1. 24 Jul, 2008 40 commits
    • Nye Liu's avatar
      cpm1: don't send break on TX_STOP, don't interrupt RX/TX when adjusting termios parameters · ae2d4c39
      Nye Liu authored
      Before setting STOP_TX, set _brkcr to 0 so the SMC does not send a break
      character.  The driver appears to properly re-initialize _brkcr when the
      SMC is restarted.
      
      Do not interrupt RX/TX when the termios is being adjusted; it results in
      corrupted characters appearing on the line.
      
      Cc: Vitaly Bordug <vbordug@ru.mvista.com>
      Cc: Scott Wood <scottwood@freescale.com>
      Cc: Paul Mackerras <paulus@samba.org>
      Cc: Kumar Gala <galak@kernel.crashing.org>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ae2d4c39
    • Maciej W. Rozycki's avatar
      serial: DZ11: avoid a hang at console switch-over · e9a8f4d1
      Maciej W. Rozycki authored
      Changes to the generic console support code that happened a while ago
      introduced a scenario where the initial console is used in parallel with
      the final console during a brief period when switching between the two is
      in progress.  During that time a message about the switch-over is printed.
      
      With some combinations of chips, firmware and drivers, such as the DEC
      DZ11 clone used with the DECstation, a hang may happen because the
      firmware used for the initial console may not expect the state of the chip
      after it has been initialised by the driver.
      
      This is a workaround for the DZ11 which reuses the power-management
      callback to keep the transmitter of the line associated with the console
      enabled.  It reflects the consensus reached in a discussion a while ago.
      Signed-off-by: default avatarMaciej W. Rozycki <macro@linux-mips.org>
      Cc: Jiri Slaby <jirislaby@gmail.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e9a8f4d1
    • Maciej W. Rozycki's avatar
      serial: Z85C30: avoid a hang at console switch-over · 37713591
      Maciej W. Rozycki authored
      Changes to the generic console support code that happened a while ago
      introduced a scenario where the initial console is used in parallel with
      the final console during a brief period when switching between the two is
      in progress.  During that time a message about the switch-over is printed.
      
      With some combinations of chips, firmware and drivers, such as the Zilog
      Z85C30 SCC used with the DECstation, a hang may happen because the
      firmware used for the initial console may not expect the state of the chip
      after it has been initialised by the driver.  This is not a bug in the
      firmware, as some registers it would have to examine are write-only.
      
      This is a workaround for the Z85C30 which reuses the power-management
      callback to keep the transmitter of the line associated with the console
      enabled.  It reflects the consensus reached in a discussion a while ago.
      Signed-off-by: default avatarMaciej W. Rozycki <macro@linux-mips.org>
      Cc: Jiri Slaby <jirislaby@gmail.com>
      Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      37713591
    • Catalin(ux) M BOIE's avatar
      serial: add support for a no-name 4 ports multiserial card · b76c5a07
      Catalin(ux) M BOIE authored
      It is a no-name PCI card.  I found no reference to a producer so I used
      "UNKNOWN_0x1584" as the name.
      
      Full lspci:
      01:07.0 0780: 10b5:9050 (rev 01)
              Subsystem: 10b5:1584
              Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- \
                      ParErr- Stepping- SERR+ FastB2B-
              Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- \
                      DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
              Interrupt: pin A routed to IRQ 10
              Region 1: I/O ports at ec00 [size=128]
              Region 2: I/O ports at e480 [size=32]
              Region 3: I/O ports at e400 [size=8]
              Capabilities: [40] Power Management version 1
                      Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA \
                              PME(D0+,D1-,D2-,D3hot+,D3cold-)
                      Status: D0 PME-Enable- DSel=0 DScale=0 PME-
              Capabilities: [48] #06 [0080]
              Capabilities: [4c] Vital Product Data
      
      After:
      0000:01:07.0: ttyS4 at I/O 0xe480 (irq = 10) is a 16550A
      0000:01:07.0: ttyS5 at I/O 0xe488 (irq = 10) is a 16550A
      0000:01:07.0: ttyS6 at I/O 0xe490 (irq = 10) is a 16550A
      0000:01:07.0: ttyS7 at I/O 0xe498 (irq = 10) is a 16550A
      Signed-off-by: default avatarCatalin(ux) M BOIE <catab@embedromix.ro>
      Acked-by: default avatarAlan Cox <alan@redhat.com>
      Acked-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b76c5a07
    • Aristeu Rozanski's avatar
      8250: fix break handling for Intel 82571 · 7500b1f6
      Aristeu Rozanski authored
      Intel 82571 has a "Serial Over LAN" feature that doesn't properly
      implements the receiving of break characters.  When a break is received,
      it doesn't set UART_LSR_DR and unless another character is received, the
      break won't be received by the application.
      Signed-off-by: default avatarAristeu Rozanski <arozansk@redhat.com>
      Acked-by: default avatarAlan Cox <alan@lxorguk.ukuu.org.uk>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7500b1f6
    • Adrian Bunk's avatar
      serial/8250_gsc.c: add MODULE_LICENSE · 920519c1
      Adrian Bunk authored
      This patch adds the missing MODULE_LICENSE("GPL").
      Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
      Acked-by: default avatarAlan Cox <alan@redhat.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      920519c1
    • Ulrich Drepper's avatar
      flag parameters add-on: remove epoll_create size param · 9fe5ad9c
      Ulrich Drepper authored
      Remove the size parameter from the new epoll_create syscall and renames the
      syscall itself.  The updated test program follows.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <time.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_epoll_create2
      # ifdef __x86_64__
      #  define __NR_epoll_create2 291
      # elif defined __i386__
      #  define __NR_epoll_create2 329
      # else
      #  error "need __NR_epoll_create2"
      # endif
      #endif
      
