- 06 Dec, 2016 15 commits
-
-
Pablo Neira Ayuso authored
Register a new percpu counter stateful object type into the stateful object infrastructure. Signed-off-by:Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This patch augments nf_tables to support stateful objects. This new infrastructure allows you to create, dump and delete stateful objects, that are identified by a user-defined name. This patch adds the generic infrastructure, follow up patches add support for two stateful objects: counters and quotas. This patch provides a native infrastructure for nf_tables to replace nfacct, the extended accounting infrastructure for iptables. Signed-off-by: -
Florian Westphal authored
... so we can use current skb instead of working with a clone. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Florian Westphal authored
The caller assumes that < 0 means that skb was stolen (or free'd). All other return values continue skb processing. nf_hook_slow returns 3 different return value types: A) a (negative) errno value: the skb was dropped (NF_DROP, e.g. by iptables '-j DROP' rule). B) 0. The skb was stolen by the hook or queued to userspace. C) 1. all hooks returned NF_ACCEPT so the caller should invoke the okfn so packet processing can continue. nft ingress facility currently doesn't have the 'okfn' that the NF_HOOK() macros use; there is no nfqueue support either. So 1 means that nf_hook_ingress() caller should go on processing the skb. In order to allow use of NF_STOLEN from ingress we need to translate this to an errno number, else we'd crash because we continue with already-free'd (or about to be free-d) skb. The errno value isn't checked, its just important that its less than 0, so return -1. Signed-off-by:
-
Gao Feng authored
I lost one test case in the last commit for xt_multiport. For example, the rule is "-m multiport --dports 22,80,443". When first port is unmatched and the second is matched, the curent codes could not return the right result. It would return false directly when the first port is unmatched. Fixes: dd2602d0 ("netfilter: xt_multiport: Use switch case instead of multiple condition checks") Signed-off-by:
Gao Feng <fgao@ikuai8.com> Signed-off-by:
-
Pablo Neira Ayuso authored
This patch adds a new flag that signals the kernel to update layer 4 checksum if the packet field belongs to the layer 4 pseudoheader. This implicitly provides stateless NAT 1:1 that is useful under very specific usecases. Since rules mangling layer 3 fields that are part of the pseudoheader may potentially convey any layer 4 packet, we have to deal with the layer 4 checksum adjustment using protocol specific code. This patch adds support for TCP, UDP and ICMPv6, since they include the pseudoheader in the layer 4 checksum calculation. ICMP doesn't, so we can skip it. Signed-off-by: -
Liping Zhang authored
Otherwise, if fib lookup fail, *dest will be filled with garbage value, so reverse path filtering will not work properly: # nft add rule x prerouting fib saddr oif eq 0 drop Fixes: f6d0cbcf ("netfilter: nf_tables: add fib expression") Signed-off-by:
Liping Zhang <zlpnobody@gmail.com> Acked-by:
-
Liping Zhang authored
Acctually ntohl and htonl are identical, so this doesn't affect anything, but it is conceptually wrong. Signed-off-by:
-
Florian Westphal authored
instead of allocating each xt_counter individually, allocate 4k chunks and then use these for counter allocation requests. This should speed up rule evaluation by increasing data locality, also speeds up ruleset loading because we reduce calls to the percpu allocator. As Eric points out we can't use PAGE_SIZE, page_allocator would fail on arches with 64k page size. Suggested-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Florian Westphal authored
Keeps some noise away from a followup patch. Signed-off-by:
-
Florian Westphal authored
On SMP we overload the packet counter (unsigned long) to contain percpu offset. Hide this from callers and pass xt_counters address instead. Preparation patch to allocate the percpu counters in page-sized batch chunks. Signed-off-by:
-
Aaron Conole authored
This is to facilitate converting from a singly-linked list to an array of elements. Signed-off-by:
Aaron Conole <aconole@bytheb.org> Signed-off-by:
-
Aaron Conole authored
During nfhook traversal we only need a very small subset of nf_hook_ops members. We need: - next element - hook function to call - hook function priv argument Bridge netfilter also needs 'thresh'; can be obtained via ->orig_ops. nf_hook_entry struct is now 32 bytes on x86_64. A followup patch will turn the run-time list into an array that only stores hook functions plus their priv arguments, eliminating the ->next element. Suggested-by:
-
Aaron Conole authored
This allows easier future refactoring. Signed-off-by:
-
Florian Westphal authored
nf_defrag modules for ipv4 and ipv6 export an empty stub function. Any module that needs the defragmentation hooks registered simply 'calls' this empty function to create a phony module dependency -- modprobe will then load the defrag module too. This extends netfilter ipv4/ipv6 defragmentation modules to delay the hook registration until the functionality is requested within a network namespace instead of module load time for all namespaces. Hooks are only un-registered on module unload or when a namespace that used such defrag functionality exits. We have to use struct net for this as the register hooks can be called before netns initialization here from the ipv4/ipv6 conntrack module init path. There is no unregister functionality support, defrag will always be active once it was requested inside a net namespace. The reason is that defrag has impact on nft and iptables rulesets (without defrag we might see framents). Signed-off-by:
-
- 04 Dec, 2016 25 commits
-
-
Florian Westphal authored
This switch (default on) can be used to disable automatic registration of connection tracking functionality in newly created network namespaces. This means that when net namespace goes down (or the tracker protocol module is unloaded) we *might* have to unregister the hooks. We can either add another per-netns variable that tells if the hooks got registered by default, or, alternatively, just call the protocol _put() function and have the callee deal with a possible 'extra' put() operation that doesn't pair with a get() one. This uses the latter approach, i.e. a put() without a get has no effect. Conntrack is still enabled automatically regardless of the new sysctl setting if the new net namespace requires connection tracking, e.g. when NAT rules are created. Signed-off-by:
-
Florian Westphal authored
This makes use of nf_ct_netns_get/put added in previous patch. We add get/put functions to nf_conntrack_l3proto structure, ipv4 and ipv6 then implement use-count to track how many users (nft or xtables modules) have a dependency on ipv4 and/or ipv6 connection tracking functionality. When count reaches zero, the hooks are unregistered. This delays activation of connection tracking inside a namespace until stateful firewall rule or nat rule gets added. This patch breaks backwards compatibility in the sense that connection tracking won't be active anymore when the protocol tracker module is loaded. This breaks e.g. setups that ctnetlink for flow accounting and the like, without any '-m conntrack' packet filter rules. Followup patch restores old behavour and makes new delayed scheme optional via sysctl. Signed-off-by:
-
Florian Westphal authored
so that conntrack core will add the needed hooks in this namespace. Signed-off-by:
-
Florian Westphal authored
MASQUERADE, S/DNAT and REDIRECT already call functions that depend on the conntrack module. However, since the conntrack hooks are now registered in a lazy fashion (i.e., only when needed) a symbol reference is not enough. Thus, when something is added to a nat table, make sure that it will see packets by calling nf_ct_netns_get() which will register the conntrack hooks in the current netns. An alternative would be to add these dependencies to the NAT table. However, that has problems when using non-modular builds -- we might register e.g. ipv6 conntrack before its initcall has run, leading to NULL deref crashes since its per-netns storage has not yet been allocated. Adding the dependency in the modules instead has the advantage that nat table also does not register its hooks until rules are added. Signed-off-by:
-
Florian Westphal authored
currently aliased to try_module_get/_put. Will be changed in next patch when we add functions to make use of ->net argument to store usercount per l3proto tracker. This is needed to avoid registering the conntrack hooks in all netns and later only enable connection tracking in those that need conntrack. Signed-off-by:
-
Florian Westphal authored
since adf05168 ("netfilter: remove ip_conntrack* sysctl compat code") the only user (ipv4 tracker) sets this to an empty stub function. After this change nf_ct_l3proto_pernet_register() is also empty, but this will change in a followup patch to add conditional register of the hooks. Signed-off-by:
-
Davide Caratti authored
CONFIG_NF_CT_PROTO_UDPLITE is no more a tristate. When set to y, connection tracking support for UDPlite protocol is built-in into nf_conntrack.ko. footprint test: $ ls -l net/netfilter/nf_conntrack{_proto_udplite,}.ko \ net/ipv4/netfilter/nf_conntrack_ipv4.ko \ net/ipv6/netfilter/nf_conntrack_ipv6.ko (builtin)|| udplite| ipv4 | ipv6 |nf_conntrack ---------++--------+--------+--------+-------------- none || 432538 | 828755 | 828676 | 6141434 UDPlite || - | 829649 | 829362 | 6498204 Signed-off-by:Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Davide Caratti authored
CONFIG_NF_CT_PROTO_SCTP is no more a tristate. When set to y, connection tracking support for SCTP protocol is built-in into nf_conntrack.ko. footprint test: $ ls -l net/netfilter/nf_conntrack{_proto_sctp,}.ko \ net/ipv4/netfilter/nf_conntrack_ipv4.ko \ net/ipv6/netfilter/nf_conntrack_ipv6.ko (builtin)|| sctp | ipv4 | ipv6 | nf_conntrack ---------++--------+--------+--------+-------------- none || 498243 | 828755 | 828676 | 6141434 SCTP || - | 829254 | 829175 | 6547872 Signed-off-by: -
Davide Caratti authored
CONFIG_NF_CT_PROTO_DCCP is no more a tristate. When set to y, connection tracking support for DCCP protocol is built-in into nf_conntrack.ko. footprint test: $ ls -l net/netfilter/nf_conntrack{_proto_dccp,}.ko \ net/ipv4/netfilter/nf_conntrack_ipv4.ko \ net/ipv6/netfilter/nf_conntrack_ipv6.ko (builtin)|| dccp | ipv4 | ipv6 | nf_conntrack ---------++--------+--------+--------+-------------- none || 469140 | 828755 | 828676 | 6141434 DCCP || - | 830566 | 829935 | 6533526 Signed-off-by: -
Davide Caratti authored
