On this model, when KBD is in active multiplexing mode, acknowledgements
to reset and get ID commands issued on KBD port sometimes are delivered
to AUX3 port (touchpad) which messes up device detection. Legacy KBC
mode works fine and since there are no external PS/2 ports on this laptop
and no support for docking station we can safely disable active MUX mode.
Tested-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

input_devices_seq_start() uses mutex_lock_interruptible() to acquire
the input_mutex, but doesn't properly handle the situation when the
call fails (for example due to interrupt). Instead of returning NULL
(which indicates that there is no more data) we should return
ERR_PTR()-encoded error.

We also need explicit flag indicating whether input_mutex was acquired
since input_devices_seq_stop() is called whether input_devices_seq_start()
was successful or not.

The same applies to input_handlers_seq_start().
Reported-by: iceberg <strakh@ispras.ru>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

We need to postpone restoring LED state and typematic settings until
keyboard is finished reconnecting upon resume. Normally driver core
and PM infrastructure takes care of proper ordering and dependencies,
but or case actual reconnect is done asynchronously from kseriod.
So while driver core thinks that keyboard was resumed and it is time
to let input core run it's resume handlers in reality keyboard is not
ready yet. The solution is to keep rescheduling work that adjusts LED
and rate settings until keyboard is fully enabled.
Reported-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Fix breakage caused by commit 9605fb48
While the input core indeed takes care of restoring led state and
typematic settings upon resume the driver still need to initialize
them properly when registering a new device
Reported-and-tested-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

This small snippet escaped last round of int -> bool conversion.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Apparently some of Toshiba Protege M300 identify themselves as
"Portable PC" in DMI so we need to add that to the DMI table as
well. We need DMI data so we can automatically lower Synaptics
reporting rate from 80 to 40 pps to avoid over-taxing their
keyboard controllers.
Tested-by: Rod Davison <roddavison@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Sometimes it is not clear why IRQ delivery test failed so let's
add some debug printks so we know the exact reason.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

libps2 can not be built in if i8042 is a module, all other combinations
are allowed.
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The original driver was written with the KEY() macro defined as (col,
row) instead of (row, col) as defined by the matrix keypad
infrastructure. So the keymap was defined accordingly. Since the
driver that was merged upstream uses the matrix keypad infrastructure,
modify the keymap accordingly.

While we are at it, fix the comments in twl4030.h and define
PERSISTENT_KEY as (r,c) instead of (c, r)

Tested on a RX51 (N900) device.
Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

If the sub-probe functions fail, we need to pass up the error code to the
higher levels from the probe function.  We currently always return 0 even
if there was an error so higher levels don't report problems.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Add BigBen Interactive XBOX 360 Controller (146b:0601) to xpad driver.
Signed-off-by: Thomas Gruber <kerneldev@tuxpower.org>
Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

When the rotart_encoder driver is used to report relative axis
information the "steps" in the platform data could be missing
since it's not relevant.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The function bbc_remove and grover_remove are used only wrapped
by __devexit_p so define it using __devexit.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Signed-off-by: Sebastian Frei <dr.nop@gmx.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

This version only supports individual cells (no slide support yet).
The code has been tested on proprietary development ARM board, but
should work fine on other machines.
Signed-off-by: Raphael Derosso Pereira <raphaelpereira@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Convert max7359 driver to use IRQ threading instead of using
workqueue.
Tested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The Maxim MAX7359 is a I2C interfaced key switch controller which
provides microprocessors with management of up to 64 key switches.
This patch adds support for the MAX7359 key switch controller.
Signed-off-by: Kim Kyuwon <q1.kim@samsung.com>
Reviewed-by: Trilok Soni <soni.trilok@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The MELPAS MCS-5000 is the touchscreen controller. The overview of this
controller can see at the following website:

http://www.melfas.com/product/product01.asp?k_r=eng_

This driver is tested on s3c6410 NCP board and supports only the i2c
interface.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Driver for the keyboard hardware documented here:
	http://www.opencores.org/project,keyboardcontrollerSigned-off-by: Javier Herrero <jherrero@hvsistemas.es>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The genirq already provides default hard IRQ handler for threaded
IRQs, no need to implement our own here.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

cancel_delayed_work() may spin and therefore should not be used in
interrupt contexts.
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The AD7889 is a new part but 100% software compatible with the AD7879, so
add it to the id_table and help text.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Now that input core takes care of restoring state of input devices
upon resume we don't need to do anything special here.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

