1. 26 Sep, 2012 1 commit
    • Paulo Zanoni's avatar
      drm/i915: make sure we write all the DIP data bytes · adf00b26
      Paulo Zanoni authored
      ... even if the actual infoframe is smaller than the maximum possible
      size.
      
      If we don't write all the 32 DIP data bytes the InfoFrame ECC may not
      be correctly calculated in some cases (e.g., when changing the port),
      and this will lead to black screens on HDMI monitors. The ECC value is
      generated by the hardware.
      
      I don't see how this should break anything since we're writing 0 and
      that should be the correct value, so this patch should be safe.
      
      Notice that on IVB and older we actually have 64 bytes available for
      VIDEO_DIP_DATA, but only bytes 0-31 actually store infoframe data: the
      others are either read-only ECC values or marked as "reserved". On HSW
      we only have 32 bytes, and the ECC value is stored on its own separate
      read-only register. See BSpec.
      
      This patch fixes bug #46761, which is marked as a regression
      introduced by commit 4e89ee17:
          drm/i915: set the DIP port on ibx_write_infoframe
      
      Before commit 4e89 we were just failing to send AVI infoframes when we
      needed to change the port, which can lead to black screens in some
      cases. After commit 4e89 we started sending infoframes, but with a
      possibly wrong ECC value. After this patch I hope we start sending
      correct infoframes.
      
      Version 2:
        - Improve commit message
        - Try to make the code more clear
      
      Cc: stable@vger.kernel.org
      Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=46761Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Reviewed-by: default avatarRodrigo Vivi <rodrigo.vivi@gmail.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      adf00b26
  2. 24 Sep, 2012 3 commits
    • Daniel Vetter's avatar
      Merge tag 'v3.6-rc7' into drm-intel-next-queued · 398b7a1b
      Daniel Vetter authored
      Manual backmerge of -rc7 to resolve a silent conflict leading to
      compile failure in drivers/gpu/drm/i915/intel_hdmi.c.
      
      This is due to the bugfix in -rc7:
      
      commit b98b6016
      Author: Wang Xingchao <xingchao.wang@intel.com>
      Date:   Thu Sep 13 07:43:22 2012 +0800
      
          drm/i915: HDMI - Clear Audio Enable bit for Hot Plug
      
      Since this code moved around a lot in -next git put that snippet at
      the wrong spot. I've tried to fix this by making the conflict explicit
      by merging a version for next with:
      
      commit 3cce574f
      Author: Wang Xingchao <xingchao.wang@intel.com>
      Date:   Thu Sep 13 11:19:00 2012 +0800
      
          drm/i915: HDMI - Clear Audio Enable bit for Hot Plug unconditionally
      
      But that failed to solve the entire problem. To avoid pushing out
      further -nightly branch to our QA where this is broken, do the
      backmerge and manually add the stuff git adds to -next from the patch
      in -fixes.
      
      Note that this doesn't show up in git's merge diff (and hence is also
      not handled by git rerere), which adds to the reasons why I'd like to
      fix this with a verbose backmerge. The git merge diff only shows a
      bunch of trivial conflicts of the "code changed in lines next to each
      another" kind.
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      398b7a1b
    • Paulo Zanoni's avatar
      drm/i915: BUG() on unexpected HDMI register · 57df2ae9
      Paulo Zanoni authored
      This should never happen, but the silent "return" makes me wonder
      every time I try to debug InfoFrame bugs, so promote this to BUG() to
      make sure people will complain if we ever break this.
      Signed-off-by: default avatarPaulo Zanoni <paulo.r.zanoni@intel.com>
      Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
      57df2ae9
    • Linus Torvalds's avatar
      Linux 3.6-rc7 · 979570e0
      Linus Torvalds authored
      979570e0
  3. 23 Sep, 2012 8 commits
    • Linus Torvalds's avatar
      Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild · 56bae802
      Linus Torvalds authored
      Pull kbuild fixes from Michal Marek:
       "There are two more kbuild fixes for 3.6.
      
