- 19 Oct, 2011 3 commits
-
-
Jeff Kirsher authored
The cs89x0 driver was initial placed in the apple/ when it should have been placed in the cirrus/. This resolves the issue by moving the dirver and fixing up the respective Kconfig(s) and Makefile(s). Thanks to Sascha for reporting the issue. -v2 Fix a config error that was introduced with v1 by removing the dependency on MACE for NET_VENDOR_APPLE. CC: Russell Nelson <nelson@crynwr.com> CC: Andrew Morton <akpm@linux-foundation.org> Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
pppol2tp_xmit() calls skb_cow_head(skb, 2) before calling l2tp_xmit_skb() Then l2tp_xmit_skb() calls again skb_cow_head(skb, large_headroom) This patchs changes the first skb_cow_head() call to supply the needed headroom to make sure at most one (expensive) pskb_expand_head() is done. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Fragmented multicast frames are delivered to a single macvlan port, because ip defrag logic considers other samples are redundant. Implement a defrag step before trying to send the multicast frame. Reported-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 18 Oct, 2011 2 commits
-
-
Emil Tantilov authored
Use 32bit value starting at offset 0x2d for displaying the firmware version in ethtool. This should work for all current ixgbe HW Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
- 17 Oct, 2011 24 commits
-
-
Roy.Li authored
in6_dev_get(dev) takes a reference on struct inet6_dev, we dont need rcu locking in ndisc_constructor() Signed-off-by: Roy.Li <rongqing.li@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marc Kleine-Budde authored
The BerliOS project, which currently hosts our mailinglist, will close with the end of the year. Now take the chance and remove all occurrences of the mailinglist address from the source files. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marc Kleine-Budde authored
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
huajun li authored
While preparing net flow caches, once a fail may cause potential memory leak , fix it. Signed-off-by: Huajun Li <huajun.li.lee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The tcp_end field is not actually used by the hardware, so there is no need to set it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
Add GRO support to the ehea driver. v3: [cascardo] no need to enable GRO, since it's enabled by default [cascardo] vgrp was removed in the vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
In preparation for adding GRO to ehea, remove LRO. v3: [cascardo] fixed conflict with vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
Switch to using ndo_get_stats64 to get 64bit statistics. v3: [cascardo] use rtnl_link_stats64 as port stats Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The queue macros are many levels deep and it makes it harder to work your way through them when many of the versions are unused. Remove the unused versions. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
If a nonlinear skb fits within the immediate area, use skb_copy_bits instead of copying the frags by hand. v3: [cascardo] fixed conflict with use of skb frag API Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
write_swqe2_TSO and write_swqe2_nonTSO are almost identical. For TSO we have to set the TSO and mss bits in the wqe and we only put the header in the immediate area, no data. Collapse both functions into write_swqe2_immediate. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
Based on a patch from Michael Ellerman, clean up a significant portion of the transmit path. There was a lot of duplication here. Even worse, we were always checksumming tx packets and ignoring the skb->ip_summed field. Also remove NETIF_F_FRAGLIST from dev->features, I'm not sure why it was enabled. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The ehea adapter has a mode where it will avoid partial cacheline DMA writes on receive by always padding packets to fall on a cacheline boundary. Unfortunately we currently aren't allocating enough space for a full ethernet MTU packet to be rounded up, so this optimisation doesn't hit. It's unfortunate that the next largest packet size exposed by the hypervisor interface is 2kB, meaning our skb allocation comes out of a 4kB SLAB. However the performance increase due to this optimisation is quite large and my TCP stream numbers increase from 900MB to 1000MB/sec. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
We weren't enabling any VLAN features so we missed out on checksum offload and TSO when using VLANs. Enable them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
It seems like the ehea xmit routine and an ethtool change of TSO mode could race, resulting in corrupt packets. Checking gso_size is enough and we can use the helper function. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The num_tx_qps module option allows a user to configure a different number of tx and rx queues. Now the networking stack is multiqueue aware it makes little sense just to enable the tx queues and not the rx queues so remove the option. v3: [cascardo] fixed conflict with get_stats change Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
commit 18604c54 (ehea: NAPI multi queue TX/RX path for SMP) added driver specific logic for exiting napi mode. I'm not sure what it was trying to solve and it should be up to the network stack to decide when we are done polling so remove it. v3: [cascardo] Fixed extra parentheses. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
The ehea driver had some multiqueue support but was missing the last few years of networking stack improvements: - Use skb_record_rx_queue to record which queue an skb came in on. - Remove the driver specific netif_queue lock and use the networking stack transmit lock instead. - Remove the driver specific transmit queue hashing and use skb_get_queue_mapping instead. - Use netif_tx_{start|stop|wake}_queue where appropriate. We can also remove pr->queue_stopped and just check the queue status directly. - Print all 16 queues in the ethtool stats. We now enable multiqueue by default since it is a clear win on all my testing so far. v3: [cascardo] fixed use_mcs parameter description [cascardo] set ehea_ethtool_stats_keys as const Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Anton Blanchard authored
