- 23 Jun, 2017 1 commit
-
-
Mauro Carvalho Chehab authored
Since 2015, the documentation for FE_DISEQC_SEND_BURST, FE_SET_TONE and FE_SET_VOLTAGE are incorrectly saying that the enums are passed by reference. They aren't: they're passed by value. Fix the documentation to reflect reality. Fixes: 81959d99 ("[media] DocBook: better document FE_DISEQC_SEND_BURST ioctl") Fixes: d6b6d346 ("[media] DocBook: better document FE_SET_VOLTAGE ioctl") Fixes: 6dc59e7a ("[media] DocBook: better document FE_SET_TONE ioctl") Reported-by:
Thierry Lelegard <thierry.lelegard@free.fr> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 20 Jun, 2017 39 commits
-
-
Arnd Bergmann authored
'struct video_event' is used for the VIDEO_GET_EVENT ioctl, implemented by drivers/media/pci/ivtv/ivtv-ioctl.c and drivers/media/pci/ttpci/av7110_av.c. The structure contains a 'time_t', which will be redefined in the future to be 64-bit wide, causing an incompatible ABI change for this ioctl. As it turns out, neither of the drivers currently sets the timestamp field, and it is presumably useless anyway because of the limited resolutions (no sub-second times). This means we can simply change the structure definition to use a 'long' instead of 'time_t' and remain compatible with all existing user space binaries when time_t gets changed. If anybody ever starts using this field, they have to make sure not to use 1970 based seconds in there, as those overflow in 2038. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Stanimir Varbanov authored
We want all media drivers to build with COMPILE_TEST, as the Coverity instance we use on Kernel works only for x86. Also, our test workflow relies on it, in order to identify git bisect breakages. Signed-off-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org>
-
Antti Palosaari authored
Move power-up and power-down functionality to init/sleep ops and get rid of old function. Fixes and simplifies power-up functionality slightly. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Antti Palosaari authored
Refactor firmware download routine. Signed-off-by:
-
Antti Palosaari authored
We need to wait 2nd demod power-up before download firmware. Move that wait to more correct location. Signed-off-by:
-
Antti Palosaari authored
Removed register writes are already chip defaults, are not required, are set later or belong to AF9015 USB interface. Signed-off-by:
-
Antti Palosaari authored
On serial TS mode output pin could be selected from D0 or D7. Add configuration option to for it. Rename TS mode config option prefix from AF9013_TS_ to AF9013_TS_MODE_. Signed-off-by:
-
Antti Palosaari authored
It needs to be enabled in order to get stream from slave af9013 demod. Signed-off-by:
-
Antti Palosaari authored
* fix write+read when write has more than one byte * remove lock, not needed on that case * remove useless i2c msg send loop, as we support only write, read and write+read as one go and nothing more Signed-off-by:
-
Antti Palosaari authored
Add support for DVBv5 CNR. Signed-off-by:
-
Antti Palosaari authored
Use typical (return 0/goto err/return err) error handling everywhere. Add missing error handling where missing. Signed-off-by:
-
Antti Palosaari authored
Use regmap for register access. Own low level i2c read and write routines for regmap is still needed because chip uses single command byte in addition to typical i2c register access. Signed-off-by:
-
Antti Palosaari authored
We can simplify logging as we now have a proper i2c client to pass for kernel dev_* logging functions. Signed-off-by:
-
Antti Palosaari authored
Replace own binary division with 64-bit multiply and division. Signed-off-by:
-
Antti Palosaari authored
Add kernel i2c driver bindings. That allows dev_* logging, regmap and more. Signed-off-by:
-
Antti Palosaari authored
It shorten, as typed chars, access to config values as there is one pointer less. Also, when config/platform data is passed to driver there could be some values that are not relevant to store state as such or not needed to store at all. Signed-off-by:
-
Antti Palosaari authored
Driver was using wrong "8-bit" i2c addresses for demods and tuners. Internal demod i2c address was not set at all. These are needed to be fixed before proper i2c client binding is used. Signed-off-by:
-
Gustavo A. R. Silva authored
