- 31 Aug, 2010 40 commits
-
-
Neil Munro authored
I have cleaned both files inside the iface directory (fileo rtmp_pci.h and rtmp_usb.h). I am not sure about some of the changes I have made however my adjustments have solved all errors. There were also a few issues on my machine with ap.h on my machine, however I have since cleaned that too. Signed-off-by:
Neil Munro <neilmunro@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Stefan Weil authored
Obviously the wrong spelling was copied a lot of times. A similar patch for the non-staging part of linux is committed by Jiri Kosina. Cc: devel@driverdev.osuosl.org Signed-off-by:
Stefan Weil <weil@mail.berlios.de> Signed-off-by:
-
Ramkumar Ramachandra authored
Replace C99-style comments with C89-style comments, fix some typos, and fix whitespace to use only tabs. Signed-off-by:
Ramkumar Ramachandra <artagnon@gmail.com> Signed-off-by:
-
Julia Lawall authored
An error code is stored in a variable, but 0 is returned instead. Use the variable instead of 0. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Gorskin Ilya authored
Staging: cx25821: clenup warnings found by checkpatch.pl tool in cx25821-audio-upstream.c and cx25821-audio.h. This is a patch to the cx25821-audio-upstream.c and cx25821-audio.h that fixes up a warnings found by checkpatch.pl tool. Signed-off-by:
Ilya Gorskin <Revent82@gmail.com> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Make functions static and move their declarations to the top of the file. Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Randy Dunlap authored
Fix many sparse warnings about data or functions being static. Fix many sparse warnings about data or functions not being used (put them inside #if 0/#endif blocks). Fix sparse warnings about 0 being used for NULL. Fixed a small bit of source formatting when those lines were being modified anyway, but there is still lots of this yet to be done. Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Cc: devel@driverdev.osuosl.org Cc: Arnaud Patard <apatard@mandriva.com> Signed-off-by:
-
Dan Carpenter authored
copy_to_user() returns the number of bytes remaining to be copied, but we want to return a negative error code here. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Kulikov Vasiliy authored
Original code does not call sysfs_remove_group() on error. This can lead to NULL dereference. Signed-off-by:
Kulikov Vasiliy <segooon@gmail.com> Signed-off-by:
-
Kulikov Vasiliy authored
Original code doesn't call kfree(chip) on error. Signed-off-by:
-
Kulikov Vasiliy authored
If stub_probe() failed then do not increase interf_count. In original code sdev was leaked as its interf_count never reaches 0. Signed-off-by:
-
Jarod Wilson authored
On Fri, Aug 13, 2010 at 03:38:40PM +0200, Dan Carpenter wrote: > Speak of left over stuff, it's weird that I didn't notice this before > but gcc complains about an unitialized variable in > imon_incoming_packet(). > > drivers/staging/lirc/lirc_imon.c: In function ‘imon_incoming_packet’: > drivers/staging/lirc/lirc_imon.c:661: warning: ‘chunk_num’ may be used > uninitialized in this function > > I don't know how to fix that, but it looks important. Ew. Yeah, that doesn't look so hot like it is right now. The old lirc_imon driver had chunk_num = buf[7], and made much more extensive use of chunk_num. Simply removing chunk_num and using buf[7] should be fine. Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
-
Kulikov Vasiliy authored
Driver should call disable_pci_device() if it returns from pci_probe() with error. Also it must not be called if pci_request_region() fails as it means that somebody uses device resources and rules the device. Signed-off-by:
-
Kulikov Vasiliy authored
Driver should call disable_pci_device() if it returns from pci_probe() with error. Signed-off-by:
-
Kulikov Vasiliy authored
Driver should call disable_pci_device() if it returns from pci_probe() with error. Signed-off-by:
-
Dan Carpenter authored
acpi_bus_register_driver() returns an int, not acpi_status. It returns zero on success and negative error codes on failure, but acpi_status is unsigned. We can just use "ret" here. Signed-off-by:
-
Dan Carpenter authored
In the original source it would write past the end of the array before returning the error code. Signed-off-by:
-
Dan Carpenter authored
In the original code there was some extra semicolons after the if statement: if (!channel_map[ieee->current_network.channel]); ^^^ >From the indenting it looked like that should be curly braces instead. Also I made some white space changes to stop checkpatch.pl from complaining. Signed-off-by:
-
Dan Carpenter authored
We never use control_req so I removed it. Signed-off-by:
-
Kulikov Vasiliy authored
Driver should call disable_pci_device() if it returns from pci_probe() with error. Signed-off-by:
-
Kulikov Vasiliy authored
Driver should call disable_pci_device() if it returns from pci_probe() with error. Signed-off-by:
-
Kulikov Vasiliy authored
Driver should call disable_pci_device() if it returns from pci_probe() with error. Signed-off-by:
-
Javier Martinez Canillas authored
Use DEFINE_PCI_DEVICE_TABLE() to make xgifb_pci_table const and marked as __devinitconst Signed-off-by:
Javier Martinez Canillas <martinez.javier@gmail.com> Signed-off-by:
-
Javier Martinez Canillas authored
This is the first of a patch series that uses PCI_DEVICE() macro for pci table entries on comedi drivers and thus improving readability. Signed-off-by:
-
Javier Martinez Canillas authored
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability. Signed-off-by:
-
Javier Martinez Canillas authored
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability. Signed-off-by:
-
Javier Martinez Canillas authored
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability. Signed-off-by:
-
Javier Martinez Canillas authored
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability. Signed-off-by:
-
Javier Martinez Canillas authored
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability. Signed-off-by:
-
Javier Martinez Canillas authored
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability. Signed-off-by:
-
Javier Martinez Canillas authored
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability. Signed-off-by:
-
Javier Martinez Canillas authored
Use PCI_DEVICE() macro for pci table entries on comedi driver and thus improves readability. Signed-off-by:
-