        One fixes a race between x86's archscripts target and the rule
        (re)building scripts/basic/fixdep.  The second is a fix for the
        previous attempt at fixing make firmware_install with make 3.82.
        This new solution should work with any version of GNU make"
      
      * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
        x86/kbuild: archscripts depends on scripts_basic
        firmware: fix directory creation rule matching with make 3.80
      56bae802
    • Linus Torvalds's avatar
      Merge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging · 0737c8d7
      Linus Torvalds authored
      Pull hwmon subsystem fixes from Jean Delvare.
      
      * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
        hwmon: (fam15h_power) Tweak runavg_range on resume
        hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug
        hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug
      0737c8d7
    • Linus Torvalds's avatar
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 0bf7a705
      Linus Torvalds authored
      Pull SCSI fixes from James Bottomley:
       "This is a set of four essential fixes: two oops related (bnx2i,
        virtio-scsi), one data corruption related (hpsa) and one failure to
        boot due to interrupt routing issues (mpt2ss).
      
        Signed-off-by: James Bottomley <JBottomley@Parallels.com>"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        [SCSI] hpsa: fix handling of protocol error
        [SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA
        [SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload
        [SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list
      0bf7a705
    • Shaun Ruffell's avatar
      edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs. · faa2ad09
      Shaun Ruffell authored
      Fix potential NULL pointer dereference in edac_unregister_sysfs() on
      system boot introduced in 3.6-rc1.
      
      Since commit 7a623c03 ("edac: rewrite the sysfs code to use struct
      device") edac_mc_alloc() no longer initializes embedded kobjects in
      struct mem_ctl_info.  Therefore edac_mc_free() can no longer simply
      decrement a kobject reference count to free the allocated memory unless
      the memory controller driver module had also called edac_mc_add_mc().
      
      Now edac_mc_free() will check if the newly embedded struct device has
      been registered with sysfs before using either the standard device
      release functions or freeing the data structures itself with logic
      pulled out of the error path of edac_mc_alloc().
      
      The BUG this patch resolves for me:
      
        BUG: unable to handle kernel NULL pointer dereference at   (null)
        EIP is at __wake_up_common+0x1a/0x6a
        Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000)
        Call Trace:
          complete_all+0x3f/0x50
          device_pm_remove+0x23/0xa2
          device_del+0x34/0x142
          edac_unregister_sysfs+0x3b/0x5c [edac_core]
          edac_mc_free+0x29/0x2f [edac_core]
          e7xxx_probe1+0x268/0x311 [e7xxx_edac]
          e7xxx_init_one+0x56/0x61 [e7xxx_edac]
          local_pci_probe+0x13/0x15
        ...
      
      Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
      Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
      Signed-off-by: default avatarShaun Ruffell <sruffell@digium.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      faa2ad09
    • Fengguang Wu's avatar
      edac_mc: fix messy kfree calls in the error path · ef6e7816
      Fengguang Wu authored
      coccinelle warns about:
      
      + drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429
      
         421         if (mci->csrows) {
       > 422                 for (chn = 0; chn < tot_channels; chn++) {
         423                         csr = mci->csrows[chn];
         424                         if (csr) {
       > 425                                 for (chn = 0; chn < tot_channels; chn++)
         426                                          kfree(csr->channels[chn]);
         427                                  kfree(csr);
         428                          }
       > 429                          kfree(mci->csrows[i]);
         430                  }
         431                  kfree(mci->csrows);
         432          }
      
      and that code block seem to mess things up in several ways (double free, memory
      leak, out-of-bound reads etc.):
      
      L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be
            "row" and "tot_csrows" respectively. Which means either memory leak, or
            out-of-bound reads (which if does not trigger an immediate page fault
            error, will further lead to kfree() on random addresses).
      
      L425: The inner loop is reusing the same iterator "chn" as the outer loop,
            which could lead to premature end of the outer loop, and hence memory leak.
      