Check return value from call to af9013_wr_regs(), so in case of error print debug message and return. Addresses-Coverity-ID: 1227035 Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
-
Daniel Scheller authored
Adds hardware IDs for all Sony CXD-based Cine-cards and MaxA8 devices, also adds some other yet missing IDs like the Octopus V3, Octopus OEM and Octopus Mini, as well as cards with unknown/deleted sub-ids. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Daniel Scheller authored
Properly detect and attach Ports and Flex modules with the Sony CXD28xxER series demods. This makes newer Cine cards and most DuoFlex C/C2/T/T2 (or any combination of these systems) work, PCI IDs need to be added though. Note: This utilises the CXD2841ER demod driver, which requires the changes from this patch series to properly work. Without those changes, it won't function properly (if at all). Signed-off-by:
-
Daniel Scheller authored
Some Flex modules (mostly with anyof C/C2/T/T2 demods based on the Sony CXD28xxER series) are equipped with an interface named XO2 (which appears to be the Lattice MachXO2). Add functionality to detect such links and initialise them, so any tuner module with such an interface can be used. This also adds dummy detection for any possible connected module, telling the user it isn't supported at this very moment. Also adds i2c_io(), i2c_write() and i2c_write_reg(), all required for the XO2 handling functionality. Signed-off-by:
-
Daniel Scheller authored
This is a backport of the board control setup from the vendor provided dddvb driver package, which does additional device initialisation based on the board_control device info values. Also backports the TS quirk flags which is used to control setup and usage of the tuner modules soldered on the bridge cards (e.g. CineCTv7, CineS2 V7, MaxA8 and the likes). Functionality originates from ddbridge vendor driver. Permission for reuse and kernel inclusion was formally granted by Ralph Metzler <rjkm@metzlerbros.de>. Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Daniel Scheller authored
On DVB-T/T2 at least, SNR might be reported as >2500dB, which not only is just wrong but also ridiculous, so fix this by improving the conversion of the register value. The INTLOG10X100 function/macro and the way the values are converted were both taken from DD's cxd2843 driver. Signed-off-by:
Abylay Ospan <aospan@netup.ru> Signed-off-by:
-
Daniel Scheller authored
Bits 3 and 4 of the TSCONFIG register are important for certain hardware constellations, in that they need to be zeroed. Add a configuration flag to toggle this. Signed-off-by:
-
Daniel Scheller authored
Adds a flag to enable or disable the IFAGCNEG bit in cxd2841er_init_tc(). Signed-off-by:
-
Daniel Scheller authored
Don't wait for FE_HAS_LOCK in set_frontend_tc() and thus don't hammer the lock status register with inquiries when CXD2841ER_NO_WAIT_LOCK is set in the configuration, which also unneccessarily blocks applications until a TS LOCK has been acquired. Rather, API and applications will check for a TS LOCK by utilising the tune fe_op, read_status and get_frontend ops, which is sufficient. Signed-off-by:
-
Daniel Scheller authored
When AUTO_IFHZ is set and the tuner is supposed to provide proper IF speed values, it should be possible to have the tuner setup take place before the demod is configured, else the demod might be configured with either wrong (old), or even no values at all, which obviously will cause issues. To set this behaviour in the most flexible way, this is done with a separate flag instead of making this depend on AUTO_IFHZ. It should be evaluated if tuning shouldn't take place earlier in all cases and hardware constellations. Signed-off-by:
-
Daniel Scheller authored
The Sony CXD28xx demods may have other tuner types attached to them (e.g. NXP TDA18212), so don't mandatorily configure and enable the ASCOT functionality, but make this conditional by a config flag. Signed-off-by:
-
Daniel Scheller authored
Some constellations work/need a serial TS transport mode. This adds a flag that will toggle set up of such mode. Signed-off-by:
-
Daniel Scheller authored