To allow usage of enum ip_conntrack_dir in include/net/netns/conntrack.h, this patch encloses #include <linux/netfilter.h> in a #ifndef __KERNEL__ directive, so that compiler errors caused by unwanted inclusion of include/linux/netfilter.h are avoided. In addition, #include <linux/netfilter/nf_conntrack_common.h> line has been added to resolve correctly CTINFO2DIR macro. Signed-off-by:
Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-nextPablo Neira Ayuso authored
Simon Horman says: ==================== IPVS Updates for v4.10 please consider these enhancements to the IPVS for v4.10. * Decrement the IP ttl in all the modes in order to prevent infinite route loops. Thanks to Dwip Banerjee. * Use IS_ERR_OR_NULL macro. Clean-up from Gao Feng. ==================== Signed-off-by: -
Liping Zhang authored
So we can autoload nfnetlink_log.ko when the user adding nft log group X rule in netdev family. Signed-off-by:
-
Liping Zhang authored
In netdev family, we will handle non ethernet packets, so using eth_hdr(skb)->h_proto is incorrect. Meanwhile, we can use socket(AF_PACKET...) to sending packets, so skb->protocol is not always set in bridge family. Add an extra parameter into nf_log_l2packet to solve this issue. Fixes: 1fddf4ba ("netfilter: nf_log: add packet logging for netdev family") Signed-off-by:
-
Davide Caratti authored
CONFIG_NF_NAT_PROTO_UDPLITE is no more a tristate. When set to y, NAT support for UDPlite protocol is built-in into nf_nat.ko. footprint test: (nf_nat_proto_) |udplite || nf_nat --------------------------+--------++-------- no builtin | 408048 || 2241312 UDPLITE builtin | - || 2577256 Signed-off-by:
-
Davide Caratti authored
CONFIG_NF_NAT_PROTO_SCTP is no more a tristate. When set to y, NAT support for SCTP protocol is built-in into nf_nat.ko. footprint test: (nf_nat_proto_) | sctp || nf_nat --------------------------+--------++-------- no builtin | 428344 || 2241312 SCTP builtin | - || 2597032 Signed-off-by:
-
Davide Caratti authored
CONFIG_NF_NAT_PROTO_DCCP is no more a tristate. When set to y, NAT support for DCCP protocol is built-in into nf_nat.ko. footprint test: (nf_nat_proto_) | dccp || nf_nat --------------------------+--------++-------- no builtin | 409800 || 2241312 DCCP builtin | - || 2578968 Signed-off-by:
-
Arturo Borrero Gonzalez authored
The email address has changed, let's update the copyright statements. Signed-off-by:
Arturo Borrero Gonzalez <arturo@debian.org> Signed-off-by:
-
Erik Nordmark authored
Implemented RFC7527 Enhanced DAD. IPv6 duplicate address detection can fail if there is some temporary loopback of Ethernet frames. RFC7527 solves this by including a random nonce in the NS messages used for DAD, and if an NS is received with the same nonce it is assumed to be a looped back DAD probe and is ignored. RFC7527 is enabled by default. Can be disabled by setting both of conf/{all,interface}/enhanced_dad to zero. Signed-off-by:Erik Nordmark <nordmark@arista.com> Signed-off-by:
Bob Gilligan <gilligan@arista.com> Reviewed-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andrew Lunn says: ==================== mv88e6390 batch 3 More patches to support the MV88e6390. This is mostly refactoring existing code and adding implementations for the mv88e6390. This patchset set which reserved frames are sent to the cpu, the size of jumbo frames that will be accepted, turn off egress rate limiting, and configuration of pause frames. ==================== Signed-off-by: -
Andrew Lunn authored
The mv88e6390 has a number flow control registers accessed via the Flow Control register. Use these to set the pause control. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Andrew Lunn authored
The mv88e6390 has a different mechanism for configuring pause. Refactor the code into an ops function, and for the moment, don't add any mv88e6390 code yet. Signed-off-by:
-
Andrew Lunn authored
There are two different rate limiting configurations, depending on the switch generation. Refactor this into ops. Signed-off-by:
-
Andrew Lunn authored
Some switches support jumbo frames. Refactor this code into operations in the ops structure. Signed-off-by:
-
Andrew Lunn authored
Older devices have a couple of registers in global2. The mv88e6390 family has a single register in global1 behind which hides similar configuration. Implement and op for this. Signed-off-by:
-
David S. Miller authored
Andrew Lunn says: ==================== MV88E6390 batch two This is the second batch of patches adding support for the MV88e6390. They are not sufficient to make it work properly. The mv88e6390 has a much expanded set of priority maps. Refactor the existing code, and implement basic support for the new device. Similarly, the monitor control register has been reworked. The mv88e6390 has something odd in its EDSA tagging implementation, which means it is not possible to use it. So we need to use DSA tagging. This is the first device with EDSA support where we need to use DSA, and the code does not support this. So two patches refactor the existing code. The two different register definitions are separated out, and using DSA on an EDSA capable device is added. v2: Add port prefix Add helper function for 6390 Add _IEEE_ into #defines Split monitor_ctrl into a number of separate ops. Remove 6390 code which is management, used in a later patch s/EGREES/EGRESS/. Broke up setup_port_dsa() and set_port_dsa() into a number of ops v3: Verify mandatory ops for port setup Don't set ether type for DSA port. ==================== Signed-off-by:
-
