When the transition of NO_STP -> KERNEL_STP was fixed by always calling
mod_timer in br_stp_start, it introduced a new regression which causes
the timer to be armed even when the bridge is down, and since we stop
the timers in its ndo_stop() function, they never get disabled if the
device is destroyed before it's upped.

To reproduce:
$ while :; do ip l add br0 type bridge hello_time 100; brctl stp br0 on;
ip l del br0; done;

CC: Xin Long <lucien.xin@gmail.com>
CC: Ivan Vecera <cera@cera.cz>
CC: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Fixes: 6d18c732 ("bridge: start hello_timer when enabling KERNEL_STP in br_stp_start")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Apparently multi-cos isn't working for bnx2x quite some time -
driver implements ndo_select_queue() to allow queue-selection
for FCoE, but the regular L2 flow would cause it to modulo the
fallback's result by the number of queues.
The fallback would return a queue matching the needed tc
[via __skb_tx_hash()], but since the modulo is by the number of TSS
queues where number of TCs is not accounted, transmission would always
be done by a queue configured into using TC0.

Fixes: ada7c19e ("bnx2x: use XPS if possible for bnx2x_select_queue instead of pure hash")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change t4fw_version.h to update latest firmware version
number to 1.16.45.0.
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NETLINK_F_LISTEN_ALL_NSID otion enables to listen all netns that have a
nsid assigned into the netns where the netlink socket is opened.
The nsid is sent as metadata to userland, but the existence of this nsid is
checked only for netns that are different from the socket netns. Thus, if
no nsid is assigned to the socket netns, NETNSA_NSID_NOT_ASSIGNED is
reported to the userland. This value is confusing and useless.
After this patch, only valid nsid are sent to userland.
Reported-by: Flavio Leitner <fbl@sysclose.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver may sleep under a write spin lock, and the function
call path is:
qlcnic_82xx_hw_write_wx_2M (acquire the lock by write_lock_irqsave)
  crb_win_lock
    qlcnic_pcie_sem_lock
      usleep_range
qlcnic_82xx_hw_read_wx_2M (acquire the lock by write_lock_irqsave)
  crb_win_lock
    qlcnic_pcie_sem_lock
      usleep_range

To fix it, the usleep_range is replaced with udelay.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

recent fixes to use WRITE_ONCE for nh_flags on link up,
accidently ended up leaving the deadflags on a nh. This patch
fixes the WRITE_ONCE to use freshly evaluated nh_flags.

Fixes: 39eb8cd1 ("net: mpls: rt_nhn_alive and nh_flags should be accessed using READ_ONCE")
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The driver may sleep under a spin lock, the function call path is:
isdn_ppp_mp_receive (acquire the lock)
  isdn_ppp_mp_reassembly
    isdn_ppp_push_higher
      isdn_ppp_decompress
        isdn_ppp_ccp_reset_trans
          isdn_ppp_ccp_reset_alloc_state
            kzalloc(GFP_KERNEL) --> may sleep

To fixed it, the "GFP_KERNEL" is replaced with "GFP_ATOMIC".
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add NULL check before dereferencing pointer _id_ in order to avoid
a potential NULL pointer dereference.

Addresses-Coverity-ID: 1397995
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Auto-loading of the Marvell DSA driver has stopped working with recent
kernels.  This seems to be due to the change of binding for DSA devices,
moving them from the platform bus to the MDIO bus.

In order for module auto-loading to work, we need to provide a MODALIAS
string in the uevent file for the device.  However, the device core does
not automatically provide this, and needs each bus_type to implement a
uevent method to generate these strings.  The MDIO bus does not provide
such a method, so no MODALIAS string is provided:

.# cat /sys/bus/mdio_bus/devices/f1072004.mdio-mii\:04/uevent
DRIVER=mv88e6085
OF_NAME=switch
OF_FULLNAME=/soc/internal-regs/mdio@72004/switch@4
OF_COMPATIBLE_0=marvell,mv88e6085
OF_COMPATIBLE_N=1

In the case of OF-based devices, the solution is easy -
of_device_uevent_modalias() does the work for us.  After this is done,
the uevent file looks like this:

.# cat /sys/bus/mdio_bus/devices/f1072004.mdio-mii\:04/uevent
DRIVER=mv88e6085
OF_NAME=switch
OF_FULLNAME=/soc/internal-regs/mdio@72004/switch@4
OF_COMPATIBLE_0=marvell,mv88e6085
OF_COMPATIBLE_N=1
MODALIAS=of:NswitchT<NULL>Cmarvell,mv88e6085

which results in auto-loading of the Marvell DSA driver on Clearfog
platforms.

