4 or 3 from it. Cc: stable@vger.kernel.org Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Bart Van Assche authored
commit d3d6a18d upstream. wake_up_locked() may but does not have to be called with interrupts disabled. Since the fuse filesystem calls wake_up_locked() without disabling interrupts aio_poll_wake() may be called with interrupts enabled. Since the kioctx.ctx_lock may be acquired from IRQ context, all code that acquires that lock from thread context must disable interrupts. Hence change the spin_trylock() call in aio_poll_wake() into a spin_trylock_irqsave() call. This patch fixes the following lockdep complaint: ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected 5.0.0-rc4-next-20190131 #23 Not tainted ----------------------------------------------------- syz-executor2/13779 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: 0000000098ac1230 (&fiq->waitq){+.+.}, at: spin_lock include/linux/spinlock.h:329 [inline] 0000000098ac1230 (&fiq->waitq){+.+.}, at: aio_poll fs/aio.c:1772 [inline] 0000000098ac1230 (&fiq->waitq){+.+.}, at: __io_submit_one fs/aio.c:1875 [inline] 0000000098ac1230 (&fiq->waitq){+.+.}, at: io_submit_one+0xedf/0x1cf0 fs/aio.c:1908 and this task is already holding: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:354 [inline] 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1771 [inline] 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one fs/aio.c:1875 [inline] 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: io_submit_one+0xeb6/0x1cf0 fs/aio.c:1908 which would create a new lock dependency: (&(&ctx->ctx_lock)->rlock){..-.} -> (&fiq->waitq){+.+.} but this new dependency connects a SOFTIRQ-irq-safe lock: (&(&ctx->ctx_lock)->rlock){..-.} ... which became SOFTIRQ-irq-safe at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160 spin_lock_irq include/linux/spinlock.h:354 [inline] free_ioctx_users+0x2d/0x4a0 fs/aio.c:610 percpu_ref_put_many include/linux/percpu-refcount.h:285 [inline] percpu_ref_put include/linux/percpu-refcount.h:301 [inline] percpu_ref_call_confirm_rcu lib/percpu-refcount.c:123 [inline] percpu_ref_switch_to_atomic_rcu+0x3e7/0x520 lib/percpu-refcount.c:158 __rcu_reclaim kernel/rcu/rcu.h:240 [inline] rcu_do_batch kernel/rcu/tree.c:2486 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2799 [inline] rcu_core+0x928/0x1390 kernel/rcu/tree.c:2780 __do_softirq+0x266/0x95a kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:654 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646 smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164 kthread+0x357/0x430 kernel/kthread.c:247 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 to a SOFTIRQ-irq-unsafe lock: (&fiq->waitq){+.+.} ... which became SOFTIRQ-irq-unsafe at: ... lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415 fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676 fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687 fuse_send_init fs/fuse/inode.c:989 [inline] fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214 mount_nodev+0x68/0x110 fs/super.c:1392 fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239 legacy_get_tree+0xf2/0x200 fs/fs_context.c:590 vfs_get_tree+0x123/0x450 fs/super.c:1481 do_new_mount fs/namespace.c:2610 [inline] do_mount+0x1436/0x2c40 fs/namespace.c:2932 ksys_mount+0xdb/0x150 fs/namespace.c:3148 __do_sys_mount fs/namespace.c:3162 [inline] __se_sys_mount fs/namespace.c:3159 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3159 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fiq->waitq); local_irq_disable(); lock(&(&ctx->ctx_lock)->rlock); lock(&fiq->waitq); <Interrupt> lock(&(&ctx->ctx_lock)->rlock); *** DEADLOCK *** 1 lock held by syz-executor2/13779: #0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: spin_lock_irq include/linux/spinlock.h:354 [inline] #0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: aio_poll fs/aio.c:1771 [inline] #0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: __io_submit_one fs/aio.c:1875 [inline] #0: 000000003c46111c (&(&ctx->ctx_lock)->rlock){..-.}, at: io_submit_one+0xeb6/0x1cf0 fs/aio.c:1908 the dependencies between SOFTIRQ-irq-safe lock and the holding lock: -> (&(&ctx->ctx_lock)->rlock){..