- 28 Sep, 2011 5 commits
-
-
Yoshihiro Shimoda authored
This patch also changes writel/readl to iowrite32/ioread32. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Oliver Hartkopp authored
This patch adds the driver for the SJA1000 based PCMCIA card 'CPC-Card' from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de). Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Markus Plessing <plessing@ems-wuensche.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Zapolskiy authored
Add an event to monitor comm value changes of tasks. Such an event becomes vital, if someone desires to control threads of a process in different manner. A natural characteristic of threads is its comm value, and helpfully application developers have an opportunity to change it in runtime. Reporting about such events via proc connector allows to fine-grain monitoring and control potentials, for instance a process control daemon listening to proc connector and following comm value policies can place specific threads to assigned cgroup partitions. It might be possible to achieve a pale partial one-shot likeness without this update, if an application changes comm value of a thread generator task beforehand, then a new thread is cloned, and after that proc connector listener gets the fork event and reads new thread's comm value from procfs stat file, but this change visibly simplifies and extends the matter. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Changli Gao authored
The upper protocol numbers of PPPOE are different, and should be treated specially. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Since commit 7361c36c (af_unix: Allow credentials to work across user and pid namespaces) af_unix performance dropped a lot. This is because we now take a reference on pid and cred in each write(), and release them in read(), usually done from another process, eventually from another cpu. This triggers false sharing. # Events: 154K cycles # # Overhead Command Shared Object Symbol # ........ ....... .................. ......................... # 10.40% hackbench [kernel.kallsyms] [k] put_pid 8.60% hackbench [kernel.kallsyms] [k] unix_stream_recvmsg 7.87% hackbench [kernel.kallsyms] [k] unix_stream_sendmsg 6.11% hackbench [kernel.kallsyms] [k] do_raw_spin_lock 4.95% hackbench [kernel.kallsyms] [k] unix_scm_to_skb 4.87% hackbench [kernel.kallsyms] [k] pid_nr_ns 4.34% hackbench [kernel.kallsyms] [k] cred_to_ucred 2.39% hackbench [kernel.kallsyms] [k] unix_destruct_scm 2.24% hackbench [kernel.kallsyms] [k] sub_preempt_count 1.75% hackbench [kernel.kallsyms] [k] fget_light 1.51% hackbench [kernel.kallsyms] [k] __mutex_lock_interruptible_slowpath 1.42% hackbench [kernel.kallsyms] [k] sock_alloc_send_pskb This patch includes SCM_CREDENTIALS information in a af_unix message/skb only if requested by the sender, [man 7 unix for details how to include ancillary data using sendmsg() system call] Note: This might break buggy applications that expected SCM_CREDENTIAL from an unaware write() system call, and receiver not using SO_PASSCRED socket option. If SOCK_PASSCRED is set on source or destination socket, we still include credentials for mere write() syscalls. Performance boost in hackbench : more than 50% gain on a 16 thread machine (2 quad-core cpus, 2 threads per core) hackbench 20 thread 2000 4.228 sec instead of 9.102 sec Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Sep, 2011 13 commits
-
-
Stephen Hemminger authored
Most boards with SysKonnect/Marvell Ethernet have only a single port. For the single port case, use the standard Ethernet driver convention of allocating IRQ when device is brought up rather than at probe time. This patch also adds some additional read after writes to avoid any PCI posting problems when setting the IRQ mask. The error handling of dual port cards is also changed. If second port can not be brought up, then just fail. No point in continuing, since the failure is most certainly because of out of memory. It is worth noting that the dual port skge device has a single irq but two seperate status rings and therefore has two NAPI objects, one for each port. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
This fix provides a newly flashed FW version (appended, in braces) along with the currently running FW version via ethtool. The newly flashed version runs only after a system reset. Signed-off-by: Suresh Reddy <Suresh.Reddy@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sathya Perla authored
Re-posting with subject fixed! Multicast programming has been broken since commit 5b8821b7. Setting the MULTICAST flag while sending the cmd to the FW was missing. Fixed this. Also fixed-up some indentation in the adjacent lines. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Rename struct tcp_skb_cb "flags" to "tcp_flags" to ease code review and maintenance. Its content is a combination of FIN/SYN/RST/PSH/ACK/URG/ECE/CWR flags Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