      #define EPOLL_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        int fd = syscall (__NR_epoll_create2, 0);
        if (fd == -1)
          {
            puts ("epoll_create2(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("epoll_create2(0) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_epoll_create2, EPOLL_CLOEXEC);
        if (fd == -1)
          {
            puts ("epoll_create2(EPOLL_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9fe5ad9c
    • Ulrich Drepper's avatar
      flag parameters: check magic constants · e38b36f3
      Ulrich Drepper authored
      This patch adds test that ensure the boundary conditions for the various
      constants introduced in the previous patches is met.  No code is generated.
      
      [akpm@linux-foundation.org: fix alpha]
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e38b36f3
    • Ulrich Drepper's avatar
      flag parameters: NONBLOCK in inotify_init · 510df2dd
      Ulrich Drepper authored
      This patch adds non-blocking support for inotify_init1.  The
      additional changes needed are minimal.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_inotify_init1
      # ifdef __x86_64__
      #  define __NR_inotify_init1 294
      # elif defined __i386__
      #  define __NR_inotify_init1 332
      # else
      #  error "need __NR_inotify_init1"
      # endif
      #endif
      
      #define IN_NONBLOCK O_NONBLOCK
      
      int
      main (void)
      {
        int fd = syscall (__NR_inotify_init1, 0);
        if (fd == -1)
          {
            puts ("inotify_init1(0) failed");
            return 1;
          }
        int fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (fl & O_NONBLOCK)
          {
            puts ("inotify_init1(0) set non-blocking mode");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_inotify_init1, IN_NONBLOCK);
        if (fd == -1)
          {
            puts ("inotify_init1(IN_NONBLOCK) failed");
            return 1;
          }
        fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((fl & O_NONBLOCK) == 0)
          {
            puts ("inotify_init1(IN_NONBLOCK) set non-blocking mode");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      510df2dd
    • Ulrich Drepper's avatar
      flag parameters: NONBLOCK in pipe · be61a86d
      Ulrich Drepper authored
      This patch adds O_NONBLOCK support to pipe2.  It is minimally more involved
      than the patches for eventfd et.al but still trivial.  The interfaces of the
      create_write_pipe and create_read_pipe helper functions were changed and the
      one other caller as well.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_pipe2
      # ifdef __x86_64__
      #  define __NR_pipe2 293
      # elif defined __i386__
      #  define __NR_pipe2 331
      # else
      #  error "need __NR_pipe2"
      # endif
      #endif
      
      int
      main (void)
      {
        int fds[2];
        if (syscall (__NR_pipe2, fds, 0) == -1)
          {
            puts ("pipe2(0) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            int fl = fcntl (fds[i], F_GETFL);
            if (fl == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if (fl & O_NONBLOCK)
              {
                printf ("pipe2(0) set non-blocking mode for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        if (syscall (__NR_pipe2, fds, O_NONBLOCK) == -1)
          {
            puts ("pipe2(O_NONBLOCK) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            int fl = fcntl (fds[i], F_GETFL);
            if (fl == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if ((fl & O_NONBLOCK) == 0)
              {
                printf ("pipe2(O_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      be61a86d
    • Ulrich Drepper's avatar
      flag parameters: NONBLOCK in timerfd_create · 6b1ef0e6
      Ulrich Drepper authored
      This patch adds support for the TFD_NONBLOCK flag to timerfd_create.  The
      additional changes needed are minimal.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <time.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_timerfd_create
      # ifdef __x86_64__
      #  define __NR_timerfd_create 283
      # elif defined __i386__
      #  define __NR_timerfd_create 322
      # else
      #  error "need __NR_timerfd_create"
      # endif
      #endif
      
      #define TFD_NONBLOCK O_NONBLOCK
      
      int
      main (void)
      {
        int fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, 0);
        if (fd == -1)
          {
            puts ("timerfd_create(0) failed");
            return 1;
          }
        int fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (fl & O_NONBLOCK)
          {
            puts ("timerfd_create(0) set non-blocking mode");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, TFD_NONBLOCK);
        if (fd == -1)
          {
            puts ("timerfd_create(TFD_NONBLOCK) failed");
            return 1;
          }
        fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((fl & O_NONBLOCK) == 0)
          {
            puts ("timerfd_create(TFD_NONBLOCK) set non-blocking mode");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6b1ef0e6
    • Ulrich Drepper's avatar
      flag parameters: NONBLOCK in eventfd · e7d476df
      Ulrich Drepper authored
      This patch adds support for the EFD_NONBLOCK flag to eventfd2.  The
      additional changes needed are minimal.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_eventfd2
      # ifdef __x86_64__
      #  define __NR_eventfd2 290
      # elif defined __i386__
      #  define __NR_eventfd2 328
      # else
      #  error "need __NR_eventfd2"
      # endif
      #endif
      
