On Fedora, linking static glibc requires the glibc-static RPM package,
which is not part of the glibc-devel package.

CONFIG_CC_CAN_LINK does not check the capability of static linking,
so you can enable CONFIG_BPFILTER_UMH, then fail to build:

    HOSTLD  net/bpfilter/bpfilter_umh
  /usr/bin/ld: cannot find -lc
  collect2: error: ld returned 1 exit status

Add CONFIG_CC_CAN_LINK_STATIC, and make CONFIG_BPFILTER_UMH depend
on it.
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>

bpfilter_umh is built for the default machine bit of the compiler,
which may not match to the bit size of the kernel.

This happens in the scenario below:

You can use biarch GCC that defaults to 64-bit for building the 32-bit
kernel. In this case, Kbuild passes -m32 to teach the compiler to
produce 32-bit kernel space objects. However, it is missing when
building bpfilter_umh. It is built as a 64-bit ELF, and then embedded
into the 32-bit kernel.

The 32-bit kernel and 64-bit umh is a bad combination.

In theory, we can have 32-bit umh running on 64-bit kernel, but we do
not have a good reason to support such a usecase.

The best is to match the bit size between them.

Pass -m32 or -m64 to the umh build command if it is found in
$(KBUILD_CFLAGS). Evaluate CC_CAN_LINK against the kernel bit-size.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

always, hostprogs-y, and hostprogs-m are deprecated.

There is no user in upstream code, but I will keep them for external
modules. I want to remove them entirely someday. Prompt downstream
users for the migration.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

cmd_dtc takes the additional parameter $(2) to select the target
format, dtb or yaml. This makes things complicated when it is used
with cmd_and_fixdep and if_changed_rule. I actually stumbled on this.
See commit 3d4b2238 ("kbuild: fix DT binding schema rule again to
avoid needless rebuilds").

Extract the suffix part of the target instead of passing the parameter.
Fortunately, this works for both $(obj)/%.dtb and $(obj)/%.dt.yaml .
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

$(AS) is not used anywhere in the kernel build, hence commit
aa824e0c ("kbuild: remove AS variable") killed it.

Remove the left-over code in arch/{arm,arm64}/Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Will Deacon <will@kernel.org>

This notice has been here for a while. Remove it entirely now.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This reverts commit 87284978.

samples/ contains only sub-directories.

Because OBJECT_FILES_NON_STANDARD does not work recursively,
this line has no effect.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

scripts/mkcompile_h runs $(CC) just for getting the version string.
Reuse CONFIG_CC_VERSION_TEXT for optimization.

For GCC, this slightly changes the version string. I do not think it
is a big deal as we do not have the defined format for LINUX_COMPILER.
In fact, the recent commit 4dcc9a88 ("kbuild: mkcompile_h:
Include $LD version in /proc/version") added the linker version.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

This omits system headers from the generated header dependency.

System headers are not updated unless you upgrade the compiler. Nor do
they contain CONFIG options, so fixdep does not need to parse them.

Having said that, the effect of this optimization will be quite small
because the kernel code generally does not include system headers
except <stdarg.h>. Host programs include a lot of system headers,
but there are not so many in the kernel tree.

At first, keeping system headers in .*.cmd files might be useful to
detect the compiler update, but there is no guarantee that <stdarg.h>
is included from every file. So, I implemented a more reliable way in
the previous commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

Commit 21c54b77 ("kconfig: show compiler version text in the top
comment") added the environment variable, CC_VERSION_TEXT in the comment
of the top Kconfig file. It can detect the compiler update, and invoke
the syncconfig because all environment variables referenced in Kconfig
files are recorded in include/config/auto.conf.cmd

This commit makes it a CONFIG option in order to ensure the full rebuild
when the compiler is updated.

This works like follows:

include/config/kconfig.h contains "CONFIG_CC_VERSION_TEXT" in the comment
block.

The top Makefile specifies "-include $(srctree)/include/linux/kconfig.h"
to guarantee it is included from all kernel source files.

fixdep parses every source file and all headers included from it,
searching for words prefixed with "CONFIG_". Then, fixdep finds
CONFIG_CC_VERSION_TEXT in include/config/kconfig.h and adds
include/config/cc/version/text.h into every .*.cmd file.