Automatically turn off leds and sound effects as part of suspend
process and restore led state, sounds and repeat rate at resume.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

The serio ports on i8042 are not completely isolated; while we provide
enough locking to ensure proper serialization when accessing control
and data registers AUX and KBD ports can still have an effect on each
other on PS/2 protocol level. The most prominent effect is that
issuing a command for the device connected to one port may cause
abort of the command currently executing by the device connected to
another port.

Since i8042 nor serio subsystem are not aware of the details of the
PS/2 protocol (length of the commands and their replies and so on) the
locking should be done on libps2 level by adding special handling when
we see that we are dealing with serio port on i8042.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
  ide: fixup for fujitsu disk
  ide: convert to ->proc_fops
  at91_ide: remove headers specific for at91sam9263
  IDE: palm_bk3710: convert clock usage after clkdev conversion
  ide: fix races in handling of user-space SET XFER commands
  ide: allow ide_dev_read_id() to be called from the IRQ context
  ide: ide-taskfile.c fix style problems
  drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
  ide-tape: fix handling of postponed rqs
  ide-tape: convert to ide_debug_log macro
  ide-tape: fix debug call
  ide: Fix annoying warning in ide_pio_bytes().
  IDE: Save a call to PageHighMem()

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits)
  powerpc/nvram: Enable use Generic NVRAM driver for different size chips
  powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline
  powerpc/ps3: Workaround for flash memory I/O error
  powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead
  powerpc/perf_counters: Reduce stack usage of power_check_constraints
  powerpc: Fix bug where perf_counters breaks oprofile
  powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops
  powerpc/irq: Improve nanodoc
  powerpc: Fix some late PowerMac G5 with PCIe ATI graphics
  powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT
  powerpc/book3e: Add missing page sizes
  powerpc/pseries: Fix to handle slb resize across migration
  powerpc/powermac: Thermal control turns system off too eagerly
  powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()
  powerpc/405ex: support cuImage via included dtb
  powerpc/405ex: provide necessary fixup function to support cuImage
  powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
  powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
  powerpc/44x: Update Arches defconfig
  powerpc/44x: Update Arches dts
  ...

Fix up conflicts in drivers/char/agp/uninorth-agp.c

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
  powerpc64: convert to dynamic percpu allocator
  sparc64: use embedding percpu first chunk allocator
  percpu: kill lpage first chunk allocator
  x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
  percpu: update embedding first chunk allocator to handle sparse units
  percpu: use group information to allocate vmap areas sparsely
  vmalloc: implement pcpu_get_vm_areas()
  vmalloc: separate out insert_vmalloc_vm()
  percpu: add chunk->base_addr
  percpu: add pcpu_unit_offsets[]
  percpu: introduce pcpu_alloc_info and pcpu_group_info
  percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
  percpu: add @align to pcpu_fc_alloc_fn_t
  percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
  percpu: drop @static_size from first chunk allocators
  percpu: generalize first chunk allocator selection
  percpu: build first chunk allocators selectively
  percpu: rename 4k first chunk allocator to page
  percpu: improve boot messages
  percpu: fix pcpu_reclaim() locking
  ...

Fix trivial conflict as by Tejun Heo in kernel/sched.c

Due to problems at cam.org, my nico@cam.org email address is no longer
valid.  FRom now on, nico@fluxnic.net should be used instead.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Fix buffer overflow in perf_copy_attr()