      #define EFD_NONBLOCK O_NONBLOCK
      
      int
      main (void)
      {
        int fd = syscall (__NR_eventfd2, 1, 0);
        if (fd == -1)
          {
            puts ("eventfd2(0) failed");
            return 1;
          }
        int fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (fl & O_NONBLOCK)
          {
            puts ("eventfd2(0) sets non-blocking mode");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_eventfd2, 1, EFD_NONBLOCK);
        if (fd == -1)
          {
            puts ("eventfd2(EFD_NONBLOCK) failed");
            return 1;
          }
        fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((fl & O_NONBLOCK) == 0)
          {
            puts ("eventfd2(EFD_NONBLOCK) does not set non-blocking mode");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      e7d476df
    • Ulrich Drepper's avatar
      flag parameters: NONBLOCK in signalfd · 5fb5e049
      Ulrich Drepper authored
      This patch adds support for the SFD_NONBLOCK flag to signalfd4.  The
      additional changes needed are minimal.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <signal.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_signalfd4
      # ifdef __x86_64__
      #  define __NR_signalfd4 289
      # elif defined __i386__
      #  define __NR_signalfd4 327
      # else
      #  error "need __NR_signalfd4"
      # endif
      #endif
      
      #define SFD_NONBLOCK O_NONBLOCK
      
      int
      main (void)
      {
        sigset_t ss;
        sigemptyset (&ss);
        sigaddset (&ss, SIGUSR1);
        int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
        if (fd == -1)
          {
            puts ("signalfd4(0) failed");
            return 1;
          }
        int fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (fl & O_NONBLOCK)
          {
            puts ("signalfd4(0) set non-blocking mode");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_NONBLOCK);
        if (fd == -1)
          {
            puts ("signalfd4(SFD_NONBLOCK) failed");
            return 1;
          }
        fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((fl & O_NONBLOCK) == 0)
          {
            puts ("signalfd4(SFD_NONBLOCK) does not set non-blocking mode");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      5fb5e049
    • Ulrich Drepper's avatar
      flag parameters: NONBLOCK in socket and socketpair · 77d27200
      Ulrich Drepper authored
      This patch introduces support for the SOCK_NONBLOCK flag in socket,
      socketpair, and  paccept.  To do this the internal function sock_attach_fd
      gets an additional parameter which it uses to set the appropriate flag for
      the file descriptor.
      
      Given that in modern, scalable programs almost all socket connections are
      non-blocking and the minimal additional cost for the new functionality
      I see no reason not to add this code.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <pthread.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <netinet/in.h>
      #include <sys/socket.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_paccept
      # ifdef __x86_64__
      #  define __NR_paccept 288
      # elif defined __i386__
      #  define SYS_PACCEPT 18
      #  define USE_SOCKETCALL 1
      # else
      #  error "need __NR_paccept"
      # endif
      #endif
      
      #ifdef USE_SOCKETCALL
      # define paccept(fd, addr, addrlen, mask, flags) \
        ({ long args[6] = { \
             (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
           syscall (__NR_socketcall, SYS_PACCEPT, args); })
      #else
      # define paccept(fd, addr, addrlen, mask, flags) \
        syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
      #endif
      
      #define PORT 57392
      
      #define SOCK_NONBLOCK O_NONBLOCK
      
      static pthread_barrier_t b;
      
      static void *
      tf (void *arg)
      {
        pthread_barrier_wait (&b);
        int s = socket (AF_INET, SOCK_STREAM, 0);
        struct sockaddr_in sin;
        sin.sin_family = AF_INET;
        sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
        sin.sin_port = htons (PORT);
        connect (s, (const struct sockaddr *) &sin, sizeof (sin));
        close (s);
        pthread_barrier_wait (&b);
      
        pthread_barrier_wait (&b);
        s = socket (AF_INET, SOCK_STREAM, 0);
        sin.sin_port = htons (PORT);
        connect (s, (const struct sockaddr *) &sin, sizeof (sin));
        close (s);
        pthread_barrier_wait (&b);
      
        return NULL;
      }
      
      int
      main (void)
      {
        int fd;
        fd = socket (PF_INET, SOCK_STREAM, 0);
        if (fd == -1)
          {
            puts ("socket(0) failed");
            return 1;
          }
        int fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (fl & O_NONBLOCK)
          {
            puts ("socket(0) set non-blocking mode");
            return 1;
          }
        close (fd);
      
        fd = socket (PF_INET, SOCK_STREAM|SOCK_NONBLOCK, 0);
        if (fd == -1)
          {
            puts ("socket(SOCK_NONBLOCK) failed");
            return 1;
          }
        fl = fcntl (fd, F_GETFL);
        if (fl == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((fl & O_NONBLOCK) == 0)
          {
            puts ("socket(SOCK_NONBLOCK) does not set non-blocking mode");
            return 1;
          }
        close (fd);
      