When the compiler is updated, syncconfig is invoked because init/Kconfig
contains the reference to the environment variable CC_VERTION_TEXT.
CONFIG_CC_VERSION_TEXT is updated to the new version string, and
include/config/cc/version/text.h is touched.

In the next rebuild, Make will rebuild every files since the timestamp
of include/config/cc/version/text.h is newer than that of target.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

The result of '$(CC) --version | head -n 1' has already been computed
by the top Makefile, and stored in the environment variable,
CC_VERSION_TEXT.

'echo' is cheaper than the two commands $(CC) and 'head' although this
optimization is not noticeable level.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>

Since commit a83e4ca2 ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=unicore32 clean' emits error
messages as follows:

  $ make ARCH=unicore32 clean
  gcc: error: missing argument to '-Wframe-larger-than='
  gcc: error: missing argument to '-Wframe-larger-than='

We do not care compiler flags when cleaning.

Use the '=' operator for lazy expansion because we do not use
GNU_LIBC_A or GNU_LIBGCC_A when cleaning.

Fixes: a83e4ca2 ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>

'make ARCH=h8300 clean' emits error messages as follows:

  $ make ARCH=h8300 clean
  gcc: error: missing argument to '-Wframe-larger-than='
  gcc: error: unrecognized command line option '-mint32'

You can suppress the second one by setting the correct CROSS_COMPILE=,
but we should not require any compiler for cleaning.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>

'make ARCH=hexagon clean' emits an error message as follows:

  $ make ARCH=hexagon clean
  gcc: error: unrecognized command line option '-G0'

You can suppress it by setting the correct CROSS_COMPILE=,
but we should not require any compiler for cleaning.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>

Since commit a83e4ca2 ("kbuild: remove cc-option switch from
-Wframe-larger-than="), 'make ARCH=um clean' emits an error message
as follows:

  $ make ARCH=um clean
  gcc: error: missing argument to '-Wframe-larger-than='

We do not care compiler flags when cleaning.

Use the '=' operator for lazy expansion because we do not use
LDFLAGS_pcap.o or LDFLAGS_vde.o when cleaning.

While I was here, I removed the redundant -r option because it
already exists in the recipe.

Fixes: a83e4ca2 ("kbuild: remove cc-option switch from -Wframe-larger-than=")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com> [build]

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Ensure that direct mapping alias is always flushed when changing
     page attributes. The optimization for small ranges failed to do so
     when the virtual address was in the vmalloc or module space.

   - Unbreak the trace event registration for syscalls without arguments
     caused by the refactoring of the SYSCALL_DEFINE0() macro.

   - Move the printk in the TSC deadline timer code to a place where it
     is guaranteed to only be called once during boot and cannot be
     rearmed by clearing warn_once after boot. If it's invoked post boot
     then lockdep rightfully complains about a potential deadlock as the
     calling context is different.

   - A series of fixes for objtool and the ORC unwinder addressing
     variety of small issues:

       - Stack offset tracking for indirect CFAs in objtool ignored
         subsequent pushs and pops

       - Repair the unwind hints in the register clearing entry ASM code

       - Make the unwinding in the low level exit to usermode code stop
         after switching to the trampoline stack. The unwind hint is no
         longer valid and the ORC unwinder emits a warning as it can't
         find the registers anymore.

       - Fix unwind hints in switch_to_asm() and rewind_stack_do_exit()
         which caused objtool to generate bogus ORC data.

       - Prevent unwinder warnings when dumping the stack of a
         non-current task as there is no way to be sure about the
         validity because the dumped stack can be a moving target.

       - Make the ORC unwinder behave the same way as the frame pointer
         unwinder when dumping an inactive tasks stack and do not skip
         the first frame.

       - Prevent ORC unwinding before ORC data has been initialized

       - Immediately terminate unwinding when a unknown ORC entry type
         is found.

       - Prevent premature stop of the unwinder caused by IRET frames.

       - Fix another infinite loop in objtool caused by a negative
         offset which was not catched.

