- 05 Mar, 2015 7 commits
-
-
Mark Salter authored
Commit de7b5b3d ("net: eth: xgene: change APM X-Gene SoC platform ethernet to support ACPI") breaks booting with devicetree with UEFI firmware. In that case, I get: Unhandled fault: synchronous external abort (0x96000010) at 0xfffffc0000620010 Internal error: : 96000010 [#1] SMP Modules linked in: vfat fat xfs libcrc32c ahci_xgene libahci_platform libahci CPU: 7 PID: 634 Comm: NetworkManager Not tainted 4.0.0-rc1+ #4 Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0-rh-0.14 Mar 1 2015 task: fffffe03d4c7e100 ti: fffffe03d4e24000 task.ti: fffffe03d4e24000 PC is at xgene_enet_rd_mcx_mac.isra.11+0x58/0xd4 LR is at xgene_gmac_tx_enable+0x2c/0x50 pc : [<fffffe000069d6fc>] lr : [<fffffe000069dcc4>] pstate: 80000145 sp : fffffe03d4e27590 x29: fffffe03d4e27590 x28: 0000000000000000 x27: fffffe03d4e277c0 x26: fffffe03da8fda10 x25: fffffe03d4e2760c x24: fffffe03d49e28c0 x23: fffffc0000620004 x22: 0000000000000000 x21: fffffc0000620000 x20: fffffc0000620010 x19: 000000000000000b x18: 000003ffd4a96020 x17: 000003ff7fc1f7a0 x16: fffffe000079b9cc x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: fffffe03d4e24000 x11: fffffe03d4e27da0 x10: 0000000000000001 x9 : 0000000000000000 x8 : fffffe03d4e27a20 x7 : 0000000000000000 x6 : 00000000ffffffef x5 : fffffe000105f7d0 x4 : fffffe00007ca8c8 x3 : fffffe03d4e2760c x2 : 0000000000000000 x1 : fffffc0000620000 x0 : 0000000040000000 Process NetworkManager (pid: 634, stack limit = 0xfffffe03d4e24028) Stack: (0xfffffe03d4e27590 to 0xfffffe03d4e28000) ... Call trace: [<fffffe000069d6fc>] xgene_enet_rd_mcx_mac.isra.11+0x58/0xd4 [<fffffe000069dcc0>] xgene_gmac_tx_enable+0x28/0x50 [<fffffe00006a112c>] xgene_enet_open+0x2c/0x130 [<fffffe00007b9254>] __dev_open+0xc8/0x148 [<fffffe00007b956c>] __dev_change_flags+0x90/0x158 [<fffffe00007b9664>] dev_change_flags+0x30/0x70 [<fffffe00007c8ab8>] do_setlink+0x278/0x870 [<fffffe00007c95bc>] rtnl_newlink+0x404/0x6a8 [<fffffe00007c8040>] rtnetlink_rcv_msg+0x98/0x218 [<fffffe00007e78e4>] netlink_rcv_skb+0xe0/0xf8 [<fffffe00007c7f94>] rtnetlink_rcv+0x30/0x44 [<fffffe00007e6f2c>] netlink_unicast+0xfc/0x210 [<fffffe00007e75b8>] netlink_sendmsg+0x498/0x5ac [<fffffe00007990b8>] do_sock_sendmsg+0xa4/0xcc [<fffffe000079a958>] ___sys_sendmsg+0x1fc/0x208 [<fffffe000079b984>] __sys_sendmsg+0x4c/0x94 [<fffffe000079b9f8>] SyS_sendmsg+0x2c/0x3c The problem here is that the enet hw clocks are not getting initialized because of a test to avoid the initialization if UEFI is used to boot. This is an incorrect test. When booting with UEFI and devicetree, the kernel must still initialize the enet hw clocks. If booting with ACPI, the clock hw is not exposed to the kernel and it is that case where we want to avoid initializing clocks. Signed-off-by:
Mark Salter <msalter@redhat.com> Acked-by:
Feng Kan <fkan@apm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Brian King authored
EEH recovery for bnx2x based adapters is not reliable on all Power systems using the default hot reset, which can result in an unrecoverable EEH error. Forcing the use of fundamental reset during EEH recovery fixes this. Cc: stable<stable@vger.kernel.org> Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
-
David S. Miller authored
David Vrabel says: ==================== xen-netback: fix ethtool stats and memory leak A couple of bug fixes for netback: - make ethool stats to report the correct values. - don't leak 1 MiB every time a VIF is destroyed. Changes in v2: - Split 2nd patch into leak fix and refactor patches ==================== Acked-by:
Ian Campbell <ian.campbell@citrix.com> Signed-off-by:
-
David Vrabel authored
When handling a from-guest frag list, xenvif_handle_frag_list() replaces the frags before calling the destructor to clean up the original (foreign) frags. Whilst this is safe (the destructor doesn't actually use the frags), it looks odd. Reorder the function to be less confusing. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
David Vrabel authored
Every time a VIF is destroyed up to 256 pages may be leaked if packets with more than MAX_SKB_FRAGS frags were transmitted from the guest. Even worse, if another user of ballooned pages allocated one of these ballooned pages it would not handle the unexpectedly >1 page count (e.g., gntdev would deadlock when unmapping a grant because the page count would never reach 1). When handling a from-guest skb with a frag list, unref the frags before releasing them so they are freed correctly when the VIF is destroyed. Signed-off-by:
-
David Vrabel authored
Use correct pointer arithmetic to get the pointer to each stat. Signed-off-by:
-
Arnd Bergmann authored
I recently did a rework of the smc91x driver and did some build-testing by compiling hundreds of randconfig kernels. Unfortunately, my script was wrong and did not actually test the configurations that mattered, so I introduced stupid typos in almost every file I touched. I fixed my script now, built all configurations that actually matter and fixed all the typos, this is the result. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by:
-
