- 07 Aug, 2017 7 commits
-
-
Mikko Rapeli authored
These are defined in linux/types.h or drm/drm.h. Fixes user space compilation errors like: drm/armada_drm.h:26:2: error: unknown type name ‘uint32_t’ uint32_t handle; ^~~~~~~~ Signed-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Gabriel Laskar <gabriel@lse.epita.fr> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170806164428.2273-33-mikko.rapeli@iki.fi
-
Russell King authored
We don't need the CEC engine register definitions, so let's remove them. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20170802184108.7913-5-hverkuil@xs4all.nl
-
Russell King authored
Add a CEC driver for the dw-hdmi hardware. Reviewed-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Hans Verkuil authored
The __dw_hdmi_remove() function was missing a call to cec_notifier_put to balance the cec_notifier_get in the probe function. Signed-off-by:
-
Peter Rosin authored
Drivers no longer have any need for these callbacks, and there are no users. Zap. Zap-zap-zzzap-p-pp-p. Acked-by:
Peter Rosin <peda@axentia.se> Signed-off-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code that was not doing anything sensible anyway. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Kuninori Morimoto authored
This driver's Copyright is under Renesas Solutions Corp. This patch updates the year, because this driver was moved into synopsys folder in 2017. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
-
- 04 Aug, 2017 20 commits
-
-
Russell King authored
The video setup path aways sets the clock disable register to a specific value, which has the effect of disabling the CEC engine. When we add the CEC driver, this becomes a problem. Fix this by only setting/clearing the bits that the video path needs to. Reviewed-by:
Jose Abreu <joabreu@synopsys.com> Signed-off-by:
-
Russell King authored
Add CEC notifier support to the HDMI bridge driver, so that the CEC part of the IP can receive its physical address. Signed-off-by:
-
David Lechner authored
This removes the call to mipi_dbi_init() from mipi_dbi_spi_init() so that drivers can have a driver-specific implementation if needed. Suggested-by:
Noralf Trønnes <noralf@tronnes.org> Signed-off-by:
David Lechner <david@lechnology.com> Reviewed-by:
-
Noralf Trønnes authored
This driver can use the drm_driver.dumb_destroy and drm_driver.dumb_map_offset defaults, so no need to set them. Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Signed-off-by:
Stefan Agner <stefan@agner.ch> Link: https://patchwork.freedesktop.org/patch/msgid/1500837417-40580-8-git-send-email-noralf@tronnes.org
-
Peter Rosin authored
The redundant fb helper .load_lut is no longer used, and can not work right without also providing the fb helpers .gamma_set and .gamma_get thus rendering the code in this driver suspect. Just remove the dead code. Acked-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by:
-
Peter Rosin authored
The driver stores lut values from the fbdev interface, and is able to give them back, but does not appear to do anything with these lut values. The generic fb helpers have replaced this function, and may even have made the driver work for the C8 mode from the fbdev interface. But that is untested. Since the fb helpers .gamma_set and .gamma_get are obsolete, remove the dead code. Acked-by:
-
Peter Rosin authored
The redundant fb helpers .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by:
-
Peter Rosin authored
The redundant fb helpers .gamma_set and .gamma_get are no longer used. Remove the dead code. Acked-by:
-
Peter Rosin authored
The redundant fb helpers .load_lut, .gamma_set and .gamma_get are no longer used. Remove the dead code and hook up the crtc .gamma_set to use the crtc gamma_store directly instead of duplicating that info locally. Acked-by:
-
Mark yao authored
