If promiscous mode setting fails, reset loopback mode setting in firmware.
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In fw reset path, we should consider any change in device state as an
ack from the other driver. When that happens, we don't have to wait for
an explicit ack.
Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

in func icmp6_dst_alloc,dst_metric_set call ipv6_cow_metrics to set metric.
ipv6_cow_metrics may will call rt6_bind_peer to set rt6_info->rt6i_peer.
So,we should move ipv6_addr_copy before dst_metric_set to make sure rt6_bind_peer success.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should return errcode from sock_alloc_send_skb()
Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the normal descriptor structure
to work fine on new GMAC Synopsys chips.

Normal descriptors were designed on the old MAC10/100
databook 1.91 where some bits were reserved: for example
the tx checksum insertion and rx checksum offload.

The patch maintains the back-compatibility with old
MAC devices (tested on STx7109 MAC10/100) and adds new
fields that actually new GMAC devices can use.

For example, STx7109 (MAC10/100) will pass from the platform
  tx_coe = 0, enh_desc = 0, has_gmac = 0.
A platform like Loongson1B (GMAC) will pass:
  tx_coe = 1, enh_desc = 0, has_gmac = 1.

Thanks to Kelvin, he enhanced the normal descriptors for
GMAC (on MIPS Loongson1B platform).
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Angus Clark <angus.clark@st.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch fixes a bug while checking the HW cap reg
on old MAC10/100 where this feature is not available.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow for MAC Address change of VF(SR-IOV case) on the fly- First add and then
delete MAC Address to allow for 'out of pool' errors.
When MAC Addr configured from a VM, the MAC on the NIC will aleady have
the supplied MAC,so just copy the supplied MAC to the netdev structure
before returning success to the stack
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Moved the .sge. field's population inside be_cmd_hdr_prepare.
Populating wrb->tag0 and tag1 inside be_cmd_hdr_prepare
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The FW includes the following fixes:
  1. (iSCSI) Arrival of un-solicited ASYNC message causes
     firmware to abort the connection with RST.
  2. (FCoE) There is a probability that truncated FCoE packet on
     RX path won't get detected which might lead to FW assert.
  3. (iSCSI) Arrival of target-initiated NOP-IN during intense
     ISCSI traffic might lead to FW assert.
  4. (iSCSI) Chip hangs when in case of retransmission not aligned
     to 4-bytes from the beginning of iSCSI PDU.
  5. (FCoE) Arrival of packets beyond task IO size can lead to crash.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a problem in which the host stops receiving data after
restarting the interface. This issue is caused by combination of incorrect
data path tap closure, along with missing MAC reset.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fix solves a problem of no link on 578xx-KR by retrying to link up to
four timer using the periodic function.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Adjust blink rate on 578xx to fit its clock rate.
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

commit 66b13d99 (ipv4: tcp: fix TOS value in ACK messages sent from
TIME_WAIT) fixed IPv4 only.

This part is for the IPv6 side, adding a tclass param to ip6_xmit()

We alias tw_tclass and tw_tos, if socket family is INET6.

[ if sockets is ipv4-mapped, only IP_TOS socket option is used to fill
TOS field, TCLASS is not taken into account ]
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'slab/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  tools, slub: Fix off-by-one buffer corruption after readlink() call
  slub: Discard slab page when node partial > minimum partial number
  slub: correct comments error for per cpu partial
  mm: restrict access to slab files under procfs and sysfs
  slub: Code optimization in get_partial_node()
  slub: doc: update the slabinfo.c file path
  slub: explicitly document position of inserting slab to partial list
  slub: update slabinfo tools to report per cpu partial list statistics
  slub: per cpu cache for partial pages
  slub: return object pointer from get_partial() / new_slab().
  slub: pass kmem_cache_cpu pointer to get_partial()
  slub: Prepare inuse field in new_slab()
  slub: Remove useless statements in __slab_alloc
  slub: free slabs without holding locks
  slub: use print_hex_dump
  slab: use print_hex_dump