Fixes: c0405563 ("ARM: dts: armada-388-clearfog: Utilize new DSA binding")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The Marvell driver incorrectly provides phydev->lp_advertising as the
logical and of the link partner's advert and our advert.  This is
incorrect - this field is supposed to store the link parter's unmodified
advertisment.

This allows ethtool to report the correct link partner auto-negotiation
status.

Fixes: be937f1f ("Marvell PHY m88e1111 driver fix")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MTU probing initialization occurred only at connect() and at SYN or
SYN-ACK reception, but the former sets MSS to either the default or the
user set value (through TCP_MAXSEG sockopt) and the latter never happens
with repaired sockets.

The result was that, with MTU probing enabled and unless TCP_MAXSEG
sockopt was used before connect(), probing would be stuck at
tcp_base_mss value until tcp_probe_interval seconds have passed.
Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

Tariq Toukan says:

====================
MAINTAINERS updates

This patchset contains updates to the MAINTAINERS file.
In the first patch, I replace Yishai as the maintainer of
the mlx4_core driver.

In the other two patches we move an RDMA header file from
the list of the mlx4/mlx5 core driver into the respective
IB driver, where it belongs.

Series generated against net commit:
468b0df6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

It belongs there, should not be under mlx5 Core driver.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It belongs there, should not be under mlx4 Core driver.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add myself as a maintainer for mlx4 core driver,
replacing Yishai Hadas.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Building the driver with CONFIG_SMP disabled results in a harmless
warning:

ethernet/mellanox/mlx5/core/main.c: In function 'mlx5_irq_set_affinity_hint':
ethernet/mellanox/mlx5/core/main.c:615:6: error: unused variable 'irq' [-Werror=unused-variable]

It's better to express the conditional compilation using IS_ENABLED()
here, as that lets the compiler see what the intented use for the variable
is, and that it can be silently discarded.

Fixes: b665d98e ("net/mlx5: Tolerate irq_set_affinity_hint() failures")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'static' was not enough, the helpers must be 'static inline'

net/dsa/mv88e6xxx/global2.h:123:12: error: 'mv88e6xxx_g2_misc_4_bit_port' defined but not used [-Werror=unused-function]
net/dsa/mv88e6xxx/global2.h:117:12: error: 'mv88e6xxx_g2_pvt_write' defined but not used [-Werror=unused-function]

Fixes: c21fbe29 ("net: dsa: mv88e6xxx: Add missing static to stub functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current implementation lacks the logic for providing management
firmware with RDMA-related statistics; [much] worse than that -
it logs such events by default to system logs.

Since the statistics' gathering is done periodically, using sufficiently
new management firmware the system logs would get filled with these
unnecessary prints.

For now, reduce the verbosity of the log so that it would not be
logged by default.

Fixes: 6c754246 ("qed: Add support for NCSI statistics")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During PCI error recovery process, specifically on eeh_err_detected()
we might have a NULL netdev struct, hence a direct dereference will
lead to a kernel oops. This was observed with latest upstream kernel
(v4.12-rc2) on Chelsio adapter T422-CR in PowerPC machines.

This patch checks for NULL pointer and avoids the crash, both in
eeh_err_detected() and eeh_resume(). Also, we avoid to trigger
a fatal error or to try disabling interrupts on FW during PCI
error recovery, because: (a) driver might not be able to accurately
access PCI regions in this case, and (b) trigger a fatal error
_during_ the recovery steps is a mistake that could prevent the
recovery path to complete successfully.
Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree,
they are:

1) Conntrack SCTP CRC32c checksum mangling may operate on non-linear
   skbuff, patch from Davide Caratti.

2) nf_tables rb-tree set backend does not handle element re-addition
   after deletion in the same transaction, leading to infinite loop.

3) Atomically unclear the IPS_SRC_NAT_DONE_BIT on nat module removal,
   from Liping Zhang.

4) Conntrack hashtable resizing while ctnetlink dump is progress leads
   to a dead reference to released objects in the lists, also from
   Liping.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Stub functions in header files need to be static, or we can have
multiple definitions errors.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: 6335e9f2 ("net: dsa: mv88e6xxx: mv88e6390X SERDES support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

syszkaller fuzzer triggered a divide by zero, when set calibration
through ioctl().