        int fds[2];
        if (socketpair (PF_UNIX, SOCK_STREAM, 0, fds) == -1)
          {
            puts ("socketpair(0) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            fl = fcntl (fds[i], F_GETFL);
            if (fl == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if (fl & O_NONBLOCK)
              {
                printf ("socketpair(0) set non-blocking mode for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        if (socketpair (PF_UNIX, SOCK_STREAM|SOCK_NONBLOCK, 0, fds) == -1)
          {
            puts ("socketpair(SOCK_NONBLOCK) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            fl = fcntl (fds[i], F_GETFL);
            if (fl == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if ((fl & O_NONBLOCK) == 0)
              {
                printf ("socketpair(SOCK_NONBLOCK) does not set non-blocking mode for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        pthread_barrier_init (&b, NULL, 2);
      
        struct sockaddr_in sin;
        pthread_t th;
        if (pthread_create (&th, NULL, tf, NULL) != 0)
          {
            puts ("pthread_create failed");
            return 1;
          }
      
        int s = socket (AF_INET, SOCK_STREAM, 0);
        int reuse = 1;
        setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
        sin.sin_family = AF_INET;
        sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
        sin.sin_port = htons (PORT);
        bind (s, (struct sockaddr *) &sin, sizeof (sin));
        listen (s, SOMAXCONN);
      
        pthread_barrier_wait (&b);
      
        int s2 = paccept (s, NULL, 0, NULL, 0);
        if (s2 < 0)
          {
            puts ("paccept(0) failed");
            return 1;
          }
      
        fl = fcntl (s2, F_GETFL);
        if (fl & O_NONBLOCK)
          {
            puts ("paccept(0) set non-blocking mode");
            return 1;
          }
        close (s2);
        close (s);
      
        pthread_barrier_wait (&b);
      
        s = socket (AF_INET, SOCK_STREAM, 0);
        sin.sin_port = htons (PORT);
        setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
        bind (s, (struct sockaddr *) &sin, sizeof (sin));
        listen (s, SOMAXCONN);
      
        pthread_barrier_wait (&b);
      
        s2 = paccept (s, NULL, 0, NULL, SOCK_NONBLOCK);
        if (s2 < 0)
          {
            puts ("paccept(SOCK_NONBLOCK) failed");
            return 1;
          }
      
        fl = fcntl (s2, F_GETFL);
        if ((fl & O_NONBLOCK) == 0)
          {
            puts ("paccept(SOCK_NONBLOCK) does not set non-blocking mode");
            return 1;
          }
        close (s2);
        close (s);
      
        pthread_barrier_wait (&b);
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      77d27200
    • Ulrich Drepper's avatar
      flag parameters: NONBLOCK in anon_inode_getfd · 99829b83
      Ulrich Drepper authored
      Building on the previous change to anon_inode_getfd, this patch introduces
      support for handling of O_NONBLOCK in addition to the already supported
      O_CLOEXEC.  Following patches will take advantage of this support.  As can be
      seen, the additional support for supporting this functionality is minimal.
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      99829b83
    • Ulrich Drepper's avatar
      flag parameters: inotify_init · 4006553b
      Ulrich Drepper authored
      This patch introduces the new syscall inotify_init1 (note: the 1 stands for
      the one parameter the syscall takes, as opposed to no parameter before).  The
      values accepted for this parameter are function-specific and defined in the
      inotify.h header.  Here the values must match the O_* flags, though.  In this
      patch CLOEXEC support is introduced.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_inotify_init1
      # ifdef __x86_64__
      #  define __NR_inotify_init1 294
      # elif defined __i386__
      #  define __NR_inotify_init1 332
      # else
      #  error "need __NR_inotify_init1"
      # endif
      #endif
      
      #define IN_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        int fd;
        fd = syscall (__NR_inotify_init1, 0);
        if (fd == -1)
          {
            puts ("inotify_init1(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("inotify_init1(0) set close-on-exit");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_inotify_init1, IN_CLOEXEC);
        if (fd == -1)
          {
            puts ("inotify_init1(IN_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      
      [akpm@linux-foundation.org: add sys_ni stub]
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4006553b
    • Ulrich Drepper's avatar
      flag parameters: pipe · ed8cae8b
      Ulrich Drepper authored
      This patch introduces the new syscall pipe2 which is like pipe but it also
      takes an additional parameter which takes a flag value.  This patch implements
      the handling of O_CLOEXEC for the flag.  I did not add support for the new
      syscall for the architectures which have a special sys_pipe implementation.  I
      think the maintainers of those archs have the chance to go with the unified
      implementation but that's up to them.
      
