- 17 Mar, 2020 6 commits
-
-
Luca Coelho authored
These devices can be differentiated depending on the RF type and RF ID. Change them to use these instead of relying on the subsystem device IDs. This also fixes some names that were not including 160MHz (as they should). Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20200309091348.345de1efb3ec.Ib9221027a955188ea7c1ffca8a45bccd6c1e6a13@changeid
-
Luca Coelho authored
Pu, PnJ and Th devices have different combinations of PCI ID, MAC ID and RF IDs. Use these to differentiate them and choose the correct configuration. This also includes a change from using soc cfg's for 0x2526 devices (PnJ/Th), which was incorrect. Signed-off-by:
-
Luca Coelho authored
Devices that also include a GNSS module have different names, so add a new device option to differentiate them, according to the values we have in the modules section of the subsystem device ID. Additionally, convert the two applicable devices to use this value instead of hardcoded subsystem IDs. Signed-off-by:
-
Luca Coelho authored
Add MAC ID, RF ID and the bit that tells us whether the device can handle 160MHz bandwidth to the device struct. This allows us to chose the correct structure and string depending on these parameters. Do so for all the 0x2526 devices we already moved to the new table. Signed-off-by:
-
Luca Coelho authored
All the 0x2526 devices are now in the new table, so we can start reusing configurations and adding the strings independently to all of them, reusing them when possible. Signed-off-by:
-
Luca Coelho authored
Now that we have the strings separate from the rest, we can move the remaining 0x2526 devices to the new table in preparation to reuse the configs. Signed-off-by:
-
- 16 Mar, 2020 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for v5.7. Major changes: ath10k * support for getting btcoex settings from Device Tree * support QCA9377 SDIO device ath11k * add HE rate accounting * add thermal sensor and cooling devices
-
- 12 Mar, 2020 31 commits
-
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: b43-dev@lists.infradead.org Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: b43-dev@lists.infradead.org Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by:
-
Sergiu Cuciurean authored
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_usecs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd27 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by:
Sergiu Cuciurean <sergiu.cuciurean@analog.com> Signed-off-by:
-
Brian Norris authored
hard_header_len provides limitations for things like AF_PACKET, such that we don't allow transmitting packets smaller than this. needed_headroom provides a suggested minimum headroom for SKBs, so that we can trivally add our headers to the front. The latter is the correct field to use in this case, while the former mostly just prevents sending small AF_PACKET frames. In any case, mwifiex already does its own bounce buffering [1] if we don't have enough headroom, so hints (not hard limits) are all that are needed. This is the essentially the same bug (and fix) that brcmfmac had, fixed in commit cb39288f ("brcmfmac: use ndev->needed_headroom to reserve additional header space"). [1] mwifiex_hard_start_xmit(): if (skb_headroom(skb) < MWIFIEX_MIN_DATA_HEADER_LEN) { [...] /* Insufficient skb headroom - allocate a new skb */ Fixes: 5e6e3a92 ("wireless: mwifiex: initial commit for Marvell mwifiex driver") Signed-off-by:
Brian Norris <briannorris@chromium.org> Acked-by:
Ganapathi Bhat <ganapathi.gbhat@nxp.com> Signed-off-by:
-
Xu Wang authored
Remove unneeded variable ret used to store return value. Signed-off-by:
Xu Wang <vulab@iscas.ac.cn> Acked-by:
Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by:
-
chenqiwu authored
The simple_strtol() function is deprecated since it does not check for the range overflow. Use kstrtoint() instead. Signed-off-by:
chenqiwu <chenqiwu@xiaomi.com> Signed-off-by:
-
Kevin Lo authored
Remove unused fab_version member from struct rtw_hal. Some of the checks being made were nonsense. Signed-off-by:
Kevin Lo <kevlo@kevlo.org> Signed-off-by:
-
Dmitry Lebed authored
Firmware supports only STA as primary interface in repeater mode. Since the only meaningful usage of AP + STA interface combination is repeater, reject such combination with AP as primary interface. Signed-off-by:
Dmitry Lebed <dlebed@quantenna.com> Signed-off-by:
-
Sergey Matyukevich authored