Remove the deprecated NETIF_F_LLTX feature. Since the network stack now provides the locking we can remove the driver specific pr->xmit_lock. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
-
Emil Tantilov authored
Implement support for ethtool -E Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Emil Tantilov authored
This patch makes sure that register writes are in little endian and also converts the reads back to big-endian. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Kvm and the Xen pci-back driver will set a flag in the virtual function pci device dev_flags when the VF is assigned to a guest VM. Before destroying subordinate VFs check to see if the flag is set and if so skip the call to pci_disable_sriov() to avoid system crashes. Copy the maintainer for the Xen pci-back driver. Also CC'ing maintainers of all drivers found to call pci_disable_sriov(). V2 - Fix uninitialized variable warning Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Christian Benvenuti <benve@cisco.com> Cc: Sathya Perla <sathya.perla@emulex.com> Cc: Dimitris Michailidis <dm@chelsio.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: James Smart <james.smart@emulex.com> Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Changes to clean up the VLAN Rx path by Jiri Pirko broke trunk VLAN. Trunk VLANs in a VF driver are those set using "ip link set <pfdev> vf <n> <vlanid>" Signed-off-by: Greg Rose <gregory.v.rose@intel.com> CC: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 16 Oct, 2011 5 commits
-
-
Michał Mirosław authored
Private rx_csum flags are now duplicate of netdev->features & NETIF_F_RXCSUM. Removing this needs deeper surgery. Things noticed: - HW VLAN acceleration probably can be toggled, but it's left as is - the resets on RX csum offload change can probably be avoided - there is A LOT of copy-and-pasted code here Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
When enabling hardware timestamping for ptp v2 event packets, the software does not setup the queue for l4 packets, although layer 4 packets are valid for v2. This patch adds the flag which enables setting up a queue and enabling udp packet timestamping. Signed-off-by: Jacob E Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Implements the new netdev op to allow user configuration of spoof checking on a per VF basis. V2 - Change netdev spoof check op setting to bool Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Greg Rose authored
Add configuration setting for drivers to turn spoof checking on or off for discrete VFs. v2 - Fix indentation problem, wrap the ifla_vf_info structure in #ifdef __KERNEL__ to prevent user space from accessing and change function paramater for the spoof check setting netdev op from u8 to bool. v3 - Preset spoof check setting to -1 so that user space tools such as ip can detect that the driver didn't report a spoofcheck setting. Prevents incorrect display of spoof check settings for drivers that don't report it. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
Commit 67fd4fcb (e1000e: convert to stats64) added the ability to update statistics more accurately and on-demand through the net_device_ops .ndo_get_stats64 hook, but introduced a locking bug on 82577/8/9 when linked at half-duplex (seen on kernels with CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_PROVE_LOCKING=y). The commit introduced code paths that caused a mutex to be locked in atomic contexts, e.g. an rcu_read_lock is held when irqbalance reads the stats from /sys/class/net/ethX/statistics causing the mutex to be locked to read the Phy half-duplex statistics registers. The mutex was originally introduced to prevent concurrent accesses of resources (the NVM and Phy) shared by the driver, firmware and hardware a few years back when there was an issue with the NVM getting corrupted. It was later split into two mutexes - one for the NVM and one for the Phy when it was determined the NVM, unlike the Phy, should not be protected by the software/firmware/hardware semaphore (arbitration of which is done in part with the SWFLAG bit in the EXTCNF_CTRL register). This latter semaphore should be sufficient to prevent resource contention of the Phy in the driver (i.e. the mutex for Phy accesses is not needed), but to be sure the mutex is replaced with an atomic bit flag which will warn if any contention is possible. Also add additional debug output to help determine when the sw/fw/hw semaphore is owned by the firmware or hardware. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
-
- 14 Oct, 2011 6 commits
-
-
Daniel Drake authored
The recent changes to only power the device when the interface up introduced a bug: changing interface type, legal when the interface is down, performs device I/O. Fix this functionality by validating and recording the interface type when the change is requested, but only applying the change if/when the interface is brought up. Signed-off-by: Daniel Drake <dsd@laptop.org> Acked-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Only station flags that are already defined in nl80211 are added for now. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Helmut Schaa authored
Reuse the already existing struct nl80211_sta_flag_update to specify both, a flag mask and the flag set itself. This means nl80211_sta_flag_update is now used for setting station flags and also for getting station flags. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
The queue mapping/TID for non-QoS null data responses to is never set, making it default to BK. Fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
Renamed to be in sync with Marketing term and to avoid confusion with other chip names. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-
Rajkumar Manoharan authored
The AR946/8x chips are 2x2 Dual band with BT support. In order to avoid misleading with other chips and to be in sync with marketing team's term, AR9480 is renamed as AR9462. Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
-