Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>

When CONFIG_CIFS_STATS2 is enabled keep counters for slow
commands (ie server took longer than 1 second to respond)
by SMB2/SMB3 command code.  This can help in diagnosing
whether performance problems are on server (instead of
client) and which commands are causing the problem.

Sample output (the new lines contain words "slow responses ...")

$ cat /proc/fs/cifs/Stats
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Total Large 10 Small 490 Allocations
Operations (MIDs): 0

0 session 0 share reconnects
Total vfs operations: 67 maximum at one time: 2
4 slow responses from localhost for command 5
1 slow responses from localhost for command 6
1 slow responses from localhost for command 14
1 slow responses from localhost for command 16

1) \\localhost\test
SMBs: 243
Bytes read: 1024000  Bytes written: 104857600
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 40 total 0 failed
Closes: 39 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

server->secmech.sdeschmacsha256 is not properly initialized before
smb2_shash_allocate(), set shash after that call.

also fix typo in error message

Fixes: 8de8c460 ("cifs: Fix validation of signed data in smb2")
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.com>
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>

An earlier commit had a typo which prevented the
optimization from working:

commit 18dd8e1a ("Do not send SMB3 SET_INFO request if nothing is changing")

Thank you to Metze for noticing this.  Also clear a
reserved field in the FILE_BASIC_INFO struct we send
that should be zero (all the other fields in that
struct were set or cleared explicitly already in
cifs_set_file_info).
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org> # 4.9.x+
Reported-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

CONFIG_CIFS_STATS is now always enabled (to simplify the
code and since the STATS are important for some common
customer use cases and also debugging), but needed one
minor change so that STATS shows as enabled in the debug
output in /proc/fs/cifs/DebugData, otherwise it could
get confusing with STATS no longer showing up in the
"Features" list in /proc/fs/cifs/DebugData when basic
stats were in fact available.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

If responses take longer than one second from the server,
we can optionally log them to dmesg in current cifs.ko code
(CONFIG_CIFS_STATS2 must be configured and a
/proc/fs/cifs/cifsFYI flag must be set), but can be more useful
to log these via ftrace (tracepoint is smb3_slow_rsp) which
is easier and more granular (still requires CONFIG_CIFS_STATS2
to be configured in the build though).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

These are used for SMB3 encryption and compounded requests.
Update these functions and the other functions related to SMB3 encryption to
take an array of requests.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

echo 0 > /proc/fs/cifs/Stats is supposed to reset the stats
but there were four (see example below) that were not reset
(bytes read and witten, total vfs ops and max ops
at one time).

...
0 session 0 share reconnects
Total vfs operations: 100 maximum at one time: 2

1) \\localhost\test
SMBs: 0
Bytes read: 502092  Bytes written: 31457286
TreeConnects: 0 total 0 failed
TreeDisconnects: 0 total 0 failed
...

This patch fixes cifs_stats_proc_write to properly reset
those four.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

We were only displaying bytes_read and bytes_written in cifs
stats, fix smb3 stats to also display them.  Sample output
with this patch:

    cat /proc/fs/cifs/Stats:

CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0

0 session 0 share reconnects
Total vfs operations: 94 maximum at one time: 2

1) \\localhost\test
SMBs: 214
Bytes read: 502092  Bytes written: 31457286
TreeConnects: 1 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 52 total 3 failed
Closes: 48 total 0 failed
Flushes: 0 total 0 failed
Reads: 17 total 0 failed
Writes: 31 total 0 failed
...
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

CONFIG_CIFS_STATS should always be enabled as Pavel recently
noted.  Simple statistics are not a significant performance hit,
and removing the ifdef simplifies the code slightly.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Cc: <stable@vger.kernel.org>

Add tracepoints for reconnecting an smb3 session

Example output (from trace-cmd) with the patch
(showing the session marked for reconnect, the stat failing, and then
the subsequent SMB3 commands after the server comes back up).
The "smb3_reconnect" event is the new one.

