- 25 Apr, 2013 26 commits
-
-
Jussi Kivilinna authored
Signed-off-by:
Jussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Jussi Kivilinna authored
Signed-off-by:
-
Jussi Kivilinna authored
The Kconfig setting for glue helper module is CRYPTO_GLUE_HELPER_X86, but recent change for aesni_intel used CRYPTO_GLUE_HELPER instead. Patch corrects this issue. Cc: kbuild-all@01.org Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
Jussi Kivilinna authored
Add more optimized XTS code for aesni_intel in 64-bit mode, for smaller stack usage and boost for speed. tcrypt results, with Intel i5-2450M: 256-bit key enc dec 16B 0.98x 0.99x 64B 0.64x 0.63x 256B 1.29x 1.32x 1024B 1.54x 1.58x 8192B 1.57x 1.60x 512-bit key enc dec 16B 0.98x 0.99x 64B 0.60x 0.59x 256B 1.24x 1.25x 1024B 1.39x 1.42x 8192B 1.38x 1.42x I chose not to optimize smaller than block size of 256 bytes, since XTS is practically always used with data blocks of size 512 bytes. This is why performance is reduced in tcrypt for 64 byte long blocks. Cc: Huang Ying <ying.huang@intel.com> Signed-off-by: -
Jussi Kivilinna authored
Add more optimized XTS code for camellia-aesni-avx, for smaller stack usage and small boost for speed. tcrypt results, with Intel i5-2450M: enc dec 16B 1.10x 1.01x 64B 0.82x 0.77x 256B 1.14x 1.10x 1024B 1.17x 1.16x 8192B 1.10x 1.11x Since XTS is practically always used with data blocks of size 512 bytes or more, I chose to not make use of camellia-2way for block sized smaller than 256 bytes. This causes slower result in tcrypt for 64 bytes. Signed-off-by: -
Jussi Kivilinna authored
Change cast6-avx to use the new XTS code, for smaller stack usage and small boost to performance. tcrypt results, with Intel i5-2450M: enc dec 16B 1.01x 1.01x 64B 1.01x 1.00x 256B 1.09x 1.02x 1024B 1.08x 1.06x 8192B 1.08x 1.07x Signed-off-by: -
Jussi Kivilinna authored
Change twofish-avx to use the new XTS code, for smaller stack usage and small boost to performance. tcrypt results, with Intel i5-2450M: enc dec 16B 1.03x 1.02x 64B 0.91x 0.91x 256B 1.10x 1.09x 1024B 1.12x 1.11x 8192B 1.12x 1.11x Since XTS is practically always used with data blocks of size 512 bytes or more, I chose to not make use of twofish-3way for block sized smaller than 128 bytes. This causes slower result in tcrypt for 64 bytes. Signed-off-by: -
Jussi Kivilinna authored
This patch adds AVX optimized XTS-mode helper functions/macros and converts serpent-avx to use the new facilities. Benefits are slightly improved speed and reduced stack usage as use of temporary IV-array is avoided. tcrypt results, with Intel i5-2450M: enc dec 16B 1.00x 1.00x 64B 1.00x 1.00x 256B 1.04x 1.06x 1024B 1.09x 1.09x 8192B 1.10x 1.09x Signed-off-by: -
Jussi Kivilinna authored
Now that CryptoAPI has support for CMAC, we can add support for AES-CMAC-96 (rfc4494). Cc: Tom St Denis <tstdenis@elliptictech.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jussi Kivilinna authored
Patch adds support for NIST recommended block cipher mode CMAC to CryptoAPI. This work is based on Tom St Denis' earlier patch, http://marc.info/?l=linux-crypto-vger&m=135877306305466&w=2 Cc: Tom St Denis <tstdenis@elliptictech.com> Signed-off-by:
-
Jussi Kivilinna authored
Without these, kernel log shows: [ 5.984881] alg: No test for cipher_null (cipher_null-generic) [ 5.985096] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 5.985170] alg: No test for compress_null (compress_null-generic) [ 5.985297] alg: No test for digest_null (digest_null-generic) Signed-off-by:
-
Jussi Kivilinna authored
Signed-off-by:
-
Jussi Kivilinna authored
If the gcm cipher used by rfc4543 does not complete request immediately, the authentication tag is not copied to destination buffer. Patch adds correct async logic for this case. Signed-off-by:
-
Jussi Kivilinna authored
The GMAC code assumes that dst==src, which causes problems when trying to add rfc4543(gcm(aes)) test vectors. So fix this code to work when source and destination buffer are different. Signed-off-by:
-
Alexander Clouter authored
This patch allows timeriomem_rng to be used via devicetree. Signed-off-by:
Alexander Clouter <alex@digriz.org.uk> Signed-off-by:
-
Alexander Clouter authored
timeriomem_rng only supports a single device instance. This patch enables multiple timeriomem_rng devices to coexist as well as adds some additional error checking. Signed-off-by:
-
Sandy Wu authored
Occurs when CONFIG_CRYPTO_CRC32C_INTEL=y and CONFIG_CRYPTO_CRC32C_INTEL=y. Older versions of bintuils do not support the pclmulqdq instruction. The PCLMULQDQ gas macro is used instead. Signed-off-by:
Sandy Wu <sandyw@twitter.com> Cc: stable@vger.kernel.org # 3.8+ Signed-off-by:
-
Lubomir Rintel authored
This adds a driver for random number generator present on Broadcom BCM2835 SoC, used in Raspberry Pi and Roku 2 devices. Signed-off-by:
Dom Cobley <popcornmix@gmail.com> Signed-off-by:
Lubomir Rintel <lkundrak@v3.sk> Tested-by:
Stephen Warren <swarren@wwwdotorg.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Matt Mackall <mpm@selenic.com> Cc: linux-rpi-kernel@lists.infradead.org Signed-off-by:
-
Kim Phillips authored
