- 30 Nov, 2018 1 commit
-
-
Boris Brezillon authored
LBM is not needed when vertical scaling is disabled. Return 0 in this case to avoid allocating LBM memory that will anyway be unused. While at it, drop the test on ->is_unity which is now redundant. Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181130090254.594-1-boris.brezillon@bootlin.com
-
- 29 Nov, 2018 13 commits
-
-
Sean Paul authored
We should also get the drivers using the helpers. Seems like a good intermediate TODO item. Changes in v2: - Add line about replacing drm_modest_lock_all() (Daniel) Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181129195838.222031-1-sean@poorly.run
-
Sean Paul authored
This patch adds a couple of helpers to remove the boilerplate involved in grabbing all of the modeset locks. I've also converted the obvious cases in drm core to use the helpers. The only remaining instance of drm_modeset_lock_all_ctx() is in drm_framebuffer. It's complicated by the state clear that occurs on deadlock. ATM, there's no way to inject code in the deadlock path with the helpers, so it's unfit for conversion. Changes in v2: - Relocate ret argument to the end of the list (Daniel) - Incorporate Daniel's doc suggestions (Daniel) Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
Sean Paul authored
drm_atomic_state_put doesn't require any locking, and this makes things easier for switching to modeset_lock_all helpers in a future patch Changes in v2: - Moved state->acquire_ctx clear to a separate patch (Daniel) Reviewed-by:
-
Sean Paul authored
Instead of always re-initializing the variables we need to clean up on out, move the re-initialization into the branch that goes back to retry label. This is a lateral move right now, but will allow us to pull out the modeset locking into common code. I kept this change separate to make things easier to review. Changes in v2: - None Reviewed-by:
-
Sean Paul authored
drm_atomic_helper_commit_duplicated_state() sets state->acquire_ctx to the context given in the argument and leaves it in state after it quits. The lifetime of state and context are not guaranteed to be the same, so we shouldn't leave that pointer hanging around. This patch resets the context to NULL to avoid any oopses. Changes in v2: - Added to the set Suggested-by:
-
Noralf Trønnes authored
The CMA helper is already using the drm_fb_helper_generic_probe part of the generic fbdev emulation. This patch makes full use of the generic fbdev emulation by using its drm_client callbacks. This means that drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are now handled by the emulation code. Additionally fbdev unregister happens automatically on drm_dev_unregister(). The drm_fbdev_generic_setup() call is put after drm_dev_register() in the driver. This is done to highlight the fact that fbdev emulation is an internal client that makes use of the driver, it is not part of the driver as such. If fbdev setup fails, an error is printed, but the driver succeeds probing. drm_fbdev_generic_setup() handles mode_config.num_connector being zero. In that case it retries fbdev setup on the next .output_poll_changed. Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-4-noralf@tronnes.org
-
Maarten Lankhorst authored
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work. Signed-off-by:Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Gerd Hoffmann authored
Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
Robert Foss <robert.foss@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20181128151021.29565-3-kraxel@redhat.com
-
Gerd Hoffmann authored
Since commit "9fdd90c0 drm/virtio: add virtio_gpu_alloc_fence()" fences are not allocated any more by virtio_gpu_fence_emit(). So there is no need to pass down a reference to the fence pointer, a plain pointer is enough now. Convert virtio_gpu_fence_emit() and callers. Signed-off-by:
-
Daniel Vetter authored
We need to handle allocation failures and bail out. While at it, tune the allocation failures down to debug level. syzbot injected an allocation failure and then hit this WARN_ON. Reported-by: syzbot+eb6e5365f23c02517dda@syzkaller.appspotmail.com Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Gustavo Padovan <gustavo.padovan@collabora.com> Reviewed-by:
-
Dave Airlie authored
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work. Signed-off-by:Dave Airlie <airlied@redhat.com>
-
git://anongit.freedesktop.org/drm/drm-miscDave Airlie authored
drm-misc-next for v4.21: Core Changes: - Merge drm_info.c into drm_debugfs.c - Complete the fake drm_crtc_commit's hw_done/flip_done sooner. - Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now. - Decrease stack use of drm_gem_prime_mmap. - Improve documentation for dumb callbacks. Driver Changes: - Add edid support to virtio. - Wait on implicit fence in meson and sun4i. - Add support for BGRX8888 to sun4i. - Preparation patches for sun4i driver to start supporting linear and tiled YUV formats. - Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings. - Drop custom dumb_map in vkms. - Small fixes and cleanups to v3d. Signed-off-by:
-
git://linuxtv.org/pinchartl/mediaDave Airlie authored
R-Car DU changes for v4.21: - R8A7744 and R8A77470 support - R8A77965 LVDS support - Miscellaneous fixes Signed-off-by:
-
- 28 Nov, 2018 2 commits
-
-
git://anongit.freedesktop.org/drm/drm-intelDave Airlie authored
Changes outside i915: - Connector property to limit max bpc (Radhakrishna) - Fix LPE audio runtime PM and deinit (Ville) - DP FEC prep work (Anusha) - Mark pinned shmemfs pages as unevictable (Kuo-Hsin) - Backmerge drm-next (Jani) Inside i915: - Revert OA UAPI change that lacks userspace (Joonas) - Register macro cleanup (Jani) - 32-bit build fixes on pin flags (Chris) - Fix MG DP mode and PHY gating for HDMI (Imre) - DP MST race, hpd and irq fixes (Lyude) - Combo PHY fixes and cleanup (Imre, Lucas) - Move display init and cleanup under modeset init and cleanup (José) - PSR fixes (José) - Subslice size fixes (Daniele) - Abstract and clean up fixed point helpers (Jani) - Plane input CSC for YUV to RGB conversion (Uma) - Break long iterations for get/put shmemfs pages (Chris) - Improve DDI encoder hw state readout sanity checks (Imre) - Fix power well leaks for MST (José) - Scaler fixes (Ville) - Watermark fixes (Ville) - Fix VLV/CHV DSI panel orientation readout (Ville) - ICL rawclock fixes (Paulo) - Workaround DMC power well request issues (Imre) - Plane allocation fix (Maarten) - Transcoder enum value/ordering robustness fixes (Imre) - UTS_RELEASE build dependency fix (Hans Holmberg) Signed-off-by:
-
Yangtao Li authored
of_find_node_by_path() acquires a reference to the node returned by it and that reference needs to be dropped by its caller. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
- 27 Nov, 2018 24 commits
-
-
Eric Anholt authored
This is the same as the default drm_gem_dumb_map_offset() implementation, except that this one missed the ban on userspace mapping an imported dmabuf (which seems like intended common behavior for drivers). Signed-off-by:
-
Eric Anholt authored
The extra to_v3d_bo() calls came from copying this from the vc4 driver, which stored the cma gem object in the structs. v2: Fix an unused var warning Signed-off-by:
-
Eric Anholt authored
I merged bin and render's paths in a late refactoring. Signed-off-by:
-
Eric Anholt authored
Signed-off-by:
-
Neil Armstrong authored
This change is an attempt to handle the alternate clock for the CEA mode. 60Hz vs. 59.94Hz, 30Hz vs 29.97Hz or 24Hz vs 23.97Hz on the Amlogic Meson SoC DRM Driver pixel clock generation. The actual clock generation will be moved to the Common Clock framework once all the video clock are handled by the Amlogic Meson SoC clock driver, then these alternate timings will be handled in the same time in a cleaner fashion. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Reviewed-by:
Maxime Jourdan <mjourdan@baylibre.com> [narmstrong: fix maybe-uninitialized warnings after applying] Link: https://patchwork.freedesktop.org/patch/msgid/1541501675-3928-1-git-send-email-narmstrong@baylibre.com
-
Neil Armstrong authored
Add the timings for the HDMI 1.4 4K modes support : - 3840x2160@30 - 3840x2160@25 - 3840x2160@24 Since the 297000Hz pixel clock is already managed and the modes are compatible with the HDMI 1.4 current HDMI PHY+Controller support, only the missing timings values needs to be added. Signed-off-by:
-
Daniel Vetter authored
Noticed while reviewing a patch from Eric. Also add a todo for the dumb_map_offset callbacks (it should be simple to do, but piles of work). Plus fix up vbox, because vbox. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Nicholas Mc Guire <der.herr@hofr.at> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Fabio Rafael da Rosa <fdr@pid42.net> Reviewed-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
To prepare the introduction of tiled mode support, pass the framebuffer format modifier to the helpers dealing with format support. Since only linear mode is supported for now, add corresponding checks in each helper. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Paul Kocialkowski authored
This introduces support for the BGRX8888 output format for the frontend, with its associated output format value definition. Signed-off-by:
-
Paul Kocialkowski authored
Our hardware requires the pitch to be an even number when using YUV formats with the frontend. Implement a driver-specific callback for GEM dumb allocation that sets the pitch accordingly. Since only the bpp is passed (and not the format), we cannot really distinguish if this alignment is really required. Since it doesn't hurt to align the pitch anyway, always do it. Signed-off-by:
-
Paul Kocialkowski authored
The frontend comes with two "channels", that can be configured independently. When used in YUV mode, the first channel (CH0) represents the luminance component while the second channel (CH1) represents the chrominance. In RGB mode, both have to be configured the same way. Use variables (with the YUV terminology) for each channel's dimensions, calculating the chroma dimensions from the luma dimensions and the sub-sampling factors from the format description. Since the configured size only has pixel precision, the fractional fixed-point part of the source size is dropped for both components to ensure that the scaling factors are accurate. Signed-off-by:
-
Paul Kocialkowski authored
The values in the BT601 YUV to RGB colorspace translation are not simply coded as multiples, but rather as fixed-point signed fractional values on a given number of bits. Add an explanation about that. Signed-off-by:
Paul Kocialkowski <contact@paulk.fr> Signed-off-by:
-
Paul Kocialkowski authored
This introduces support for the BGRX8888 input format for the frontend, with its associated pixel sequence value definition. Other fields are already configured correctly as they no longer depend on the format's fourcc directly. Signed-off-by:
-
Paul Kocialkowski authored
Use the number of planes associated with the DRM format to determine the input mode configuration instead of the format iteself. This way, the helper can be used for all packed formats without future changes. Signed-off-by:
-
Paul Kocialkowski authored
This introduces proper definitions for the input and output format configuration registers instead of a macro and raw values in the code, with the intent to increase code readability and reduce indirections. Signed-off-by:
-
Paul Kocialkowski authored
This introduces new helpers for retrieving the input data mode and pixel sequence register field values based on the DRM format instead of hardcoding these. This makes it easier to add support for more formats. Signed-off-by:
-
Paul Kocialkowski authored
In order to support YUV to RGB conversion with the frontend (which is generally used for connecting with the backend), the CSC block must not be bypassed. As a result, the bit to enable CSC bypass is moved from the runtime resume routine to the format update routine, so that it can disabled when introducing support for YUV formats later. Signed-off-by:
-
Paul Kocialkowski authored
Since more formats can be supported by the frontend, rename the variable listing the layer formats to avoid suggesting that the backend itself supports all the listed formats. Signed-off-by:
-
Paul Kocialkowski authored
Our hardware has a limited number of YUV planes (usually 1) that can be supported using the backend only. However, YUV planes can also be supported by the frontend and must then not be counted when checking for that limitation. Only count the YUV plane when the frontend is not used. Signed-off-by:
-
Paul Kocialkowski authored
Before this patch, it is assumed that a plane is supported either through the frontend or through the backend alone. However, the DRM interface does not allow finely reporting our hardware capabilities and there are cases where neither are support. In particular, some plane formats are supported by the backend and not the frontend, so they can only be supported without scaling. Signed-off-by:
-
Paul Kocialkowski authored
Checking that scaling is in use is not sufficient as a condition to decide to use the frontend. Since not all layer formats are supported by the frontend, we need to check for that support first. Then, the frontend must only be enabled if the backend doesn't support the format or that scaling is required. Signed-off-by:
-
Paul Kocialkowski authored
In order to check whether the frontend supports a specific format, an explicit list and a related helper are introduced. Just like in the backend, the prototype of the helper is added to the frontend header so that it can be used later on. The helper is also exported because it will be used outside of the frontend module. Signed-off-by:
-
Paul Kocialkowski authored
In order to check whether the backend supports a specific format, an explicit list and a related helper are introduced. The prototype of this helper is added to the header so that it can be called from sun4i_layer later (when introducing tiled mode support). Signed-off-by:
-
Paul Kocialkowski authored
The backend allows integer-only scaling but can handle alpha components, unlike the frontend. It could be useful to add support for this eventually, so add a short TODO comment describing the situation. Signed-off-by:
-
