- 29 Apr, 2011 3 commits
-
-
Jarod Wilson authored
Signed-off-by:
Jarod Wilson <jarod@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Jarod Wilson authored
Signed-off-by:
-
Jarod Wilson authored
Add device ID for a Dell-branded, Philips device ID transceiver reported by an OpenELEC user on their forums. http://openelec.tv/forum/27-hardware-support/5622-adding-support-for-an-ir-receiver--dell-branded--#5622Signed-off-by:
-
- 19 Apr, 2011 18 commits
-
-
Marek Szyprowski authored
q->memory entry is initialized to late, so if allocation of memory buffers fails, the buffers might not be freed correctly (q->memory is tested in __vb2_free_mem, which can be called before setting q->memory). Reported-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> CC: Pawel Osciak <pawel@osciak.com> Signed-off-by:
-
Marek Szyprowski authored
Videobuf2 core assumes that driver doesn't set any buffer flags. This is correct for buffer state flags that videobuf2 manages, but the other flags like V4L2_BUF_FLAG_{KEY,P,B}FRAME, V4L2_BUF_FLAG_TIMECODE and V4L2_BUF_FLAG_INPUT should be passed from or to the driver. Reported-by:Jonghun Han <jonghun.han@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Add support for buffer timestamps and the sequence number in the video capture driver. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sylwester Nawrocki authored
Make sure the sizeimage for 3-planar color formats is width * height * 3/2 and the bytesperline is same for each plane in case of a multi-planar format. Signed-off-by:
-
Sylwester Nawrocki authored
Protecting the color format with vb2_is_streaming() is not sufficient as this prevents changing the format only after VIDIOC_STREAMON. To prevent the color format reconfiguration as soon as buffers are allocated use vb2_is_busy() instead. Also make the videobuf queue ops structure static. Signed-off-by:
-
Sylwester Nawrocki authored
Correct pixel limits for the fourth FIMC entity on Exynos4 SoCs. FIMC3 only supports the writeback input from the LCD mixer. Also rename s5pv310 variant to exynos4 which is needed after renaming s5pv310 series to Exynos4. Signed-off-by:
-
Michael Krufky authored
Cc: Stefan Sibiga <stefansibiga@yahoo.ca> Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
-
Michael Krufky authored
Cc: Stefan Sibiga <stefansibiga@yahoo.ca> Signed-off-by:
-
Michael Krufky authored
R_MPD bit 3 does not depend on analog vs. digital. Just use (0x7f & pd) directly from the values in the main pll table. Thanks to Stefan Sibiga for pointing this out. Cc: Stefan Sibiga <stefansibiga@yahoo.ca> Signed-off-by:
-
Michael Krufky authored
Fix type of prog_cal and prog_tab variables to avoid any possible calculation errors. Signed-off-by:
-
Michael Krufky authored
Misplaced parenthesis cause a calculation bug in tda18271_rf_tracking_filters_init Thanks to Stefan Sibiga for pointing this out. Cc: Stefan Sibiga <stefansibiga@yahoo.ca> Signed-off-by:
-
Laurent Pinchart authored
get_user_pages() can return a negative error code when it fails. Set buf->npages to 0 in that case, to prevent isp_video_buffer_cleanup() from releasing invalid pages. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Subdevs already have their own entity, don't register as second one when registering the subdev device node. Signed-off-by:
Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by:
-
Laurent Pinchart authored
When open a device node, all entities part of the same pipeline are powered on. If one of the entities fails to be powered on, the open operations fails. In that case the device node entity use count must not be incremented. Signed-off-by:
-
Michael Jones authored
To use the lane shifter, set different pixel formats at each end of the link at the CCDC input. Signed-off-by:
Michael Jones <michael.jones@matrix-vision.de> Acked-by:
-
Michael Jones authored
Add support for 8-bit bayer and 10- and 12-bit grey formats at the CCDC input. Y12 is truncated to Y10 at the CCDC output. Signed-off-by:
-
Michael Jones authored
8-bit SGBRG and SRGGB media bus formats are missing, as well as the 12-bit grey format. Add them. Signed-off-by:
-
Michael Jones authored
Y12 is a grey-scale format with a depth of 12 bits per pixel stored in 16-bit words. Signed-off-by:
-
- 17 Apr, 2011 8 commits
-
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Stanimir Varbanov authored
Use isp defines for isp xclk selection in isp_set_xclk(). Signed-off-by:
Stanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by:
-