Quantenna Pearl device exposes multiple (up to 3) radio interfaces under single PCIe function. So far all the wiphy devices were attached to the same pcie device. As a result, all different wireless network devices were reported under the same sysfs directory for pcie device, e.g.: $ ls /sys/class/net/wlan0/device/net/ wlan0 wlan1 It turns out that such behavior may confuse various users of wireless subsystem. For instance, it turned out to be the case for: - Linux init systems, e.g. for renaming based on parent device - OpenWRT configuration scripts Suggested solution is to add an intermediate virtual platform device for each radio interface. Signed-off-by:
Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by:
-
Sergey Matyukevich authored
Make sure that edmg field of cfg80211_chan_def structure is properly initialized by zeros. Otherwise cfg80211_chandef_valid may return false if edmg fields contain some garbage. Signed-off-by:
-
Sergey Matyukevich authored
Enable WPA3 OWE support in AP mode. Driver currently supports cards that offload OWE processing to userspace. This patch adds all the required tools for such offloading. Firmware requests OWE processing sending new UPDATE_OWE event to driver, which uses cfg80211_update_owe_info_event to notify userspace software. After OWE processing is completed, userspace sends calculated IEs to firmware using update_owe_info cfg80211 callback. Signed-off-by:
-
Sergey Matyukevich authored
Enable WPA3 SAE support in AP mode. Driver currently supports cards that offload SAE authentication to userspace. So allow userspace software to subscribe and to send AUTH frames. Besides, enable AP mode support in external_auth cfg80211 callback. Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: Jiri Slaby <jirislaby@gmail.com> Cc: Nick Kossifidis <mickflemm@gmail.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Cc: ath11k@lists.infradead.org Signed-off-by:
-
Yibo Zhao authored
Hardwares tested : QCA9887 Firmwares tested : 10.4-3.9.0.1-00036 Signed-off-by:
Yibo Zhao <yiboz@codeaurora.org> Signed-off-by:
-
Alex Elder authored
The definitions for the "qcom,smem-states" and "qcom,smem-state-names" properties need to list their "$ref" under an "allOf" keyword. In addition, fix two problems in the example at the end: - Use #include for header files that define needed symbolic values - Terminate the line that includes the "ipa-shared" register space name with a comma rather than a semicolon Finally, update some white space in the example for better alignment. Signed-off-by:Alex Elder <elder@linaro.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
the following packetdrill script socket(..., SOCK_STREAM, IPPROTO_MPTCP) = 3 fcntl(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress) > S 0:0(0) <mss 1460,sackOK,TS val 100 ecr 0,nop,wscale 8,mpcapable v1 flags[flag_h] nokey> < S. 0:0(0) ack 1 win 65535 <mss 1460,sackOK,TS val 700 ecr 100,nop,wscale 8,mpcapable v1 flags[flag_h] key[skey=2]> > . 1:1(0) ack 1 win 256 <nop, nop, TS val 100 ecr 700,mpcapable v1 flags[flag_h] key[ckey,skey]> getsockopt(3, SOL_SOCKET, SO_ERROR, [0], [4]) = 0 fcntl(3, F_SETFL, O_RDWR) = 0 write(3, ..., 1000) = 1000 doesn't transmit 1KB data packet after a successful three-way-handshake, using mp_capable with data as required by protocol v1, and write() hangs forever: PID: 973 TASK: ffff97dd399cae80 CPU: 1 COMMAND: "packetdrill" #0 [ffffa9b94062fb78] __schedule at ffffffff9c90a000 #1 [ffffa9b94062fc08] schedule at ffffffff9c90a4a0 #2 [ffffa9b94062fc18] schedule_timeout at ffffffff9c90e00d #3 [ffffa9b94062fc90] wait_woken at ffffffff9c120184 #4 [ffffa9b94062fcb0] sk_stream_wait_connect at ffffffff9c75b064 #5 [ffffa9b94062fd20] mptcp_sendmsg at ffffffff9c8e801c #6 [ffffa9b94062fdc0] sock_sendmsg at ffffffff9c747324 #7 [ffffa9b94062fdd8] sock_write_iter at ffffffff9c7473c7 #8 [ffffa9b94062fe48] new_sync_write at ffffffff9c302976 #9 [ffffa9b94062fed0] vfs_write at ffffffff9c305685 #10 [ffffa9b94062ff00] ksys_write at ffffffff9c305985 #11 [ffffa9b94062ff38] do_syscall_64 at ffffffff9c004475 #12 [ffffa9b94062ff50] entry_SYSCALL_64_after_hwframe at ffffffff9ca0008c RIP: 00007f959407eaf7 RSP: 00007ffe9e95a910 RFLAGS: 00000293 RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f959407eaf7 RDX: 00000000000003e8 RSI: 0000000001785fe0 RDI: 0000000000000008 RBP: 0000000001785fe0 R8: 0000000000000000 R9: 0000000000000003 R10: 0000000000000007 R11: 0000000000000293 R12: 00000000000003e8 R13: 00007ffe9e95ae30 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: 0000000000000001 CS: 0033 SS: 002b Fix it ensuring that socket state is TCP_ESTABLISHED on reception of the third ack. Fixes: 1954b860 ("mptcp: Check connection state before attempting send") Suggested-by:Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Chen Zhou authored