To fix it, test 'bitrate' if it is negative or 0, just return -EINVAL.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Firo Yang <firogm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The binding documentation for the mv88e6xxx switch is missing the
eeprom-length property, which has been implemented since May 2016,
commit f8cd8753 ("dsa: mv88e6xxx: Handle eeprom-length property")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds

Pull LED fix from Jacek Anaszewski:
 "A single LED fix for 4.12-rc3.

  leds-pca955x driver uses only i2c_smbus API and thus it should pass
  I2C_FUNC_SMBUS_BYTE_DATA flag to i2c_check_functionality"

* tag 'led_fixes_for_4-12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: pca955x: Correct I2C Functionality

Pull networking fixes from David Miller:

 1) Fix state pruning in bpf verifier wrt. alignment, from Daniel
    Borkmann.

 2) Handle non-linear SKBs properly in SCTP ICMP parsing, from Davide
    Caratti.

 3) Fix bit field definitions for rss_hash_type of descriptors in mlx5
    driver, from Jesper Brouer.

 4) Defer slave->link updates until bonding is ready to do a full commit
    to the new settings, from Nithin Sujir.

 5) Properly reference count ipv4 FIB metrics to avoid use after free
    situations, from Eric Dumazet and several others including Cong Wang
    and Julian Anastasov.

 6) Fix races in llc_ui_bind(), from Lin Zhang.

 7) Fix regression of ESP UDP encapsulation for TCP packets, from
    Steffen Klassert.

 8) Fix mdio-octeon driver Kconfig deps, from Randy Dunlap.

 9) Fix regression in setting DSCP on ipv6/GRE encapsulation, from Peter
    Dawson.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  ipv4: add reference counting to metrics
  net: ethernet: ax88796: don't call free_irq without request_irq first
  ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets
  sctp: fix ICMP processing if skb is non-linear
  net: llc: add lock_sock in llc_ui_bind to avoid a race condition
  bonding: Don't update slave->link until ready to commit
  test_bpf: Add a couple of tests for BPF_JSGE.
  bpf: add various verifier test cases
  bpf: fix wrong exposure of map_flags into fdinfo for lpm
  bpf: add bpf_clone_redirect to bpf_helper_changes_pkt_data
  bpf: properly reset caller saved regs after helper call and ld_abs/ind
  bpf: fix incorrect pruning decision when alignment must be tracked
  arp: fixed -Wuninitialized compiler warning
  tcp: avoid fastopen API to be used on AF_UNSPEC
  net: move somaxconn init from sysctl code
  net: fix potential null pointer dereference
  geneve: fix fill_info when using collect_metadata
  virtio-net: enable TSO/checksum offloads for Q-in-Q vlans
  be2net: Fix offload features for Q-in-Q packets
  vlan: Fix tcp checksum offloads in Q-in-Q vlans
  ...

Pull XFS fixes from Darrick Wong:
 "A few miscellaneous bug fixes & cleanups:

   - Fix indlen block reservation accounting bug when splitting delalloc
     extent

   - Fix warnings about unused variables that appeared in -rc1.

   - Don't spew errors when bmapping a local format directory

   - Fix an off-by-one error in a delalloc eof assertion

   - Make fsmap only return inode information for CAP_SYS_ADMIN

   - Fix a potential mount time deadlock recovering cow extents

   - Fix unaligned memory access in _btree_visit_blocks

   - Fix various SEEK_HOLE/SEEK_DATA bugs"

* tag 'xfs-4.12-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: Move handling of missing page into one place in xfs_find_get_desired_pgoff()
  xfs: Fix off-by-in in loop termination in xfs_find_get_desired_pgoff()
  xfs: Fix missed holes in SEEK_HOLE implementation
  xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
  xfs: fix unaligned access in xfs_btree_visit_blocks
  xfs: avoid mount-time deadlock in CoW extent recovery
  xfs: only return detailed fsmap info if the caller has CAP_SYS_ADMIN
  xfs: bad assertion for delalloc an extent that start at i_size
  xfs: fix warnings about unused stack variables
  xfs: BMAPX shouldn't barf on inline-format directories
  xfs: fix indlen accounting error on partial delalloc conversion

Andrey Konovalov reported crashes in ipv4_mtu()

I could reproduce the issue with KASAN kernels, between
10.246.7.151 and 10.246.7.152 :

1) 20 concurrent netperf -t TCP_RR -H 10.246.7.152 -l 1000 &

2) At the same time run following loop :
while :
do
 ip ro add 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
 ip ro del 10.246.7.152 dev eth0 src 10.246.7.151 mtu 1500
done

Cong Wang attempted to add back rt->fi in commit
82486aa6 ("ipv4: restore rt->fi for reference counting")
but this proved to add some issues that were complex to solve.

Instead, I suggested to add a refcount to the metrics themselves,
being a standalone object (in particular, no reference to other objects)

I tried to make this patch as small as possible to ease its backport,
instead of being super clean. Note that we believe that only ipv4 dst
need to take care of the metric refcount. But if this is wrong,
this patch adds the basic infrastructure to extend this to other
families.