       - Address a few build warnings in the ORC unwinder and add
         missing static/ro_after_init annotations"

* tag 'x86-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/unwind/orc: Move ORC sorting variables under !CONFIG_MODULES
  x86/apic: Move TSC deadline timer debug printk
  ftrace/x86: Fix trace event registration for syscalls without arguments
  x86/mm/cpa: Flush direct map alias during cpa
  objtool: Fix infinite loop in for_offset_range()
  x86/unwind/orc: Fix premature unwind stoppage due to IRET frames
  x86/unwind/orc: Fix error path for bad ORC entry type
  x86/unwind/orc: Prevent unwinding before ORC initialization
  x86/unwind/orc: Don't skip the first frame for inactive tasks
  x86/unwind: Prevent false warnings for non-current tasks
  x86/unwind/orc: Convert global variables to static
  x86/entry/64: Fix unwind hints in rewind_stack_do_exit()
  x86/entry/64: Fix unwind hints in __switch_to_asm()
  x86/entry/64: Fix unwind hints in kernel exit path
  x86/entry/64: Fix unwind hints in register clearing code
  objtool: Fix stack offset tracking for indirect CFAs

Pull objtool fix from Thomas Gleixner:
 "A single fix for objtool to prevent an infinite loop in the
  jump table search which can be triggered when building the
  kernel with '-ffunction-sections'"

* tag 'objtool-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Fix infinite loop in find_jump_table()

Pull locking fix from Thomas Gleixner:
 "A single fix for the fallout of the recent futex uacess rework.

  With those changes GCC9 fails to analyze arch_futex_atomic_op_inuser()
  correctly and emits a 'maybe unitialized' warning. While we usually
  ignore compiler stupidity the conditional store is pointless anyway
  because the correct case has to store. For the fault case the extra
  store does no harm"

* tag 'locking-urgent-2020-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ARM: futex: Address build warning

Pull iommu fixes from Joerg Roedel:

 - Race condition fixes for the AMD IOMMU driver.

   These are five patches fixing two race conditions around
   increase_address_space(). The first race condition was around the
   non-atomic update of the domain page-table root pointer and the
   variable containing the page-table depth (called mode). This is fixed
   now be merging page-table root and mode into one 64-bit field which
   is read/written atomically.

   The second race condition was around updating the page-table root
   pointer and making it public before the hardware caches were flushed.
   This could cause addresses to be mapped and returned to drivers which
   are not reachable by IOMMU hardware yet, causing IO page-faults. This
   is fixed too by adding the necessary flushes before a new page-table
   root is published.

   Related to the race condition fixes these patches also add a missing
   domain_flush_complete() barrier to update_domain() and a fix to bail
   out of the loop which tries to increase the address space when the
   call to increase_address_space() fails.

   Qian was able to trigger the race conditions under high load and
   memory pressure within a few days of testing. He confirmed that he
   has seen no issues anymore with the fixes included here.

 - Fix for a list-handling bug in the VirtIO IOMMU driver.

* tag 'iommu-fixes-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/virtio: Reverse arguments to list_add
  iommu/amd: Do not flush Device Table in iommu_map_page()
  iommu/amd: Update Device Table in increase_address_space()
  iommu/amd: Call domain_flush_complete() in update_domain()
  iommu/amd: Do not loop forever when trying to increase address space
  iommu/amd: Fix race in increase_address_space()/fetch_pte()

Pull block fixes from Jens Axboe:

 - a small series fixing a use-after-free of bdi name (Christoph,Yufen)

 - NVMe fix for a regression with the smaller CQ update (Alexey)

 - NVMe fix for a hang at namespace scanning error recovery (Sagi)

 - fix race with blk-iocost iocg->abs_vdebt updates (Tejun)

* tag 'block-5.7-2020-05-09' of git://git.kernel.dk/linux-block:
  nvme: fix possible hang when ns scanning fails during error recovery
  nvme-pci: fix "slimmer CQ head update"
  bdi: add a ->dev_name field to struct backing_dev_info
  bdi: use bdi_dev_name() to get device name
  bdi: move bdi_dev_name out of line
  vboxsf: don't use the source name in the bdi name
  iocost: protect iocg->abs_vdebt with iocg->waitq.lock

It seems that for whatever reason, gcc-10 ends up not inlining a couple
of functions that used to be inlined before.  Even if they only have one
single callsite - it looks like gcc may have decided that the code was
unlikely, and not worth inlining.