- 04 Mar, 2015 15 commits
-
-
Jiri Pirko authored
Currently the list is traversed using rcu variant. That is not correct since dev_set_mac_address can be called which eventually calls rtmsg_ifinfo_build_skb and there, skb allocation can sleep. So fix this by remove the rcu usage here. Fixes: 3d249d4c "net: introduce ethernet teaming device" Signed-off-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Fugang Duan authored
When do suspend/resume stress test, some log shows "rcv is not +last". The issue is that enet suspend will disable phy clock, phy link down, after resume back, enet MAC redo initial and ready to tx/rx packet, but phy still is not ready which is doing auto-negotiation. When phy link is not up, don't schdule napi soft irq. [Peter] It has fixed kernel panic after long time suspend/resume test with nfs rootfs. [ 8864.429458] fec 2188000.ethernet eth0: rcv is not +last [ 8864.434799] fec 2188000.ethernet eth0: rcv is not +last [ 8864.440088] fec 2188000.ethernet eth0: rcv is not +last [ 8864.445424] fec 2188000.ethernet eth0: rcv is not +last [ 8864.450782] fec 2188000.ethernet eth0: rcv is not +last [ 8864.456111] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 8864.464225] pgd = 80004000 [ 8864.466997] [00000000] *pgd=00000000 [ 8864.470627] Internal error: Oops: 17 [#1] SMP ARM [ 8864.475353] Modules linked in: evbug [ 8864.479006] CPU: 0 PID: 3 Comm: ksoftirqd/0 Not tainted 4.0.0-rc1-00044-g7a2a1d2 #234 [ 8864.486854] Hardware name: Freescale i.MX6 SoloX (Device Tree) [ 8864.492709] task: be069380 ti: be07a000 task.ti: be07a000 [ 8864.498137] PC is at memcpy+0x80/0x330 [ 8864.501919] LR is at gro_pull_from_frag0+0x34/0xa8 [ 8864.506735] pc : [<802bb080>] lr : [<8057c204>] psr: 00000113 [ 8864.506735] sp : be07bbd4 ip : 00000010 fp : be07bc0c [ 8864.518235] r10: 0000000e r9 : 00000000 r8 : 809c7754 [ 8864.523479] r7 : 809c7754 r6 : bb43c040 r5 : bd280cc0 r4 : 00000012 [ 8864.530025] r3 : 00000804 r2 : fffffff2 r1 : 00000000 r0 : bb43b83c [ 8864.536575] Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 8864.543904] Control: 10c5387d Table: bd14c04a DAC: 00000015 [ 8864.549669] Process ksoftirqd/0 (pid: 3, stack limit = 0xbe07a210) [ 8864.555869] Stack: (0xbe07bbd4 to 0xbe07c000) [ 8864.560250] bbc0: bd280cc0 bb43c040 809c7754 [ 8864.568455] bbe0: 809c7754 bb43b83c 00000012 8057c204 00000000 bd280cc0 bd8a0718 00000003 [ 8864.576658] bc00: be07bc5c be07bc10 8057ebf0 8057c1dc 00000000 00000000 8057ecc4 bef59760 [ 8864.584863] bc20: 00000002 bd8a0000 be07bc64 809c7754 00000000 bd8a0718 bd280cc0 bd8a0000 [ 8864.593066] bc40: 00000000 0000001c 00000000 bd8a0000 be07bc74 be07bc60 8057f148 8057eb90 [ 8864.601268] bc60: bf0810a0 00000000 be07bcf4 be07bc78 8044e7b4 8057f12c 00000000 8007df6c [ 8864.609470] bc80: bd8a0718 00000040 00000000 bd280a80 00000002 00000019 bd8a0600 bd8a1214 [ 8864.617672] bca0: bd8a0690 bf0810a0 00000000 00000000 bd8a1000 00000000 00000027 bd280cc0 [ 8864.625874] bcc0: 80062708 800625cc 000943db bd8a0718 00000001 000d1166 00000040 be7c1ec0 [ 8864.634077] bce0: 0000012c be07bd00 be07bd3c be07bcf8 8057fc98 8044e3ac 809c2ec0 3ddff000 [ 8864.642280] bd00: be07bd00 be07bd00 be07bd08 be07bd08 00000000 00000020 809c608c 00000003 [ 8864.650481] bd20: 809c6080 40000001 809c6088 00200100 be07bd84 be07bd40 8002e690 8057fac8 [ 8864.658684] bd40: be07bd64 be07bd50 00000001 04208040 000d1165 0000000a be07bd84 809c0d7c [ 8864.666885] bd60: 00000000 809c6af8 00000000 00000001 be008000 00000000 be07bd9c be07bd88 [ 8864.675087] bd80: 8002eb64 8002e564 00000125 809c0d7c be07bdc4 be07bda0 8006f100 8002eaac [ 8864.683291] bda0: c080e10c be07bde8 809c6c6c c080e100 00000002 00000000 be07bde4 be07bdc8 [ 8864.691492] bdc0: 800087a0 8006f098 806f2934 20000013 ffffffff be07be1c be07be44 be07bde8 [ 8864.699695] bde0: 800133a4 80008784 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.707896] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.716098] be20: 8006278c 806f2934 20000013 ffffffff be069380 be7c1680 be07be7c be07be48 [ 8864.724300] be40: 80049cfc 806f2910 00000001 00000000 80049cb4 00000000 be07be7c be7c1680 [ 8864.732502] be60: be3289c0 be069380 bd23b600 be0cfe00 be07bebc be07be80 806ed614 80049c68 [ 8864.740706] be80: be07a000 0000020a 809c608c 00000003 00000001 8002e858 be07a000 be035740 [ 8864.748907] bea0: 00000000 00000001 809d4598 00000000 be07bed4 be07bec0 806edd0c 806ed440 [ 8864.757110] bec0: be07a000 be07a000 be07bee4 be07bed8 806edd68 806edcf0 be07bef4 be07bee8 [ 8864.765311] bee0: 8002e860 806edd34 be07bf24 be07bef8 800494b0 8002e828 be069380 00000000 [ 8864.773512] bf00: be035780 be035740 8004938c 00000000 00000000 00000000 be07bfac be07bf28 [ 8864.781715] bf20: 80045928 80049398 be07bf44 00000001 00000000 be035740 00000000 00030003 [ 8864.789917] bf40: dead4ead ffffffff ffffffff 80a2716c 80b59b00 00000000 8088c954 be07bf5c [ 8864.798120] bf60: be07bf5c 00000000 00000000 dead4ead ffffffff ffffffff 80a2716c 00000000 [ 8864.806320] bf80: 00000000 8088c954 be07bf88 be07bf88 be035780 8004584c 00000000 00000000 [ 8864.814523] bfa0: 00000000 be07bfb0 8000ed10 80045858 00000000 00000000 00000000 00000000 [ 