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: irq: remove IRQF_DISABLED
  Blackfin: boards: clean up i2c_board_info
  Blackfin: drop unused Kconfig symbol
  Blackfin: bf537-stamp: register ASoC EVAL-ADAU1373 board driver
  Blackfin: bf537-stamp: Register adav801 codec and ASoC machine driver
  Blackfin: bf537-stamp: register adau1701 codec and asoc machine driver
  Blackfin: merge asm/mutex.h into kbuild too
  Blackfin: bf537-stamp: fix ad73311 codec config macro
  Blackfin: bf537-stamp: fix ad1836 name
  Blackfin: kgdb_test: rework code to avoid -O0 usage
  Blackfin: fix sparse warnings in copy_to/from_user
  Blackfin: bf548-ezkit: update defconfig
  Blackfin: SMP: fix scheduling deadlock
  Blackfin: H8606: fixup bogus ioresource init
  Blackfin: SMP: convert to common asm-generic/atomic.h

* 'for-linus' of git://neil.brown.name/md: (34 commits)
  md: Fix some bugs in recovery_disabled handling.
  md/raid5: fix bug that could result in reads from a failed device.
  lib/raid6: Fix filename emitted in generated code
  md.c: trivial comment fix
  MD: Allow restarting an interrupted incremental recovery.
  md: clear In_sync bit on devices added to an active array.
  md: add proper write-congestion reporting to RAID1 and RAID10.
  md: rename "mdk_personality" to "md_personality"
  md/bitmap remove fault injection options.
  md/raid5: typedef removal: raid5_conf_t -> struct r5conf
  md/raid1: typedef removal: conf_t -> struct r1conf
  md/raid10: typedef removal: conf_t -> struct r10conf
  md/raid0: typedef removal: raid0_conf_t -> struct r0conf
  md/multipath: typedef removal: multipath_conf_t -> struct mpconf
  md/linear: typedef removal: linear_conf_t -> struct linear_conf
  md/faulty: remove typedef: conf_t -> struct faulty_conf
  md/linear: remove typedefs: dev_info_t -> struct dev_info
  md: remove typedefs: mirror_info_t -> struct mirror_info
  md: remove typedefs: r10bio_t -> struct r10bio and r1bio_t -> struct r1bio
  md: remove typedefs: mdk_thread_t -> struct md_thread
  ...

* 'for-linus' of git://git.open-osd.org/linux-open-osd: (21 commits)
  ore: Enable RAID5 mounts
  exofs: Support for RAID5 read-4-write interface.
  ore: RAID5 Write
  ore: RAID5 read
  fs/Makefile: Always inspect exofs/
  ore: Make ore_calc_stripe_info EXPORT_SYMBOL
  ore/exofs: Change ore_check_io API
  ore/exofs: Define new ore_verify_layout
  ore: Support for partial component table
  ore: Support for short read/writes
  exofs: Support for short read/writes
  ore: Remove check for ios->kern_buff in _prepare_for_striping to later
  ore: cleanup: Embed an ore_striping_info inside ore_io_state
  ore: Only IO one group at a time (API change)
  ore/exofs: Change the type of the devices array (API change)
  ore: Make ore_striping_info and ore_calc_stripe_info public
  exofs: Remove unused data_map member from exofs_sb_info
  exofs: Rename struct ore_components comps => oc
  exofs/super.c: local functions should be static
  exofs/ore.c: local functions should be static
  ...

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64, unistd: Remove bogus __IGNORE_getcpu
  x86, mm, trivial: Remove unnecessary get_order() in free_thread_info()
  x86, cleanup: Remove unneeded version.h include from arch/x86/

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86-64: Fix CFI data for interrupt frames
  x86-64: Don't apply destructive erratum workaround on unaffected CPUs

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/irq: Standardize on CONFIG_SPARSE_IRQ=y
  x86, ioapic: Clean up ioapic/apic_id usage
  x86, ioapic: Factor out print_IO_APIC() to only print one io apic
  x86, ioapic: Print out irte with right ioapic index
  x86, ioapic: Split up setup_ioapic_entry()
  x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq()
  apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches

Mark Einon points out that the Kconfig option for NETDEV_1000 no longer
exists, and the merge of the staging drivers should have removed that
for the et131x driver.

