- 07 Apr, 2014 40 commits
-
-
Oleg Nesterov authored
get_task_state() uses the most significant bit to report the state to user-space, this means that EXIT_ZOMBIE->EXIT_TRACE->EXIT_DEAD transition can be noticed via /proc as Z -> X -> Z change. Note that this was possible even before EXIT_TRACE was introduced. This is not really bad but imho it make sense to hide EXIT_TRACE from user-space completely. So the patch simply swaps EXIT_ZOMBIE and EXIT_DEAD, this way EXIT_TRACE will be seen as EXIT_ZOMBIE by user-space. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Michal Schmidt <mschmidt@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
Now that EXIT_DEAD is the terminal state it doesn't make sense to call eligible_child() or security_task_wait() if the task is really dead. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Lennart Poettering <lpoetter@redhat.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by:
-
Oleg Nesterov authored
wait_task_zombie() always uses EXIT_TRACE/ptrace_unlink() if ptrace_reparented(). This is suboptimal and a bit confusing: we do not need do_notify_parent(p) if !thread_group_leader(p) and in this case we also do not need ptrace_unlink(), we can rely on ptrace_release_task(). Change wait_task_zombie() to check thread_group_leader() along with ptrace_reparented() and simplify the final p->exit_state transition. Signed-off-by:
-
Oleg Nesterov authored
wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and drops tasklist_lock. If this task is not the natural child and it is traced, we change its state back to EXIT_ZOMBIE for ->real_parent. The last transition is racy, this is even documented in 50b8d257 "ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race". wait_consider_task() tries to detect this transition and clear ->notask_error but we can't rely on ptrace_reparented(), debugger can exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE. And there is another problem which were missed before: this transition can also race with reparent_leader() which doesn't reset >exit_signal if EXIT_DEAD, assuming that this task must be reaped by someone else. So the tracee can be re-parented with ->exit_signal != SIGCHLD, and if /sbin/init doesn't use __WALL it becomes unreapable. This was fixed by the previous commit, but it was the temporary hack. 1. Add the new exit_state, EXIT_TRACE. It means that the task is the traced zombie, debugger is going to detach and notify its natural parent. This new state is actually EXIT_ZOMBIE | EXIT_DEAD. This way we can avoid the changes in proc/kgdb code, get_task_state() still reports "X (dead)" in this case. Note: with or without this change userspace can see Z -> X -> Z transition. Not really bad, but probably makes sense to fix. 2. Change wait_task_zombie() to use EXIT_TRACE instead of EXIT_DEAD if we need to notify the ->real_parent. 3. Revert the previous hack in reparent_leader(), now that EXIT_DEAD is always the final state we can safely ignore such a task. 4. Change wait_consider_task() to check EXIT_TRACE separately and kill the racy and no longer needed ptrace_reparented() case. If ptrace == T an EXIT_TRACE thread should be simply ignored, the owner of this state is going to ptrace_unlink() this task. We can pretend that it was already removed from ->ptraced list. Otherwise we should skip this thread too but clear ->notask_error, we must be the natural parent and debugger is going to untrace and notify us. IOW, this doesn't differ from "EXIT_ZOMBIE && p->ptrace" even if the task was already untraced. Signed-off-by:
Jan Kratochvil <jan.kratochvil@redhat.com> Reported-by:
-
Oleg Nesterov authored
wait_task_zombie() first does EXIT_ZOMBIE->EXIT_DEAD transition and drops tasklist_lock. If this task is not the natural child and it is traced, we change its state back to EXIT_ZOMBIE for ->real_parent. The last transition is racy, this is even documented in 50b8d257 "ptrace: partially fix the do_wait(WEXITED) vs EXIT_DEAD->EXIT_ZOMBIE race". wait_consider_task() tries to detect this transition and clear ->notask_error but we can't rely on ptrace_reparented(), debugger can exit and do ptrace_unlink() before its sub-thread sets EXIT_ZOMBIE. And there is another problem which were missed before: this transition can also race with reparent_leader() which doesn't reset >exit_signal if EXIT_DEAD, assuming that this task must be reaped by someone else. So the tracee can be re-parented with ->exit_signal != SIGCHLD, and if /sbin/init doesn't use __WALL it becomes unreapable. Change reparent_leader() to update ->exit_signal even if EXIT_DEAD. Note: this is the simple temporary hack for -stable, it doesn't try to solve all problems, it will be reverted by the next changes. Signed-off-by:
-
Oleg Nesterov authored
Starting from commit c4ad8f98 ("execve: use 'struct filename *' for executable name passing") bprm->filename can not go away after flush_old_exec(), so we do not need to save the binary name in bprm->tcomm[] added by 96e02d15 ("exec: fix use-after-free bug in setup_new_exec()"). And there was never need for filename_to_taskname-like code, we can simply do set_task_comm(kbasename(filename). This patch has to change set_task_comm() and trace_task_rename() to accept "const char *", but I think this change is also good. Signed-off-by:
-
Djalal Harouni authored
The /proc/*/pagemap contain sensitive information and currently its mode is 0444. Change this to 0400, so the VFS will prevent unprivileged processes from getting file descriptors on arbitrary privileged /proc/*/pagemap files. This reduces the scope of address space leaking and bypasses by protecting already running processes. Signed-off-by:
Djalal Harouni <tixxdz@opendz.org> Acked-by:
Kees Cook <keescook@chromium.org> Acked-by:
Andy Lutomirski <luto@amacapital.net> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Djalal Harouni authored
These procfs files contain sensitive information and currently their mode is 0444. Change this to 0400, so the VFS will be able to block unprivileged processes from getting file descriptors on arbitrary privileged /proc/*/{stack,syscall,personality} files. This reduces the scope of ASLR leaking and bypasses by protecting already running processes. Signed-off-by: -
Monam Agarwal authored
Replace rcu_assign_pointer(x, NULL) with RCU_INIT_POINTER(x, NULL) The rcu_assign_pointer() ensures that the initialization of a structure is carried out before storing a pointer to that structure. And in the case of the NULL pointer, there is no structure to initialize. So, rcu_assign_pointer(p, NULL) can be safely converted to RCU_INIT_POINTER(p, NULL) Signed-off-by:
Monam Agarwal <monamagarwal123@gmail.com> Cc: "Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by:
-
Andrey Vagin authored
Currently we don't have a way how to determing from which mount point file has been opened. This information is required for proper dumping and restoring file descriptos due to presence of mount namespaces. It's possible, that two file descriptors are opened using the same paths, but one fd references mount point from one namespace while the other fd -- from other namespace. $ ls -l /proc/1/fd/1 lrwx------ 1 root root 64 Mar 19 23:54 /proc/1/fd/1 -> /dev/null $ cat /proc/1/fdinfo/1 pos: 0 flags: 0100002 mnt_id: 16 $ cat /proc/1/mountinfo | grep ^16 16 32 0:4 / /dev rw,nosuid shared:2 - devtmpfs devtmpfs rw,size=1013356k,nr_inodes=253339,mode=755 Signed-off-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Rob Landley <rob@landley.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Luiz Capitulino authored
It should read "reclaimable slab" and not "reclaimable swap". Signed-off-by:
Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Acked-by:
Rafael Aquini <aquini@redhat.com> Signed-off-by:
-
Guillaume Morin authored
