- 02 Apr, 2006 37 commits
-
-
Ingo Schneider authored
- Issue a warning when more than 80% of the DMA buffer is being used (probably due to bad IRQ latency). Warnings are rate-limited. - Introduce a new parameter 'bufsize' (in KByte) which increases the default DMA buffer of 188 KByte up to 1410 KByte (Activy: 564 KByte). Signed-off-by: Ingo Schneider <mail@ingo-schneider.de> Signed-off-by: Oliver Endriss <o.endriss@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- Move documentation for usb v4l devices from Documentation/usb to Documentation/video4linux. - Removed trailing whitespace. - Update Kconfig help text links to reflect the new file locations. Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
It should be V4L2_TUNER_MODE_LANG1_LANG2. What the code does is check if we are NTSC and a SAP channel is available. If so, then the msp3400 should switch to standard 0x21 if the user wants to hear the SAP channel, which is for audio modes LANG2 (aka SAP) and LANG1_LANG2 (bilingual). In the msp3400 driver STEREO is abused for bilingual in PAL. Bilingual never worked with NTSC in the past and I decided that I'd better not use the bad PAL example. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
- Add support for the uPD64031A NEC Electronics Ghost Reduction i2c device - Add support for the uPD6408x NEC Electronics 3-Dimensional Y/C separation i2c device. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Takeru Komoriya <komoriya@paken.org> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
- The wait time until the first time the audio mode was detected was 1+5=6 seconds instead of just 1 second (wrong statement order). msp3400c specific bug. - Implemented audio mode fallback for msp3400c/d just like the msp3400g does automatically. E.g. fallback to stereo if no second language exists, etc. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
The driver tried to set a register that is not present on msp3400c devices. Add the missing test. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Add support for the Wolfson Microelectronics WM8739 stereo A/D converter from the ivtv driver. Many thanks to Takahiro Adachi for writing the original driver. Signed-off-by: Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Trent Piepho authored
- Fixed PCI ID typo in VIDEO_CX88_ALSA help text Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Trent Piepho authored
- Added firmware download comments to or51211 and or51132 Kconfig help text. Signed-off-by: Trent Piepho <xyzzy@speakeasy.org> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Patrick Boettcher authored
There seems to be a new version of the USB DVB-T stick from WideView with a new demod-revision inside and thus a new firwmare. This patch enables support for that. Thanks to Mikel Martin for early testing. Signed-off-by: Patrick Boettcher <pb@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- removed redundant Video For Linux API help text - fixed dependency / selection for USB_W9968CF Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Hackmann authored
There seem to be many variants of this cards with different feature sets. This entry supports analog TV, CVBS and s-video input, FM radio and DVB-T if they are supported by the hardware. Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Hackmann authored
The .vmux entry needs to be 1 instead of 0 Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hartmut Hackmann authored
Added ID entries for the Genius VideoWonder DVB-T and the LifeView FlyTV Platinum Gold Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Default values were wrong. Fixing it. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mike Isely authored
The FWSEND parameter controls the size of the firmware chunks sent down the I2C bus to the chip. Previously this had been set to 1024 but unfortunately some I2C implementations can't transfer data in such big gulps. Specifically, the pvrusb2 driver has a hard limit of around 60 bytes, due to the encapsulation there of I2C traffic into USB messages. So we have to significantly reduce this parameter. Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Thanks to: Andrew Cohen <cohen@andy.bu.edu> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Ricardo Cerqueira authored
After the recent video-buf "generic" adaptation, the PCI wrappers got completely broken, and all of the DMA sound modules stopped working (and failed with an oops) Signed-off-by: Ricardo Cerqueira <v4l@cerqueira.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
- Added keycodes for the DViCO FusionHDTV portable remote control. - Enabled the remote control for both versions of FusionHDTV DVB-T USB and the FusionHDTV 5 USB Gold (ATSC) Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
maximilian attems authored
The bt8xx drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: maximilian attems <maks@sternwelten.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Randy Dunlap authored
one printk needs a newline at end; better MODULE_PARM_DESC text formatting; don't need to init static data to 0; Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
maximilian attems authored
The saa7134 drivers uses request_firmware() and thus needs to select FW_LOADER. Signed-off-by: maximilian attems <maks@sternwelten.at> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
Hans Verkuil authored
- Add missing class check to tveeprom_attach_adapter. - Add CX2341X specific IR probe address list. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-
- 01 Apr, 2006 3 commits
-
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-serial: [SERIAL] Allow 8250 PCI, PNP, GSC and HP300 support to be disabled
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-mmc: [MMC] Pass -DDEBUG on compiler command line if MMC_DEBUG selected [MMC] Add OMAP MMC host driver
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 3424/2: ixp23xx: fix uncompress.h for recent CRLF decompressor change [ARM] 3434/1: pxa i2s amsl define [ARM] 3425/1: xsc3: need to include pgtable-hwdef.h [ARM] Allow un-muxed syscalls to be available for everyone [ARM] 3420/1: Missing clobber in example code [ARM] nommu: fixups for the exception vectors [ARM] nommu: add nommu specific Kconfig and MMUEXT variable in Makefile [ARM] nommu: start-up code [ARM] nommu: MPU support in boot/compressed/head.S
-