Many thanks to Julian Anastasov for reviewing this patch, and Cong Wang
for his efforts on this problem.

Fixes: 2860583f ("ipv4: Kill rt->fi")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The function ax_init_dev (which is called only from the driver's .probe
function) calls free_irq in the error path without having requested the
irq in the first place. So drop the free_irq call in the error path.

Fixes: 825a2ff1 ("AX88796 network driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fix addresses two problems in the way the DSCP field is formulated
 on the encapsulating header of IPv6 tunnels.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195661

1) The IPv6 tunneling code was manipulating the DSCP field of the
 encapsulating packet using the 32b flowlabel. Since the flowlabel is
 only the lower 20b it was incorrect to assume that the upper 12b
 containing the DSCP and ECN fields would remain intact when formulating
 the encapsulating header. This fix handles the 'inherit' and
 'fixed-value' DSCP cases explicitly using the extant dsfield u8 variable.

2) The use of INET_ECN_encapsulate(0, dsfield) in ip6_tnl_xmit was
 incorrect and resulted in the DSCP value always being set to 0.

Commit 90427ef5 ("ipv6: fix flow labels when the traffic class
 is non-0") caused the regression by masking out the flowlabel
 which exposed the incorrect handling of the DSCP portion of the
 flowlabel in ip6_tunnel and ip6_gre.

Fixes: 90427ef5 ("ipv6: fix flow labels when the traffic class is non-0")
Signed-off-by: Peter Dawson <peter.a.dawson@boeing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sometimes ICMP replies to INIT chunks are ignored by the client, even if
the encapsulated SCTP headers match an open socket. This happens when the
ICMP packet is carried by a paged skb: use skb_header_pointer() to read
packet contents beyond the SCTP header, so that chunk header and initiate
tag are validated correctly.

v2:
- don't use skb_header_pointer() to read the transport header, since
  icmp_socket_deliver() already puts these 8 bytes in the linear area.
- change commit message to make specific reference to INIT chunks.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a race condition in llc_ui_bind if two or more processes/threads
try to bind a same socket.

If more processes/threads bind a same socket success that will lead to
two problems, one is this action is not what we expected, another is
will lead to kernel in unstable status or oops(in my simple test case,
cause llc2.ko can't unload).

The current code is test SOCK_ZAPPED bit to avoid a process to
bind a same socket twice but that is can't avoid more processes/threads
try to bind a same socket at the same time.

So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect.
Signed-off-by: Lin Zhang <xiaolou4617@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into this series. This contains:

   - A set of NVMe fixes, pulled from Christoph. This includes a set of
     fixes for the fiber channel bits from James Smart, rdma queue depth
     fix from Marta, controller removal fixes from Ming, and some more
     APST quirk updates from Andy.

   - A blk-mq debugfs fix from Bart, fixing a problem with the
     untangling of the sysfs and debugfs blk-mq bits that was added in
     this series.

   - Error code fix in add_partition() from Dan.

   - A small series of fixes for the new blk-throttle code from Shaohua"

* 'for-linus' of git://git.kernel.dk/linux-block: (21 commits)
  blk-mq: Only register debugfs attributes for blk-mq queues
  nvme: Quirk APST on Intel 600P/P3100 devices
  nvme: only setup block integrity if supported by the driver
  nvme: replace is_flags field in nvme_ctrl_ops with a flags field
  nvme-pci: consistencly use ctrl->device for logging
  partitions/msdos: FreeBSD UFS2 file systems are not recognized
  block: fix an error code in add_partition()
  blk-throttle: force user to configure all settings for io.low
  blk-throttle: respect 0 bps/iops settings for io.low
  blk-throttle: output some debug info in trace
  blk-throttle: add hierarchy support for latency target and idle time
  nvme_fc: remove extra controller reference taken on reconnect
  nvme_fc: correct nvme status set on abort
  nvme_fc: set logging level on resets/deletes
  nvme_fc: revise comment on teardown
  nvme_fc: Support ctrl_loss_tmo
  nvme_fc: get rid of local reconnect_delay
  blk-mq: remove blk_mq_abort_requeue_list()
  nvme: avoid to use blk_mq_abort_requeue_list()
  nvme: use blk_mq_start_hw_queues() in nvme_kill_queues()
  ...