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (213 commits)
  V4L/DVB (12720): em28xx-cards: Add vendor/product id for Kworld DVD Maker 2
  V4L/DVB (12713): em28xx: Cleanups at ir_i2c handler
  V4L/DVB (12712): em28xx: properly load ir-kbd-i2c when needed
  V4L/DVB (12701): saa7134: ir-kbd-i2c init data needs a persistent object
  V4L/DVB (12699): cx18: ir-kbd-i2c initialization data should point to a persistent object
  V4L/DVB (12698): em28xx: ir-kbd-i2c init data needs a persistent object
  V4L/DVB (12707): gspca - sn9c20x: Add SXGA support to MT9M111
  V4L/DVB (12706): gspca - sn9c20x: disable exposure/gain controls for MT9M111 sensors.
  V4L/DVB (12705): gspca - sn9c20x: Add SXGA support to SOI968
  V4L/DVB (12703): gspca - sn9c20x: Reduces size of object
  V4L/DVB (12704): gspca - sn9c20x: Fix exposure on SOI968 sensors
  V4L/DVB (12696): gspca - sonixj / sn9c102: Two drivers for 0c45:60fc and 0c45:613e.
  V4L/DVB (12695): gspca - vc032x: Do the LED work with the sensor hv7131r.
  V4L/DVB (12694): gspca - vc032x: Change the start exchanges of the sensor hv7131r.
  V4L/DVB (12693): gspca - sunplus: The brightness is signed.
  V4L/DVB (12692): gspca - sunplus: Optimize code.
  V4L/DVB (12691): gspca - sonixj: Don't use mdelay().
  V4L/DVB (12690): gspca - pac7311: Webcam 06f8:3009 added.
  V4L/DVB (12686): dvb-core: check supported QAM modulations
  V4L/DVB (12685): dvb-core: check fe->ops.set_frontend return value
  ...

* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, pat: Fix cacheflush address in change_page_attr_set_clr()
  mm: remove !NUMA condition from PAGEFLAGS_EXTENDED condition set
  x86: Fix earlyprintk=dbgp for machines without NX
  x86, pat: Sanity check remap_pfn_range for RAM region
  x86, pat: Lookup the protection from memtype list on vm_insert_pfn()
  x86, pat: Add lookup_memtype to get the current memtype of a paddr
  x86, pat: Use page flags to track memtypes of RAM pages
  x86, pat: Generalize the use of page flag PG_uncached
  x86, pat: Add rbtree to do quick lookup in memtype tracking
  x86, pat: Add PAT reserve free to io_mapping* APIs
  x86, pat: New i/f for driver to request memtype for IO regions
  x86, pat: ioremap to follow same PAT restrictions as other PAT users
  x86, pat: Keep identity maps consistent with mmaps even when pat_disabled
  x86, mtrr: make mtrr_aps_delayed_init static bool
  x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
  generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled
  x86: Fix an incorrect argument of reserve_bootmem()
  x86: Fix system crash when loading with "reservetop" parameter

* 'x86-txt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, intel_txt: clean up the impact on generic code, unbreak non-x86
  x86, intel_txt: Handle ACPI_SLEEP without X86_TRAMPOLINE
  x86, intel_txt: Fix typos in Kconfig help
  x86, intel_txt: Factor out the code for S3 setup
  x86, intel_txt: tboot.c needs <asm/fixmap.h>
  intel_txt: Force IOMMU on for Intel TXT launch
  x86, intel_txt: Intel TXT Sx shutdown support
  x86, intel_txt: Intel TXT reboot/halt shutdown support
  x86, intel_txt: Intel TXT boot support

* 'agp-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6:
  agp/intel: remove restore in resume
  agp: fix uninorth build
  intel-agp: Set dma mask for i915
  agp: kill phys_to_gart() and gart_to_phys()
  intel-agp: fix sglist allocation to avoid vmalloc()
  intel-agp: Move repeated sglist free into separate function
  agp: Switch agp_{un,}map_page() to take struct page * argument
  agp: tidy up handling of scratch pages w.r.t. DMA API
  intel_agp: Use PCI DMA API correctly on chipsets new enough to have IOMMU
  agp: Add generic support for graphics dma remapping
  agp: Switch mask_memory() method to take address argument again, not page

This patch will fix the following problem on Yeeloong netbook with
fujitsu disk.