8864.822723] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 8864.830925] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 5ffbb5f7 f9fcf5e7 [ 8864.839115] Backtrace: [ 8864.841631] [<8057c1d0>] (gro_pull_from_frag0) from [<8057ebf0>] (dev_gro_receive+0x6c/0x3f8) [ 8864.850173] r6:00000003 r5:bd8a0718 r4:bd280cc0 r3:00000000 [ 8864.855958] [<8057eb84>] (dev_gro_receive) from [<8057f148>] (napi_gro_receive+0x28/0xac) [ 8864.864152] r10:bd8a0000 r9:00000000 r8:0000001c r7:00000000 r6:bd8a0000 r5:bd280cc0 [ 8864.872115] r4:bd8a0718 [ 8864.874713] [<8057f120>] (napi_gro_receive) from [<8044e7b4>] (fec_enet_rx_napi+0x414/0xc74) [ 8864.883167] r5:00000000 r4:bf0810a0 [ 8864.886823] [<8044e3a0>] (fec_enet_rx_napi) from [<8057fc98>] (net_rx_action+0x1dc/0x2ec) [ 8864.895016] r10:be07bd00 r9:0000012c r8:be7c1ec0 r7:00000040 r6:000d1166 r5:00000001 [ 8864.902982] r4:bd8a0718 [ 8864.905570] [<8057fabc>] (net_rx_action) from [<8002e690>] (__do_softirq+0x138/0x2c4) [ 8864.913417] r10:00200100 r9:809c6088 r8:40000001 r7:809c6080 r6:00000003 r5:809c608c [ 8864.921382] r4:00000020 [ 8864.923966] [<8002e558>] (__do_softirq) from [<8002eb64>] (irq_exit+0xc4/0x138) [ 8864.931289] r10:00000000 r9:be008000 r8:00000001 r7:00000000 r6:809c6af8 r5:00000000 [ 8864.939252] r4:809c0d7c [ 8864.941841] [<8002eaa0>] (irq_exit) from [<8006f100>] (__handle_domain_irq+0x74/0xe8) [ 8864.949688] r4:809c0d7c r3:00000125 [ 8864.953342] [<8006f08c>] (__handle_domain_irq) from [<800087a0>] (gic_handle_irq+0x28/0x68) [ 8864.961707] r9:00000000 r8:00000002 r7:c080e100 r6:809c6c6c r5:be07bde8 r4:c080e10c [ 8864.969597] [<80008778>] (gic_handle_irq) from [<800133a4>] (__irq_svc+0x44/0x5c) [ 8864.977097] Exception stack(0xbe07bde8 to 0xbe07be30) [ 8864.982173] bde0: 00000001 00000001 00000000 00000000 be7c1680 00000000 [ 8864.990377] be00: be0cfe00 bd93eb40 00000002 00000000 00000000 be07be44 be07be00 be07be30 [ 8864.998573] be20: 8006278c 806f2934 20000013 ffffffff [ 8865.003638] r7:be07be1c r6:ffffffff r5:20000013 r4:806f2934 [ 8865.009447] [<806f2904>] (_raw_spin_unlock_irq) from [<80049cfc>] (finish_task_switch+0xa0/0x160) [ 8865.018334] r4:be7c1680 r3:be069380 [ 8865.021993] [<80049c5c>] (finish_task_switch) from [<806ed614>] (__schedule+0x1e0/0x5dc) [ 8865.030098] r8:be0cfe00 r7:bd23b600 r6:be069380 r5:be3289c0 r4:be7c1680 [ 8865.036942] [<806ed434>] (__schedule) from [<806edd0c>] (preempt_schedule_common+0x28/0x44) [ 8865.045307] r9:00000000 r8:809d4598 r7:00000001 r6:00000000 r5:be035740 r4:be07a000 [ 8865.053197] [<806edce4>] (preempt_schedule_common) from [<806edd68>] (_cond_resched+0x40/0x48) [ 8865.061822] r4:be07a000 r3:be07a000 [ 8865.065472] [<806edd28>] (_cond_resched) from [<8002e860>] (run_ksoftirqd+0x44/0x64) [ 8865.073252] [<8002e81c>] (run_ksoftirqd) from [<800494b0>] (smpboot_thread_fn+0x124/0x190) [ 8865.081550] [<8004938c>] (smpboot_thread_fn) from [<80045928>] (kthread+0xdc/0xf8) [ 8865.089133] r10:00000000 r9:00000000 r8:00000000 r7:8004938c r6:be035740 r5:be035780 [ 8865.097097] r4:00000000 r3:be069380 [ 8865.100752] [<8004584c>] (kthread) from [<8000ed10>] (ret_from_fork+0x14/0x24) [ 8865.107990] r7:00000000 r6:00000000 r5:8004584c r4:be035780 [ 8865.113767] Code: e320f000 e4913004 e4914004 e4915004 (e4916004) [ 8865.120006] ---[ end trace b0a4c6bd499288ca ]--- [ 8865.124697] Kernel panic - not syncing: Fatal exception in interrupt [ 8865.131084] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Cc: [v3.19+] stable@vger.kernel.org Tested-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: Fix backward compatibility of newer firmware with older kernel Kernel 3.17 driver supports only RGMII ethernet interface. Since the Tianocore DT contains same compatibility string for RGMII, SGMII based 1G and XFI based 10G interfaces, crash happens when probe called on SGMII based 1G and XFI based 10G interface. This patch fixes the backward compatibility of the older driver with the newer firmware by making the binding unique so that the older driver won't recognize the non-supported interfaces. v2: Address comments from v1 * updated cover letter subject line with net: xgene * Documentation: formatted compatible string values as list v1: * Initial version ==================== Signed-off-by: -
Iyappan Subramanian authored
This patch fixes the backward compatibile of the older driver with the newer firmware by making the binding unique so that the older driver won't recognize the non-supported interfaces. Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Signed-off-by:
Keyur Chudgar <kchudgar@apm.com> Tested-by:
Mark Langsdorf <mlangsdo@redhat.com> Signed-off-by:
-
Iyappan Subramanian authored
This patch fixes the backward compatibility of the older driver with the newer firmware by making the binding unique so that the older driver won't recognize the non-supported interfaces. The new bindings are in sync with the newer firmware. Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
-
Lorenzo Colitti authored