Pull PCI fixes from Bjorn Helgaas:

 - fix PCI_ENDPOINT build error (merged for v4.12)

 - fix Switchtec driver (merged for v4.12)

 - fix imx6 config read timeouts, fallout from changing to non-postable
   reads

 - add PM "needs_resume" flag for i915 suspend issue

* tag 'pci-v4.12-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/PM: Add needs_resume flag to avoid suspend complete optimization
  PCI: imx6: Fix config read timeout handling
  switchtec: Fix minor bug with partition ID register
  switchtec: Use new cdev_device_add() helper function
  PCI: endpoint: Make PCI_ENDPOINT depend on HAS_DMA

Pul ceph fixes from Ilya Dryomov:
 "A bunch of make W=1 and static checker fixups, a RECONNECT_SEQ
  messenger patch from Zheng and Luis' fallocate fix"

* tag 'ceph-for-4.12-rc3' of git://github.com/ceph/ceph-client:
  ceph: check that the new inode size is within limits in ceph_fallocate()
  libceph: cleanup old messages according to reconnect seq
  libceph: NULL deref on crush_decode() error path
  libceph: fix error handling in process_one_ticket()
  libceph: validate blob_struct_v in process_one_ticket()
  libceph: drop version variable from ceph_monmap_decode()
  libceph: make ceph_msg_data_advance() return void
  libceph: use kbasename() and kill ceph_file_part()

Pull MMC fixes from Ulf Hansson:
 "This contains fixes to make the WiFi work again for the ARM64 Hikey
  board.

  Together with a couple of DTS updates for the Hikey board we have also
  extended the mmc pwrseq_simple, to support a new power-off-delay-us DT
  property, as that was required to enable a graceful power off sequence
  for the WiFi chip"

* tag 'mmc-v4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  arm64: dts: hikey: Fix WiFi support
  arm64: dts: hi6220: Move board data from the dwmmc nodes to hikey dts
  arm64: dts: hikey: Add the SYS_5V and the VDD_3V3 regulators
  arm64: dts: hi6220: Move the fixed_5v_hub regulator to the hikey dts
  arm64: dts: hikey: Add clock for the pmic mfd
  mfd: dts: hi655x: Add clock binding for the pmic
  mmc: pwrseq_simple: Parse DTS for the power-off-delay-us property
  mmc: dt: pwrseq-simple: Invent power-off-delay-us

Pull sound fixes from Takashi Iwai:
 "This contains a few HD-audio device-specific quirks and an endianess
  fix for USB-audio, as well as the update of quirk model list document.
  All fixes are small and trivial.

  The document update could have been postponed, but it's a good thing
  for user and has absolutely zero risk of breakage, so included here"

* tag 'sound-4.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - apply STAC_9200_DELL_M22 quirk for Dell Latitude D430
  ALSA: hda - Update the list of quirk models
  ALSA: hda - Provide dual-codecs model option for a few Realtek codecs
  ALSA: hda - Apply dual-codec quirk for MSI Z270-Gaming mobo
  ALSA: hda - No loopback on ALC299 codec
  ALSA: usb-audio: fix Amanero Combo384 quirk on big-endian hosts

Pull drm fixes from Dave Airlie:
 "Not a whole lot happening here, a set of amdgpu fixes and one core
  deadlock fix, and some misc drivers fixes"

* tag 'drm-fixes-for-v4.12-rc3' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: fix null point error when rmmod amdgpu.
  drm/amd/powerplay: fix a signedness bugs
  drm/amdgpu: fix NULL pointer panic of emit_gds_switch
  drm/radeon: Unbreak HPD handling for r600+
  drm/amd/powerplay/smu7: disable mclk switching for high refresh rates
  drm/amd/powerplay/smu7: add vblank check for mclk switching (v2)
  drm/radeon/ci: disable mclk switching for high refresh rates (v2)
  drm/amdgpu/ci: disable mclk switching for high refresh rates (v2)
  drm/amdgpu: fix fundamental suspend/resume issue
  drm/gma500/psb: Actually use VBT mode when it is found
  drm: Fix deadlock retry loop in page_flip_ioctl
  drm: qxl: Delay entering atomic context during cursor update
  drm/radeon: Fix oops upon driver load on PowerXpress laptops

We need to return an error for any call that asks for MSI / MSI-X
vectors only, so that non-trivial fallback logic can work properly.

Also valid dev->irq and use the "correct" errno value based on feedback
from Linus.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Fixes: aff17164 ("PCI: Provide sensible IRQ vector alloc/free routines")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Christoph writes:

"A couple of fixes for the next rc on the nvme front. Various FC fixes
from James, controller removal fixes from Ming (including a block layer
patch), a APST related device quirk from Andy, a RDMA fix for small
queue depth device from Marta, as well as fixes for the lack of
metadata support in non-PCIe drivers and the printk logging format from
me."