-.} { IN-SOFTIRQ-W at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160 spin_lock_irq include/linux/spinlock.h:354 [inline] free_ioctx_users+0x2d/0x4a0 fs/aio.c:610 percpu_ref_put_many include/linux/percpu-refcount.h:285 [inline] percpu_ref_put include/linux/percpu-refcount.h:301 [inline] percpu_ref_call_confirm_rcu lib/percpu-refcount.c:123 [inline] percpu_ref_switch_to_atomic_rcu+0x3e7/0x520 lib/percpu-refcount.c:158 __rcu_reclaim kernel/rcu/rcu.h:240 [inline] rcu_do_batch kernel/rcu/tree.c:2486 [inline] invoke_rcu_callbacks kernel/rcu/tree.c:2799 [inline] rcu_core+0x928/0x1390 kernel/rcu/tree.c:2780 __do_softirq+0x266/0x95a kernel/softirq.c:292 run_ksoftirqd kernel/softirq.c:654 [inline] run_ksoftirqd+0x8e/0x110 kernel/softirq.c:646 smpboot_thread_fn+0x6ab/0xa10 kernel/smpboot.c:164 kthread+0x357/0x430 kernel/kthread.c:247 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 INITIAL USE at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock_irq include/linux/spinlock_api_smp.h:128 [inline] _raw_spin_lock_irq+0x60/0x80 kernel/locking/spinlock.c:160 spin_lock_irq include/linux/spinlock.h:354 [inline] __do_sys_io_cancel fs/aio.c:2052 [inline] __se_sys_io_cancel fs/aio.c:2035 [inline] __x64_sys_io_cancel+0xd5/0x5a0 fs/aio.c:2035 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe } ... key at: [<ffffffff8a574140>] __key.52370+0x0/0x40 ... acquired at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] aio_poll fs/aio.c:1772 [inline] __io_submit_one fs/aio.c:1875 [inline] io_submit_one+0xedf/0x1cf0 fs/aio.c:1908 __do_sys_io_submit fs/aio.c:1953 [inline] __se_sys_io_submit fs/aio.c:1923 [inline] __x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe the dependencies between the lock to be acquired and SOFTIRQ-irq-unsafe lock: -> (&fiq->waitq){+.+.} { HARDIRQ-ON-W at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415 fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676 fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687 fuse_send_init fs/fuse/inode.c:989 [inline] fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214 mount_nodev+0x68/0x110 fs/super.c:1392 fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239 legacy_get_tree+0xf2/0x200 fs/fs_context.c:590 vfs_get_tree+0x123/0x450 fs/super.c:1481 do_new_mount fs/namespace.c:2610 [inline] do_mount+0x1436/0x2c40 fs/namespace.c:2932 ksys_mount+0xdb/0x150 fs/namespace.c:3148 __do_sys_mount fs/namespace.c:3162 [inline] __se_sys_mount fs/namespace.c:3159 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3159 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe SOFTIRQ-ON-W at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415 fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676 fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687 fuse_send_init fs/fuse/inode.c:989 [inline] fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214 mount_nodev+0x68/0x110 fs/super.c:1392 fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239 legacy_get_tree+0xf2/0x200 fs/fs_context.c:590 vfs_get_tree+0x123/0x450 fs/super.c:1481 do_new_mount fs/namespace.c:2610 [inline] do_mount+0x1436/0x2c40 fs/namespace.c:2932 ksys_mount+0xdb/0x150 fs/namespace.c:3148 __do_sys_mount fs/namespace.c:3162 [inline] __se_sys_mount fs/namespace.c:3159 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3159 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe INITIAL USE at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] flush_bg_queue+0x1f3/0x3c0 fs/fuse/dev.c:415 fuse_request_queue_background+0x2d1/0x580 fs/fuse/dev.c:676 fuse_request_send_background+0x58/0x120 fs/fuse/dev.c:687 fuse_send_init fs/fuse/inode.c:989 [inline] fuse_fill_super+0x13bb/0x1730 fs/fuse/inode.c:1214 mount_nodev+0x68/0x110 fs/super.c:1392 fuse_mount+0x2d/0x40 fs/fuse/inode.c:1239 legacy_get_tree+0xf2/0x200 fs/fs_context.c:590 vfs_get_tree+0x123/0x450 fs/super.c:1481 do_new_mount fs/namespace.c:2610 [inline] do_mount+0x1436/0x2c40 fs/namespace.c:2932 ksys_mount+0xdb/0x150 fs/namespace.c:3148 __do_sys_mount fs/namespace.c:3162 [inline] __se_sys_mount fs/namespace.c:3159 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3159 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe } ... key at: [<ffffffff8a60dec0>] __key.43450+0x0/0x40 ... acquired at: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] aio_poll fs/aio.c:1772 [inline] __io_submit_one fs/aio.c:1875 [inline] io_submit_one+0xedf/0x1cf0 fs/aio.c:1908 __do_sys_io_submit fs/aio.c:1953 [inline] __se_sys_io_submit fs/aio.c:1923 [inline] __x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe stack backtrace: CPU: 0 PID: 13779 Comm: syz-executor2 Not tainted 5.0.0-rc4-next-20190131 #23 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_bad_irq_dependency kernel/locking/lockdep.c:1573 [inline] check_usage.cold+0x60f/0x940 kernel/locking/lockdep.c:1605 check_irq_usage kernel/locking/lockdep.c:1650 [inline] check_prev_add_irq kernel/locking/lockdep_states.h:8 [inline] check_prev_add kernel/locking/lockdep.c:1860 [inline] check_prevs_add kernel/locking/lockdep.c:1968 [inline] validate_chain kernel/locking/lockdep.c:2339 [inline] __lock_acquire+0x1f12/0x4790 kernel/locking/lockdep.c:3320 lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:3826 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2f/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] aio_poll fs/aio.c:1772 [inline] __io_submit_one fs/aio.c:1875 [inline] io_submit_one+0xedf/0x1cf0 fs/aio.c:1908 __do_sys_io_submit fs/aio.c:1953 [inline] __se_sys_io_submit fs/aio.c:1923 [inline] __x64_sys_io_submit+0x1bd/0x580 fs/aio.c:1923 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by:
Miklos Szeredi <miklos@szeredi.hu> [ bvanassche: added a comment ] Reluctantly-Acked-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Liu Xiang authored
commit 72faa7a7 upstream. The irq_pages is the number of pages for irq stack, but not the order which is needed by __get_free_pages(). We can use get_order() to calculate the accurate order. Signed-off-by:
Liu Xiang <liu.xiang6@zte.com.cn> Signed-off-by:
Paul Burton <paul.burton@mips.com> Fixes: fe8bd18f ("MIPS: Introduce irq_stack") Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v4.11+ Signed-off-by:
-
Gustavo A. R. Silva authored
commit d7ac3c6e upstream. IndexCard is indirectly controlled by user-space, hence leading to a potential exploitation of the Spectre variant 1 vulnerability. This issue was detected with the help of Smatch: drivers/char/applicom.c:418 ac_write() warn: potential spectre issue 'apbs' [r] drivers/char/applicom.c:728 ac_ioctl() warn: potential spectre issue 'apbs' [r] (local cap) Fix this by sanitizing IndexCard before using it to index apbs. Notice that given that speculation windows are large, the policy is to kill the speculation on the first load and not worry if it can be completed with a dependent load/store [1]. [1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/ Cc: stable@vger.kernel.org Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Balaji Manoharan authored
commit 8fde481e upstream. This fix enables USB role feature on intel commercial nuc platform which is based on Kabylake chipset. Signed-off-by:
Balaji Manoharan <m.balaji@intel.com> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Pavel Tikhomirov authored
commit 6a072128 upstream. Then tracing syscall exit event it is extremely useful to filter exit codes equal to some negative value, to react only to required errors. But negative numbers does not work: [root@snorch sys_exit_read]# echo "ret == -1" > filter bash: echo: write error: Invalid argument [root@snorch sys_exit_read]# cat filter ret == -1 ^ parse_error: Invalid value (did you forget quotes)? Similar thing happens when setting triggers. These is a regression in v4.17 introduced by the commit mentioned below, testing without these commit shows no problem with negative numbers. Link: http://lkml.kernel.org/r/20180823102534.7642-1-ptikhomirov@virtuozzo.com Cc: stable@vger.kernel.org Fixes: 80765597 ("tracing: Rewrite filter logic to be simpler and faster") Signed-off-by:
Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Kirill A. Shutemov authored
commit 6f913de3 upstream. EFI systems do not necessarily provide a legacy ROM. If the ROM is missing the memory is not mapped at all. Trying to dereference values in the legacy ROM area leads to a crash on Macbook Pro. Only look for values in the legacy ROM area for non-EFI system. Fixes: 3548e131 ("x86/boot/compressed/64: Find a place for 32-bit trampoline") Reported-by:
Pitam Mitra <pitamm@gmail.com> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Bockjoo Kim <bockjoo@phys.ufl.edu> Cc: bp@alien8.de Cc: hpa@zytor.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190219075224.35058-1-kirill.shutemov@linux.intel.com Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202351Signed-off-by:
-
Jiaxun Yang authored
commit 02371991 upstream. Some F17h models do not have CPB set in CPUID even though the CPU supports it. Set the feature bit unconditionally on all F17h. [ bp: Rewrite commit message and patch. ] Signed-off-by:
Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
Tom Lendacky <thomas.lendacky@amd.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Sherry Hurwitz <sherry.hurwitz@amd.com> Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181120030018.5185-1-jiaxun.yang@flygoat.comSigned-off-by:
-
Vlad Buslov authored
[ Upstream commit a3df633a ] Metadata pointer is only initialized for action TCA_TUNNEL_KEY_ACT_SET, but it is unconditionally dereferenced in tunnel_key_init() error handler. Verify that metadata pointer is not NULL before dereferencing it in tunnel_key_init error handling code. Fixes: ee28bb56 ("net/sched: fix memory leak in act_tunnel_key_init()") Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Reviewed-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 6191da98 ] when act_skbedit was converted to use RCU in the data plane, we added an error path, but we forgot to drop the action refcount in case of failure during a 'replace' operation: # tc actions add action skbedit ptype otherhost pass index 100 # tc action show action skbedit total acts 1 action order 0: skbedit ptype otherhost pass index 100 ref 1 bind 0 # tc actions replace action skbedit ptype otherhost drop index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action show action skbedit total acts 1 action order 0: skbedit ptype otherhost pass index 100 ref 2 bind 0 Ensure we call tcf_idr_release(), in case 'params_new' allocation failed, also when the action is being replaced. Fixes: c749cdda ("net/sched: act_skbedit: don't use spinlock in the data path") Signed-off-by:
-
Davide Caratti authored
[ Upstream commit 8f67c90e ] After commit 4e8ddd7f ("net: sched: don't release reference on action overwrite"), the error path of all actions was converted to drop refcount also when the action was being overwritten. But we forgot act_ipt_init(), in case allocation of 'tname' was not successful: # tc action add action xt -j LOG --log-prefix hello index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "hello" index 100 # tc action show action xt total acts 1 action order 0: tablename: mangle hook: NF_IP_POST_ROUTING target LOG level warning prefix "hello" index 100 ref 1 bind 0 # tc action replace action xt -j LOG --log-prefix world index 100 tablename: mangle hook: NF_IP_POST_ROUTING target: LOG level warning prefix "world" index 100 RTNETLINK answers: Cannot allocate memory We have an error talking to the kernel # tc action show action xt total acts 1 action order 0: tablename: mangle hook: NF_IP_POST_ROUTING target LOG level warning prefix "hello" index 100 ref 2 bind 0 Ensure we call tcf_idr_release(), in case 'tname' allocation failed, also when the action is being replaced. Fixes: 4e8ddd7f ("net: sched: don't release reference on action overwrite") Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit ed8fe202 ] When debugging another issue I faced an interrupt storm in this driver (88E6390, port 9 in SGMII mode), consisting of alternating link-up / link-down interrupts. Analysis showed that the driver wanted to set a cmode that was set already. But so far mv88e6390x_port_set_cmode() doesn't check this and powers down SERDES, what causes the link to break, and eventually results in the described interrupt storm. Fix this by checking whether the cmode actually changes. We want that the very first call to mv88e6390x_port_set_cmode() always configures the registers, therefore initialize port.cmode with a value that is different from any