The process events connector delivers a notification when a process exits. This is really convenient for a process that spawns and wants to monitor its children through an epoll-able() interface. Unfortunately, there is a small window between when the event is delivered and the child become wait()-able. This is creates a race if the parent wants to make sure that it knows about the exit, e.g pid_t pid = fork(); if (pid > 0) { register_interest_for_pid(pid); if (waitpid(pid, NULL, WNOHANG) > 0) { /* We might have raced with exit() */ } return; } /* Child */ execve(...) register_interest_for_pid() would be telling the the connector socket reader to pay attention to events related to pid. Though this is not a bug, I think it would make the connector a bit more usable if this race was closed by simply moving the call to proc_exit_connector() from just before exit_notify() to right after. Oleg said: : Even with this patch the code above is still "racy" if the child is : multi-threaded. Plus it should obviously filter-out subthreads. And : afaics there is no way to make it reliable, even if you change the code : above so that waitpid() is called only after the last thread exits WNOHANG : still can fail. Signed-off-by:Guillaume Morin <guillaume@morinfr.org> Cc: Matt Helsley <matt.helsley@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Oleg Nesterov authored
It is not clear why check_stack_usage() is called so early and thus it never checks the stack usage in, say, exit_notify() or flush_ptrace_hw_breakpoint() or other functions which are only called by do_exit(). Move the callsite down to the last preempt_disable/schedule. Signed-off-by:
-
Oleg Nesterov authored
Commit 8aac6270 ("move exit_task_namespaces() outside of exit_notify()") breaks pppd and the exiting service crashes the kernel: BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 IP: ppp_register_channel+0x13/0x20 [ppp_generic] Call Trace: ppp_asynctty_open+0x12b/0x170 [ppp_async] tty_ldisc_open.isra.2+0x27/0x60 tty_ldisc_hangup+0x1e3/0x220 __tty_hangup+0x2c4/0x440 disassociate_ctty+0x61/0x270 do_exit+0x7f2/0xa50 ppp_register_channel() needs ->net_ns and current->nsproxy == NULL. Move disassociate_ctty() before exit_task_namespaces(), it doesn't make sense to delay it after perf_event_exit_task() or cgroup_exit(). This also allows to use task_work_add() inside the (nontrivial) code paths in disassociate_ctty(). Investigated by Peter Hurley. Signed-off-by:
Sree Harsha Totakura <sreeharsha@totakura.in> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Sree Harsha Totakura <sreeharsha@totakura.in> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Andrey Vagin <avagin@openvz.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [v3.10+] Signed-off-by:
-
SeongJae Park authored
Fix following trivial checkpatch error: ERROR: return is not a function, parentheses are not required Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Acked-by:
Seth Jennings <sjennings@variantweb.net> Signed-off-by:
-
Minchan Kim authored
Cai Liu reporeted that now zbud pool pages counting has a problem when multiple swap is used because it just counts only one swap intead of all of swap so zswap cannot control writeback properly. The result is unnecessary writeback or no writeback when we should really writeback. IOW, it made zswap crazy. Another problem in zswap is: For example, let's assume we use two swap A and B with different priority and A already has charged 19% long time ago and let's assume that A swap is full now so VM start to use B so that B has charged 1% recently. It menas zswap charged (19% + 1%) is full by default. Then, if VM want to swap out more pages into B, zbud_reclaim_page would be evict one of pages in B's pool and it would be repeated continuously. It's totally LRU reverse problem and swap thrashing in B would happen. This patch makes zswap consider mutliple swap by creating *a* zbud pool which will be shared by multiple swap so all of zswap pages in multiple swap keep order by LRU so it can prevent above two problems. Signed-off-by:
Minchan Kim <minchan@kernel.org> Reported-by:
Cai Liu <cai.liu@samsung.com> Suggested-by:
Weijie Yang <weijie.yang.kh@gmail.com> Cc: Seth Jennings <sjennings@variantweb.net> Reviewed-by:
Bob Liu <bob.liu@oracle.com> Signed-off-by:
-
SeongJae Park authored
zswap used zsmalloc before and now using zbud. But, some comments saying it use zsmalloc yet. Fix the trivial problems. Signed-off-by:
-
SeongJae Park authored
Signed-off-by:
-
Joonsoo Kim authored