And while checking for it, I noticed that slicoss had the same stale
dependency.  Remove that one too.
Reported-by: Mark Einon <mark.einon@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  time, s390: Get rid of compile warning
  dw_apb_timer: constify clocksource name
  time: Cleanup old CONFIG_GENERIC_TIME references that snuck in
  time: Change jiffies_to_clock_t() argument type to unsigned long
  alarmtimers: Fix error handling
  clocksource: Make watchdog reset lockless
  posix-cpu-timers: Cure SMP accounting oddities
  s390: Use direct ktime path for s390 clockevent device
  clockevents: Add direct ktime programming function
  clockevents: Make minimum delay adjustments configurable
  nohz: Remove "Switched to NOHz mode" debugging messages
  proc: Consider NO_HZ when printing idle and iowait times
  nohz: Make idle/iowait counter update conditional
  nohz: Fix update_ts_time_stat idle accounting
  cputime: Clean up cputime_to_usecs and usecs_to_cputime macros
  alarmtimers: Rework RTC device selection using class interface
  alarmtimers: Add try_to_cancel functionality
  alarmtimers: Add more refined alarm state tracking
  alarmtimers: Remove period from alarm structure
  alarmtimers: Remove interval cap limit hack
  ...

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
  llist: Add back llist_add_batch() and llist_del_first() prototypes
  sched: Don't use tasklist_lock for debug prints
  sched: Warn on rt throttling
  sched: Unify the ->cpus_allowed mask copy
  sched: Wrap scheduler p->cpus_allowed access
  sched: Request for idle balance during nohz idle load balance
  sched: Use resched IPI to kick off the nohz idle balance
  sched: Fix idle_cpu()
  llist: Remove cpu_relax() usage in cmpxchg loops
  sched: Convert to struct llist
  llist: Add llist_next()
  irq_work: Use llist in the struct irq_work logic
  llist: Return whether list is empty before adding in llist_add()
  llist: Move cpu_relax() to after the cmpxchg()
  llist: Remove the platform-dependent NMI checks
  llist: Make some llist functions inline
  sched, tracing: Show PREEMPT_ACTIVE state in trace_sched_switch
  sched: Remove redundant test in check_preempt_tick()
  sched: Add documentation for bandwidth control
  sched: Return unused runtime on group dequeue
  ...

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Fix insn decoder for longer instruction

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits)
  perf symbols: Increase symbol KSYM_NAME_LEN size
  perf hists browser: Refuse 'a' hotkey on non symbolic views
  perf ui browser: Use libslang to read keys
  perf tools: Fix tracing info recording
  perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads
  perf hists: Don't consider filtered entries when calculating column widths
  perf hists: Don't decay total_period for filtered entries
  perf hists browser: Honour symbol_conf.show_{nr_samples,total_period}
  perf hists browser: Do not exit on tab key with single event
  perf annotate browser: Don't change selection line when returning from callq
  perf tools: handle endianness of feature bitmap
  perf tools: Add prelink suggestion to dso update message
  perf script: Fix unknown feature comment
  perf hists browser: Apply the dso and thread filters when merging new batches
  perf hists: Move the dso and thread filters from hist_browser
  perf ui browser: Honour the xterm colors
  perf top tui: Give color hints just on the percentage, like on --stdio
  perf ui browser: Make the colors configurable and change the defaults
  perf tui: Remove unneeded call to newtCls on startup
  perf hists: Don't format the percentage on hist_entry__snprintf
  ...

Fix up conflicts in arch/x86/kernel/kprobes.c manually.

Ingo's tree did the insane "add volatile to const array", which just
doesn't make sense ("volatile const"?).  But we could remove the const
*and* make the array volatile to make doubly sure that gcc doesn't
optimize it away..

Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the
reader_lock has been turned into a raw lock by the core locking merge,
and there was a new user of it introduced in this perf core merge.  Make
sure that new use also uses the raw accessor functions.