supported cmode value. We have to take care that we only init the ports cmode once chip->info->num_ports is set. v2: - add small helper and init the number of actual ports only Fixes: 364e9d77 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit d235c48b ] Upon setting the cmode on 6390 and 6390X, the associated serdes interfaces must be powered off/on. Both 6390X and 6390 share code to do so, but it currently uses the 6390 specific helper mv88e6390_serdes_power() to disable and enable the serdes interface. This call will fail silently on 6390X when trying so set a 10G interface such as XAUI or RXAUI, since mv88e6390_serdes_power() internally grabs the lane number based on modes supported by the 6390, and returns 0 when getting -ENODEV as a lane number. Using mv88e6390x_serdes_power() should be safe here, since we explicitly rule-out all ports but the 9 and 10, and because modes supported by 6390 ports 9 and 10 are a subset of those supported on 6390X. This was tested on 6390X using RXAUI mode. Fixes: 364e9d77 ("net: dsa: mv88e6xxx: Power on/off SERDES on cmode change") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
David Ahern authored
[ Upstream commit a1fd1ad2 ] ip_route_input_rcu expects the original ingress device (e.g., for proper multicast handling). The skb->dev can be changed by l3mdev_ip_rcv, so dev needs to be saved prior to calling it. This was the behavior prior to the listify changes. Fixes: 5fa12739 ("net: ipv4: listify ip_rcv_finish") Cc: Edward Cree <ecree@solarflare.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit be48220e ] MPLS does not support nexthops with an MPLS address family. Specifically, it does not handle RTA_GATEWAY attribute. Make it clear by returning an error. Fixes: 03c05665 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by:
-
David Ahern authored
[ Upstream commit e3818541 ] IPv6 currently does not support nexthops outside of the AF_INET6 family. Specifically, it does not handle RTA_VIA attribute. If it is passed in a route add request, the actual route added only uses the device which is clearly not what the user intended: $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0 $ ip ro ls ... 2001:db8:2::/64 dev eth0 metric 1024 pref medium Catch this and fail the route add: $ ip -6 ro add 2001:db8:2::/64 via inet 172.16.1.1 dev eth0 Error: IPv6 does not support RTA_VIA attribute. Fixes: 03c05665 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by:
-
David Ahern authored
[ Upstream commit b6e9e5df ] IPv4 currently does not support nexthops outside of the AF_INET family. Specifically, it does not handle RTA_VIA attribute. If it is passed in a route add request, the actual route added only uses the device which is clearly not what the user intended: $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0 $ ip ro ls ... 172.16.1.0/24 dev eth0 Catch this and fail the route add: $ ip ro add 172.16.1.0/24 via inet6 2001:db8:1::1 dev eth0 Error: IPv4 does not support RTA_VIA attribute. Fixes: 03c05665 ("mpls: Netlink commands to add, remove, and dump routes") Signed-off-by:
-
Nazarov Sergey authored
[ Upstream commit 3da1ed7a ] Extract IP options in cipso_v4_error and use __icmp_send. Signed-off-by:
Sergey Nazarov <s-nazarov@yandex.ru> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Nazarov Sergey authored
[ Upstream commit 9ef6b42a ] Add __icmp_send function having ip_options struct parameter Signed-off-by:
-
Timur Celik authored
[ Upstream commit ecef67cb ] Replace set_current_state with __set_current_state since no memory barrier is needed at this point. Signed-off-by:
Timur Celik <mail@timurcelik.de> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Igor Druzhinin authored
[ Upstream commit 99e87f56 ] Zero-copy callback flag is not yet set on frag list skb at the moment xenvif_handle_frag_list() returns -ENOMEM. This eventually results in leaking grant ref mappings since xenvif_zerocopy_callback() is never called for these fragments. Those eventually build up and cause Xen to kill Dom0 as the slots get reused for new mappings: "d0v0 Attempt to implicitly unmap a granted PTE c010000329fce005" That behavior is observed under certain workloads where sudden spikes of page cache writes coexist with active atomic skb allocations from network traffic. Additionally, rework the logic to deal with frag_list deallocation in a single place. Signed-off-by:
Paul Durrant <paul.durrant@citrix.com> Signed-off-by:
Igor Druzhinin <igor.druzhinin@citrix.com> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
-
Igor Druzhinin authored
[ Upstream commit a2288d4e ] Occasionally, during the disconnection procedure on XenBus which includes hash cache deinitialization there might be some packets still in-flight on other processors. Handling of these packets includes hashing and hash cache population that finally results in hash cache data structure corruption. In order to avoid this we prevent hashing of those packets if there are no queues initialized. In that case RCU protection of queues guards the hash cache as well. Signed-off-by:
-
Timur Celik authored
[ Upstream commit 71828b22 ] This patch moves setting of the current state into the loop. Otherwise the task may end up in a busy wait loop if none of the break conditions are met. Signed-off-by:
-
Tung Nguyen authored
[ Upstream commit bfd07f3d ] When sending multicast messages via blocking socket, if sending link is congested (tsk->cong_link_cnt is set to 1), the sending thread will be put into sleeping state. However, tipc_sk_filter_rcv() is called under socket spin lock but tipc_wait_for_cond() is not. So, there is no guarantee that the setting of tsk->cong_link_cnt to 0 in tipc_sk_proto_rcv() in CPU-1 will be perceived by CPU-0. If that is the case, the sending thread in CPU-0 after being waken up, will continue to see tsk->cong_link_cnt as 1 and put the sending thread into sleeping state again. The sending thread will sleep forever. CPU-0 | CPU-1 tipc_wait_for_cond() | { | // condition_ = !tsk->cong_link_cnt | while ((rc_ = !(condition_))) { | ... | release_sock(sk_); | wait_woken(); | | if (!sock_owned_by_user(sk)) | tipc_sk_filter_rcv() | { | ... | tipc_sk_proto_rcv() | { | ... | tsk->cong_link_cnt--; | ... | sk->sk_write_space(sk); | ... | } | ... | } sched_annotate_sleep(); | lock_sock(sk_); | remove_wait_queue(); | } | } | This commit fixes it by adding memory barrier to tipc_sk_proto_rcv() and tipc_wait_for_cond(). Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by:
-
Eric Biggers authored
[ Upstream commit ff7b11aa ] Commit 9060cb71 ("net: crypto set sk to NULL when af_alg_release.") fixed a use-after-free in sockfs_setattr() when an AF_ALG socket is closed concurrently with fchownat(). However, it ignored that many other proto_ops::release() methods don't set sock->sk to NULL and therefore allow the same use-after-free: - base_sock_release - bnep_sock_release - cmtp_sock_release - data_sock_release - dn_release - hci_sock_release - hidp_sock_release - iucv_sock_release - l2cap_sock_release - llcp_sock_release - llc_ui_release - rawsock_release - rfcomm_sock_release - sco_sock_release - svc_release - vcc_release - x25_release Rather than fixing all these and relying on every socket type to get this right forever, just make __sock_release() set sock->sk to NULL itself after calling proto_ops::release(). Reproducer that produces the KASAN splat when any of these socket types are configured into the kernel: #include <pthread.h> #include <stdlib.h> #include <sys/socket.h> #include <unistd.h> pthread_t t; volatile int fd; void *close_thread(void *arg) { for (;;) { usleep(rand() % 100); close(fd); } } int main() { pthread_create(&t, NULL, close_thread, NULL); for (;;) { fd = socket(rand() % 50, rand() % 11, 0); fchownat(fd, "", 1000, 1000, 0x1000); close(fd); } } Fixes: 86741ec2 ("net: core: Add a UID field to struct sock.") Signed-off-by:
Eric Biggers <ebiggers@google.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Mao Wenan authored