checkstack reports report_deco_status(), report_ccb_status() as particularly excessive stack users. Move their lookup tables off the stack and put them in .rodata. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Kim Phillips authored
commit 2af8f4a2 "crypto: caam - coccicheck fixes" added error return values yet neglected to change the type from unsigned. Signed-off-by:
-
Tim Chen authored
crypto: sha512 - Create module providing optimized SHA512 routines using SSSE3, AVX or AVX2 instructions. We added glue code and config options to create crypto module that uses SSE/AVX/AVX2 optimized SHA512 x86_64 assembly routines. Signed-off-by:
Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by:
-
Tim Chen authored
Provides SHA512 x86_64 assembly routine optimized with SSE, AVX and AVX2's RORX instructions. Speedup of 70% or more has been measured over the generic implementation. Signed-off-by:
-
Tim Chen authored
Provides SHA512 x86_64 assembly routine optimized with SSE and AVX instructions. Speedup of 60% or more has been measured over the generic implementation. Signed-off-by:
-
Tim Chen authored
Provides SHA512 x86_64 assembly routine optimized with SSSE3 instructions. Speedup of 40% or more has been measured over the generic implementation. Signed-off-by:
-
Tim Chen authored
Other SHA512 routines may need to use the generic routine when FPU is not available. Signed-off-by:
-
Tim Chen authored
crypto: sha256 - Create module providing optimized SHA256 routines using SSSE3, AVX or AVX2 instructions. We added glue code and config options to create crypto module that uses SSE/AVX/AVX2 optimized SHA256 x86_64 assembly routines. Signed-off-by:
-
- 03 Apr, 2013 7 commits
-
-
Tim Chen authored
Provides SHA256 x86_64 assembly routine optimized with SSE, AVX and AVX2's RORX instructions. Speedup of 70% or more has been measured over the generic implementation. Signed-off-by:
-
Tim Chen authored
Provides SHA256 x86_64 assembly routine optimized with SSE and AVX instructions. Speedup of 60% or more has been measured over the generic implementation. Signed-off-by:
-
Tim Chen authored
Provides SHA256 x86_64 assembly routine optimized with SSSE3 instructions. Speedup of 40% or more has been measured over the generic implementation. Signed-off-by:
-
Tim Chen authored
Other SHA256 routine may need to use the generic routine when FPU is not available. Signed-off-by:
-
Jussi Kivilinna authored
These modules require AVX support in assembler, so add new check to Makefile for this. Other option would be to use CONFIG_AS_AVX inside source files, but that would result dummy/empty/no-fuctionality modules being created. Signed-off-by:
-
Jussi Kivilinna authored
Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
- 22 Mar, 2013 5 commits
-
-
Sachin Kamat authored
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Jamie Iles <jamie@jamieiles.com> Signed-off-by:
-
Fabio Estevam authored
Using devm_ioremap_resource() can make the code cleaner and simpler. Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
Vakul Garg authored
Following AEAD algo templates are updated for '.type' initialization. (a) authenc(hmac(sha224),cbc(aes)) (b) authenc(hmac(sha384),cbc(aes)) (c) authenc(hmac(sha224),cbc(des3_ede)) (d) authenc(hmac(sha384),cbc(des3_ede)) (e) authenc(hmac(sha224),cbc(des)) (f) authenc(hmac(sha384),cbc(des)) Signed-off-by:
Vakul Garg <vakul@freescale.com> Reviewed-by:
Andy Fleming <afleming@freescale.com> Signed-off-by:
-
Vakul Garg authored
This change is required for post SEC-5.0 devices which have RNG4. Setting RDB in security configuration register allows CAAM to use the "Random Data Buffer" to be filled by a single request. The Random Data Buffer is large enough for ten packets to get their IVs from a single request. If the Random Data Buffer is not enabled, then each IV causes a separate request, and RNG4 hardware cannot keep up resulting in lower IPSEC throughput if random IVs are used. Signed-off-by:
-
Jingoo Han authored
This patch adds CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. drivers/char/hw_random/exynos-rng.c:147:12: warning: 'exynos_rng_runtime_suspend' defined but not used [-Wunused-function] drivers/char/hw_random/exynos-rng.c:157:12: warning: 'exynos_rng_runtime_resume' defined but not used [-Wunused-function] Add CONFIG_PM_RUNTIME to suspend/resume functions to fix the build error. It is because UNIVERSAL_DEV_PM_OPS macro is related to both CONFIG_PM_SLEEP and CONFIG_PM_RUNTIME. drivers/char/hw_random/exynos-rng.c:167:8: error: 'exynos_rng_runtime_suspend' undeclared here (not in a function) drivers/char/hw_random/exynos-rng.c:167:8: error: 'exynos_rng_runtime_resume' undeclared here (not in a function) Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Reported-by:
David Rientjes <rientjes@google.com> Signed-off-by:
-
- 21 Mar, 2013 2 commits
-
-
Mihnea Dobrescu-Balaur authored
Signed-off-by:
Mihnea Dobrescu-Balaur <mihneadb@gmail.com> Signed-off-by:
-
Javier Martin authored
SAHARA2 HW module is included in the i.MX27 SoC from Freescale. It is capable of performing cipher algorithms such as AES, 3DES..., hashing and RNG too. This driver provides support for AES-CBC and AES-ECB by now. Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