According to the kerneldoc[0], should do fbdev setup before calling drm_kms_helper_poll_init(), otherwise, Kms hotplug event may race into fbdev helper initial, and fb_helper->dev may be NULL pointer, that would cause the bug: [ 0.735411] [00000200] *pgd=00000000f6ffe003, *pud=00000000f6ffe003, *pmd=0000000000000000 [ 0.736156] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 0.736648] Modules linked in: [ 0.736930] CPU: 2 PID: 20 Comm: kworker/2:0 Not tainted 4.4.41 #20 [ 0.737480] Hardware name: Rockchip RK3399 Board rev2 (BOX) (DT) [ 0.738020] Workqueue: events cdn_dp_pd_event_work [ 0.738447] task: ffffffc0f21f3100 ti: ffffffc0f2218000 task.ti: ffffffc0f2218000 [ 0.739109] PC is at mutex_lock+0x14/0x44 [ 0.739469] LR is at drm_fb_helper_hotplug_event+0x30/0x114 [ 0.756253] [<ffffff8008a344f4>] mutex_lock+0x14/0x44 [ 0.756260] [<ffffff8008445708>] drm_fb_helper_hotplug_event+0x30/0x114 [ 0.756271] [<ffffff8008473c84>] rockchip_drm_output_poll_changed+0x18/0x20 [ 0.756280] [<ffffff8008439fcc>] drm_kms_helper_hotplug_event+0x28/0x34 [ 0.756286] [<ffffff800846c444>] cdn_dp_pd_event_work+0x394/0x3c4 [ 0.756295] [<ffffff80080b2b38>] process_one_work+0x218/0x3e0 [ 0.756302] [<ffffff80080b3538>] worker_thread+0x2e8/0x404 [ 0.756308] [<ffffff80080b7e70>] kthread+0xe8/0xf0 [ 0.756316] [<ffffff8008082690>] ret_from_fork+0x10/0x40 [0]: https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms-helpers.htmlSigned-off-by:
Mark Yao <mark.yao@rock-chips.com> Reviewed-by:
Sandy huang <sandy.huang@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/1501575103-20136-1-git-send-email-mark.yao@rock-chips.com
-
Mark yao authored
The user would be confused while facing a error commit without any error report. Signed-off-by:
-
Mark yao authored
VOP pitch register is word align, need align to word. VOP_WIN0_VIR: bit[31:16] win0_vir_stride_uv Number of words of Win0 uv Virtual width bit[15:0] win0_vir_width Number of words of Win0 yrgb Virtual width ARGB888 : win0_vir_width RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3) RGB565 : ceil(win0_vir_width/2) YUV : ceil(win0_vir_width/4) Signed-off-by: -
Mark yao authored
fixup the scale calculation formula on the case src_height == (dst_height/2). Signed-off-by:
-
Mark yao authored
Iommu would get page fault with following path: vop_disable: 1, disable all windows and set vop config done 2, vop enter to standy, all windows not works, but their registers are not clean, when you read window's enable bit, may found the window is enable. vop_enable: 1, memcpy(vop->regsbak, vop->regs, len) save current vop registers to vop->regsbak, then you can found window is enable on regsbak. 2, VOP_WIN_SET(vop, win, gate, 1); force enable window gate, but gate and enable are on same hardware register, then window enable bit rewrite to vop hardware. 3, vop power on, and vop might try to scan destroyed buffer, then iommu get page fault. Move windows disable after vop regsbak restore, then vop regsbak mechanism would keep tracing the modify, everything would be safe. Signed-off-by: -
Mark yao authored
Since atomic framework, crtc enable and disable are in pairs, no need to wait vblank. Signed-off-by:
-
- 03 Aug, 2017 4 commits
-
-
David Lechner authored
This adds a new drm_setup_crtcs_fb() function to handle the parts of drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When drm_setup_crtcs() is called during initialization, these fields are NULL because they have not been allocated yet. There is currently a hack at the end of drm_fb_helper_single_fb_probe() that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb() function. This is also done in preparation for addition setup that requires access to fb_helper->fbdev. Signed-off-by:
-
Cihangir Akturk authored
drm_*_reference() and drm_*_unreference() functions are just compatibility alias for drm_*_get() and drm_*_put() and should not be used by new code. So convert all users of compatibility functions to use the new APIs. Signed-off-by:
Cihangir Akturk <cakturk@gmail.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by:
-
Arvind Yadav authored
drm_plane_helper_funcs and drm_plane_funcsare not supposed to change at runtime. All functions working with drm_plane_helper_funcs and drm_plane_funcs work with const. So mark the non-const structs as const. File size before: text data bss dec hex filename 6072 596 0 6668 1a0c atmel_hlcdc_plane.o File size After adding 'const': text data bss dec hex filename 6218 436 0 6654 19fe atmel_hlcdc_plane.o Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
David Lechner authored
fb_crtc is used before a null check, so move the use after the null check. This was just identified by inspection. I haven't actually observed a crash here, so it is possible that the null check could be unnecessary. Signed-off-by:
-
- 01 Aug, 2017 6 commits
-
-
Ben Widawsky authored