1. For an IPv4 ping socket, ping_check_bind_addr does not check the family of the socket address that's passed in. Instead, make it behave like inet_bind, which enforces either that the address family is AF_INET, or that the family is AF_UNSPEC and the address is 0.0.0.0. 2. For an IPv6 ping socket, ping_check_bind_addr returns EINVAL if the socket family is not AF_INET6. Return EAFNOSUPPORT instead, for consistency with inet6_bind. 3. Make ping_v4_sendmsg and ping_v6_sendmsg return EAFNOSUPPORT instead of EINVAL if an incorrect socket address structure is passed in. 4. Make IPv6 ping sockets be IPv6-only. The code does not support IPv4, and it cannot easily be made to support IPv4 because the protocol numbers for ICMP and ICMPv6 are different. This makes connect(::ffff:192.0.2.1) fail with EAFNOSUPPORT instead of making the socket unusable. Among other things, this fixes an oops that can be triggered by: int s = socket(AF_INET, SOCK_DGRAM, IPPROTO_ICMP); struct sockaddr_in6 sin6 = { .sin6_family = AF_INET6, .sin6_addr = in6addr_any, }; bind(s, (struct sockaddr *) &sin6, sizeof(sin6)); Change-Id: If06ca86d9f1e4593c0d6df174caca3487c57a241 Signed-off-by:Lorenzo Colitti <lorenzo@google.com> Signed-off-by:
-
Nicolas Schichan authored
In case there was some tx buffer reclaimed and not enough rx packets to consume the whole budget, napi_complete would not be called and interrupts would be kept disabled, effectively resulting in the network core never to call the poll callback again and no rx/tx interrupts to be fired either. Fix that by only accounting the rx work done in the poll callback. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Alexey Brodkin authored
Currently we're getting IRQs after lots of resources are already allocated: * netdev * clocks * MDIO bus Also HW gets initialized by the time when checking IRQs as well. Now there's a possibility for master interrupt controller to be not probed yet. This will lead to exit from GMAC probe routine with "- EPROBE_DEFER" and so deferred probe will hapen later on. But since we exited the first GMAC probe without release of all allocated resources there could be conflicts on subsequent probes. For example this is what happens for me: --->8--- stmmaceth e0018000.ethernet: no reset control found stmmac - user ID: 0x10, Synopsys ID: 0x37 Ring mode enabled DMA HW capability register supported Normal descriptors RX Checksum Offload Engine supported (type 2) TX Checksum insertion supported Enable RX Mitigation via HW Watchdog Timer libphy: stmmac: probed eth0: PHY ID 20005c7a at 1 IRQ POLL (stmmac-0:01) active platform e0018000.ethernet: Driver stmmaceth requests probe deferral ... ... ... stmmaceth e0018000.ethernet: no reset control found stmmac - user ID: 0x10, Synopsys ID: 0x37 Ring mode enabled DMA HW capability register supported Normal descriptors RX Checksum Offload Engine supported (type 2) TX Checksum insertion supported Enable RX Mitigation via HW Watchdog Timer ------------[ cut here ]------------ WARNING: CPU: 0 PID: 6 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x4e/0x68() sysfs: cannot create duplicate filename '/devices/platform/axs10x_mb/e0018000.ethernet/mdio_bus/stmmac-0' CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 4.0.0-rc1-next-20150303+#8 Workqueue: deferwq deferred_probe_work_func Stack Trace: arc_unwind_core+0xb8/0x114 warn_slowpath_common+0x5a/0x8c warn_slowpath_fmt+0x2e/0x38 sysfs_warn_dup+0x4e/0x68 sysfs_create_dir_ns+0x98/0xa0 kobject_add_internal+0x8c/0x2e8 kobject_add+0x4a/0x8c device_add+0xc6/0x448 mdiobus_register+0x6c/0x164 stmmac_mdio_register+0x112/0x264 stmmac_dvr_probe+0x6c0/0x85c stmmac_pltfr_probe+0x2e4/0x50c platform_drv_probe+0x26/0x5c really_probe+0x76/0x1dc bus_for_each_drv+0x42/0x7c device_attach+0x64/0x6c bus_probe_device+0x74/0xa4 deferred_probe_work_func+0x50/0x84 process_one_work+0xf8/0x2cc worker_thread+0x110/0x478 kthread+0x8a/0x9c ret_from_fork+0x14/0x18 ---[ end trace a2dfaa7d630c8be1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 6 at lib/kobject.c:240 kobject_add_internal+0x218/0x2e8() kobject_add_internal failed for stmmac-0 with -EEXIST, don't try to register things with the same name in the same di. CPU: 0 PID: 6 Comm: kworker/u2:0 Tainted: G W 4.0.0-rc1-next-20150303+ #8 Workqueue: deferwq deferred_probe_work_func Stack Trace: arc_unwind_core+0xb8/0x114 warn_slowpath_common+0x5a/0x8c warn_slowpath_fmt+0x2e/0x38 kobject_add_internal+0x218/0x2e8 kobject_add+0x4a/0x8c device_add+0xc6/0x448 mdiobus_register+0x6c/0x164 stmmac_mdio_register+0x112/0x264 stmmac_dvr_probe+0x6c0/0x85c stmmac_pltfr_probe+0x2e4/0x50c platform_drv_probe+0x26/0x5c really_probe+0x76/0x1dc bus_for_each_drv+0x42/0x7c device_attach+0x64/0x6c bus_probe_device+0x74/0xa4 deferred_probe_work_func+0x50/0x84 process_one_work+0xf8/0x2cc worker_thread+0x110/0x478 kthread+0x8a/0x9c ret_from_fork+0x14/0x18 ---[ end trace a2dfaa7d630c8be2 ]--- libphy: mii_bus stmmac-0 failed to register : Cannot register as MDIO bus stmmac_pltfr_probe: main driver probe failed stmmaceth: probe of e0018000.ethernet failed with error -22 --->8--- Essential fix is to check for IRQs availability as early as possible and then safely go to deferred probe if IRQs are not there yet. Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-bufLinus Torvalds authored