struct tcp_skb_cb contains a "flags" field containing either tcp flags or IP dsfield depending on context (input or output path) Introduce ip_dsfield to make the difference clear and ease maintenance. If later we want to save space, we can union flags/ip_dsfield Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch touchs most of the enic port profile handling code. Tried to break it into sub patches without success. The patch mainly does the following: - Port profile operations for a SRIOV VF are modified to work only via its PF - Changes the port profile static struct in struct enic to a pointer. This is because a SRIOV PF has to now hold the port profile information for all its VF's - Moved address registration for VF's during port profile ASSOCIATE time - Most changes in port profile handling code are changes related to indexing into the port profile struct array of a PF for the VF port profile information Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch adds helper functions to use PF as proxy for SRIOV VF firmware commands. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch adds support to enable SRIOV on enic devices. Enic SRIOV VF's are dynamic vnics and will use the same driver code as dynamic vnics. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: David Wang <dwang2@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
While playing with a new ADSL box at home, I discovered that ECN blackhole can trigger suboptimal quickack mode on linux : We send one ACK for each incoming data frame, without any delay and eventual piggyback. This is because TCP_ECN_check_ce() considers that if no ECT is seen on a segment, this is because this segment was a retransmit. Refine this heuristic and apply it only if we seen ECT in a previous segment, to detect ECN blackhole at IP level. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Jerry Chu <hkchu@google.com> CC: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> CC: Jim Gettys <jg@freedesktop.org> CC: Dave Taht <dave.taht@gmail.com> Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Most sky2 hardware only has a single port, although some variations of the chip support two interfaces. For the single port case, use the standard Ethernet driver convention of allocating IRQ when device is brought up rather than at probe time. Also, change the error handling of dual port cards so that if second port can not be brought up, then just fail. No point in continuing, since the failure is most certainly because of out of memory. The dual port sky2 device has a single irq and a single status ring, therefore it has a single NAPI object shared by both ports. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jon Mason authored
netdev is unused in pch_gbe_setup_rctl. Remove this declaration to avoid a compiler warning. Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Konrad Rzeszutek Wilk authored
Device drivers that create and destroy SR-IOV virtual functions via calls to pci_enable_sriov() and pci_disable_sriov can cause catastrophic failures if they attempt to destroy VFs while they are assigned to guest virtual machines. By adding a flag for use by the Xen PCI back to indicate that a device is assigned a device driver can check that flag and avoid destroying VFs while they are assigned and avoid system failures. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
brenohl@br.ibm.com authored
Currently ehea ndo_get_stats can sleep in two places, in a hcall and in a GFP_KERNEL alloc, which is not correct. This patch creates a delayed workqueue that grabs the information each 1 sec from the hardware, and place it into the device structure, so that, .ndo_get_stats quickly returns the device structure statistics block. Signed-off-by: Breno Leitao <brenohl@br.ibm.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Sep, 2011 3 commits
-
-
Richard Cochran authored
This commit adds one step support to the phyter. When enabled, the hardware does not provide time stamps for transmitted sync messages but instead inserts the stamp into the outgoing packet. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
The IEEE 1588 standard (PTP) has a provision for a "one step" mode, where time stamps on outgoing event packets are inserted into the packet by the hardware on the fly. This patch adds a new flag for the SIOCSHWTSTAMP ioctl that lets user space programs request this mode. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Richard Cochran authored
This patch enables six external event channels and one periodic output. One GPIO is reserved for synchronizing multiple PHYs. The assignment of GPIO functions can be changed via a module parameter. The code supports multiple simultaneous events by inducing a PTP clock event for every channel marked in the PHY's extended status word. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 23 Sep, 2011 18 commits
-
-
Anirban Chakraborty authored
Argument list to CDRP function has become unmanageably long. Fix it by properly declaring a struct that encompasses all the input and output parameters. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ameen Rahman authored