The code generation difference is harmless, but caused a few new section
mismatch errors, since the (now no longer inlined) function wasn't in
the __init section, but called other init functions:

   Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap()
   Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap()

So add the appropriate __init annotation to make modpost not complain.
In both cases there were trivially just a single callsite from another
__init function.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull RISC-V fixes from Palmer Dabbelt:
 "A smattering of fixes and cleanups:

   - Dead code removal.

   - Exporting riscv_cpuid_to_hartid_mask for modules.

   - Per-CPU tracking of ISA features.

   - Setting max_pfn correctly when probing memory.

   - Adding a note to the VDSO so glibc can check the kernel's version
     without a uname().

   - A fix to force the bootloader to initialize the boot spin tables,
     which still get used as a fallback when SBI-0.1 is enabled"

* tag 'riscv-for-linus-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: Remove unused code from STRICT_KERNEL_RWX
  riscv: force __cpu_up_ variables to put in data section
  riscv: add Linux note to vdso
  riscv: set max_pfn to the PFN of the last page
  RISC-V: Remove N-extension related defines
  RISC-V: Add bitmap reprensenting ISA features common across CPUs
  RISC-V: Export riscv_cpuid_to_hartid_mask() API

gcc-10 has started warning about conflicting types for a few new
built-in functions, particularly 'free()'.

This results in warnings like:

   crypto/xts.c:325:13: warning: conflicting types for built-in function ‘free’; expected ‘void(void *)’ [-Wbuiltin-declaration-mismatch]

because the crypto layer had its local freeing functions called
'free()'.

Gcc-10 is in the wrong here, since that function is marked 'static', and
thus there is no chance of confusion with any standard library function
namespace.

But the simplest thing to do is to just use a different name here, and
avoid this gcc mis-feature.

[ Side note: gcc knowing about 'free()' is in itself not the
  mis-feature: the semantics of 'free()' are special enough that a
  compiler can validly do special things when seeing it.

  So the mis-feature here is that gcc thinks that 'free()' is some
  restricted name, and you can't shadow it as a local static function.

  Making the special 'free()' semantics be a function attribute rather
  than tied to the name would be the much better model ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gcc-10 now warns about passing aliasing pointers to functions that take
restricted pointers.

That's actually a great warning, and if we ever start using 'restrict'
in the kernel, it might be quite useful.  But right now we don't, and it
turns out that the only thing this warns about is an idiom where we have
declared a few functions to be "printf-like" (which seems to make gcc
pick up the restricted pointer thing), and then we print to the same
buffer that we also use as an input.

And people do that as an odd concatenation pattern, with code like this:

    #define sysfs_show_gen_prop(buffer, fmt, ...) \
        snprintf(buffer, PAGE_SIZE, "%s"fmt, buffer, __VA_ARGS__)

where we have 'buffer' as both the destination of the final result, and
as the initial argument.

Yes, it's a bit questionable.  And outside of the kernel, people do have
standard declarations like

    int snprintf( char *restrict buffer, size_t bufsz,
                  const char *restrict format, ... );

where that output buffer is marked as a restrict pointer that cannot
alias with any other arguments.

But in the context of the kernel, that 'use snprintf() to concatenate to
the end result' does work, and the pattern shows up in multiple places.
And we have not marked our own version of snprintf() as taking restrict
pointers, so the warning is incorrect for now, and gcc picks it up on
its own.

If we do start using 'restrict' in the kernel (and it might be a good
idea if people find places where it matters), we'll need to figure out
how to avoid this issue for snprintf and friends.  But in the meantime,
this warning is not useful.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the final array bounds warning removal for gcc-10 for now.

Again, the warning is good, and we should re-enable all these warnings
when we have converted all the legacy array declaration cases to
flexible arrays. But in the meantime, it's just noise.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When the controller is reconnecting, the host fails I/O and admin
commands as the host cannot reach the controller. ns scanning may
revalidate namespaces during that period and it is wrong to remove
namespaces due to these failures as we may hang (see 205da243).

One command that may fail is nvme_identify_ns_descs. Since we return
success due to having ns identify descriptor list optional, we continue
to compare ns identifiers in nvme_revalidate_disk, obviously fail and
return -ENODEV to nvme_validate_ns, which will remove the namespace.