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/ibm/emac/core.c: In function __emac_mdio_write: drivers/net/ethernet/ibm/emac/core.c:875:9: warning: variable err set but not used [-Wunused-but-set-variable] Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chen Zhou <chenzhou10@huawei.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports a warning at netlink_seq_start() warning: context imbalance in netlink_seq_start() - wrong count at exit The root cause is the missing annotation at netlink_seq_start() Add the missing __acquires(RCU) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports warning at tcp_child_process() warning: context imbalance in tcp_child_process() - unexpected unlock The root cause is the missing annotation at tcp_child_process() Add the missing __releases(&((child)->sk_lock.slock)) annotation Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Jules Irenge authored
Sparse reports warnings at raw_seq_start() and raw_seq_stop() warning: context imbalance in raw_seq_start() - wrong count at exit warning: context imbalance in raw_seq_stop() - unexpected unlock The root cause is the missing annotations at raw_seq_start() and raw_seq_stop() Add the missing __acquires(&h->lock) annotation Add the missing __releases(&h->lock) annotation Signed-off-by:
-
Julian Wiedmann authored
In their .attach callback, mq[prio] only add the qdiscs of the currently active TX queues to the device's qdisc hash list. If a user later increases the number of active TX queues, their qdiscs are not visible via eg. 'tc qdisc show'. Add a hook to netif_set_real_num_tx_queues() that walks all active TX queues and adds those which are missing to the hash list. CC: Eric Dumazet <edumazet@google.com> CC: Jamal Hadi Salim <jhs@mojatatu.com> CC: Cong Wang <xiyou.wangcong@gmail.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Pavel Machek authored
No need to play with gotos to jump over single statement. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Jose Abreu authored
Since commit 319a1d19, stmmac only support basic HW stats type for action. Set this field in the L3/L4 Filtering test so that it correctly setups the filter instead of returning EOPNOTSUPP. Fixes: 319a1d19 ("flow_offload: check for basic action hw stats type") Signed-off-by:
Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Alexander Bersenev authored
The NCM specification defines two formats of transfer blocks: with 16-bit fields (NTB-16) and with 32-bit fields (NTB-32). Currently only NTB-16 is implemented. This patch adds the support of NTB-32. The motivation behind this is that some devices such as E5785 or E5885 from the current generation of Huawei LTE routers do not support NTB-16. The previous generations of Huawei devices are also use NTB-32 by default. Also this patch enables NTB-32 by default for Huawei devices. During the 2019 ValdikSS made five attempts to contact Huawei to add the NTB-16 support to their router firmware, but they were unsuccessful. Signed-off-by:
Alexander Bersenev <bay@hackerdom.ru> Signed-off-by:
-
Martin Varghese authored
Reverted commit "2baecda3 bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()" An explicit call to udp_encap_enable is needed as the setup_udp_tunnel_sock does not call udp_encap_enable if the if the socket is of type v6. Bareudp device uses v6 socket to receive v4 & v6 traffic CC: Taehee Yoo <ap420073@gmail.com> Fixes: 2baecda3 ("bareudp: remove unnecessary udp_encap_enable() in bareudp_socket_create()") Signed-off-by:
Martin Varghese <martin.varghese@nokia.com> Signed-off-by:
-
- 11 Mar, 2020 2 commits
-
-
tangbin authored
In this function, ftgmac100_probe() can be triggered only if the platform_device and platform_driver matches, so the judgement at the beginning is redundant. Signed-off-by:
tangbin <tangbin@cmss.chinamobile.com> Signed-off-by:
-
Remi Pommarel authored
When TPC is disabled IEEE80211_CONF_CHANGE_POWER event can be handled to reconfigure HW's maximum txpower. This fixes 0dBm txpower setting when user attaches to an interface for the first time with the following scenario: ieee80211_do_open() ath9k_add_interface() ath9k_set_txpower() /* Set TX power with not yet initialized sc->hw->conf.power_level */ ieee80211_hw_config() /* Iniatilize sc->hw->conf.power_level and raise IEEE80211_CONF_CHANGE_POWER */ ath9k_config() /* IEEE80211_CONF_CHANGE_POWER is ignored */ This issue can be reproduced with the following: $ modprobe -r ath9k $ modprobe ath9k $ wpa_supplicant -i wlan0 -c /tmp/wpa.conf & $ iw dev /* Here TX power is either 0 or 3 depending on RF chain */ $ killall wpa_supplicant $ iw dev /* TX power goes back to calibrated value and subsequent calls will be fine */ Fixes: 283dd119 ("ath9k: add per-vif TX power capability") Cc: stable@vger.kernel.org Signed-off-by:Remi Pommarel <repk@triplefau.lt> Signed-off-by:
-