[ Upstream commit 07f12b26 ] If register_netdev() is failed to register sitn->fb_tunnel_dev, it will go to err_reg_dev and forget to free netdev(sitn->fb_tunnel_dev). BUG: memory leak unreferenced object 0xffff888378daad00 (size 512): comm "syz-executor.1", pid 4006, jiffies 4295121142 (age 16.115s) hex dump (first 32 bytes): 00 e6 ed c0 83 88 ff ff 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d6dcb63e>] kvmalloc include/linux/mm.h:577 [inline] [<00000000d6dcb63e>] kvzalloc include/linux/mm.h:585 [inline] [<00000000d6dcb63e>] netif_alloc_netdev_queues net/core/dev.c:8380 [inline] [<00000000d6dcb63e>] alloc_netdev_mqs+0x600/0xcc0 net/core/dev.c:8970 [<00000000867e172f>] sit_init_net+0x295/0xa40 net/ipv6/sit.c:1848 [<00000000871019fa>] ops_init+0xad/0x3e0 net/core/net_namespace.c:129 [<00000000319507f6>] setup_net+0x2ba/0x690 net/core/net_namespace.c:314 [<0000000087db4f96>] copy_net_ns+0x1dc/0x330 net/core/net_namespace.c:437 [<0000000057efc651>] create_new_namespaces+0x382/0x730 kernel/nsproxy.c:107 [<00000000676f83de>] copy_namespaces+0x2ed/0x3d0 kernel/nsproxy.c:165 [<0000000030b74bac>] copy_process.part.27+0x231e/0x6db0 kernel/fork.c:1919 [<00000000fff78746>] copy_process kernel/fork.c:1713 [inline] [<00000000fff78746>] _do_fork+0x1bc/0xe90 kernel/fork.c:2224 [<000000001c2e0d1c>] do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 [<00000000ec48bd44>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<0000000039acff8a>] 0xffffffffffffffff Signed-off-by:
Mao Wenan <maowenan@huawei.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit d25ed413 ] When debugging an issue I found implausible values in state->pause. Reason in that state->pause isn't initialized and later only single bits are changed. Also the struct itself isn't initialized in phylink_resolve(). So better initialize state->pause and other not yet initialized fields. v2: - use right function name in subject v3: - initialize additional fields Fixes: 9525ae83 ("phylink: add phylink infrastructure") Signed-off-by:
-
Rajasingh Thavamani authored
[ Upstream commit 232ba3a5 ] With Micrel KSZ8061 PHY, the link may occasionally not come up after Ethernet cable connect. The vendor's (Microchip, former Micrel) errata sheet 80000688A.pdf descripes the problem and possible workarounds in detail, see below. The batch implements workaround 1, which permanently fixes the issue. DESCRIPTION Link-up may not occur properly when the Ethernet cable is initially connected. This issue occurs more commonly when the cable is connected slowly, but it may occur any time a cable is connected. This issue occurs in the auto-negotiation circuit, and will not occur if auto-negotiation is disabled (which requires that the two link partners be set to the same speed and duplex). END USER IMPLICATIONS When this issue occurs, link is not established. Subsequent cable plug/unplaug cycle will not correct the issue. WORk AROUND There are four approaches to work around this issue: 1. This issue can be prevented by setting bit 15 in MMD device address 1, register 2, prior to connecting the cable or prior to setting the Restart Auto-negotiation bit in register 0h. The MMD registers are accessed via the indirect access registers Dh and Eh, or via the Micrel EthUtil utility as shown here: . if using the EthUtil utility (usually with a Micrel KSZ8061 Evaluation Board), type the following commands: > address 1 > mmd 1 > iw 2 b61a . Alternatively, write the following registers to write to the indirect MMD register: Write register Dh, data 0001h Write register Eh, data 0002h Write register Dh, data 4001h Write register Eh, data B61Ah 2. The issue can be avoided by disabling auto-negotiation in the KSZ8061, either by the strapping option, or by clearing bit 12 in register 0h. Care must be taken to ensure that the KSZ8061 and the link partner will link with the same speed and duplex. Note that the KSZ8061 defaults to full-duplex when auto-negotiation is off, but other devices may default to half-duplex in the event of failed auto-negotiation. 3. The issue can be avoided by connecting the cable prior to powering-up or resetting the KSZ8061, and leaving it plugged in thereafter. 4. If the above measures are not taken and the problem occurs, link can be recovered by setting the Restart Auto-Negotiation bit in register 0h, or by resetting or power cycling the device. Reset may be either hardware reset or software reset (register 0h, bit 15). PLAN This errata will not be corrected in the future revision. Fixes: 7ab59dc1 ("drivers/net/phy/micrel_phy: Add support for new PHYs") Signed-off-by:
Alexander Onnasch <alexander.onnasch@landisgyr.com> Signed-off-by:
Rajasingh Thavamani <T.Rajasingh@landisgyr.com> Reviewed-by:
-
YueHaibing authored
[ Upstream commit 58bdd544 ] KASAN report this: BUG: KASAN: null-ptr-deref in nfc_llcp_build_gb+0x37f/0x540 [nfc] Read of size 3 at addr 0000000000000000 by task syz-executor.0/5401 CPU: 0 PID: 5401 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xfa/0x1ce lib/dump_stack.c:113 kasan_report+0x171/0x18d mm/kasan/report.c:321 memcpy+0x1f/0x50 mm/kasan/common.c:130 nfc_llcp_build_gb+0x37f/0x540 [nfc] nfc_llcp_register_device+0x6eb/0xb50 [nfc] nfc_register_device+0x50/0x1d0 [nfc] nfcsim_device_new+0x394/0x67d [nfcsim] ? 0xffffffffc1080000 nfcsim_init+0x6b/0x1000 [nfcsim] do_one_initcall+0xfa/0x5ca init/main.c:887 do_init_module+0x204/0x5f6 kernel/module.c:3460 load_module+0x66b2/0x8570 kernel/module.c:3808 __do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902 do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f9cb79dcc58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000003 RBP: 00007f9cb79dcc70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9cb79dd6bc R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004 nfc_llcp_build_tlv will return NULL on fails, caller should check it, otherwise will trigger a NULL dereference. Reported-by:
Hulk Robot <hulkci@huawei.com> Fixes: eda21f16 ("NFC: Set MIU and RW values from CONNECT and CC LLCP frames") Fixes: d646960f ("NFC: Initial LLCP support") Signed-off-by:
-
Sheng Lan authored
[ Upstream commit 5845f706 ] It can be reproduced by following steps: 1. virtio_net NIC is configured with gso/tso on 2. configure nginx as http server with an index file bigger than 1M bytes 3. use tc netem to produce duplicate packets and delay: tc qdisc add dev eth0 root netem delay 100ms 10ms 30% duplicate 90% 4. continually curl the nginx http server to get index file on client 5. BUG_ON is seen quickly [10258690.371129] kernel BUG at net/core/skbuff.c:4028! [10258690.371748] invalid opcode: 0000 [#1] SMP PTI [10258690.372094] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W 5.0.0-rc6 #2 [10258690.372094] RSP: 0018:ffffa05797b43da0 EFLAGS: 00010202 [10258690.372094] RBP: 00000000000005ea R08: 0000000000000000 R09: 00000000000005ea [10258690.372094] R10: ffffa0579334d800 R11: 00000000000002c0 R12: 0000000000000002 [10258690.372094] R13: 0000000000000000 R14: ffffa05793122900 R15: ffffa0578f7cb028 [10258690.372094] FS: 0000000000000000(0000) GS:ffffa05797b40000(0000) knlGS:0000000000000000 [10258690.372094] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10258690.372094] CR2: 00007f1a6dc00868 CR3: 000000001000e000 CR4: 00000000000006e0 [10258690.372094] Call Trace: [10258690.372094] <IRQ> [10258690.372094] skb_to_sgvec+0x11/0x40 [10258690.372094] start_xmit+0x38c/0x520 [virtio_net] [10258690.372094] dev_hard_start_xmit+0x9b/0x200 [10258690.372094] sch_direct_xmit+0xff/0x260 [10258690.372094] __qdisc_run+0x15e/0x4e0 [10258690.372094] net_tx_action+0x137/0x210 [10258690.372094] __do_softirq+0xd6/0x2a9 [10258690.372094] irq_exit+0xde/0xf0 [10258690.372094] smp_apic_timer_interrupt+0x74/0x140 [10258690.372094] apic_timer_interrupt+0xf/0x20 [10258690.372094] </IRQ> In __skb_to_sgvec(), the skb->len is not equal to the sum of the skb's linear data size and nonlinear data size, thus BUG_ON triggered. Because the skb is cloned and a part of nonlinear data is split off. Duplicate packet is cloned in netem_enqueue() and may be delayed some time in qdisc. When qdisc len reached the limit and returns NET_XMIT_DROP, the skb will be retransmit later in write queue. the skb will be fragmented by tso_fragment(), the limit size that depends on cwnd and mss decrease, the skb's nonlinear data will be split off. The length of the skb cloned by netem will not be updated. When we use virtio_net NIC and invoke skb_to_sgvec(), the BUG_ON trigger. To fix it, netem returns NET_XMIT_SUCCESS to upper stack when it clones a duplicate packet. Fixes: 35d889d1 ("sch_netem: fix skb leak in netem_enqueue()") Signed-off-by:
Sheng Lan <lansheng@huawei.com> Reported-by:
Qin Ji <jiqin.ji@huawei.com> Suggested-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