Exactly what we don't want to happen.

Fixes: 22802bf7 ("nvme: Namepace identification descriptor list is optional")
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pre-incrementing ->cq_head can't be done in memory because OOB value
can be observed by another context.

This devalues space savings compared to original code :-\

	$ ./scripts/bloat-o-meter ../vmlinux-000 ../obj/vmlinux
	add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-32 (-32)
	Function                                     old     new   delta
	nvme_poll_irqdisable                         464     456      -8
	nvme_poll                                    455     447      -8
	nvme_irq                                     388     380      -8
	nvme_dev_disable                             955     947      -8

But the code is minimal now: one read for head, one read for q_depth,
one increment, one comparison, single instruction phase bit update and
one write for new head.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Fixes: e2a366a4 ("nvme-pci: slimmer CQ head update")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Cache a copy of the name for the life time of the backing_dev_info
structure so that we can reference it even after unregistering.

Fixes: 68f23b89 ("memcg: fix a crash in wb_workfn when a device disappears")
Reported-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Use the common interface bdi_dev_name() to get device name.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>

Add missing <linux/backing-dev.h> include BFQ
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is another fine warning, related to the 'zero-length-bounds' one,
but hitting the same historical code in the kernel.

Because C didn't historically support flexible array members, we have
code that instead uses a one-sized array, the same way we have cases of
zero-sized arrays.

The one-sized arrays come from either not wanting to use the gcc
zero-sized array extension, or from a slight convenience-feature, where
particularly for strings, the size of the structure now includes the
allocation for the final NUL character.

So with a "char name[1];" at the end of a structure, you can do things
like

       v = my_malloc(sizeof(struct vendor) + strlen(name));

and avoid the "+1" for the terminator.

Yes, the modern way to do that is with a flexible array, and using
'offsetof()' instead of 'sizeof()', and adding the "+1" by hand.  That
also technically gets the size "more correct" in that it avoids any
alignment (and thus padding) issues, but this is another long-term
cleanup thing that will not happen for 5.7.

So disable the warning for now, even though it's potentially quite
useful.  Having a slew of warnings that then hide more urgent new issues
is not an improvement.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a fine warning, but we still have a number of zero-length arrays
in the kernel that come from the traditional gcc extension.  Yes, they
are getting converted to flexible arrays, but in the meantime the gcc-10
warning about zero-length bounds is very verbose, and is hiding other
issues.

I missed one actual build failure because it was hidden among hundreds
of lines of warning.  Thankfully I caught it on the second go before
pushing things out, but it convinced me that I really need to disable
the new warnings for now.

We'll hopefully be all done with our conversion to flexible arrays in
the not too distant future, and we can then re-enable this warning.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have some rather random rules about when we accept the
"maybe-initialized" warnings, and when we don't.

For example, we consider it unreliable for gcc versions < 4.9, but also
if -O3 is enabled, or if optimizing for size.  And then various kernel
config options disabled it, because they know that they trigger that
warning by confusing gcc sufficiently (ie PROFILE_ALL_BRANCHES).

And now gcc-10 seems to be introducing a lot of those warnings too, so
it falls under the same heading as 4.9 did.

At the same time, we have a very straightforward way to _enable_ that
warning when wanted: use "W=2" to enable more warnings.

So stop playing these ad-hoc games, and just disable that warning by
default, with the known and straight-forward "if you want to work on the
extra compiler warnings, use W=123".

Would it be great to have code that is always so obvious that it never
confuses the compiler whether a variable is used initialized or not?
Yes, it would.  In a perfect world, the compilers would be smarter, and
our source code would be simpler.