      The implementation introduces do_pipe_flags.  I did that instead of changing
      all callers of do_pipe because some of the callers are written in assembler.
      I would probably screw up changing the assembly code.  To avoid breaking code
      do_pipe is now a small wrapper around do_pipe_flags.  Once all callers are
      changed over to do_pipe_flags the old do_pipe function can be removed.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_pipe2
      # ifdef __x86_64__
      #  define __NR_pipe2 293
      # elif defined __i386__
      #  define __NR_pipe2 331
      # else
      #  error "need __NR_pipe2"
      # endif
      #endif
      
      int
      main (void)
      {
        int fd[2];
        if (syscall (__NR_pipe2, fd, 0) != 0)
          {
            puts ("pipe2(0) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            int coe = fcntl (fd[i], F_GETFD);
            if (coe == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if (coe & FD_CLOEXEC)
              {
                printf ("pipe2(0) set close-on-exit for fd[%d]\n", i);
                return 1;
              }
          }
        close (fd[0]);
        close (fd[1]);
      
        if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0)
          {
            puts ("pipe2(O_CLOEXEC) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            int coe = fcntl (fd[i], F_GETFD);
            if (coe == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if ((coe & FD_CLOEXEC) == 0)
              {
                printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i);
                return 1;
              }
          }
        close (fd[0]);
        close (fd[1]);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      ed8cae8b
    • Ulrich Drepper's avatar
      flag parameters: dup2 · 336dd1f7
      Ulrich Drepper authored
      This patch adds the new dup3 syscall.  It extends the old dup2 syscall by one
      parameter which is meant to hold a flag value.  Support for the O_CLOEXEC flag
      is added in this patch.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <time.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_dup3
      # ifdef __x86_64__
      #  define __NR_dup3 292
      # elif defined __i386__
      #  define __NR_dup3 330
      # else
      #  error "need __NR_dup3"
      # endif
      #endif
      
      int
      main (void)
      {
        int fd = syscall (__NR_dup3, 1, 4, 0);
        if (fd == -1)
          {
            puts ("dup3(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("dup3(0) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_dup3, 1, 4, O_CLOEXEC);
        if (fd == -1)
          {
            puts ("dup3(O_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("dup3(O_CLOEXEC) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      336dd1f7
    • Ulrich Drepper's avatar
      flag parameters: epoll_create · a0998b50
      Ulrich Drepper authored
      This patch adds the new epoll_create2 syscall.  It extends the old epoll_create
      syscall by one parameter which is meant to hold a flag value.  In this
      patch the only flag support is EPOLL_CLOEXEC which causes the close-on-exec
      flag for the returned file descriptor to be set.
      
      A new name EPOLL_CLOEXEC is introduced which in this implementation must
      have the same value as O_CLOEXEC.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <time.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_epoll_create2
      # ifdef __x86_64__
      #  define __NR_epoll_create2 291
      # elif defined __i386__
      #  define __NR_epoll_create2 329
      # else
      #  error "need __NR_epoll_create2"
      # endif
      #endif
      
      #define EPOLL_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        int fd = syscall (__NR_epoll_create2, 1, 0);
        if (fd == -1)
          {
            puts ("epoll_create2(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("epoll_create2(0) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_epoll_create2, 1, EPOLL_CLOEXEC);
        if (fd == -1)
          {
            puts ("epoll_create2(EPOLL_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a0998b50
    • Ulrich Drepper's avatar
      flag parameters: timerfd_create · 11fcb6c1
      Ulrich Drepper authored
      The timerfd_create syscall already has a flags parameter.  It just is
      unused so far.  This patch changes this by introducing the TFD_CLOEXEC
      flag to set the close-on-exec flag for the returned file descriptor.
      
      A new name TFD_CLOEXEC is introduced which in this implementation must
      have the same value as O_CLOEXEC.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <time.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_timerfd_create
      # ifdef __x86_64__
      #  define __NR_timerfd_create 283
      # elif defined __i386__
      #  define __NR_timerfd_create 322
      # else
      #  error "need __NR_timerfd_create"
      # endif
      #endif
      
      #define TFD_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        int fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, 0);
        if (fd == -1)
          {
            puts ("timerfd_create(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("timerfd_create(0) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_timerfd_create, CLOCK_REALTIME, TFD_CLOEXEC);
        if (fd == -1)
          {
            puts ("timerfd_create(TFD_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("timerfd_create(TFD_CLOEXEC) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      11fcb6c1
    • Ulrich Drepper's avatar
      flag parameters: eventfd · b087498e
      Ulrich Drepper authored
      This patch adds the new eventfd2 syscall.  It extends the old eventfd
      syscall by one parameter which is meant to hold a flag value.  In this
      patch the only flag support is EFD_CLOEXEC which causes the close-on-exec
      flag for the returned file descriptor to be set.
      
      A new name EFD_CLOEXEC is introduced which in this implementation must
      have the same value as O_CLOEXEC.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_eventfd2
      # ifdef __x86_64__
      #  define __NR_eventfd2 290
      # elif defined __i386__
      #  define __NR_eventfd2 328
      # else
      #  error "need __NR_eventfd2"
      # endif
      #endif
      
      #define EFD_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        int fd = syscall (__NR_eventfd2, 1, 0);
        if (fd == -1)
          {
            puts ("eventfd2(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("eventfd2(0) sets close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC);
        if (fd == -1)
          {
            puts ("eventfd2(EFD_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      
      [akpm@linux-foundation.org: add sys_ni stub]
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b087498e
    • Ulrich Drepper's avatar
      flag parameters: signalfd · 9deb27ba
      Ulrich Drepper authored
      This patch adds the new signalfd4 syscall.  It extends the old signalfd
      syscall by one parameter which is meant to hold a flag value.  In this
      patch the only flag support is SFD_CLOEXEC which causes the close-on-exec
      flag for the returned file descriptor to be set.
      