irq 14: nobody cared (try booting with the "irqpoll" option)
Call Trace:
[<ffffffff8020d438>] dump_stack+0x8/0x40
[<ffffffff8027ec64>] __report_bad_irq+0x58/0xe4
[<ffffffff8027ee6c>] note_interrupt+0x17c/0x23c
[<ffffffff8027f9b8>] handle_level_irq+0xcc/0x134
[<ffffffff802125b0>] mach_irq_dispatch+0xb8/0x1e0
[<ffffffff8020041c>] ret_from_irq+0x0/0x4
[<ffffffff8029e678>] free_hot_cold_page+0x224/0x2a0
[<ffffffff8026f794>] swsusp_free+0xb0/0x14c
[<ffffffff8026ec08>] hibernate+0x198/0x218
[<ffffffff8026cfa8>] state_store+0x90/0x138
[<ffffffff8032b5a4>] sysfs_write_file+0x130/0x194
[<ffffffff802c94fc>] vfs_write+0xb8/0x180
[<ffffffff802c96b8>] SyS_write+0x50/0x98
[<ffffffff80203fd8>] handle_sys+0x158/0x174

handlers:
[<ffffffff80429670>] (ide_intr+0x0/0x300)
Disabling IRQ #14

References:

1. commit 1fde02e7146d4a1bab80fd1506f9018fe71e8521 of
git://dev.lemote.com/linux_loongson.git
2. 8bc1e5aa (ide: respect quirk_drives[]
list on all controllers)
Signed-off-by: Yan Hua <yanh@lemote.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we pass a big size data over perf_counter_open() syscall,
the kernel will copy this data to a small buffer, it will
cause kernel crash.

This bug makes the kernel unsafe and non-root local user can
trigger it.
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org>
LKML-Reference: <4AAF37D4.5010706@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'for-linus3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus3' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  SELinux: inline selinux_is_enabled in !CONFIG_SECURITY_SELINUX
  KEYS: Fix garbage collector
  KEYS: Unlock tasklist when exiting early from keyctl_session_to_parent
  CRED: Allow put_cred() to cope with a NULL groups list
  SELinux: flush the avc before disabling SELinux
  SELinux: seperate avc_cache flushing
  Creds: creds->security can be NULL is selinux is disabled

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (23 commits)
  at_hdmac: Rework suspend_late()/resume_early()
  PM: Reset transition_started at dpm_resume_noirq
  PM: Update kerneldoc comments in drivers/base/power/main.c
  PM: Add convenience macro to make switching to dev_pm_ops less error-prone
  hp-wmi: Switch driver to dev_pm_ops
  floppy: Switch driver to dev_pm_ops
  PM: Trivial fixes
  PM / Hibernate / Memory hotplug: Always use for_each_populated_zone()
  PM/Hibernate: Do not try to allocate too much memory too hard (rev. 2)
  PM/Hibernate: Do not release preallocated memory unnecessarily (rev. 2)
  PM/Hibernate: Rework shrinking of memory
  PM: Fix typo in label name s/Platofrm_finish/Platform_finish/
  PM: Run-time PM platform device bus support
  PM: Introduce core framework for run-time PM of I/O devices (rev. 17)
  Driver Core: Make PM operations a const pointer
  PM: Remove platform device suspend_late()/resume_early() V2
  USB: Rework musb suspend()/resume_early()
  I2C: Rework i2c-s3c2410 suspend_late()/resume() V2
  I2C: Rework i2c-pxa suspend_late()/resume_early()
  DMA: Rework txx9dmac suspend_late()/resume_early()
  ...

Fix trivial conflict in drivers/base/platform.c (due to same
constification patch being merged in both sides, along with some other
PM work in the PM branch)

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig:
  kconfig: add missing dependency of conf to localyesconfig
  kconfig: test if a .config already exists
  kconfig: make local .config default for streamline_config
  kconfig: test for /boot/config-uname after /proc/config.gz in localconfig
  kconfig: unset IKCONFIG_PROC and clean up nesting
  kconfig: search for a config to base the local(mod|yes)config on
  kconfig: keep config.gz around even if CONFIG_IKCONFIG_PROC is not set
  kconfig: have extract-ikconfig read ELF files
  kconfig: add check if end exists in extract-ikconfig
  kconfig: enable CONFIG_IKCONFIG from streamline_config.pl
  kconfig: do not warn about modules built in
  kconfig: streamline_config.pl do not stop with no depends
  kconfig: add make localyesconfig option
  kconfig: make localmodconfig to run streamline_config.pl
  kconfig: add streamline_config.pl to scripts