zram is ram based block device and can be used by backend of filesystem. When filesystem deletes a file, it normally doesn't do anything on data block of that file. It just marks on metadata of that file. This behavior has no problem on disk based block device, but has problems on ram based block device, since we can't free memory used for data block. To overcome this disadvantage, there is REQ_DISCARD functionality. If block device support REQ_DISCARD and filesystem is mounted with discard option, filesystem sends REQ_DISCARD to block device whenever some data blocks are discarded. All we have to do is to handle this request. This patch implements to flag up QUEUE_FLAG_DISCARD and handle this REQ_DISCARD request. With it, we can free memory used by zram if it isn't used. [akpm@linux-foundation.org: tweak comments] Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by:
-
Sergey Senozhatsky authored
sysfs.txt documentation lists the following requirements: - The buffer will always be PAGE_SIZE bytes in length. On i386, this is 4096. - show() methods should return the number of bytes printed into the buffer. This is the return value of scnprintf(). - show() should always use scnprintf(). Use scnprintf() in show() functions. Signed-off-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by:
-
Minchan Kim authored
When we initialized zcomp with single, we couldn't change max_comp_streams without zram reset but current interface doesn't show any error to user and even it changes max_comp_streams's value without any effect so it would make user very confusing. This patch prevents max_comp_streams's change when zcomp was initialized as single zcomp and emit the error to user(ex, echo). [akpm@linux-foundation.org: don't return with the lock held, per Sergey] [fengguang.wu@intel.com: fix coccinelle warnings] Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Sergey Senozhatsky authored
Instead of returning just NULL, return ERR_PTR from zcomp_create() if compressing backend creation has failed. ERR_PTR(-EINVAL) for unsupported compression algorithm request, ERR_PTR(-ENOMEM) for allocation (zcomp or compression stream) error. Perform IS_ERR() check of returned from zcomp_create() value in disksize_store() and set return code to PTR_ERR(). Change suggested by Jerome Marchand. [akpm@linux-foundation.org: clean up error recovery flow] Signed-off-by:
Jerome Marchand <jmarchan@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Sergey Senozhatsky authored
While fixing lockdep spew of ->init_lock reported by Sasha Levin [1], Minchan Kim noted [2] that it's better to move compression backend allocation (using GPF_KERNEL) out of the ->init_lock lock, same way as with zram_meta_alloc(), in order to prevent the same lockdep spew. [1] https://lkml.org/lkml/2014/2/27/337 [2] https://lkml.org/lkml/2014/3/3/32Signed-off-by:
-
Sergey Senozhatsky authored
Introduce LZ4 compression backend and make it available for selection. LZ4 support is optional and requires user to set ZRAM_LZ4_COMPRESS config option. The default compression backend is LZO. TEST (x86_64, core i5, 2 cores + 2 hyperthreading, zram disk size 1G, ext4 file system, 3 compression streams) iozone -t 3 -R -r 16K -s 60M -I +Z Test LZO LZ4 ---------------------------------------------- Initial write 1642744.62 1317005.09 Rewrite 2498980.88 1800645.16 Read 3957026.38 5877043.75 Re-read 3950997.38 5861847.00 Reverse Read 2937114.56 5047384.00 Stride read 2948163.19 4929587.38 Random read 3292692.69 4880793.62 Mixed workload 1545602.62 3502940.38 Random write 2448039.75 1758786.25 Pwrite 1670051.03 1338329.69 Pread 2530682.00 5097177.62 Fwrite 3232085.62 3275942.56 Fread 6306880.25 6645271.12 So on my system LZ4 is slower in write-only tests, while it performs better in read-only and mixed (reads + writes) tests. Official LZ4 benchmarks available here http://code.google.com/p/lz4/ (linux kernel uses revision r90). Signed-off-by: -
Sergey Senozhatsky authored
Add and document `comp_algorithm' device attribute. This attribute allows to show supported compression and currently selected compression algorithms: cat /sys/block/zram0/comp_algorithm [lzo] lz4 and change selected compression algorithm: echo lzo > /sys/block/zram0/comp_algorithm Signed-off-by:
-
Sergey Senozhatsky authored