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Add IRQF_RESUME_EARLY and resume such IRQs earlier
  genirq: Fix fatfinered fixup really
  genirq: percpu: allow interrupt type to be set at enable time
  genirq: Add support for per-cpu dev_id interrupts
  genirq: Add IRQCHIP_SKIP_SET_WAKE flag

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
  rcu: Move propagation of ->completed from rcu_start_gp() to rcu_report_qs_rsp()
  rcu: Remove rcu_needs_cpu_flush() to avoid false quiescent states
  rcu: Wire up RCU_BOOST_PRIO for rcutree
  rcu: Make rcu_torture_boost() exit loops at end of test
  rcu: Make rcu_torture_fqs() exit loops at end of test
  rcu: Permit rt_mutex_unlock() with irqs disabled
  rcu: Avoid having just-onlined CPU resched itself when RCU is idle
  rcu: Suppress NMI backtraces when stall ends before dump
  rcu: Prohibit grace periods during early boot
  rcu: Simplify unboosting checks
  rcu: Prevent early boot set_need_resched() from __rcu_pending()
  rcu: Dump local stack if cannot dump all CPUs' stacks
  rcu: Move __rcu_read_unlock()'s barrier() within if-statement
  rcu: Improve rcu_assign_pointer() and RCU_INIT_POINTER() documentation
  rcu: Make rcu_assign_pointer() unconditionally insert a memory barrier
  rcu: Make rcu_implicit_dynticks_qs() locals be correct size
  rcu: Eliminate in_irq() checks in rcu_enter_nohz()
  nohz: Remove nohz_cpu_mask
  rcu: Document interpretation of RCU-lockdep splats
  rcu: Allow rcutorture's stat_interval parameter to be changed at runtime
  ...

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
  rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock()
  lockdep: Comment all warnings
  lib: atomic64: Change the type of local lock to raw_spinlock_t
  locking, lib/atomic64: Annotate atomic64_lock::lock as raw
  locking, x86, iommu: Annotate qi->q_lock as raw
  locking, x86, iommu: Annotate irq_2_ir_lock as raw
  locking, x86, iommu: Annotate iommu->register_lock as raw
  locking, dma, ipu: Annotate bank_lock as raw
  locking, ARM: Annotate low level hw locks as raw
  locking, drivers/dca: Annotate dca_lock as raw
  locking, powerpc: Annotate uic->lock as raw
  locking, x86: mce: Annotate cmci_discover_lock as raw
  locking, ACPI: Annotate c3_lock as raw
  locking, oprofile: Annotate oprofilefs lock as raw
  locking, video: Annotate vga console lock as raw
  locking, latencytop: Annotate latency_lock as raw
  locking, timer_stats: Annotate table_lock as raw
  locking, rwsem: Annotate inner lock as raw
  locking, semaphores: Annotate inner lock as raw
  locking, sched: Annotate thread_group_cputimer as raw
  ...

Fix up conflicts in kernel/posix-cpu-timers.c manually: making
cputimer->cputime a raw lock conflicted with the ABBA fix in commit
bcd5cff7 ("cputimer: Cure lock inversion").

* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, ioapic: Consolidate the explicit EOI code
  x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq()
  x86, kdump, ioapic: Reset remote-IRR in clear_IO_APIC
  iommu: Rename the DMAR and INTR_REMAP config options
  x86, ioapic: Define irq_remap_modify_chip_defaults()
  x86, msi, intr-remap: Use the ioapic set affinity routine
  iommu: Cleanup ifdefs in detect_intel_iommu()
  iommu: No need to set dmar_disabled in check_zero_address()
  iommu: Move IOMMU specific code to intel-iommu.c
  intr_remap: Call dmar_dev_scope_init() explicitly
  x86, x2apic: Enable the bios request for x2apic optout

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  caif: Fix BUG() with network namespaces
  net: make bonding slaves honour master's skb->priority
  net: Unlock sock before calling sk_free()