Pull dma-buf fixes from Sumit Semwal: "Minor timeout & other fixes on reservation/fence" * tag 'dma-buf-for-4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf: reservation: Remove shadowing local variable 'ret' dma-buf/fence: don't wait when specified timeout is zero reservation: wait only with non-zero timeout specified (v3)
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull KVM fixes from Marcelo Tosatti: "KVM bug fixes, including a SVM interrupt injection regression fix, MIPS and ARM bug fixes" * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MIPS: Enable after disabling interrupt KVM: MIPS: Fix trace event to save PC directly KVM: SVM: fix interrupt injection (apic->isr_count always 0) KVM: emulate: fix CMPXCHG8B on 32-bit hosts KVM: VMX: fix build without CONFIG_SMP arm/arm64: KVM: Add exit reaons to kvm_exit event tracing ARM: KVM: Fix size check in __coherent_cache_guest_page
-
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arcLinus Torvalds authored
Pull ARC fixes from Vineet Gupta: - Fix for /proc/<pid>/maps "stack" vma annotation - sched stats not printing correct sleeping task PC - perf not reporting page faults * tag 'arc-4.0-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: Fix thread_saved_pc() ARC: Fix KSTK_ESP() ARC: perf: Enable generic software events ARC: Make arc_unwind_core accessible externally
-
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix for dynticks. - Fix for smpboot bug. - Fix for IOMMU group refcounting. * tag 'powerpc-4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: powerpc/iommu: Remove IOMMU device references via bus notifier powerpc/smp: Wait until secondaries are active & online powerpc: Re-enable dynticks
-
Nishanth Aravamudan authored
After d905c5df ("PPC: POWERNV: move iommu_add_device earlier"), the refcnt on the kobject backing the IOMMU group for a PCI device is elevated by each call to pci_dma_dev_setup_pSeriesLP() (via set_iommu_table_base_and_group). When we go to dlpar a multi-function PCI device out: iommu_reconfig_notifier -> iommu_free_table -> iommu_group_put BUG_ON(tbl->it_group) We trip this BUG_ON, because there are still references on the table, so it is not freed. Fix this by moving the powernv bus notifier to common code and calling it for both powernv and pseries. Fixes: d905c5df ("PPC: POWERNV: move iommu_add_device earlier") Signed-off-by:
Nishanth Aravamudan <nacc@linux.vnet.ibm.com> Tested-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Anton has a busy ppc64le KVM box where guests sometimes hit the infamous "kernel BUG at kernel/smpboot.c:134!" issue during boot: BUG_ON(td->cpu != smp_processor_id()); Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops output confirms it: CPU: 0 Comm: watchdog/130 The problem is that we aren't ensuring the CPU active bit is set for the secondary before allowing the master to continue on. The master unparks the secondary CPU's kthreads and the scheduler looks for a CPU to run on. It calls select_task_rq() and realises the suggested CPU is not in the cpus_allowed mask. It then ends up in select_fallback_rq(), and since the active bit isnt't set we choose some other CPU to run on. This seems to have been introduced by 6acbfb96 "sched: Fix hotplug vs. set_cpus_allowed_ptr()", which changed from setting active before online to setting active after online. However that was in turn fixing a bug where other code assumed an active CPU was also online, so we can't just revert that fix. The simplest fix is just to spin waiting for both active & online to be set. We already have a barrier prior to set_cpu_online() (which also sets active), to ensure all other setup is completed before online & active are set. Fixes: 6acbfb96 ("sched: Fix hotplug vs. set_cpus_allowed_ptr()") Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
- 03 Mar, 2015 14 commits
-
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd fixes from Bruce Fields: "Three miscellaneous bugfixes, most importantly the clp->cl_revoked bug, which we've seen several reports of people hitting" * 'for-4.0' of git://linux-nfs.org/~bfields/linux: sunrpc: integer underflow in rsc_parse() nfsd: fix clp->cl_revoked list deletion causing softlock in nfsd svcrpc: fix memory leak in gssp_accept_sec_context_upcall
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) If an IPVS tunnel is created with a mixed-family destination address, it cannot be removed. Fix from Alexey Andriyanov. 2) Fix module refcount underflow in netfilter's nft_compat, from Pablo Neira Ayuso. 3) Generic statistics infrastructure can reference variables sitting on a released function stack, therefore use dynamic allocation always. Fix from Ignacy Gawędzki. 4) skb_copy_bits() return value test is inverted in ip_check_defrag(). 5) Fix network namespace exit in openvswitch, we have to release all of the per-net vports. From Pravin B Shelar. 6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter. 7) Fix rhashtable grow/shrink behavior, only expand during inserts and shrink during deletes. From Daniel Borkmann. 