This patch allows to change max_comp_streams on initialised zcomp. Introduce zcomp set_max_streams() knob, zcomp_strm_multi_set_max_streams() and zcomp_strm_single_set_max_streams() callbacks to change streams limit for zcomp_strm_multi and zcomp_strm_single, accordingly. set_max_streams for single steam zcomp does nothing. If user has lowered the limit, then zcomp_strm_multi_set_max_streams() attempts to immediately free extra streams (as much as it can, depending on idle streams availability). Note, this patch does not allow to change stream 'policy' from single to multi stream (or vice versa) on already initialised compression backend. Signed-off-by:
-
Sergey Senozhatsky authored
Existing zram (zcomp) implementation has only one compression stream (buffer and algorithm private part), so in order to prevent data corruption only one write (compress operation) can use this compression stream, forcing all concurrent write operations to wait for stream lock to be released. This patch changes zcomp to keep a compression streams list of user-defined size (via sysfs device attr). Each write operation still exclusively holds compression stream, the difference is that we can have N write operations (depending on size of streams list) executing in parallel. See TEST section later in commit message for performance data. Introduce struct zcomp_strm_multi and a set of functions to manage zcomp_strm stream access. zcomp_strm_multi has a list of idle zcomp_strm structs, spinlock to protect idle list and wait queue, making it possible to perform parallel compressions. The following set of functions added: - zcomp_strm_multi_find()/zcomp_strm_multi_release() find and release a compression stream, implement required locking - zcomp_strm_multi_create()/zcomp_strm_multi_destroy() create and destroy zcomp_strm_multi zcomp ->strm_find() and ->strm_release() callbacks are set during initialisation to zcomp_strm_multi_find()/zcomp_strm_multi_release() correspondingly. Each time zcomp issues a zcomp_strm_multi_find() call, the following set of operations performed: - spin lock strm_lock - if idle list is not empty, remove zcomp_strm from idle list, spin unlock and return zcomp stream pointer to caller - if idle list is empty, current adds itself to wait queue. it will be awaken by zcomp_strm_multi_release() caller. zcomp_strm_multi_release(): - spin lock strm_lock - add zcomp stream to idle list - spin unlock, wake up sleeper Minchan Kim reported that spinlock-based locking scheme has demonstrated a severe perfomance regression for single compression stream case, comparing to mutex-based (see https://lkml.org/lkml/2014/2/18/16) base spinlock mutex ==Initial write ==Initial write ==Initial write records: 5 records: 5 records: 5 avg: 1642424.35 avg: 699610.40 avg: 1655583.71 std: 39890.95(2.43%) std: 232014.19(33.16%) std: 52293.96 max: 1690170.94 max: 1163473.45 max: 1697164.75 min: 1568669.52 min: 573429.88 min: 1553410.23 ==Rewrite ==Rewrite ==Rewrite records: 5 records: 5 records: 5 avg: 1611775.39 avg: 501406.64 avg: 1684419.11 std: 17144.58(1.06%) std: 15354.41(3.06%) std: 18367.42 max: 1641800.95 max: 531356.78 max: 1706445.84 min: 1593515.27 min: 488817.78 min: 1655335.73 When only one compression stream available, mutex with spin on owner tends to perform much better than frequent wait_event()/wake_up(). This is why single stream implemented as a special case with mutex locking. Introduce and document zram device attribute max_comp_streams. This attr shows and stores current zcomp's max number of zcomp streams (max_strm). Extend zcomp's zcomp_create() with `max_strm' parameter. `max_strm' limits the number of zcomp_strm structs in compression backend's idle list (max_comp_streams). max_comp_streams used during initialisation as follows: -- passing to zcomp_create() max_strm equals to 1 will initialise zcomp using single compression stream zcomp_strm_single (mutex-based locking). -- passing to zcomp_create() max_strm greater than 1 will initialise zcomp using multi compression stream zcomp_strm_multi (spinlock-based locking). default max_comp_streams value is 1, meaning that zram with single stream will be initialised. Later patch will introduce configuration knob to change max_comp_streams on already initialised and used zcomp. TEST iozone -t 3 -R -r 16K -s 60M -I +Z test base 1 strm (mutex) 3 strm (spinlock) ----------------------------------------------------------------------- Initial write 589286.78 583518.39 718011.05 Rewrite 604837.97 596776.38 1515125.72 Random write 584120.11 595714.58 1388850.25 Pwrite 535731.17 541117.38 739295.27 Fwrite 1418083.88 1478612.72 1484927.06 Usage example: set max_comp_streams to 4 echo 4 > /sys/block/zram0/max_comp_streams show current max_comp_streams (default value is 1). cat /sys/block/zram0/max_comp_streams Signed-off-by:
-
Sergey Senozhatsky authored
This is preparation patch to add multi stream support to zcomp. Introduce struct zcomp_strm_single and a set of functions to manage zcomp_strm stream access. zcomp_strm_single implements single compession stream, same way as current zcomp implementation. This moves zcomp_strm stream control and locking from zcomp, so compressing backend zcomp is not aware of required locking. Single and multi streams require different locking schemes. Minchan Kim reported that spinlock-based locking scheme (which is used in multi stream implementation) has demonstrated a severe perfomance regression for single compression stream case, comparing to mutex-based. see https://lkml.org/lkml/2014/2/18/16 The following set of functions added: - zcomp_strm_single_find()/zcomp_strm_single_release() find and release a compression stream, implement required locking - zcomp_strm_single_create()/zcomp_strm_single_destroy() create and destroy zcomp_strm_single New ->strm_find() and ->strm_release() callbacks added to zcomp, which are set to zcomp_strm_single_find() and zcomp_strm_single_release() during initialisation. Instead of direct locking and zcomp_strm access from zcomp_strm_find() and zcomp_strm_release(), zcomp now calls ->strm_find() and ->strm_release() correspondingly. Signed-off-by:
-
Sergey Senozhatsky authored
Do not perform direct LZO compress/decompress calls, initialise and use zcomp LZO backend (single compression stream) instead. [akpm@linux-foundation.org: resolve conflicts with zram-delete-zram_init_device-fix.patch] Signed-off-by:
-
Sergey Senozhatsky authored
ZRAM performs direct LZO compression algorithm calls, making it the one and only option. While LZO is generally performs well, LZ4 algorithm tends to have a faster decompression (see http://code.google.com/p/lz4/ for full report) Name Ratio C.speed D.speed MB/s MB/s LZ4 (r101) 2.084 422 1820 LZO 2.06 2.106 414 600 Thus, users who have mostly read (decompress) usage scenarious or mixed workflow (writes with relatively high read ops number) will benefit from using LZ4 compression backend. Introduce compressing backend abstraction zcomp in order to support multiple compression algorithms with the following set of operations: .create .destroy .compress .decompress Schematically zram write() usually contains the following steps: 0) preparation (decompression of partioal IO, etc.) 1) lock buffer_lock mutex (protects meta compress buffers) 2) compress (using meta compress buffers) 3) alloc and map zs_pool object 4) copy compressed data (from meta compress buffers) to object allocated by 3) 5) free previous pool page, assign a new one 6) unlock buffer_lock mutex As we can see, compressing buffers must remain untouched from 1) to 4), because, otherwise, concurrent write() can overwrite data. At the same time, zram_meta must be aware of a) specific compression algorithm memory requirements and b) necessary locking to protect compression buffers. To remove requirement a) new struct zcomp_strm introduced, which contains a compress/decompress `buffer' and compression algorithm `private' part. While struct zcomp implements zcomp_strm stream handling and locking and removes requirement b) from zram meta. zcomp ->create() and ->destroy(), respectively, allocate and deallocate algorithm specific zcomp_strm `private' part. Every zcomp has zcomp stream and mutex to protect its compression stream. Stream usage semantics remains the same -- only one write can hold stream lock and use its buffers. zcomp_strm_find() turns caller into exclusive user of a stream (holding stream mutex until zram release stream), and zcomp_strm_release() makes zcomp stream available (unlock the stream mutex). Hence no concurrent write (compression) operations