Add a AUTO_IFHZ flag and a function that will read IF speed values from any attached tuner if the tuner supports this and if AUTO_IFHZ is enabled, and else the passed default value (which probably matches Sony ASCOT tuners) will be passed back. The returned value is then used to calculate the iffeq which the demod will be programmed with. Signed-off-by:
-
Daniel Scheller authored
Some cards/bridges wrap i2c_gate_ctrl handling with a mutex_lock(). This is e.g. done in ddbridge to protect against concurrent tuner access with regards to the dual tuner HW, where concurrent tuner reconfiguration can result in tuning fails or bad reception quality. When the tuner driver additionally tries to open the I2C gate (which e.g. the tda18212 driver does) when the demod already did this, this will lead to a deadlock. This makes the calls to i2c_gatectrl from the demod driver optional when the flag is set, leaving this to the tuner driver. For readability reasons and to not have the check duplicated multiple times, the setup is factored into cxd2841er_tuner_set(). This commit also updates the netup card driver (which seems to be the only consumer of the cxd2841er as of now). Signed-off-by:
-
Daniel Scheller authored
Throughout the patch series some configuration flags will be added to the demod driver. This patch prepares this by adding the flags var to struct cxd2841er_config, which will serve as a bitmask to toggle various options and behaviour in the driver. Signed-off-by:
-
Daniel Scheller authored
The way the MAKE_IFFREQ_CONFIG macros are written make it impossible to pass regular integers for iffreq calculation, since this will cause "SSE register return with SSE disabled" compile errors. This changes the calculation into C functions which also might help when debugging. Also, expand all passed frequencies from MHz to Hz scale. Signed-off-by:
-
Daniel Scheller authored
Those demods are programmed in the same way as the CXD2841ER/54ER and can be handled by this driver. Support added in a way matching the existing code, supported delivery systems are set according to what each demod supports. Updates the type string setting used for printing the "attaching..." log line aswell. Signed-off-by:
-
Daniel Scheller authored
Do unfreeze_regs() directly when accessing the demod registers is done, and don't have multiple unfreeze's on different conditions, which even can get prone to errors. Signed-off-by:
-
Daniel Scheller authored
Doing the I2C read operation with two calls to i2c_transfer() causes the exclusive I2C bus lock of the underlying adapter to be released. While this isn't an issue if only one demodulator is attached to the bus, having two or even more causes troubles in that concurrent accesses to the different demods will cause all kinds of issues due to wrong data being returned on read operations (for example, the TS config register will be set wrong). This changes the read_regs() function to do the operation in one go (by calling i2c_transfer with the whole msg list instead of one by one) to not loose the I2C bus lock, fixing all sorts of random runtime failures. Signed-off-by:
-
Daniel Scheller authored
This moves the I2C debug dump into the preceding dev_dbg() call by utilising the %*ph format macro and removes the call to print_hex_debug_bytes(). Signed-off-by:
-
Daniel Scheller authored
This adds detection and activation for STV0367-based tuner hardware (namely CineCTv6 bridge cards and older DuoFlex CT addon modules). Utilises the extended stv0367 demod driver. TDA18212 i2c_client/regmap-api code was originally implemented by Antti Palosaari <crope@iki.fi> in a variant to update the ddbridge code from the vendor dddvb package (formal ack for these parts received). Original patch at [1]. When boards with STV0367 are cold-started, there might be issues with the I2C gate, causing the TDA18212 detection/probe to fail. For these demods, a workaround (tuner_tda18212_ping) is implemented which probes the tuner twice on this hardware constellation which will resolve the problem and put all components into a working state. Other demod/port types won't be retried. [1] https://patchwork.linuxtv.org/patch/25146/Signed-off-by:
-
Daniel Scheller authored
Adds new i2c_read_regs() function and make i2c_read_reg() wrap into this with len=1. Required for the tuner_tda18212_ping() and XO2 handling functions (part of the Sony CXD28xx support patch series). Signed-off-by:
-
