- 15 May, 2012 27 commits
-
-
Gianluca Gennari authored
MPIS based STBs running 3.x kernels and the Enigma2 OS are not able to tune DVB-T channels with the PCTV 290e using the current cxd2820r driver. DVB-T2 channels instead work properly. This patch fixes the problem by changing the condition to break out from the wait lock loop in the "search" function of the cxd2820r demodulator from FE_HAS_SIGNAL to FE_HAS_LOCK. As a consequence, the "search" function of the demodulator driver now returns DVBFE_ALGO_SEARCH_SUCCESS only if the frequency lock is successfully acquired. This behavior seems consistent with other demodulator drivers (e.g. stv090x, hd29l2, stv0900, stb0899, mb86a16). This patch has been successfully tested with DVB-T and DVB-T2 signals, on both PC and the mipsel STB running Enigma2. No apparent side effect has been observed on PC applications like Kaffeine. DVB-C is not available in my country so it's not tested. Signed-off-by:
Gianluca Gennari <gennarone@gmail.com> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Gianluca Gennari authored
Enable the LNA amplifier also for DVB-T (like for DVB-T2 and DVB-C); this greatly improves reception of weak signals without affecting the reception of the strong ones. Experimental data (collected with the mipsel STB) on the weakest frequencies available in my area: LNA OFF: MUX level BER picture RAI mux 4 72% 32000 corrupted TIMB 2 75% 14 OK TVA Vicenza 68% 32000 corrupted RAI mux 2 78% 14 OK LNA ON: MUX level BER picture RAI mux 4 73% 1500 OK TIMB 2 76% 0 OK TVA Vicenza 69% 0 OK RAI mux 2 79% 0 OK Moreover, with LNA enabled, the PCTV 290e was able to pick up 2 new frequencies matching the integrated tuner of my Panasonic G20 TV, which is really good. Signed-off-by:
-
Mauro Carvalho Chehab authored
As reported by Masanari, this macro is using "KERN_ERR" instead of "KERN_ERROR". That would lead into a compilation breakage, if this macro were used somewhere inside the driver. Instead of fixing the macro, as originally proposed, let's just remove the dead code. Reported-by:
Masanari Iida <standby24x7@gmail.com> Signed-off-by:
-
Ezequiel García authored
The patch splits easycap_delete(), which is in charge of buffer deallocation, into smaller functions each deallocating a specific kind of buffer. Signed-off-by:
Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
When the device is probed, this driver allocates audio buffers, and audio urbs. This patch just split this into separate functions, which helps clearing the currently gigantic probe function. Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
This parameter is now initialized at init_easycap(), this way we assure it won't be used uninitialized. Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
When the device is probed, this driver allocates frame buffers, field buffers, isoc buffers and urbs. This patch just split this into separate functions, which helps clearing the currently gigantic probe function. Signed-off-by:
-
Ezequiel García authored
When the device is probed a driver struct is either allocated or retrieved. This operation is logically splitted in several functions. Signed-off-by:
-
Guennadi Liakhovetski authored
Use "enum_framesizes" instead of "enum_fsizes" to more precisely follow the name of the respective ioctl(). Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by:
Sergio Aguirre <sergio.a.aguirre@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
The "ret = 0" assignment in mcam_vidioc_s_fmt_vid_cap() is redundant, because at that location "ret" is anyway guaranteed to be == 0. Signed-off-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Hans Verkuil authored
If the V4L2_EVENT_SUB_FL_SEND_INITIAL was set, then the application expects to receive an initial event of the initial value of the control. However, commit c53c2549 that added the new v4l2_subscribed_event_ops introduced a regression: while the code still queued that initial event the __v4l2_event_queue_fh() function was modified to ignore such requests if sev->elems was 0 (meaning that the event subscription wasn't finished yet). And sev->elems was only set to a non-zero value after the add operation returned. This patch fixes this by passing the elems value to the add function. Then the add function can set it before queuing the initial event. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
* linus/master: (805 commits) tty: Fix LED error return openvswitch: checking wrong variable in queue_userspace_packet() bonding: Fix LACPDU rx_dropped commit. Linux 3.4-rc7 ARM: EXYNOS: fix ctrlbit for exynos5_clk_pdma1 ARM: EXYNOS: use s5p-timer for UniversalC210 board ARM / mach-shmobile: Invalidate caches when booting secondary cores ARM / mach-shmobile: sh73a0 SMP TWD boot regression fix ARM / mach-shmobile: r8a7779 SMP TWD boot regression fix ARM: mach-shmobile: convert ag5evm to use the generic MMC GPIO hotplug helper ARM: mach-shmobile: convert mackerel to use the generic MMC GPIO hotplug helper MAINTAINERS: Add myself as the cpufreq maintainer dm mpath: check if scsi_dh module already loaded before trying to load dm thin: correct module description dm thin: fix unprotected use of prepared_discards list dm thin: reinstate missing mempool_free in cell_release_singleton gpio/exynos: Fix compiler warnings when non-exynos machines are selected gpio: pch9: Use proper flow type handlers powerpc/irq: Fix another case of lazy IRQ state getting out of sync ks8851: Update link status during link change interrupt ... Conflicts: drivers/media/common/tuners/xc5000.c drivers/media/common/tuners/xc5000.h drivers/usb/gadget/uvc_queue.c
-
Il Han authored
The variable ret is used uninitialized. It should be initialized before used. Initialize it. Signed-off-by:
Il Han <corone.il.han@gmail.com> Signed-off-by:
-
Malcolm Priestley authored