possible at the moment. iozone -t 3 -R -r 16K -s 60M -I +Z test base patched -------------------------------------------------- Initial write 597992.91 591660.58 Rewrite 609674.34 616054.97 Read 2404771.75 2452909.12 Re-read 2459216.81 2470074.44 Reverse Read 1652769.66 1589128.66 Stride read 2202441.81 2202173.31 Random read 2236311.47 2276565.31 Mixed workload 1423760.41 1709760.06 Random write 579584.08 615933.86 Pwrite 597550.02 594933.70 Pread 1703672.53 1718126.72 Fwrite 1330497.06 1461054.00 Fread 3922851.00 3957242.62 Usage examples: comp = zcomp_create(NAME) /* NAME e.g. "lzo" */ which initialises compressing backend if requested algorithm is supported. Compress: zstrm = zcomp_strm_find(comp) zcomp_compress(comp, zstrm, src, &dst_len) [..] /* copy compressed data */ zcomp_strm_release(comp, zstrm) Decompress: zcomp_decompress(comp, src, src_len, dst); Free compessing backend and its zcomp stream: zcomp_destroy(comp) Signed-off-by:
-
Sergey Senozhatsky authored
allocate new `zram_meta' in disksize_store() only for uninitialised zram device, saving a number of allocations and deallocations in case if disksize_store() was called on currently used device. at the same time zram_meta stack variable is not necessary, because we can set ->meta directly. there is also no need in setting QUEUE_FLAG_NONROT queue on every disksize_store(), set it once during device creation. [minchan@kernel.org: handle zram->meta alloc fail case] [minchan@kernel.org: prevent lockdep spew of init_lock] Signed-off-by:
-
Sergey Senozhatsky authored
Document `failed_reads' and `failed_writes' device attributes. Remove info about `discard' - there is no such zram attr. Signed-off-by:
-
Sergey Senozhatsky authored
Move zram warning about disksize and size of memory correlation to zram documentation. Signed-off-by:
-
Sergey Senozhatsky authored
struct table `count' member is not used. Signed-off-by:
-
Sergey Senozhatsky authored
zram accounted but did not report numbers of failed read and write queries. make these stats available as failed_reads and failed_writes attrs. Signed-off-by:
-
Sergey Senozhatsky authored
Introduce ZRAM_ATTR_RO macro that generates device_attribute and default ATTR show() function for existing atomic64_t zram stats. Signed-off-by:
-
Sergey Senozhatsky authored
This is a preparation patch for stats code duplication removal. 1) use atomic64_t for `pages_zero' and `pages_stored' zram stats. 2) `compr_size' and `pages_zero' struct zram_stats members did not follow the existing device attr naming scheme: zram_stats.ATTR has ATTR_show() function. rename them: -- compr_size -> compr_data_size -- pages_zero -> zero_pages Minchan Kim's note: If we really have trouble with atomic stat operation, we could change it with percpu_counter so that it could solve atomic overhead and unnecessary memory space by introducing unsigned long instead of 64bit atomic_t. Signed-off-by:
-
Sergey Senozhatsky authored
Remove `good' and `bad' compressed sub-requests stats. RW request may cause a number of RW sub-requests. zram used to account `good' compressed sub-queries (with compressed size less than 50% of original size), `bad' compressed sub-queries (with compressed size greater that 75% of original size), leaving sub-requests with compression size between 50% and 75% of original size not accounted and not reported. zram already accounts each sub-request's compression size so we can calculate real device compression ratio. Signed-off-by:
-
Sergey Senozhatsky authored
Do not pass rw argument down the __zram_make_request() -> zram_bvec_rw() chain, decode it in zram_bvec_rw() instead. Besides, this is the place where we distinguish READ and WRITE bio data directions, so account zram RW stats here, instead of __zram_make_request(). This also allows to account a real number of zram READ/WRITE operations, not just requests (single RW request may cause a number of zram RW ops with separate locking, compression/decompression, etc). Signed-off-by:
-
Sergey Senozhatsky authored
Introduce init_done() helper function which allows us to drop `init_done' struct zram member. init_done() uses the fact that ->init_done == 1 equals to ->meta != NULL. Signed-off-by:
-