Laurent Pinchart authored
When a failure to stop a module in the pipeline is detected, the only way to recover is to reset the ISP. However, as other users can be using a different pipeline with other modules, the ISP can't be reset synchronously with the error detection. Mark the ISP as needing a reset when a failure to stop a pipeline is detected, and reset the ISP when the last user releases the last reference to the ISP. Modify the omap3isp_pipeline_set_stream() function to record the new ISP pipeline state only when no error occurs, except when stopping the pipeline in which case the pipeline is still marked as stopped. Signed-off-by:
-
David Cohen authored
struct ispstat_generic_config's comments refers to isph3a_aewb_config, isph3a_af_config and isphist_config. But those structs have had their names prefixed with 'omap3'. So, let's update the comments. Signed-off-by:
David Cohen <david.cohen@nokia.com> Signed-off-by:
-
Laurent Pinchart authored
The link flags were not properly handled in __media_entity_setup_link which could lead to link_notify callback to be called when the flags are not modified. Fix this. Signed-off-by:
-
Michael Jones authored
It doesn't get more trivial than these. Signed-off-by:
-
Sakari Ailus authored
Round properly the rsz factor so that we get highest rsz so that the input width (or height) is highest possible smaller or equal to what the user asks. Signed-off-by:
-
Laurent Pinchart authored
As the number of phases/taps, used to select the correct equations to compute the ratio, depends on the ratio, start with the 7-tap mode equations to compute an approximation of the ratio, and switch to the 4-tap mode equations if the approximation is lower than or equal to 512. Signed-off-by:
-
- 13 Apr, 2011 11 commits
-
-
Laurent Pinchart authored
When the crop rectangle needs to be modified to match hardware requirements, center the resulting rectangle on the requested rectangle instead of removing pixels from the right and bottom sides only. Signed-off-by:
-
Laurent Pinchart authored
The documentation incorrectly refers to MEDIA_IOC_ENUM_LINKS, fix it. Signed-off-by:
-
Uwe Kleine-König authored
Since commit 379fa5d3 ([media] V4L: mx3_camera: convert to videobuf2) mx3_camera uses videobuf2, but that commit didn't upgrade the select resulting in the following build failure: drivers/built-in.o: In function `mx3_camera_init_videobuf': clkdev.c:(.text+0x86580): undefined reference to `vb2_dma_contig_memops' drivers/built-in.o: In function `mx3_camera_probe': clkdev.c:(.devinit.text+0x3548): undefined reference to `vb2_dma_contig_init_ctx' clkdev.c:(.devinit.text+0x3578): undefined reference to `vb2_dma_contig_cleanup_ctx' drivers/built-in.o: In function `mx3_camera_remove': clkdev.c:(.devexit.text+0x674): undefined reference to `vb2_dma_contig_cleanup_ctx' make[2]: *** [.tmp_vmlinux1] Error 1 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
Fix a couple of typos and clarify a formula in sh_mobile_ceu driver documentation. Signed-off-by:
-
Guennadi Liakhovetski authored
If the camera host driver (sh_mobile_ceu_camera.c) is unloaded and then reloaded, probe will fail, because camera client .set_bus_param() and .query_bus_param() methods have been set to NULL. Fix this by caching the original pointers and restoring them on driver-unbind. Signed-off-by:
-
Guennadi Liakhovetski authored
i2c_unregister_device() frees the I2C client, so, dereferencing it afterwards is a bug, that leads to Oopses. Signed-off-by:
-
Guennadi Liakhovetski authored
Signed-off-by:
-
Guennadi Liakhovetski authored
With the introduction of CSI2 support on sh-mobile, the host driver switched to using v4l2_device_call_until_err() with grp_id == 0 to call subdev operations on the sensor and the CSI2 subdev. However, this has broken multi-client set ups like the one on migor, because that way all operations get called on both clients. To fix this add a grp_id and set it to the client private context. Signed-off-by:
-
Guennadi Liakhovetski authored
v4l2_device_unregister_subdev() wrongly uses "arg..." instead of "## arg" in its body. Fix it. Signed-off-by:
-
Guennadi Liakhovetski authored
buf->size is not yet initialised in videobuf2-dma-contig at the time of the error message, use "size." Signed-off-by:
-
Guennadi Liakhovetski authored
The videobuf2-dma-contig allocator returns an ERR_PTR() on failure, not a NULL like all other allocators. Fix videobuf2-core to also correctly recognise those failures. Signed-off-by:
-