8) Netdevice names with semicolons should never be allowed, because they serve as a separator. From Matthew Thode. 9) Use {,__}set_current_state() where appropriate, from Fabian Frederick. 10) Revert byte queue limits support in r8169 driver, it's causing regressions we can't figure out. 11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to measure packets in flight, properly use tcp_packets_in_flight() instead. From Neal Cardwell. 12) Fix accidental removal of support for bluetooth in CSR based Intel wireless cards. From Marcel Holtmann. 13) We accidently added a behavioral change between native and compat tasks, wrt testing the MSG_CMSG_COMPAT bit. Just ignore it if the user happened to set it in a native binary as that was always the behavior we had. From Catalin Marinas. 14) Check genlmsg_unicast() return valud in hwsim netlink tx frame handling, from Bob Copeland. 15) Fix stale ->radar_required setting in mac80211 that can prevent starting new scans, from Eliad Peller. 16) Fix memory leak in nl80211 monitor, from Johannes Berg. 17) Fix race in TX index handling in xen-netback, from David Vrabel. 18) Don't enable interrupts in amx-xgbe driver until all software et al. state is ready for the interrupt handler to run. From Thomas Lendacky. 19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric W Biederman. 20) The amount of header space needed in macvtap was not calculated properly, fix it otherwise we splat past the beginning of the packet. From Eric Dumazet. 21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin. 22) Don't raw initialize or mod timers, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 23) Fix software maintained statistics in bcmgenet and systemport drivers, from Florian Fainelli. 24) DMA descriptor updates in sh_eth need proper memory barriers, from Ben Hutchings. 25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal Kubecek. 26) Openvswitch's non-masked set actions aren't constructed properly into netlink messages, fix from Joe Stringer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) openvswitch: Fix serialization of non-masked set actions. gianfar: Reduce logging noise seen due to phy polling if link is down ibmveth: Add function to enable live MAC address changes net: bridge: add compile-time assert for cb struct size udp: only allow UFO for packets from SOCK_DGRAM sockets sh_eth: Really fix padding of short frames on TX Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" sh_eth: Fix RX recovery on R-Car in case of RX ring underrun sh_eth: Ensure proper ordering of descriptor active bit write/read net/mlx4_en: Disbale GRO for incoming loopback/selftest packets net/mlx4_core: Fix wrong mask and error flow for the update-qp command net: systemport: fix software maintained statistics net: bcmgenet: fix software maintained statistics rxrpc: don't multiply with HZ twice rxrpc: terminate retrans loop when sending of skb fails net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface. net: pasemi: Use setup_timer and mod_timer net: stmmac: Use setup_timer and mod_timer net: 8390: axnet_cs: Use setup_timer and mod_timer net: 8390: pcnet_cs: Use setup_timer and mod_timer ... -
Joe Stringer authored
Set actions consist of a regular OVS_KEY_ATTR_* attribute nested inside of a OVS_ACTION_ATTR_SET action attribute. When converting masked actions back to regular set actions, the inner attribute length was not changed, ie, double the length being serialized. This patch fixes the bug. Fixes: 83d2b9ba ("net: openvswitch: Support masked set actions.") Signed-off-by:
Joe Stringer <joestringer@nicira.com> Acked-by:
Jarno Rajahalme <jrajahalme@nicira.com> Signed-off-by:
-
Guenter Roeck authored
Commit 6ce29b0e ("gianfar: Avoid unnecessary reg accesses in adjust_link()") eliminates unnecessary calls to adjust_link for phy devices which don't support interrupts and need polling. As part of that work, the 'new_state' local flag, which was used to reduce logging noise on the console, was eliminated. Unfortunately, that means that a 'Link is Down' log message will now be issued continuously if a link is configured as UP, the link state is down, and the associated phy requires polling. This occurs because priv->oldduplex is -1 in this case, which always differs from phydev->duplex. In addition, phydev->speed may also differ from priv->oldspeed. gfar_update_link_state() is therefore called each time a phy is polled, even if the link state did not change. Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by:
-
Thomas Falcon authored
Add a function that will enable changing the MAC address of an ibmveth interface while it is still running. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Reviewed-by:
-
Florian Westphal authored
make build fail if structure no longer fits into ->cb storage. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Linus Torvalds authored
-
Daniel Vetter authored