Signed-off-by: Ameen Rahman <ameen.rahman@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Shawn Guo authored
The imx6q enet is a derivative of imx28 enet controller. It fixed the frame endian issue found on imx28, and added 1 Gbps support. It also fixes a typo on vendor name in Kconfig. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
In function fec_enet_mii_init(), it uses non-zero pdev->id as part of the condition to check the second fec instance (fec1). This works before the driver supports device tree probe. But in case of device tree probe, pdev->id is -1 which is also non-zero, so the logic becomes broken when device tree probe gets supported. The patch change the logic to check "pdev->id > 0" as the part of the condition for identifying fec1. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Shawn Guo authored
FEC can work without a phy reset on some platforms, which means not very platform necessarily have a phy-reset gpio encoded in device tree. Even on the platforms that have the gpio, FEC can work without resetting phy for some cases, e.g. boot loader has done that. So it makes more sense to have the phy-reset-gpio request failure as a debug message rather than a warning, and get fec_reset_phy() return void since the caller does not check the return anyway. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michał Mirosław authored
Finish conversion to unified ethtool ops: convert get_flags. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
Really trivial fix, use kmalloc/kfree instead of stack space. use static const instead of const to further reduce stack usage. V2: reflect changes suggested by Joe Perches before: [jbrandeb@jbrandeb-mobl2 linux-2.6]$ make checkstack|grep '\[ixgb\]' 0x00000fc1 ixgb_set_multi [ixgb]: 768 0x00001031 ixgb_set_multi [ixgb]: 768 0x000010f2 ixgb_set_multi [ixgb]: 768 0x061c ixgb_check_options [ixgb]: 448 0x09c3 ixgb_check_options [ixgb]: 448 0x0000649e ixgb_set_ringparam [ixgb]: 192 0x0000130d ixgb_xmit_frame [ixgb]: 184 0x000019e0 ixgb_xmit_frame [ixgb]: 184 0x00002267 ixgb_clean [ixgb]: 152 0x00002673 ixgb_clean [ixgb]: 152 after: 0x000064ee ixgb_set_ringparam [ixgb]: 192 0x0000135d ixgb_xmit_frame [ixgb]: 184 0x00001a30 ixgb_xmit_frame [ixgb]: 184 0x000022b7 ixgb_clean [ixgb]: 152 0x000026c3 ixgb_clean [ixgb]: 152 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Heiko Carstens authored
The SEEQ drivers should depend on HAS_IOMEM to prevent compile breakage on !HAS_IOMEM architectures: drivers/net/ethernet/seeq/seeq8005.c: In function 'seeq8005_probe1': drivers/net/ethernet/seeq/seeq8005.c:179:2: error: implicit declaration of function 'inw' [-Werror=implicit-function-declaration] Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Emil Tantilov authored
Reloading FW during resets can cause issues. Remove the full reset as it is not needed. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
Add support for WOL as determined by the EEPROM. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
This change is meant to avoid a hardware lockup when Tx work is still pending and we request a reset. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
John Fastabend authored
This patch adds support for configuring the priority to traffic class mapping. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Don Skidmore authored
We don't need SFP+ plugable support for X540 hardware (copper only) so don't enable the SFP+ interrupts. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
John Fastabend authored
The DCB CEE command set_state() will complete successfully but is misleading because it enables IEEE mode. After this patch the command is failed. And IEEE PFC/ETS is managed from ieee paths now instead of using CEE primitives. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Use the PCI device flag indicating if a VF is assigned to a guest VM to guard against destroying VFs upon driver removal. Implement additional feature to detect if VFs already exist when the driver is loaded and if so configure them and set the driver state to SR-IOV enabled. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Device drivers that create and destroy SR-IOV virtual functions via calls to pci_enable_sriov() and pci_disable_sriov can cause catastrophic failures if they attempt to destroy VFs while they are assigned to guest virtual machines. By adding a flag for use by the KVM module to indicate that a device is assigned a device driver can check that flag and avoid destroying VFs while they are assigned and avoid system failures. CC: Ian Campbell <ijc@hellion.org.uk> CC: Konrad Wilk <konrad.wilk@oracle.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 22 Sep, 2011 1 commit
-
-
Ian Campbell authored
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Shreyas Bhatewara <sbhatewara@vmware.com> Cc: "VMware, Inc." <pv-drivers@vmware.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
-