      A new name SFD_CLOEXEC is introduced which in this implementation must
      have the same value as O_CLOEXEC.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <signal.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_signalfd4
      # ifdef __x86_64__
      #  define __NR_signalfd4 289
      # elif defined __i386__
      #  define __NR_signalfd4 327
      # else
      #  error "need __NR_signalfd4"
      # endif
      #endif
      
      #define SFD_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        sigset_t ss;
        sigemptyset (&ss);
        sigaddset (&ss, SIGUSR1);
        int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0);
        if (fd == -1)
          {
            puts ("signalfd4(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("signalfd4(0) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC);
        if (fd == -1)
          {
            puts ("signalfd4(SFD_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      
      [akpm@linux-foundation.org: add sys_ni stub]
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9deb27ba
    • Ulrich Drepper's avatar
      flag parameters: anon_inode_getfd extension · 7d9dbca3
      Ulrich Drepper authored
      This patch just extends the anon_inode_getfd interface to take an additional
      parameter with a flag value.  The flag value is passed on to
      get_unused_fd_flags in anticipation for a use with the O_CLOEXEC flag.
      
      No actual semantic changes here, the changed callers all pass 0 for now.
      
      [akpm@linux-foundation.org: KVM fix]
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7d9dbca3
    • Ulrich Drepper's avatar
      flag parameters: paccept w/out set_restore_sigmask · c019bbc6
      Ulrich Drepper authored
      Some platforms do not have support to restore the signal mask in the
      return path from a syscall.  For those platforms syscalls like pselect are
      not defined at all.  This is, I think, not a good choice for paccept()
      since paccept() adds more value on top of accept() than just the signal
      mask handling.
      
      Therefore this patch defines a scaled down version of the sys_paccept
      function for those platforms.  It returns -EINVAL in case the signal mask
      is non-NULL but behaves the same otherwise.
      
      Note that I explicitly included <linux/thread_info.h>.  I saw that it is
      currently included but indirectly two levels down.  There is too much risk
      in relying on this.  The header might change and then suddenly the
      function definition would change without anyone immediately noticing.
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Cc: Davide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c019bbc6
    • Ulrich Drepper's avatar
      flag parameters: paccept · aaca0bdc
      Ulrich Drepper authored
      This patch is by far the most complex in the series.  It adds a new syscall
      paccept.  This syscall differs from accept in that it adds (at the userlevel)
      two additional parameters:
      
      - a signal mask
      - a flags value
      
      The flags parameter can be used to set flag like SOCK_CLOEXEC.  This is
      imlpemented here as well.  Some people argued that this is a property which
      should be inherited from the file desriptor for the server but this is against
      POSIX.  Additionally, we really want the signal mask parameter as well
      (similar to pselect, ppoll, etc).  So an interface change in inevitable.
      
      The flag value is the same as for socket and socketpair.  I think diverging
      here will only create confusion.  Similar to the filesystem interfaces where
      the use of the O_* constants differs, it is acceptable here.
      
      The signal mask is handled as for pselect etc.  The mask is temporarily
      installed for the thread and removed before the call returns.  I modeled the
      code after pselect.  If there is a problem it's likely also in pselect.
      
      For architectures which use socketcall I maintained this interface instead of
      adding a system call.  The symmetry shouldn't be broken.
      
      The following test must be adjusted for architectures other than x86 and
      x86-64 and in case the syscall numbers changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <errno.h>
      #include <fcntl.h>
      #include <pthread.h>
      #include <signal.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <netinet/in.h>
      #include <sys/socket.h>
      #include <sys/syscall.h>
      
      #ifndef __NR_paccept
      # ifdef __x86_64__
      #  define __NR_paccept 288
      # elif defined __i386__
      #  define SYS_PACCEPT 18
      #  define USE_SOCKETCALL 1
      # else
      #  error "need __NR_paccept"
      # endif
      #endif
      
      #ifdef USE_SOCKETCALL
      # define paccept(fd, addr, addrlen, mask, flags) \
        ({ long args[6] = { \
             (long) fd, (long) addr, (long) addrlen, (long) mask, 8, (long) flags }; \
           syscall (__NR_socketcall, SYS_PACCEPT, args); })
      #else
      # define paccept(fd, addr, addrlen, mask, flags) \
        syscall (__NR_paccept, fd, addr, addrlen, mask, 8, flags)
      #endif
      