      L429: The array index 'i' in mci->csrows[i] is a temporary value used in
            previous loops, and won't change at all in the current loop. Which
            means either out-of-bound read and possibly kfree(random number), or the
            same mci->csrows[i] get freed once and again, and possibly double free
            for the kfree(csr) in L427.
      
      L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory.
      
      The buggy code was introduced by commit de3910eb ("edac: change the mem
      allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1
      merge window. Fix it by freeing up resources in this order:
      
        free csrows[i]->channels[j]
        free csrows[i]->channels
        free csrows[i]
        free csrows
      
      CC: Mauro Carvalho Chehab <mchehab@redhat.com>
      CC: Shaun Ruffell <sruffell@digium.com>
      Signed-off-by: default avatarFengguang Wu <fengguang.wu@intel.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ef6e7816
    • Andreas Herrmann's avatar
      hwmon: (fam15h_power) Tweak runavg_range on resume · 5f0ecb90
      Andreas Herrmann authored
      The quirk introduced with commit
      00250ec9 (hwmon: fam15h_power: fix
      bogus values with current BIOSes) is not only required during driver
      load but also when system resumes from suspend. The BIOS might set the
      previously recommended (but unsuitable) initilization value for the
      running average range register during resume.
      Signed-off-by: default avatarAndreas Herrmann <andreas.herrmann3@amd.com>
      Tested-by: default avatarAndreas Hartmann <andihartmann@01019freenet.de>
      Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      Cc: stable@vger.kernel.org # 3.0+
      5f0ecb90
    • Silas Boyd-Wickizer's avatar
      hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug · 641f1456
      Silas Boyd-Wickizer authored
      coretemp_init loops with for_each_online_cpu, adding platform_devices
      and sysfs interfaces, then calls register_hotcpu_notifier.  There is a
      race if a CPU is offlined or onlined after the loop, but before
      register_hotcpu_notifier.  The race might result in the absence of a
      platform_device+sysfs interface for an online CPU, or the presence of
      a platform_device+sysfs interface for an offline CPU.  A similar race
      occurs during coretemp_exit, after the module calls
      unregister_hotcpu_notifier, but before it unregisters all devices, a
      CPU might offline and a device for an offline CPU will exist for a
      short while.
      
      This fix surrounds for_each_online_cpu and register_hotcpu_notifier
      with get_online_cpus+put_online_cpus; and surrounds
      unregister_hotcpu_notifier and device unregistering with
      get_online_cpus+put_online_cpus.
      
      Build tested.
      Signed-off-by: default avatarSilas Boyd-Wickizer <sbw@mit.edu>
      Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      641f1456
    • Silas Boyd-Wickizer's avatar
      hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug · 1ec3ddfd
      Silas Boyd-Wickizer authored
      via_cputemp_init loops with for_each_online_cpu, adding
      platform_devices, then calls register_hotcpu_notifier.  If a CPU is
      offlined between the loop and register_hotcpu_notifier, then later
      onlined, via_cputemp_device_add will attempt to add platform devices
      with the same ID.  A similar race occurs during via_cputemp_exit,
      after the module calls unregister_hotcpu_notifier, a CPU might offline
      and a device will exist for a CPU that is offline.
      
      This fix surrounds for_each_online_cpu and register_hotcpu_notifier
      with get_online_cpus+put_online_cpus; and surrounds
      unregister_hotcpu_notifier and device unregistering with
      get_online_cpus+put_online_cpus.
      
      Build tested.
      Signed-off-by: default avatarSilas Boyd-Wickizer <sbw@mit.edu>
      Acked-by: default avatarHarald Welte <laforge@gnumonks.org>
      Signed-off-by: default avatarJean Delvare <khali@linux-fr.org>
      1ec3ddfd
  4. 22 Sep, 2012 6 commits
  5. 21 Sep, 2012 22 commits