That's currently not the world we live in, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull io_uring fixes from Jens Axboe:

 - Fix finish_wait() balancing in file cancelation (Xiaoguang)

 - Ensure early cleanup of resources in ring map failure (Xiaoguang)

 - Ensure IORING_OP_SLICE does the right file mode checks (Pavel)

 - Remove file opening from openat/openat2/statx, it's not needed and
   messes with O_PATH

* tag 'io_uring-5.7-2020-05-08' of git://git.kernel.dk/linux-block:
  io_uring: don't use 'fd' for openat/openat2/statx
  splice: move f_mode checks to do_{splice,tee}()
  io_uring: handle -EFAULT properly in io_uring_setup()
  io_uring: fix mismatched finish_wait() calls in io_uring_cancel_files()

Pull SCSI fixes from James Bottomley:
 "Four minor fixes, all in drivers (qla2xxx, ibmvfc, ibmvscsi)"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix WARN_ON during event pool release
  scsi: ibmvfc: Don't send implicit logouts prior to NPIV login
  scsi: qla2xxx: Delete all sessions before unregister local nvme port
  scsi: qla2xxx: Fix hang when issuing nvme disconnect-all in NPIV

Pull ceph fixes from Ilya Dryomov:
 "Fixes for an endianness handling bug that prevented mounts on
  big-endian arches, a spammy log message and a couple error paths.

  Also included a MAINTAINERS update"

* tag 'ceph-for-5.7-rc5' of git://github.com/ceph/ceph-client:
  ceph: demote quotarealm lookup warning to a debug message
  MAINTAINERS: remove myself as ceph co-maintainer
  ceph: fix double unlock in handle_cap_export()
  ceph: fix special error code in ceph_try_get_caps()
  ceph: fix endianness bug when handling MDS session feature bits

A misconfigured cephx can easily result in having the kernel client
flooding the logs with:

  ceph: Can't lookup inode 1 (err: -13)

Change this message to debug level.

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/44546Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Pull char/misc driver fixes from Greg KH:
 "Here are some small driver fixes for 5.7-rc5 that resolve a number of
  minor reported issues:

   - mhi bus driver fixes found as people actually use the code

   - phy driver fixes and compat string additions

   - most driver fix due to link order changing when the core moved out
     of staging

   - mei driver fix

   - interconnect build warning fix

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  bus: mhi: core: Fix channel device name conflict
  bus: mhi: core: Fix typo in comment
  bus: mhi: core: Offload register accesses to the controller
  bus: mhi: core: Remove link_status() callback
  bus: mhi: core: Make sure to powerdown if mhi_sync_power_up fails
  bus: mhi: Fix parsing of mhi_flags
  mei: me: disable mei interface on LBG servers.
  phy: qualcomm: usb-hs-28nm: Prepare clocks in init
  MAINTAINERS: Add Vinod Koul as Generic PHY co-maintainer
  interconnect: qcom: Move the static keyword to the front of declaration
  most: core: use function subsys_initcall()
  bus: mhi: core: Fix a NULL vs IS_ERR check in mhi_create_devices()
  phy: qcom-qusb2: Re add "qcom,sdm845-qusb2-phy" compat string
  phy: tegra: Select USB_COMMON for usb_get_maximum_speed()

Pull driver core fixes from Greg KH:
 "Here are a number of small driver core fixes for 5.7-rc5 to resolve a
  bunch of reported issues with the current tree.

  Biggest here are the reverts and patches from John Stultz to resolve a
  bunch of deferred probe regressions we have been seeing in 5.7-rc
  right now.

  Along with those are some other smaller fixes:

   - coredump crash fix

   - devlink fix for when permissive mode was enabled

   - amba and platform device dma_parms fixes

   - component error silenced for when deferred probe happens

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  regulator: Revert "Use driver_deferred_probe_timeout for regulator_init_complete_work"
  driver core: Ensure wait_for_device_probe() waits until the deferred_probe_timeout fires
  driver core: Use dev_warn() instead of dev_WARN() for deferred_probe_timeout warnings
  driver core: Revert default driver_deferred_probe_timeout value to 0
  component: Silence bind error on -EPROBE_DEFER
  driver core: Fix handling of fw_devlink=permissive
  coredump: fix crash when umh is disabled
  amba: Initialize dma_parms for amba devices
  driver core: platform: Initialize dma_parms for platform devices

Pull staging driver fixes from Greg KH:
 "Here are three small driver fixes for 5.7-rc5.

  Two of these are documentation fixes:

   - MAINTAINERS update due to removed driver

   - removing Wolfram from the ks7010 driver TODO file

  The other patch is a real fix:

   - fix gasket driver to proper check the return value of a call

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: gasket: Check the return value of gasket_get_bar_index()
  staging: ks7010: remove me from CC list
  MAINTAINERS: remove entry after hp100 driver removal