- 20 Jul, 2008 40 commits
-
-
Magnus Damm authored
The SuperH Mobile CEU hardware supports 16-bit width bus, so extend the soc_camera code with SOCAM_DATAWIDTH_16. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Magnus Damm authored
This patch moves the spinlock handling from soc_camera.c to the actual camera host driver. The spinlock_alloc/free callbacks are replaced with code in init_videobuf(). So far all camera host drivers implement their own spinlock_alloc/free methods anyway, and videobuf_queue_core_init() BUGs on a NULL spinlock argument, so, new camera host drivers will not forget to provide a spinlock when initialising their videobuf queues. Signed-off-by:
-
Paulius Zaleckas authored
Makes SoC camera videobuf independent. Includes all necessary changes for PXA camera driver (currently the only driver using soc_camera in the mainline). These changes are important for the future soc_camera based drivers. Signed-off-by:
Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by:
-
Oliver Endriss authored
Fix build with CONFIG_INPUT_EVDEV=n (Bug #11042). Thanks to Toralf Frster <toralf.foerster@gmx.de> for reporting. Thanks-to: Toralf Frster <toralf.foerster@gmx.de> Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Oliver Endriss authored
Fix compiler warning caused by a typo in the tda10023_attach dummy routine. Signed-off-by:
-
Andy Walls authored
cx18: added in cx18_ir_reset_gpio function for lirc_pvr150 like module. Also added the ability to reset the IR chip via ioctl like ivtv. This needs the mutex to protect gpio_dir and gpio_val in struct cx18 as gpio changes can come from a few different asynchronous sources now. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
cx18: Add locking for struct cx18 GPIO state variables in anticpation of adding IR microcontroller reset support for use by external IR modules. Signed-off-by:
-
Michael Krufky authored
Fix the build error: smscoreapi.c:689: error: 'uintptr_t' undeclared Thanks to Peter Schlaf for reporting this. Cc: Peter Schlaf <peter.schlaf@web.de> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Michael Krufky authored
Fix the following warnings generated by checkpatch.pl: WARNING: Use #include <linux/io.h> instead of <asm/io.h> 251: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:30: +#include <asm/io.h> WARNING: Use #include <linux/scatterlist.h> instead of <asm/scatterlist.h> 1566: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:29: +#include <asm/scatterlist.h> Signed-off-by:
-
Hermann Pitton authored
saa7134: add a separate entry for the ASUSTeK P7131 analog only and do some eeprom detection to escape from the TVFM7135 with the same PCI subsystem on auto detection. Signed-off-by:Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
-
Daniel Drake authored
For VIDIOC_G_FMT/VIDIOC_TRY_FMT, the V4L2 API spec states: "Drivers should not return an error code unless the input is ambiguous" "Very simple, inflexible devices may even ignore all input and always return the default parameters." "When the requested buffer type is not supported drivers return an EINVAL error code." i.e. returning errors for unsupported fields is bad, and it's ok to unconditionally overwrite user-requested settings This patch makes ov7670 meet that behaviour, and brings it in line with other drivers e.g. stk-webcam. It also fixes compatibility with (unpatched) gstreamer. Signed-off-by:
Daniel Drake <dsd@laptop.org> Acked-by:
Jonathan Corbet <corbet@lwn.net> Signed-off-by:
-
Dean Anderson authored
This patch fixes some coding style issues. It also fixes a NULL de-reference on driver unload. The permissions for the module parameters were changed to 0644. Signed-off-by:
Dean Anderson <dean@sensoray.com> Signed-off-by:
-
Jean Delvare authored
Signed-off-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Jean Delvare authored
This has been commented out for years, it's about time to get rid of it. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Assign the following firmware filenames: sms1xxx-stellar-dvbt-01.fw sms1xxx-nova-a-dvbt-01.fw sms1xxx-nova-b-dvbt-01.fw Signed-off-by:
-
Michael Krufky authored
Add the capability to define device-specific firmware filenames for the SMS1010, with a mechanism to fall back to the generic firmware if the device-specific firmware is not present. Signed-off-by:
-
Michael Krufky authored
remove typedef struct mutex kmutex_t fix one line > 80 columns Signed-off-by:
-
Michael Krufky authored