This is a tricky story of the new atomic state handling and the legacy code fighting over each another. The bug at hand is an underrun of the framebuffer reference with subsequent hilarity caused by the load detect code. Which is peculiar since the the exact same code works fine as the implementation of the legacy setcrtc ioctl. Let's look at the ingredients: - Currently our code is a crazy mix of legacy modeset interfaces to set the parameters and half-baked atomic state tracking underneath. While this transition is going we're using the transitional plane helpers to update the atomic side (drm_plane_helper_disable/update and friends), i.e. plane->state->fb. Since the state structure owns the fb those functions take care of that themselves. The legacy state (specifically crtc->primary->fb) is still managed by the old code (and mostly by the drm core), with the fb reference counting done by callers (core drm for the ioctl or the i915 load detect code). The relevant commit is commit ea2c67bb Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Dec 23 10:41:52 2014 -0800 drm/i915: Move to atomic plane helpers (v9) - drm_plane_helper_disable has special code to handle multiple calls in a row - it checks plane->crtc == NULL and bails out. This is to match the proper atomic implementation which needs the crtc to get at the implied locking context atomic updates always need. See commit acf24a39 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jul 29 15:33:05 2014 +0200 drm/plane-helper: transitional atomic plane helpers - The universal plane code split out the implicit primary plane from the CRTC into it's own full-blown drm_plane object. As part of that the setcrtc ioctl (which updated both the crtc mode and primary plane) learned to set crtc->primary->crtc on modeset to make sure the plane->crtc assignments statate up to date in commit e13161af Author: Matt Roper <matthew.d.roper@intel.com> Date: Tue Apr 1 15:22:38 2014 -0700 drm: Add drm_crtc_init_with_planes() (v2) Unfortunately we've forgotten to update the load detect code. Which wasn't a problem since the load detect modeset is temporary and always undone before we drop the locks. - Finally there is a organically grown history (i.e. don't ask) around who sets the legacy plane->fb for the various driver entry points. Originally updating that was the drivers duty, but for almost all places we've moved that (plus updating the refcounts) into the core. Again the exception is the load detect code. Taking all together the following happens: - The load detect code doesn't set crtc->primary->crtc. This is only really an issue on crtcs never before used or when userspace explicitly disabled the primary plane. - The plane helper glue code short-circuits because of that and leaves a non-NULL fb behind in plane->state->fb and plane->fb. The state fb isn't a real problem (it's properly refcounted on its own), it's just the canary. - Load detect code drops the reference for that fb, but doesn't set plane->fb = NULL. This is ok since it's still living in that old world where drivers had to clear the pointer but the core/callers handled the refcounting. - On the next modeset the drm core notices plane->fb and takes care of refcounting it properly by doing another unref. This drops the refcount to zero, leaving state->plane now pointing at freed memory. - intel_plane_duplicate_state still assume it owns a reference to that very state->fb and bad things start to happen. Fix this all by applying the same duct-tape as for the legacy setcrtc ioctl code and set crtc->primary->crtc properly. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Rob Clark <robdclark@gmail.com> Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Matt Roper <matthew.d.roper@intel.com> Reported-and-tested-by:
Linus Torvalds <torvalds@linux-foundation.org> Reported-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Signed-off-by:
-
Michal Kubeček authored
If an over-MTU UDP datagram is sent through a SOCK_RAW socket to a UFO-capable device, ip_ufo_append_data() sets skb->ip_summed to CHECKSUM_PARTIAL unconditionally as all GSO code assumes transport layer checksum is to be computed on segmentation. However, in this case, skb->csum_start and skb->csum_offset are never set as raw socket transmit path bypasses udp_send_skb() where they are usually set. As a result, driver may access invalid memory when trying to calculate the checksum and store the result (as observed in virtio_net driver). Moreover, the very idea of modifying the userspace provided UDP header is IMHO against raw socket semantics (I wasn't able to find a document clearly stating this or the opposite, though). And while allowing CHECKSUM_NONE in the UFO case would be more efficient, it would be a bit too intrusive change just to handle a corner case like this. Therefore disallowing UFO for packets from SOCK_DGRAM seems to be the best option. Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
David S. Miller authored
Ben Hutchings says: ==================== Fixes for sh_eth #4 v2 I'm continuing review and testing of Ethernet support on the R-Car H2 chip, with help from a colleague. This series fixes a few more issues. These are not tested on any of the other supported chips. v2: Add note that the revert is not a pure revert. ==================== Signed-off-by: -
Ben Hutchings authored