           cifsd-25993 [000] .... 29635.368265: smb3_reconnect: server=localhost current_mid=0x1e
            stat-26200 [001] .... 29638.516403: smb3_enter: 	cifs_revalidate_dentry_attr: xid=22
            stat-26200 [001] .... 29648.723296: smb3_exit_err: 	cifs_revalidate_dentry_attr: xid=22 rc=-112
     kworker/0:1-22830 [000] .... 29653.850947: smb3_cmd_done: 	sid=0x0 tid=0x0 cmd=0 mid=0
     kworker/0:1-22830 [000] .... 29653.851191: smb3_cmd_err: 	sid=0x8ae4683c tid=0x0 cmd=1 mid=1 status=0xc0000016 rc=-5
     kworker/0:1-22830 [000] .... 29653.855254: smb3_cmd_done: 	sid=0x8ae4683c tid=0x0 cmd=1 mid=2
     kworker/0:1-22830 [000] .... 29653.855482: smb3_cmd_done: 	sid=0x8ae4683c tid=0x8084f30d cmd=3 mid=3
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

In debugging reconnection problems, want to be able to more easily
trace cases in which the server has marked the SMB3 session
expired or deleted (to distinguish from timeout cases).
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

These timers were a good idea but weren't used in current code,
and the idea was cifs specific.  Future patch will add similar timers
for SMB2/SMB3, but no sense using memory for cifs timers that
aren't used in current code.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

Fixes problem pointed out by Pavel in discussions about commit
729c0c9dSigned-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org> # 3.18.x+

Remove counters from the per-tree connection /proc/fs/cifs/Stats
output that will always be zero (since they are not per-tcon ops)
ie SMB3 Negotiate, SessionSetup, Logoff, Echo, Cancel.

Also clarify "sent" to be "total" per-Pavel's suggestion
(since this "total" includes total for all operations that we try to
send whether or not succesffully sent). Sample output below:

Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0

1 session 2 share reconnects
Total vfs operations: 23 maximum at one time: 2

1) \\localhost\test
SMBs: 45
TreeConnects: 2 total 0 failed
TreeDisconnects: 0 total 0 failed
Creates: 13 total 2 failed
Closes: 9 total 0 failed
Flushes: 0 total 0 failed
Reads: 0 total 0 failed
Writes: 1 total 0 failed
Locks: 0 total 0 failed
IOCTLs: 3 total 1 failed
QueryDirectories: 4 total 2 failed
ChangeNotifies: 0 total 0 failed
QueryInfos: 10 total 0 failed
SetInfos: 3 total 0 failed
OplockBreaks: 0 sent 0 failed
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

For SMB2/SMB3 the number of requests sent was not displayed
in /proc/fs/cifs/Stats unless CONFIG_CIFS_STATS2 was
enabled (only number of failed requests displayed). As
with earlier dialects, we should be displaying these
counters if CONFIG_CIFS_STATS is enabled. They
are important for debugging.

e.g. when you cat /proc/fs/cifs/Stats (before the patch)
Resources in use
CIFS Session: 1
Share (unique mount targets): 2
SMB Request/Response Buffer: 1 Pool size: 5
SMB Small Req/Resp Buffer: 1 Pool size: 30
Operations (MIDs): 0

0 session 0 share reconnects
Total vfs operations: 690 maximum at one time: 2

1) \\localhost\test
SMBs: 975
Negotiates: 0 sent 0 failed
SessionSetups: 0 sent 0 failed
Logoffs: 0 sent 0 failed
TreeConnects: 0 sent 0 failed
TreeDisconnects: 0 sent 0 failed
Creates: 0 sent 2 failed
Closes: 0 sent 0 failed
Flushes: 0 sent 0 failed
Reads: 0 sent 0 failed
Writes: 0 sent 0 failed
Locks: 0 sent 0 failed
IOCTLs: 0 sent 1 failed
Cancels: 0 sent 0 failed
Echos: 0 sent 0 failed
QueryDirectories: 0 sent 63 failed
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>

snapshot mounts were not marked as read-only and did not display the snapshot
time (in /proc/mounts) specified on mount

With this patch - note that can not write to the snapshot mount (see "ro" in
/proc/mounts line) and also the missing snapshot timewarp token time is
dumped.  Sample line from /proc/mounts with the patch:

//127.0.0.1/scratch /mnt2 smb3 ro,relatime,vers=default,cache=strict,username=testuser,domain=,uid=0,noforceuid,gid=0,noforcegid,addr=127.0.0.1,file_mode=0755,dir_mode=0755,soft,nounix,serverino,mapposix,noperm,rsize=1048576,wsize=1048576,echo_interval=60,snapshot=1234567,actimeo=1 0 0
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>

Some servers, like Samba, don't support the fsctl for
query_network_interface_info so don't log a noisy warning
message on mount for this by default unless the error is more serious.
Lower the error to an FYI level so it does not get logged by
default.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

We really, really want to be encouraging use of secure dialects,
and SMB3.1.1 offers useful security features, and will soon
be the recommended dialect for many use cases. Simplify the code
by removing the CONFIG_CIFS_SMB311 ifdef so users don't disable
it in the build, and create compatibility and/or security issues
with modern servers - many of which have been supporting this
dialect for multiple years.