On Mon, 2012-05-07 at 07:45 -0300, Mauro Carvalho Chehab wrote: > Malcolm, > > Em 04-04-2012 20:00, Joe Perches escreveu: > > Likely these should be && not || > > > > drivers/scsi/FlashPoint.c: if(bit_cnt != 0 || bit_cnt != 8) > > > drivers/media/dvb/dvb-usb/it913x.c: if (ret == 0 || ret != -EBUSY || ret != -ETIMEDOUT) > > drivers/media/dvb/dvb-usb/it913x.c: if (ret == 0 || ret != -EBUSY || ret != -ETIMEDOUT) > > Could you please take a look on the above? Hmm... yes, thanks, also a bug. Just check for -EBUSY && -ETIMEDOUT Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
joseph daniel authored
The else statement is actually not required, as we can assign AS10X_CMD_ERROR to the error variable directly. Signed-off-by:
joseph daniel <josephdanielwalter@gmail.com> Signed-off-by:
-
Ezequiel García authored
Nobody ever waits on any of these wait_queue's, so this patch removes them completely. Tested by compilation only. Signed-off-by:
-
Arnd Bergmann authored
Drivers that refer to a __devexit function in an operations structure need to annotate that pointer with __devexit_p so replace it with a NULL pointer when the section gets discarded. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Arnd Bergmann authored
Davinci VIDEO_VPFE_CAPTURE depends on I2C, so reflect that in Kconfig to avoid build failures in random configurations. Signed-off-by:
-
Arnd Bergmann authored
The IR sony decoder is making use of 'bitrev8' that, in turn, requires BITREVERSE. Signed-off-by:
-
Arnd Bergmann authored
This avoids getting drivers/media/video/em28xx/em28xx-dvb.c:721: \ undefined reference to `drxd_attach' Signed-off-by: -
Arnd Bergmann authored
MMIO registers are __iomem tokens in virtual address space, not integers. Signed-off-by:
-
Mark Brown authored
The legacy I2C PM functions have been deprecated and warning on boot for over a year, convert the drivers still using them to dev_pm_ops. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Dan Carpenter authored
This looks like a cut an paste error. This is a two byte array but we use 8 as a length parameter. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
- 14 May, 2012 13 commits
-
-
Daniel Drake authored
For the ov7670 camera to return images at the requested frame rate, it needs to make calculations based on the clock speed, which is a completely external factor (depends on the wiring of the system). On the XO-1.5, which is the only known via-camera user, the camera is clocked at 90MHz. Pass this information to the ov7670 driver, to fix an issue where a framerate of 3x the requested amount was being provided. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel García authored
Signed-off-by:
-
Ezequiel Garcia authored
The list_head struct usage was fully removed by commit d7aa8020. Signed-off-by:
-
Ezequiel Garcia authored
This cleans namespace a bit by making em28xx_card_setup() em28xx_pre_card_setup() static functions. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-mediaLinus Torvalds authored
Pull media fixes from Mauro Carvalho Chehab: "For a some fix patches for v3.4, including a regression fix at DVB core" Fix up trivial conflicts in Documentation/feature-removal-schedule.txt * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] gspca - sonixj: Fix a zero divide in isoc interrupt [media] media: videobuf2-dma-contig: include header for exported symbols [media] media: videobuf2-dma-contig: quiet sparse noise about plain integer as NULL pointer [media] media: vb2-memops: Export vb2_get_vma symbol [media] s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS [media] s5p-fimc: Fix locking in subdev set_crop op [media] dvb_frontend: fix a regression with DVB-S zig-zag [media] fintek-cir: change || to && [media] V4L: Schedule V4L2_CID_HCENTER, V4L2_CID_VCENTER controls for removal [media] rc: Postpone ISR registration [media] marvell-cam: fix an ARM build error [media] V4L: soc-camera: protect hosts during probing from overzealous user-space
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "The main purpose of this pull request is to fix up the erroneous bonding patch I applied last round. I meant to apply v4 of the patch from Jiri but I applied v3 by accident. Mea culpa. Also, eagle eyed Dan Carpenter noticed that openvswitch has one of those "X = alloc(); if (!Y)" mistakes, test the proper pointer instead." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: openvswitch: checking wrong variable in queue_userspace_packet() bonding: Fix LACPDU rx_dropped commit.
-
Hans Verkuil authored
Rename the function v4l2_dont_use_lock to v4l2_disable_ioctl_locking, and rename v4l2_dont_use_cmd to v4l2_disable_ioctl. Signed-off-by:
-
Hans Verkuil authored
This flag is for legacy drivers only and will go away in the future. A note regarding commit 5126f259 (v4l2-dev: add flag to have the core lock all file operations): That commit message suggests that by not taking the core lock for fops other than unlocked_ioctl all problems relating to AB-BA locking and mm->mmap_sem are solved. This is not the case. More work needs to be done by moving the core lock further down into video_ioctl2. It should only be taken after the copy_from/to_user calls are done. Signed-off-by:
-
Hans Verkuil authored
Thanks to Laurent Pinchart for pointing out that this information was missing. Signed-off-by:
-
Hans Verkuil authored
Besides the usual inconsistencies in input enumeration there was also a kernel crash if you tried to poll on a vbi node. The checks for sliced vbi output vs vbi capture were not complete enough. Signed-off-by:
-
Hans Verkuil authored
Useful to set the alpha component for the pixel formats with an alpha channel. Signed-off-by:
-
Hans Verkuil authored
This is very useful for testing whether userspace can handle the various formats correctly. Signed-off-by:
-