My previous fix to clear padding of short frames used skb->len as the DMA length, assuming that skb_padto() extended skb->len to include the padding. That isn't the case; we need to use skb_put_padto() instead. (This wasn't immediately obvious because software padding isn't actually needed on the R-Car H2. We could make it conditional on which chip is being driven, but it's probably not worth the effort.) Reported-by:
"Violeta Menéndez González" <violeta.menendez@codethink.co.uk> Fixes: 612a17a54b50 ("sh_eth: Fix padding of short frames on TX") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Ben Hutchings authored
This reverts commit fd9af07c. The hardware manual states that the frame error and multicast bits are copied to bits 9:0 of RD0, not bits 25:16. I've tested that this is true for RFS1 (CRC error), RFS3 (frame too short), RFS4 (frame too long) and RFS8 (multicast). Also adjust a comment to agree with this. Signed-off-by:
-
Ben Hutchings authored
In case of RX ring underrun (RDE), we attempt to reset the software descriptor pointers (dirty_rx and cur_rx) to match where the hardware will read the next descriptor from, as that might not be the first dirty descriptor. This relies on reading RDFAR, but that register doesn't exist on all supported chips - specifically, not on the R-Car chips. This will result in unpredictable behaviour on those chips after an RDE. Make this pointer reset conditional and assume that it isn't needed on the R-Car chips. This fix also assumes that RDFAR is never exposed at offset 0 in the memory map - this is currently true, and a subsequent commit will fix the ambiguity between offset 0 and no-offset in the register offset maps. Fixes: 79fba9f5 ("net: sh_eth: fix the rxdesc pointer when rx ...") Signed-off-by:
-
Ben Hutchings authored
When submitting a DMA descriptor, the active bit must be written last. When reading a completed DMA descriptor, the active bit must be read first. Add memory barriers to ensure that this ordering is maintained. Signed-off-by:
-
- 02 Mar, 2015 4 commits
-
-
Tapasweni Pathak authored
Enable disabled interrupt, on unsuccessful operation. Found by Coccinelle. Signed-off-by:
Tapasweni Pathak <tapaswenipathak@gmail.com> Acked-by:
Julia Lawall <julia.lawall@lip6.fr> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com>
-
James Hogan authored
Currently the guest exit trace event saves the VCPU pointer to the structure, and the guest PC is retrieved by dereferencing it when the event is printed rather than directly from the trace record. This isn't safe as the printing may occur long afterwards, after the PC has changed and potentially after the VCPU has been freed. Usually this results in the same (wrong) PC being printed for multiple trace events. It also isn't portable as userland has no way to access the VCPU data structure when interpreting the trace record itself. Lets save the actual PC in the structure so that the correct value is accessible later. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Two GPIO fixes: - Fix a translation problem in of_get_named_gpiod_flags() - Fix a long standing container_of() mistake in the TPS65912 driver" * tag 'gpio-v4.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tps65912: fix wrong container_of arguments gpiolib: of: allow of_gpiochip_find_and_xlate to find more than one chip per node
-
Linus Torvalds authored
Merge branch 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal Pull thermal management fixes from Eduardo Valentin: "Specifics: - Several fixes in tmon tool. - Fixes in intel int340x for _ART and _TRT tables. - Add id for Avoton SoC into powerclamp driver. - Fixes in RCAR thermal driver to remove race conditions and fix fail path - Fixes in TI thermal driver: removal of unnecessary code and build fix if !CONFIG_PM_SLEEP - Cleanups in exynos thermal driver - Add stubs for include/linux/thermal.h. Now drivers using thermal calls but that also work without CONFIG_THERMAL will be able to compile for systems that don't care about thermal. Note: I am sending this pull on Rui's behalf while he fixes issues in his Linux box" * 'fixes-for-4.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal: thermal: int340x_thermal: Ignore missing _ART, _TRT tables thermal/intel_powerclamp: add id for Avoton SoC tools/thermal: tmon: silence 'set but not used' warnings tools/thermal: tmon: use pkg-config to determine library dependencies tools/thermal: tmon: support cross-compiling tools/thermal: tmon: add .gitignore tools/thermal: tmon: fixup tui windowing calculations tools/thermal: tmon: tui: don't hard-code dialog window size assumptions tools/thermal: tmon: add min/max macros tools/thermal: tmon: add --target-temp parameter thermal: exynos: Clean-up code to use oneline entry for exynos compatible table thermal: rcar: Make error and remove paths symmetrical with init thermal: rcar: Fix race condition between init and interrupt thermal: Introduce dummy functions when thermal is not defined ti-soc-thermal: Delete an unnecessary check before the function call "cpufreq_cooling_unregister" thermal: ti-soc-thermal: bandgap: Fix build warning if !CONFIG_PM_SLEEP
-