Fix the following build warning: smscoreapi.c: In function 'smscore_detect_mode': smscoreapi.c:689: warning: cast from pointer to integer of different size smscoreapi.c:689: warning: cast to pointer from integer of different size smscoreapi.c: In function 'smscore_set_device_mode': smscoreapi.c:820: warning: cast from pointer to integer of different size smscoreapi.c:820: warning: cast to pointer from integer of different size ...and fix the following OOPS on 64bit kernels: [ 717.263667] usb 6-4: new high speed USB device using ehci_hcd and address 2 [ 717.396386] usb 6-4: configuration #1 chosen from 1 choice [ 717.473650] Unable to handle kernel paging request at 0000000000c02000 RIP: [ 717.473657] [<ffffffff88db9edc>] :sms1xxx:smscore_set_device_mode+0x22c/0x4a0 [ 717.473669] PGD 3c6f7067 PUD 3d484067 PMD 0 [ 717.473674] Oops: 0002 [1] SMP [ 717.473678] CPU 0 [Modules linked in snipped] [ 717.473773] Pid: 8380, comm: modprobe Tainted: P 2.6.24-16-generic #1 [ 717.473776] RIP: 0010:[<ffffffff88db9edc>] [<ffffffff88db9edc>] :sms1xxx:smscore_set_device_mode+0x22c/0x4a0 [ 717.473784] RSP: 0018:ffff81003d495ba8 EFLAGS: 00010206 [ 717.473786] RAX: ffff81003d8cd8d0 RBX: ffff81003d8cd800 RCX: ffff81003d8cd8d0 [ 717.473788] RDX: 0000000000000008 RSI: ffff81003f080070 RDI: ffff81003d8cd800 [ 717.473791] RBP: 0000000000000004 R08: ffff81003ec0104b R09: ffffffffffffffff [ 717.473793] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000c02000 [ 717.473796] R13: 00000000fffffff4 R14: ffff810000c02000 R15: ffff81003d8cd878 [ 717.473799] FS: 00007f70a680f6e0(0000) GS:ffffffff805b0000(0000) knlGS:0000000000000000 [ 717.473801] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 717.473804] CR2: 0000000000c02000 CR3: 000000003c68b000 CR4: 00000000000006e0 [ 717.473806] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 717.473809] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 717.473812] Process modprobe (pid: 8380, threadinfo ffff81003d494000, task ffff81003d2fc000) [ 717.473814] Stack: ffff81003d8cd800 ffff81003d8cd800 0000000000000000 ffff81003c6d8000 [ 717.473820] ffff81003dcac800 0000000000000008 ffffc20000787bb0 ffffffff88dba16c [ 717.473825] ffff81003dcac800 000000000000000a 0000000000000000 ffffffff88dbb2fa [ 717.473829] Call Trace: [ 717.473866] [<ffffffff88dba16c>] :sms1xxx:smscore_start_device+0x1c/0xb0 [ 717.473885] [<ffffffff88dbb2fa>] :sms1xxx:smsusb_probe+0x29a/0x670 [ 717.473929] [<ffffffff88dbaca0>] :sms1xxx:smsusb_sendrequest+0x0/0x30 [ 717.473965] [<ffffffff804614d9>] mutex_lock+0x9/0x20 [ 717.473998] [<ffffffff8806c42e>] :usbcore:usb_autopm_do_device+0x8e/0x130 [ 717.474040] [<ffffffff8806d33a>] :usbcore:usb_probe_interface+0xda/0x160 [ 717.474067] [<ffffffff803b9f4c>] driver_probe_device+0x9c/0x1b0 [ 717.474091] [<ffffffff803ba219>] __driver_attach+0xc9/0xd0 [ 717.474107] [<ffffffff803ba150>] __driver_attach+0x0/0xd0 [ 717.474115] [<ffffffff803b918d>] bus_for_each_dev+0x4d/0x80 [ 717.474156] [<ffffffff803b959c>] bus_add_driver+0xac/0x220 [ 717.474203] [<ffffffff8806cde9>] :usbcore:usb_register_driver+0xa9/0x120 [ 717.474232] [<ffffffff88dbb00b>] :sms1xxx:smsusb_register+0x1b/0x70 [ 717.474243] [<ffffffff88dba50c>] :sms1xxx:smscore_module_init+0x7c/0xb0 [ 717.474253] [<ffffffff80263b6e>] sys_init_module+0x18e/0x1a90 [ 717.474426] [<ffffffff8020c37e>] system_call+0x7e/0x83 [ 717.474490] [ 717.474491] [ 717.474492] Code: 66 41 c7 04 24 9c 02 41 c6 44 24 02 00 4c 89 e6 41 c6 44 24 [ 717.474506] RIP [<ffffffff88db9edc>] :sms1xxx:smscore_set_device_mode+0x22c/0x4a0 [ 717.474513] RSP <ffff81003d495ba8> [ 717.474515] CR2: 0000000000c02000 [ 717.474521] ---[ end trace 52d9c6f207be106a ]--- Signed-off-by:
-
Michael Krufky authored
Provide an option to enable / disable support for Siano's default usb ids. This allows the support for Siano's USB IDs to be disabled, so that Siano's external driver can be used, instead. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
V4L/DVB (8305): sms1xxx: fix warning: format '%d' expects type 'int', but argument x has type 'size_t' Fix the following 64bit build warning: make[2]: Entering directory `/usr/src/linux-headers-2.6.24-16-generic' CC [M] smscoreapi.o smscoreapi.c: In function 'smscore_load_firmware_from_file': smscoreapi.c:604: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' CC [M] smsusb.o smsusb.c: In function 'smsusb1_load_firmware': smsusb.c:216: warning: format '%d' expects type 'int', but argument 3 has type 'size_t' smsusb.c:223: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' Signed-off-by:
-
Michael Krufky authored
set MODULE_DESCRIPTION to "Driver for the Siano SMS1XXX USB dongle" Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Add the capability to define device-specific firmware filenames for the SMS1150, with a mechanism to fall back to the generic firmware if the device-specific firmware is not present. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
All dmesg spam turned off by default, for now. Values for debug: (info=1, adv=2 (or-able) Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Set board ID in the usb_device_id table's driver_info field. Use board name when registering the dvb adapter. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Michael Krufky authored
fix the following checkpatch.pl warning: WARNING: unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html 596: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:540: + msg = (struct SmsMsgHdr_ST *) kmalloc(PAGE_SIZE, GFP_KERNEL | GFP_DMA); Signed-off-by:
-