Updated blob layout (Rob, Daniel, Kristian, xerpi) v2: * Removed __packed, and alignment (.+) * Fix indent in drm_format_modifier fields (Liviu) * Remove duplicated modifier > 64 check (Liviu) * Change comment about modifier (Liviu) * Remove arguments to blob creation, use plane instead (Liviu) * Fix data types (Ben) * Make the blob part of uapi (Daniel) v3: Remove unused ret field. Change i, and j to unsigned int (Emil) v4: Use plane->modifier_count instead of recounting (Daniel) v5: Rename modifiers to modifiers_property (Ville) Use sizeof(__u32) instead to reflect UAPI nature (Ville) Make BUILD_BUG_ON for blob header size Cc: Rob Clark <robdclark@gmail.com> Cc: Kristian H. Kristensen <hoegsberg@gmail.com> Signed-off-by:
Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Daniel Stone <daniels@collabora.com> (v2) Reviewed-by: Liviu Dudau <liviu@dudau.co.uk> (v2) Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> (v3) Signed-off-by:
Daniel Stone <daniels@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170724034641.13369-2-ben@bwidawsk.net
-
Ben Widawsky authored
This is the plumbing for supporting fb modifiers on planes. Modifiers have already been introduced to some extent, but this series will extend this to allow querying modifiers per plane. Based on this, the client to enable optimal modifications for framebuffers. This patch simply allows the DRM drivers to initialize their list of supported modifiers upon initializing the plane. v2: A minor addition from Daniel v3: * Updated commit message * s/INVALID/DRM_FORMAT_MOD_INVALID (Liviu) * Remove some excess newlines (Liviu) * Update comment for > 64 modifiers (Liviu) v4: Minor comment adjustments (Liviu) v5: Some new platforms added due to rebase v6: Add some missed plane inits (or maybe they're new - who knows at this point) (Daniel) Signed-off-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Maarten Lankhorst authored
for_each_obj_in_state is about to be removed, so convert to the new iterator macros. Just like in omap, use crtc_state->active instead of crtc_state->enable when waiting for completion. Changes since v1: - Fix compilation. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Rob Herring <robh@kernel.org> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: Sushmita Susheelendra <ssusheel@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Reviewed-by:
-
Maarten Lankhorst authored
Use the new atomic iterator macros, the old ones are about to be removed. With the new macros, it's more easy to get old and new state so get them from the macros instead of from obj->state. Changes since v1: - Don't mix up old and new state. (danvet) - Rebase on top of interruptible swap_state changes. Signed-off-by:
-
Maarten Lankhorst authored
Use the new iterator macro and look for crtc_state->active instead of enable, only crtc_state->active implies that vblanks will happen. Signed-off-by:
-
Maarten Lankhorst authored
for_each_obj_in_state is about to be removed, so use the correct new iterator macro. I renamed the variable to 'unused', but forgot to convert drm_atomic_helper_wait_for_flip_done to the new iterator macro, so make it work this time. Signed-off-by:
-
- 31 Jul, 2017 3 commits
-
-
Gustavo Padovan authored
If userspace already dropped its own reference by closing the sw_sync fence fd we might end up in a deadlock where dma_fence_is_signaled_locked() will trigger the release of the fence and thus try to hold the lock to remove the fence from the list. dma_fence_is_signaled_locked() tries to release/free the fence and hold the lock in the process. We fix that by changing the order operation and clean up the list and rb-tree first. v2: Drop fence get/put dance and manipulate the list first (Chris Wilson) Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20170729152217.8362-2-gustavo@padovan.org
-
Gustavo Padovan authored
We are going to use timeline_fence_signaled() in a internal function in the next commit. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Thierry Reding authored
RST uses underscores at the end of words to create crossreferences and it will accidentally try to link to tinydrm_ and drm_fb_ targets from the TODO, which is clearly not the intention in this context. Use backslashes to escape the special meaning of the underscore. Reviewed-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170731124259.7495-1-thierry.reding@gmail.com
-