      #define PORT 57392
      
      #define SOCK_CLOEXEC O_CLOEXEC
      
      static pthread_barrier_t b;
      
      static void *
      tf (void *arg)
      {
        pthread_barrier_wait (&b);
        int s = socket (AF_INET, SOCK_STREAM, 0);
        struct sockaddr_in sin;
        sin.sin_family = AF_INET;
        sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
        sin.sin_port = htons (PORT);
        connect (s, (const struct sockaddr *) &sin, sizeof (sin));
        close (s);
      
        pthread_barrier_wait (&b);
        s = socket (AF_INET, SOCK_STREAM, 0);
        sin.sin_port = htons (PORT);
        connect (s, (const struct sockaddr *) &sin, sizeof (sin));
        close (s);
        pthread_barrier_wait (&b);
      
        pthread_barrier_wait (&b);
        sleep (2);
        pthread_kill ((pthread_t) arg, SIGUSR1);
      
        return NULL;
      }
      
      static void
      handler (int s)
      {
      }
      
      int
      main (void)
      {
        pthread_barrier_init (&b, NULL, 2);
      
        struct sockaddr_in sin;
        pthread_t th;
        if (pthread_create (&th, NULL, tf, (void *) pthread_self ()) != 0)
          {
            puts ("pthread_create failed");
            return 1;
          }
      
        int s = socket (AF_INET, SOCK_STREAM, 0);
        int reuse = 1;
        setsockopt (s, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof (reuse));
        sin.sin_family = AF_INET;
        sin.sin_addr.s_addr = htonl (INADDR_LOOPBACK);
        sin.sin_port = htons (PORT);
        bind (s, (struct sockaddr *) &sin, sizeof (sin));
        listen (s, SOMAXCONN);
      
        pthread_barrier_wait (&b);
      
        int s2 = paccept (s, NULL, 0, NULL, 0);
        if (s2 < 0)
          {
            puts ("paccept(0) failed");
            return 1;
          }
      
        int coe = fcntl (s2, F_GETFD);
        if (coe & FD_CLOEXEC)
          {
            puts ("paccept(0) set close-on-exec-flag");
            return 1;
          }
        close (s2);
      
        pthread_barrier_wait (&b);
      
        s2 = paccept (s, NULL, 0, NULL, SOCK_CLOEXEC);
        if (s2 < 0)
          {
            puts ("paccept(SOCK_CLOEXEC) failed");
            return 1;
          }
      
        coe = fcntl (s2, F_GETFD);
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("paccept(SOCK_CLOEXEC) does not set close-on-exec flag");
            return 1;
          }
        close (s2);
      
        pthread_barrier_wait (&b);
      
        struct sigaction sa;
        sa.sa_handler = handler;
        sa.sa_flags = 0;
        sigemptyset (&sa.sa_mask);
        sigaction (SIGUSR1, &sa, NULL);
      
        sigset_t ss;
        pthread_sigmask (SIG_SETMASK, NULL, &ss);
        sigaddset (&ss, SIGUSR1);
        pthread_sigmask (SIG_SETMASK, &ss, NULL);
      
        sigdelset (&ss, SIGUSR1);
        alarm (4);
        pthread_barrier_wait (&b);
      
        errno = 0 ;
        s2 = paccept (s, NULL, 0, &ss, 0);
        if (s2 != -1 || errno != EINTR)
          {
            puts ("paccept did not fail with EINTR");
            return 1;
          }
      
        close (s);
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      
      [akpm@linux-foundation.org: make it compile]
      [akpm@linux-foundation.org: add sys_ni stub]
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: <linux-arch@vger.kernel.org>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Roland McGrath <roland@redhat.com>
      Cc: Kyle McMartin <kyle@mcmartin.ca>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      aaca0bdc
    • Ulrich Drepper's avatar
      flag parameters: socket and socketpair · a677a039
      Ulrich Drepper authored
      This patch adds support for flag values which are ORed to the type passwd
      to socket and socketpair.  The additional code is minimal.  The flag
      values in this implementation can and must match the O_* flags.  This
      avoids overhead in the conversion.
      
      The internal functions sock_alloc_fd and sock_map_fd get a new parameters
      and all callers are changed.
      
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      #include <fcntl.h>
      #include <stdio.h>
      #include <unistd.h>
      #include <netinet/in.h>
      #include <sys/socket.h>
      
      #define PORT 57392
      
      /* For Linux these must be the same.  */
      #define SOCK_CLOEXEC O_CLOEXEC
      
      int
      main (void)
      {
        int fd;
        fd = socket (PF_INET, SOCK_STREAM, 0);
        if (fd == -1)
          {
            puts ("socket(0) failed");
            return 1;
          }
        int coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if (coe & FD_CLOEXEC)
          {
            puts ("socket(0) set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        fd = socket (PF_INET, SOCK_STREAM|SOCK_CLOEXEC, 0);
        if (fd == -1)
          {
            puts ("socket(SOCK_CLOEXEC) failed");
            return 1;
          }
        coe = fcntl (fd, F_GETFD);
        if (coe == -1)
          {
            puts ("fcntl failed");
            return 1;
          }
        if ((coe & FD_CLOEXEC) == 0)
          {
            puts ("socket(SOCK_CLOEXEC) does not set close-on-exec flag");
            return 1;
          }
        close (fd);
      
