- 29 Dec, 2011 3 commits
-
-
Eric Dumazet authored
Provide child qdisc backlog (byte count) information so that "tc -s qdisc" can report it to user. qdisc netem 30: root refcnt 18 limit 1000 delay 20.0ms 10.0ms Sent 948517 bytes 898 pkt (dropped 0, overlimits 0 requeues 1) rate 175056bit 16pps backlog 114b 1p requeues 1 qdisc tbf 40: parent 30: rate 256000bit burst 20Kb/8 mpu 0b lat 0us Sent 948517 bytes 898 pkt (dropped 15, overlimits 611 requeues 0) backlog 18168b 12p requeues 0 Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pablo Neira Ayuso authored
warning: (NETFILTER_XT_MATCH_NFACCT) selects NETFILTER_NETLINK_ACCT which has unmet direct dependencies (NET && INET && NETFILTER && NETFILTER_ADVANCED) and then ERROR: "nfnetlink_subsys_unregister" [net/netfilter/nfnetlink_acct.ko] undefined! ERROR: "nfnetlink_subsys_register" [net/netfilter/nfnetlink_acct.ko] undefined! Reported-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Acked-by:
-
David S. Miller authored
It just obscures that the netdevice pointer and the expires value are implemented in the dst_entry sub-object of the ipv6 route. And it makes grepping for dst_entry member uses much harder too. Signed-off-by:
-
- 28 Dec, 2011 8 commits
-
-
David S. Miller authored
Also, create and use an rt6_bind_neighbour() in net/ipv6/route.c to consolidate some common logic. Signed-off-by: -
David S. Miller authored
In order to perform a proper universal hash on a vector of integers, we have to use different universal hashes on each vector element. Which means we need 4 different hash randoms for ipv6. Signed-off-by: -
Xi Wang authored
Check setsockopt arguments to avoid overflows and return -EINVAL for too large arguments. Signed-off-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
-
Xi Wang authored
Commit be639ac6 ("NET: AX.25: Check ioctl arguments to avoid overflows further down the road") rejects very large arguments, but doesn't completely fix overflows on 64-bit systems. Consider the AX25_T2 case. int opt; ... if (opt < 1 || opt > ULONG_MAX / HZ) { res = -EINVAL; break; } ax25->t2 = opt * HZ; The 32-bit multiplication opt * HZ would overflow before being assigned to 64-bit ax25->t2. This patch changes "opt" to unsigned long. Signed-off-by:
-
Stephen Hemminger authored
When testing L2TP support, I discovered that the l2tp module is not autoloaded as are other netlink interfaces. There is because of lack of hook in genetlink to call request_module and load the module. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
David Miller authored
The route we have here is for the address being added to the interface, ie. for input packet processing. Therefore using that route to determine whether an output nexthop gateway is known and resolved doesn't make any sense. So, simply remove this test, it never triggered anyways. Signed-off-by:
Neil Horman <nhorman@tuxdriver.com>
-
-
Rogerio Pimentel authored
On extensive NFS boots on a mx6qsabrelite board it was noted that "FEC: MDIO read timeout" were occuring, which caused failure on loading the FEC driver. The original FEC_MII_TIMEOUT was set to 1 ms, which is too low when passed to the usecs_to_jiffies macro. On ARM one jiffy is 10ms, so use a timeout of 30ms, which corresponds to 3 jiffies. After running extensive NFS boots, the MDIO timeouts do not occur anymore with this change. Signed-off-by:
Rogerio Pimentel <rogerio.pimentel@freescale.com> Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
-
- 27 Dec, 2011 29 commits
-
-
Jan Engelhardt authored
Using /proc/net/nf_conntrack has been deprecated in favour of the conntrack(8) tool. Signed-off-by:
Jan Engelhardt <jengelh@medozas.de> Signed-off-by:
-
Jan Engelhardt authored
One simplification of an if clause. Signed-off-by:
-
Patrick McHardy authored
References: http://www.spinics.net/lists/netfilter-devel/msg18875.html Augment xt_ecn by facilities to match on IPv6 packets' DSCP/TOS field similar to how it is already done for the IPv4 packet field. Signed-off-by:
-
Jan Engelhardt authored
Use the new macro and struct names in xt_ecn.h, and put the old definitions into a definition-forwarding ipt_ecn.h. Signed-off-by:
-
Jan Engelhardt authored
Prepare the ECN match for augmentation by an IPv6 counterpart. Since no symbol dependencies to ipv6.ko are added, having a single ecn match module is the more so welcome. Signed-off-by:
-
Joshua Kinard authored
SGI IP32 (O2)'s ethernet driver (meth) lacks a set_rx_mode function, which prevents IPv6 from working completely because any ICMPv6 neighbor solicitation requests aren't picked up by the driver. So the machine can ping out and connect to other systems, but other systems will have a very hard time connecting to the O2. Signed-off-by:
Joshua Kinard <kumba@gentoo.org> Signed-off-by:
-
Heiko Carstens authored
Fix allyesconfig build on architectures without IOMEM: drivers/net/ethernet/calxeda/xgmac.c:1800:2: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration] Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rob Herring <rob.herring@calxeda.com> Acked-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
-
Allan Stephens authored
Migrates the buf_seqno() helper routine from broadcast link level to unicast link level so that it can be used both types of TIPC links. This is a cosmetic change only, and does not affect the operation of TIPC. Signed-off-by:
Allan Stephens <allan.stephens@windriver.com> Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com>
-
Allan Stephens authored
Adds checks to TIPC's broadcast link so that it ignores any acknowledgement message containing a sequence number that does not correspond to an unacknowledged message currently in the broadcast link's transmit queue. This change prevents the broadcast link from becoming stalled if a newly booted node receives stale broadcast link acknowledgement information from another node that has not yet fully synchronized its end of the broadcast link to reflect the current state of the new node's end. Signed-off-by:
-
Allan Stephens authored
Adds code to release any unsent broadcast messages in the broadcast link transmit queue if TIPC loses contact with its only neighboring node. Previously, a broadcast link that was in the congested state would hold on to the unsent messages, even though the messages were now undeliverable. Signed-off-by:
-
Allan Stephens authored
The two broadcast link statistics fields that are used to derive the average length of that link's transmit queue are now updated only after a successful attempt to send a broadcast message, since there is no need to update these values when an unsuccessful send attempt leaves the queue unchanged. Signed-off-by:
-
Allan Stephens authored
Adds a check to detect when an attempt is made to send a message via the broadcast link and no neighboring nodes are currently available to receive it. Rather than wasting effort passing the message to the broadcast link and broadcast bearer, who will only throw it away, TIPC now frees the message immediately and reports success (i.e. the message has been delivered to all available destinations). Signed-off-by:
-
Allan Stephens authored
Fixes oversight that allowed broadcast link node map to be updated without first taking the broadcast link spinlock that protects the map. As part of this fix the node map has been incorporated into the broadcast link structure to make the need for such protection more evident. Signed-off-by:
-
Allan Stephens authored
Creates global variables to hold the broadcast link's pseudo-bearer and pseudo-link structures, rather than allocating them dynamically. There is only a single instance of each structure, and changing over to static allocation allows elimination of code to handle the cases where dynamic allocation was unsuccessful. The memset in the teardown code may look like they aren't used, but the same teardown code is run when there is a non-fatal error at init-time, so that stale data isn't present when the user fixes the cause of the soft error. Signed-off-by:
-
Allan Stephens authored
Gets rid of an unnecessary check in the routine that updates the port id of a node's name publications when the node is assigned a network address, since the routine is only invoked if the new address is different from the existing one. Signed-off-by:
-
Allan Stephens authored
Modifies TIPC's module unloading logic to switch itself into "single node" mode before starting to terminate networking support. This helps to ensure that no operations that require TIPC to be in "networking" mode can initiate once unloading starts. Signed-off-by:
-
Allan Stephens authored
Gets rid of two pointless operations that zero out the array used to record information about TIPC's Ethernet bearers. There is no need to initialize the array on start up since it is a global variable that is already zero'd out, and there is no need to zero it out on exit because the array is never referenced again. Signed-off-by:
-
Allan Stephens authored
Modifies Ethernet bearer disable logic to break the association between the bearer and its device driver at the time the bearer is disabled, rather than when the TIPC module is unloaded. This allows the array entry used by the disabled bearer to be re-used if the same bearer (or a different one) is subsequently enabled. Signed-off-by:
-
Allan Stephens authored
Change TIPC's shutdown code to deactivate generic networking support before terminating Ethernet media support. The deactivation of generic networking support causes all existing bearers to be destroyed, meaning the Ethernet media termination routine no longer has to bother marking them as unavailable. Signed-off-by:
-
Allan Stephens authored
Comment-only change to better explain why TIPC's configuration lock is temporarily released while activating support for network interfaces, and why the existing activation code doesn't require rework. Signed-off-by:
-
Allan Stephens authored
Permits run-time alteration of default link settings on a per-media and per-bearer basis, in addition to the existing per-link basis. The following syntax can now be used: tipc-config -lt=<link-name|bearer-name|media-name>/<tolerance> tipc-config -lp=<link-name|bearer-name|media-name>/<priority> tipc-config -lw=<link-name|bearer-name|media-name>/<window> Note that changes to the default settings for a given media type has no effect on the default settings used by existing bearers. Similarly, changes to default bearer settings has no effect on existing link endpoints that utilize that interface. Thanks to Florian Westphal <fw@strlen.de> for his contributions to the development of this enhancement. Signed-off-by: -
Allan Stephens authored
Adds a check to ensure that TIPC ignores an incoming neighbor discovery message that specifies an invalid media address as its source. The check ensures that the source address is a valid, non-broadcast address that could legally be used by a neighboring link endpoint. Signed-off-by:
-
Allan Stephens authored
Reworks TIPC's media address data structure and associated processing routines to transfer all media-specific details of address conversion to the associated TIPC media adaptation code. TIPC's generic bearer code now only needs to know which media type an address is associated with and whether or not it is a broadcast address, and totally ignores the "value" field that contains the actual media-specific addressing info. These changes eliminate the need for a number of endianness conversion operations and will make it easier for TIPC to support new media types in the future. Signed-off-by:
-
Allan Stephens authored
Enhances TIPC's Ethernet media support to provide 3 new address conversion routines, which allow TIPC to interpret an address that is in string form and to convert an address to and from the 20 byte format used in TIPC's neighbor discovery messages. These routines are pre-requisites to a follow on commit that hides all media-specific addressing details from TIPC's generic bearer code. Signed-off-by:
-
Allan Stephens authored
Enhances conversion of a media address to printable form so that an unconvertable address will be displayed as a string of hex digits, rather than not being displayed at all. (Also removes a pointless check for the existence of the media-specific address conversion routine, since the routine is not optional.) Signed-off-by:
-
Allan Stephens authored
Simplifies error handling performed during media registration, since TIPC no longer supports the dynamic addition of new media types that are potentially error-prone. These simplifications include the following: 1) No longer check for premature registration of a new media type. 2) No longer check for negative link priority values (which was pointless since such values are unsigned, and could cause a compiler warning). 3) No longer generate a warning describing the exact cause of any registration failure (just warns that overall registration failed). Signed-off-by:
-
Allan Stephens authored
Changes TIPC's list of registered media types from an array of media structures to an array of pointers to media structures. This eliminates the need to copy of the contents of the structure passed in during media registration. Signed-off-by:
-
Allan Stephens authored
Streamlines the detection of an attempt to register a TIPC media structure using an already registered name or type identifier. The revised logic now reuses an existing routine to detect an existing name and no longer unnecessarily manipulates the media type counter during an unsuccessful registration attempt. Signed-off-by:
-
Allan Stephens authored
Speeds up the registration of TIPC media types by passing in a structure containing the required information, rather than by passing in the various fields describing the media type individually. Signed-off-by:
-
