Replace all usage of hard coded values with
the proper field from the board profile.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Now the board values match the hard coded
constants used in the dvb initialization.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Despite never getting called from atomic context,
usb URB memory allocations use GFP_ATOMIC, which does not sleep
for allocation.

GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
which can sleep and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

[mchehab+samsung@kernel.org: merged 3 similar patches into one]
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

As warned by smatch:
	drivers/media/pci/pt1/pt1.c:213 config_demod() error: strncmp() '"tc90522sat"' too small (11 vs 20)

Use the same strncmp() syntax as pt1_init_frontends() does.
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

As described in Document/timers/timers-howto.txt,
hrtimer-based delay should be used for small sleeps.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Without this patch, re-loading of the module was required after resume.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

earth-pt1 was a monolithic module and included demod/tuner drivers.
This patch removes those FE parts and  attach demod/tuner i2c drivers.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The tuner is used in Earthsoft PT1/PT2 DVB boards,
and  the driver was extraced from (the former) va1j5jf8007s.c of PT1.
it might contain PT1 specific configs.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch adds a PLL "description" of Philips TDA6651 for ISDB-T.
It was extracted from (the former) va1j5jf8007t.c of EarthSoft PT1,
thus the desc might include PT1 specific configs.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

i2c message buf might be on stack.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

As the kernel doc "timers-howto.txt" reads,
short delay with msleep() can take much longer.
In a case of raspbery-pi platform where CONFIG_HZ_100 was set,
it actually affected the init of Friio devices
since it issues lots of i2c transactions with short delay.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

This driver already contains tua6034-based device settings,
but they are not for ISDB-T and have different parameters.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

registers the module as an i2c driver,
but keeps dvb_pll_attach() untouched for compatibility.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Instead of using printk() directly, use the pr_foo()
macros.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Propagate the v4l2_mbus_framefmt to the source pad when either a sink
pad is activated or when the format of the active sink pad changes.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch resolves the following checkpatch.pl error:
    ERROR: that open brace { should be on the previous line
Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch resolves checkpatch.pl warnings:
    WARNING: Block comments use * on subsequent lines
    WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch resolves checkpatch.pl errors:
    ERROR: space required after that ',' (ctx:VxV)
Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch resolves a checkpatch.pl warning:
    WARNING: sizeof *cap should be sizeof(*cap)
Signed-off-by: Nasser Afshin <Afshin.Nasser@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

When capturing at yuv410p, sg_next was called too many times when chroma is
false, eventually returning NULL. This patch does fix this for my hardware.
Signed-off-by: Samuel Williams <sam8641@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

DTV_ISDBT_LAYER_ENABLED parameter should be set to "All" by default,
instead of "None", as described in the API document.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

GIT_AUTHOR_NAME=Akihiro TSUKADA
GIT_AUTHOR_EMAIL=tskd08@gmail.com

they were obviously wrong.
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Structure i2c_driver does not need to set the owner field, as this will
be populated by the driver core.

Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci.

Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Structure i2c_driver does not need to set the owner field, as this will
be populated by the driver core.

Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci.

Cc: Shunqian Zheng <zhengsq@rock-chips.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Messages expected during device probe were being marked as errors.
Signed-off-by: Chris Mayo <aklhfex@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Such check is already there at the routine. So, no need to
repeat it outside.

Cc: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

This patch slightly simplifies the binding code by introducing commit
8f569c0b ("media: dvb-core: add helper functions for I2C binding").
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Newer DVB receivers of this type have a different USB PID.
Signed-off-by: Rainer Keller <mail@rainerkeller.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Three really tiny minors in this single commit which all on their own
would just clutter up the commit history unnecessarily:

* ddbridge-regs.h is lacking an include guard. Add it.
* Fix an unnecessary NULL initialisation in ddbridge-ci. The declaration
  of the ci struct ptr is immediately followed by kzalloc().
* Clarify that the CXD2099AR is a Sony device in the cxd2099 driver at a
  few places including Kconfig.
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Acked-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

The -Warray-bounds warning in gcc-8 triggers for a newly added file:

drivers/media/spi/cxd2880-spi.c: In function 'cxd2880_write_reg':
drivers/media/spi/cxd2880-spi.c:111:3: error: 'memcpy' forming offset [133, 258] is out of the bounds [0, 132] of object 'send_data' with type 'u8[132]' {aka 'unsigned char[132]'} [-Werror=array-bounds]

The problem appears to be that we have two range checks in this function,
first comparing against BURST_WRITE_MAX (128) and then comparing against
a literal '255'. The logic checking the buffer size looks at the second
one and decides that this might be the actual maximum data length.

This is understandable behavior from the compiler, but the code is actually
safe. Since the first check is already shorter, we can remove the loop
and only leave that. To be on the safe side in case BURST_WRITE_MAX might
be increased, I'm leaving the check against U8_MAX.

Fixes: bd24fcdd ("media: cxd2880-spi: Add support for CXD2880 SPI interface")

Cc: Martin Sebor <msebor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

If state is not initialized or is freed, we can't use it:
	drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: potential null dereference 'state'.  (kzalloc returns null)
	drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: we previously assumed 'state' could be null (see line 878)
	drivers/media/dvb-frontends/lgdt330x.c:920 lgdt330x_probe() error: dereferencing freed memory 'state'

Fixes: 23ba635d ("media: lgdt330x: convert it to the new I2C binding way")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Show the UCB error counts via DVBv5.

Please notice that there's no scale indication at the driver.
As we don't have the datasheet, let's assume that it is receiving
data at a rate of 10.000 packets per second. Ideally, this should
be read or estimated.

In order to avoid flooding I2C bus with data, the maximum
polling rate for those stats was set to 1 second.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

This routine does nothing. Remove it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

Change the logic at the driver to provide CNR stats via
DVBv5 API.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

In preparation to implement DVBv5 stats on this driver, move
the *read_status functions to happen after SNR and signal
strength routines.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

There are several register init arrays there that can be
constified.

The change reduced a little bit the amount of initialized
data:

   text	   data	    bss	    dec	    hex	filename
   6372	    360	      4	   6736	   1a50	old/drivers/media/dvb-frontends/lgdt330x.o
   6500	    264	      4	   6768	   1a70	new/drivers/media/dvb-frontends/lgdt330x.o
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>