        int fds[2];
        if (socketpair (PF_UNIX, SOCK_STREAM, 0, fds) == -1)
          {
            puts ("socketpair(0) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            coe = fcntl (fds[i], F_GETFD);
            if (coe == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if (coe & FD_CLOEXEC)
              {
                printf ("socketpair(0) set close-on-exec flag for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        if (socketpair (PF_UNIX, SOCK_STREAM|SOCK_CLOEXEC, 0, fds) == -1)
          {
            puts ("socketpair(SOCK_CLOEXEC) failed");
            return 1;
          }
        for (int i = 0; i < 2; ++i)
          {
            coe = fcntl (fds[i], F_GETFD);
            if (coe == -1)
              {
                puts ("fcntl failed");
                return 1;
              }
            if ((coe & FD_CLOEXEC) == 0)
              {
                printf ("socketpair(SOCK_CLOEXEC) does not set close-on-exec flag for fds[%d]\n", i);
                return 1;
              }
            close (fds[i]);
          }
      
        puts ("OK");
      
        return 0;
      }
      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
      Signed-off-by: default avatarUlrich Drepper <drepper@redhat.com>
      Acked-by: default avatarDavide Libenzi <davidel@xmailserver.org>
      Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
      Cc: "David S. Miller" <davem@davemloft.net>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      a677a039
    • Akinobu Mita's avatar
    • Adrian Bunk's avatar
      CONFIG_SOUND_WM97XX: remove stale makefile line · 76a6f3dc
      Adrian Bunk authored
      The driver is gone for a long time.
      Reported-by: default avatarRobert P. J. Day <rpjday@crashcourse.ca>
      Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      76a6f3dc
    • Adrian Bunk's avatar
      remove the OSS trident driver · 7102ed51
      Adrian Bunk authored
      SOUND_TRIDENT was the last PCI OSS driver, and since there's already an
      ALSA driver for the same hardware we can remove it.
      
      [muli@il.ibm.com: update CREDITS]
      Signed-off-by: default avatarAdrian Bunk <bunk@kernel.org>
      Signed-off-by: default avatarMuli Ben-Yehuda <muli@il.ibm.com>
      Signed-off-by: default avatarMuli Ben-Yehuda <muli@il.ibm.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7102ed51
    • Andy Whitcroft's avatar
      33cba065
    • Andy Whitcroft's avatar
      checkpatch: types cannot start mid word for pointer tests · 234fff65
      Andy Whitcroft authored
      When checking spacing for pointer checks the type cannot start in the
      middle of a word, ie. this is not 'int * bar':
      
      	x = fooint * bar;
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      234fff65
    • Andy Whitcroft's avatar
      checkpatch: complex macros need to ignore comments · 292f1a9b
      Andy Whitcroft authored
      Ensure we ignore comments in complex macro detection else we incorrectly
      report this:
      
      	#define PFM_GROUP_PERM_ANY     -1      /* any user/group */
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      292f1a9b
    • Andy Whitcroft's avatar
      checkpatch: variants -- move the main unary/binary operators to use variants · 74048ed8
      Andy Whitcroft authored
      Now that we have a variants system, move to using that to carry the
      unary/binary designation for +, -, &, and *.
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      74048ed8
    • Andy Whitcroft's avatar
      checkpatch: add checks for question mark and colon spacing · 1f65f947
      Andy Whitcroft authored
      Add checks for the question mark colon operator spacing, and also check
      the other uses of colon.  Colon means a number of things:
      
       - it introduces the else part of the ?: operator,
       - it terminates a goto label,
       - it terminates the case value,
       - it separates the identifier from the bit size on bit fields, and
       - it is used to introduce option types in asm().
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      1f65f947
    • Andy Whitcroft's avatar
      checkpatch: possible modifiers -- handle multiple modifiers and trailing · d2506586
      Andy Whitcroft authored
      Add support for multiple modifiers such as:
      
      	int __one __two foo;
      
      Also handle trailing known modifiers when defecting modifiers:
      
      	int __one foo __read_mostly;
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d2506586
    • Andy Whitcroft's avatar
      checkpatch: possible types -- known modifiers cannot be types · 0221f55c
      Andy Whitcroft authored
      Ensure we do not inadvertantly load known modifiers up as possible types.
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      0221f55c
    • Andy Whitcroft's avatar
      checkpatch: handle return types of pointers to functions · 8ea3eb9a
      Andy Whitcroft authored
      Make sure we correctly mark the return type of the pointer to a function
      declaration.
      
          const void *(*sb_tag)(struct sysfs_tag_info *info);
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      8ea3eb9a
    • Andy Whitcroft's avatar
      checkpatch: macro complexity checks are meaningless in linker scripts · b8f96a31
      Andy Whitcroft authored
      Exclude vmlinux.lds.h from the macro complexity checks.  They will never
      apply sanely here.
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b8f96a31
    • Andy Whitcroft's avatar
      checkpatch: possible modifiers are not being correctly matched · d2172eb5
      Andy Whitcroft authored
      Although we are finding the added modifier in the declaration below
      we are not correctly matching it as a type.  Fix the declaration.
      
          static void __ref *vmem_alloc_pages(unsigned int order)
          {
          }
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      d2172eb5
    • Andy Whitcroft's avatar
      checkpatch: improve type matcher debug · 7429c690
      Andy Whitcroft authored
      Improve type matcher debug so we can see what it does match.  As part
      of this move us to to using the common debug framework.
      Signed-off-by: default avatarAndy Whitcroft <apw@shadowen.org>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      7429c690