- 25 Jun, 2005 40 commits
-
-
Andrey Panin authored
This patch moves ACPI boot quirks out of dmi_scan.c Signed-off-by:
Andrey Panin <pazke@donpac.ru> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Michael Ellerman authored
Stephen's patch to remove LparData.h missed an include in lparcfg.c This fixes a few compile warnings. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Kumar Gala authored
Continue the Good Fight: Limit bootmem.h include creep. Signed-off-by:
Jon Loeliger <jdl@freescale.com> Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
-
Kumar Gala authored
All consumers of the driver MPC10x, MPC52xx, MPC824x, MPC83xx, and MPC85xx are all using platform devices. We can get ride of the dead code to support using this driver with the old OCP based model Signed-off-by:
-
Kumar Gala authored
Support for the OCP device model on Freescale (FSL) PPC's is no longer used. All FSL PPC's that were using OCP have be converted to using the platform device model. Signed-off-by:
-
Kumar Gala authored
The e200 core is a Book-E core (similar to e500) that has a unified L1 cache and is not cache coherent on the bus. The e200 core also adds a separate exception level for debug exceptions. Part of this patch helps to cleanup a few cases that are true for all Freescale Book-E parts, not just e500. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
-
Kumar Gala authored
Ensure that the returned pointer from ppc_sys_get_pdata is not NULL before we start using it. This handles any cases where we have variants of processors on the same board with different functionality. Signed-off-by:
-
Lorenzo Hernndez Garca-Hierro authored
This patch,based on sample code by Roland McGrath, adds an execheap permission check that controls the ability to make the heap executable so that this can be prevented in almost all cases (the X server is presently an exception, but this will hopefully be resolved in the future) so that even programs with execmem permission will need to have the anonymous memory mapped in order to make it executable. The only reason that we use a permission check for such restriction (vs. making it unconditional) is that the X module loader presently needs it; it could possibly be made unconditional in the future when X is changed. The policy patch for the execheap permission is available at: http://pearls.tuxedo-es.org/patches/selinux/policy-execheap.patchSigned-off-by:
Lorenzo Hernandez Garcia-Hierro <lorenzo@gnu.org> Acked-by:
James Morris <jmorris@redhat.com> Acked-by:
Stephen Smalley <sds@tycho.nsa.gov> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Lorenzo Hernandez Garca-Hierro authored
This patch adds an execstack permission check that controls the ability to make the main process stack executable so that attempts to make the stack executable can still be prevented even if the process is allowed the existing execmem permission in order to e.g. perform runtime code generation. Note that this does not yet address thread stacks. Note also that unlike the execmem check, the execstack check is only applied on mprotect calls, not mmap calls, as the current security_file_mmap hook is not passed the necessary information presently. The original author of the code that makes the distinction of the stack region, is Ingo Molnar, who wrote it within his patch for /proc/<pid>/maps markers. (http://marc.theaimsgroup.com/?l=linux-kernel&m=110719881508591&w=2) The patches also can be found at: http://pearls.tuxedo-es.org/patches/selinux/policy-execstack.patch http://pearls.tuxedo-es.org/patches/selinux/kernel-execstack.patch policy-execstack.patch is the patch that needs to be applied to the policy in order to support the execstack permission and exclude it from general_domain_access within macros/core_macros.te. kernel-execstack.patch adds such permission to the SELinux code within the kernel and adds the proper permission check to the selinux_file_mprotect() hook. Signed-off-by:
-
Hugh Dickins authored
Out-of-tree user of remap_pfn_range hit kernel BUG at mm/memory.c:1112! It passes an unrounded size to remap_pfn_range, which was okay before 2.6.12, but misses remap_pte_range's new end condition. An audit of all the other ptwalks confirms that this is the only one so exposed. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Signed-off-by:
-
Hifumi Hisashi authored
Fix a bug on error handling in the direct I/O function. Currently, if a file is opened with the O_DIRECT|O_SYNC flag, the write() syscall cannot receive the EIO error after an I/O error (SCSI cable is disconnected etc.). Return values of other points that call generic_osync_inode() are treated appropriately. Signed-off-by:
Hisashi Hifumi <hifumi.hisashi@lab.ntt.co.jp> Signed-off-by:
-
Yoichi Yuasa authored
2.6.12-git6 doesn't boot on some MIPS machines. They need the support of flat memory and discontig memory. Signed-off-by:
Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by:
-
Russell King authored
A couple of drivers declare register_serial/unregister_serial prototypes but don't use them. FRV contains a commented out call to register_serial. Since these are deprecated, remove these unnecessary references. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Dave Jones authored
Gcc4 doesn't like volatile casts as lvalues. Make the structure members volatile instead. Signed-off-by:
Dave Jones <davej@redhat.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by:
-
Dmitry Torokhov authored
I8K: add BIOS signatures of a newer Dell laptops, also there can be more than one temperature sensor reported by BIOS. Lifted from driver 1.25 on Massimo Dal Zotto's site. Signed-off-by:Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Dmitry Torokhov authored
I8K: use module_{init|exit} instead of old style #ifdef MODULE code, some formatting changes. Signed-off-by: -
Dmitry Torokhov authored
I8K: Change proc code to use seq_file. Signed-off-by:
-