Also clarify some of the Kconfig text for cifs.ko about
SMB3.1.1 and current supported features in the module.
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

/proc/fs/cifs/DebugData displays the features (Kconfig options)
used to build cifs.ko but it was missing some, and needed comma
separator.  These can be useful in debugging certain problems
so we know which optional features were enabled in the user's build.
Also clarify them, by making them more closely match the
corresponding CONFIG_CIFS_* parm.

Old format:
Features: dfs fscache posix spnego xattr acl

New format:
Features: DFS,FSCACHE,SMB_DIRECT,STATS,DEBUG2,ALLOW_INSECURE_LEGACY,CIFS_POSIX,UPCALL(SPNEGO),XATTR,ACL
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>

Following up on a suggestion by Matthew Wilcox ...

The cifs CHANGES documentation file is out of date, and more
current information is in the wiki.  Delete the old version
information that is of little use to make this documentation
file more readable.

CC: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Output now matches expected stat -f output for all fields
except for Namelen and ID which were addressed in a companion
patch (which retrieves them from existing SMB3 mechanisms
and works whether POSIX enabled or not)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Fil in the correct namelen (typically 255 not 4096) in the
statfs response and also fill in a reasonably unique fsid
(in this case taken from the volume id, and the creation time
of the volume).

In the case of the POSIX statfs all fields are now filled in,
and in the case of non-POSIX mounts, all fields are filled
in which can be.
Signed-off-by: Steve French <stfrench@gmail.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

Check if every data page is signed correctly in sigining helper.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

also fixes error code in smb311_posix_mkdir() (where
the error assignment needs to go before the goto)
a typo that Dan Carpenter and Paulo and Gustavo
pointed out.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

allow disabling cifs (SMB1 ie vers=1.0) and vers=2.0 in the
config for the build of cifs.ko if want to always prevent mounting
with these less secure dialects.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Jeremy Allison <jra@samba.org>

If user specifies "posix" on an SMB3.11 mount, then fail the mount
if server does not return the POSIX negotiate context indicating
support for posix.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>

In the fscache, we just need the timestamps as cookies to check for
changes, so we don't really care about the overflow, but it's better
to stop using the deprecated timespec so we don't have to go through
explicit conversion functions.

To avoid comparing uninitialized padding values that are copied
while assigning the timespec values, this rearranges the members of
cifs_fscache_inode_auxdata to avoid padding, and assigns them
individually.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

In cifs, the timestamps are stored in memory in the cifs_fattr structure,
which uses the deprecated 'timespec' structure. Now that the VFS code
has moved on to 'timespec64', the next step is to change over the fattr
as well.

This also makes 32-bit and 64-bit systems behave the same way, and
no longer overflow the 32-bit time_t in year 2038.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

This is not really a runtime issue but Smatch complains that:

    fs/cifs/smb2ops.c:1740 smb2_query_symlink()
    error: uninitialized symbol 'resp_buftype'.

The warning is right that it can be uninitialized...  Also "err_buf"
would be NULL at this point and we're not supposed to pass NULLs to
free_rsp_buf() or it might trigger some extra output if we turn on
debugging.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull GPIO fix from Linus Walleij:
 "This is a single fix affecting X86 ACPI, and as such pretty important.

  It is going to stable as well and have all the high-notch x86 platform
  developers agreeing on it"

* tag 'gpio-v4.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpiolib-acpi: make sure we trigger edge events at least once on boot

Pull x86 fix from Thomas Gleixner:
 "A single fix, which addresses boot failures on machines which do not
  report EBDA correctly, which can place the trampoline into reserved
  memory regions. Validating against E820 prevents that"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot/compressed/64: Validate trampoline placement against E820