* 'staging-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1519 commits)
  staging: et131x: Remove redundant check and return statement
  staging: et131x: Mainly whitespace changes to appease checkpatch
  staging: et131x: Remove last of the forward declarations
  staging: et131x: Remove even more forward declarations
  staging: et131x: Remove yet more forward declarations
  staging: et131x: Remove more forward declarations
  staging: et131x: Remove forward declaration of et131x_adapter_setup
  staging: et131x: Remove some forward declarations
  staging: et131x: Remove unused rx_ring.recv_packet_pool
  staging: et131x: Remove call to find pci pm capability
  staging: et131x: Remove redundant et131x_reset_recv() call
  staging: et131x: Remove unused rx_ring.recv_buffer_pool
  Staging: bcm: Fix three initialization errors in InterfaceDld.c
  Staging: bcm: Fix coding style issues in InterfaceDld.c
  staging:iio:dac: Add AD5360 driver
  staging:iio:trigger:bfin-timer: Fix compile error
  Staging: vt6655: add some range checks before memcpy()
  Staging: vt6655: whitespace fixes to iotcl.c
  Staging: vt6656: add some range checks before memcpy()
  Staging: vt6656: whitespace cleanups in ioctl.c
  ...

Fix up conflicts in:
 - drivers/{Kconfig,Makefile}, drivers/staging/{Kconfig,Makefile}:
	vg driver movement
 - drivers/staging/brcm80211/brcmfmac/{dhd_linux.c,mac80211_if.c}:
	driver removal vs now stale changes
 - drivers/staging/rtl8192e/r8192E_core.c:
	driver removal vs now stale changes
 - drivers/staging/et131x/et131*:
	driver consolidation into one file, tried to do fixups

* 'tty-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
  TTY: serial_core: Fix crash if DCD drop during suspend
  tty/serial: atmel_serial: bootconsole removed from auto-enumerates
  Revert "TTY: call tty_driver_lookup_tty unconditionally"
  tty/serial: atmel_serial: add device tree support
  tty/serial: atmel_serial: auto-enumerate ports
  tty/serial: atmel_serial: whitespace and braces modifications
  tty/serial: atmel_serial: change platform_data variable name
  tty/serial: RS485 bindings for device tree
  TTY: call tty_driver_lookup_tty unconditionally
  TTY: pty, release tty in all ptmx_open fail paths
  TTY: make tty_add_file non-failing
  TTY: drop driver reference in tty_open fail path
  8250_pci: Fix kernel panic when pch_uart is disabled
  h8300: drivers/serial/Kconfig was moved
  parport_pc: release IO region properly if unsupported ITE887x card is found
  tty: Support compat_ioctl get/set termios_locked
  hvc_console: display printk messages on console.
  TTY: snyclinkmp: forever loop in tx_load_dma_buffer()
  tty/n_gsm: avoid fifo overflow in gsm_dlci_data_output
  tty/n_gsm: fix a bug in gsm_dlci_data_output (adaption = 2 case)
  ...

Fix up Conflicts in:
 - drivers/tty/serial/8250_pci.c
	Trivial conflict with removed duplicate device ID
 - drivers/tty/serial/atmel_serial.c
	Annoying silly conflict between "specify the port num via
	platform_data" and other changes to atmel_console_init

Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (26 commits)
  hwmon: (w83627ehf) Better fix for negative temperature values
  hwmon: (w83627ehf) Uninline is_word_sized
  hwmon: (lm75) Document why clones are not detected
  hwmon: (w83627ehf) Move fan pins check to a separate function
  hwmon: (w83627ehf) Skip reading unused voltage registers
  hwmon: (lm75) Add support for Analog Devices ADT75
  hwmon: (pmbus_core) Simplify sign extensions
  hwmon: (pmbus) Add support for Lineage Power DC-DC converters
  hwmon: (pmbus/ltc2978) Add support for LTC3880 to LTC2978 driver
  hwmon: (pmbus/ltc2978) Explicit driver for LTC2978
  hwmon: (pmbus) Add support for TEMP2 peak attributes
  hwmon: AD7314 driver (ported from IIO)
  hwmon: (pmbus) Add support for Intersil power management chips
  hwmon: (pmbus) Always call _pmbus_read_byte in core driver
  hwmon: (pmbus) Replace EINVAL return codes with more appropriate errors
  hwmon: (pmbus) Provide more documentation
  hwmon/f71882fg: Make the decision wether to register fan attr. per fan
  hwmon/f71882fg: Add a f71882fg_create_fan_sysfs_files helper function
  hwmon/f71882fg: Make all fan/pwm attr tables 2 dimensional
  hwmon: (exynos4_tmu) Remove IRQF_DISABLED
  ...