Dmitry Torokhov authored
I8K: Change to use stock dmi infrastructure instead of homegrown parsing code. The driver now requires box's DMI data to match list of supported models so driver can be safely compiled-in by default without fear of it poking into random SMM BIOS code. DMI checks can be ignored with i8k.ignore_dmi option. Signed-off-by: -
Dmitry Torokhov authored
I8K: pass through Lindent to change 4 spaces identation to TABs Signed-off-by:
-
Dmitry Torokhov authored
Toshiba legacy driver cleanup: - use module_init/module_exit for initialization instead of using #ifdef MODULE and calling tosh_init manually from drivers/char/misc.c - do not explicitly initialize static variables - some whitespace and formatting cleanups Signed-off-by:
-
Mauro Carvalho Chehab authored
static declaration of cx88_pci_irqs follows non-static. Signed-off-by:
-
Uwe Bugla authored
Signed-off-by:
-
Linus Torvalds authored
-
Russell King authored
This patch adds support for Dynamic Tick Timer for ARM. Dynamic Tick is also known as VST (Variable Scheduling Timeouts). Dynamic Tick has been in use in the OMAP tree since last October. The patch is not intrusive, and does not do anything unless CONFIG_NO_IDLE_HZ is defined. This patch has the following fixed based on comments from RMK: - Time is updated before calling interrupt handlers. - Added new interrupt flag SA_TIMER to avoid duplicate timer interrupts - Moved struct dyn_tick_timer to time.h until we at some point probably have an arch independent dyn-tick.h - Cleaned up testing for DYN_TICK_ENABLED in irq.c I've cleaned up this patch to fix some remaining issues: - Call the timer tick handler with irqs disabled, as it would be from a normal interrupt - if we have a dyn_tick, we better implement all methods. - generic timer_dyn_reprogram() call, to be called before sleeping - added command line option - "dyntick=" to allow boot-time control of this feature -- rmk Signed-off-by: Tony Lindgren Signed-off-by: -
Lennert Buytenhek authored
Patch from Lennert Buytenhek The later ixp2000 models don't need the PCI I/O workaround that we currently perform. Add a config option to disable the workaround, and panic on boot if a kernel without the workaround is booted on a buggy chip. As only pre-production ixp2000s need the workaround, the default is for it not to be configured in. Signed-off-by:
Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Deepak Saxena Signed-off-by:
-
Russell King authored
The merge of sparsemem broke ARM discontigmem. Fix it. Signed-off-by: -
-
Linus Torvalds authored
That's the part that keeps track of the ELCR register, and we want to make sure that the PCI interrupts are properly marked level/low.
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek The ixp2000 gpio cleanup broke the ixdp2800 build as it moved some gpio-related functions from arch/platform.h to arch/gpio.h and the ixdp2x00 support code used those functions but didn't include the latter header file. Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek On the enp2611, GPIO 7 and 6 are connected to an on-board i2c bus that attaches to the SODIMM module slot (for SPD) and an LM84 temperature sensor. Add a platform device for this i2c bus. Signed-off-by:
-
Lennert Buytenhek authored
Patch from Lennert Buytenhek Update the defconfigs for the ixp2000 platforms to 2.6.12-git6. Signed-off-by:
-
David S. Miller authored
Signed-off-by:David S. Miller <davem@davemloft.net>
-
Michael Chan authored
1. Move tp->irq_sync = 0 to before the interrupt mailbox IO in tg3_enable_ints() so that the interrupt handler will always see irq_sync == 0 when interrupts are enabled. 2. Remove the tg3_enable_ints() call in tg3_reset_hw(). Interrupts are always enabled explicitly or through tg3_netif_start(). This is to prevent interrupts being enabled while poll is disabled. 3. Update trans_start with jiffies in tg3_netif_stop() to prevent false NETDEV WATCHDOG. 4. Pass in the proper irq_sync parameter to tg3_full_lock() depending on netif_running() in some of the ethtool set calls. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
-
David S. Miller authored
Move all driver spinlocks to be taken at sw IRQ context only. This fixes the skb_copy() we were doing with hw IRQs disabled (which is illegal and triggers a BUG() with HIGHMEM enabled). It also simplifies the locking all over the driver tremendously. We accomplish this feat by creating a special sequence to synchronize with the hw IRQ handler using a binary state and synchronize_irq(). This idea is from Herbert Xu. Thanks to Michael Chan for helping to track down all of the race conditions in initial versions of this code. Signed-off-by: -
David S. Miller authored
There must be a rmb() between reading the status block tag and calling tg3_has_work(). This was missing in tg3_mis() and tg3_interrupt_tagged(). tg3_poll() got it right. Also, SD_STATUS_UPDATED must be cleared in the status block right before we call tg3_has_work(). Only tg3_poll() got this wrong. Based upon patches and commentary from Grant Grundler and Michael Chan. Signed-off-by: -
David S. Miller authored
Signed-off-by: -
William Lee Irwin III authored
From: William Lee Irwin III <wli@holomorphy.com> This small patch silences some iomem-related warnings in sunzilog.c by declaring mapped_addr as void __iomem * and inserting a cast in one case. Signed-off-by:
-
David S. Miller authored
Signed-off-by: -
David S. Miller authored
Create TCP_CONG_ADVANCED option, akin to IP_ADVANCED_ROUTER, which when disabled will bypass all of the congestion control Kconfig options and leave the user with a safe default. That safe default is currently BIC-TCP with new Reno as a fallback. Signed-off-by: -
David S. Miller authored
Most users need not be concerned with a complex choice of what FIB lookup algorithm to use. So give them the safe default of IP_FIB_HASH if IP_ADVANCED_ROUTING is disabled. Signed-off-by:
-
