- 13 Dec, 2018 19 commits
-
-
Chaitanya Kulkarni authored
This patch adds the NVMe error slot definition from the spec. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Chaitanya Kulkarni authored
This is a preparation patch which removes the nvme common command cdw10 array and replace with individual fields. This is needed for the nvmet error log page implementation make is error log page entry offset assignment easier. Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Jens Axboe authored
When boxes are run near (or to) OOM, we have a problem with the discard page allocation in nvme. If we fail allocating the special page, we return busy, and it'll get retried. But since ordering is honored for dispatch requests, we can keep retrying this same IO and failing. Behind that IO could be requests that want to free memory, but they never get the chance. Allocate a fixed discard page per controller for a safe fallback, and use that if the initial allocation fails. Signed-off-by: Jens Axboe <axboe@kernel.dk> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Chengguang Xu authored
Add __exit annotation to cleanup helper which is only called once in the module. Signed-off-by: Chengguang Xu <cgxu519@gmx.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
This patch implements the NVMe over TCP host driver. It can be used to connect to remote NVMe over Fabrics subsystems over good old TCP/IP. The driver implements the TP 8000 of how nvme over fabrics capsules and data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte stream. nvme-tcp header and data digest are supported as well. To connect to all NVMe over Fabrics controllers reachable on a given taget port over TCP use the following command: nvme connect-all -t tcp -a $IPADDR This requires the latest version of nvme-cli with TCP support. Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Roy Shterman <roys@lightbitslabs.com> Signed-off-by: Solganik Alexander <sashas@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
This patch implements the TCP transport driver for the NVMe over Fabrics target stack. This allows exporting NVMe over Fabrics functionality over good old TCP/IP. The driver implements the TP 8000 of how nvme over fabrics capsules and data are encapsulated in nvme-tcp pdus and exchaged on top of a TCP byte stream. nvme-tcp header and data digest are supported as well. Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Roy Shterman <roys@lightbitslabs.com> Signed-off-by: Solganik Alexander <sashas@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
Data digest is a nvme-tcp specific feature, but nothing prevents other transports reusing the concept so do not associate with tcp transport solely. Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
Header digest is a nvme-tcp specific feature, but nothing prevents other transports reusing the concept so do not associate with tcp transport solely. Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
nvmet-tcp will implement it to allocate queue commands which are only known at nvmf connect time (sq size). Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
Introduce a helper to copy datagram into an iovec iterator but also update a predefined hash. This is useful for consumers of skb_copy_datagram_iter to also support inflight data digest without having to finish to copy and only then traverse the iovec and calculate the digest hash. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
Allow consumers that want to use iov iterator helpers and also update a predefined hash calculation online when copying data. This is useful when copying incoming network buffers to a local iterator and calculate a digest on the incoming stream. nvme-tcp host driver that will be introduced in following patches is the first consumer via skb_copy_and_hash_datagram_iter. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
skb_copy_datagram_iter and skb_copy_and_csum_datagram are essentialy the same but with a couple of differences: The first is the copy operation used which either a simple copy or a csum_and_copy, and the second are the behavior on the "short copy" path where simply copy needs to return the number of bytes successfully copied while csum_and_copy needs to fault immediately as the checksum is partial. Introduce __skb_datagram_iter that additionally accepts: 1. copy operation function pointer 2. private data that goes with the copy operation 3. fault_short flag to indicate the action on short copy Suggested-by: David S. Miller <davem@davemloft.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
The single caller to csum_and_copy_to_iter is skb_copy_and_csum_datagram and we are trying to unite its logic with skb_copy_datagram_iter by passing a callback to the copy function that we want to apply. Thus, we need to make the checksum pointer private to the function. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
This will be useful to consolidate skb_copy_and_hash_datagram_iter and skb_copy_and_csum_datagram to a single code path. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Sagi Grimberg authored
Prevent a namespace conflict as in following patches as skbuff.h will include the crypto API. Acked-by: David S. Miller <davem@davemloft.net> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sagi Grimberg <sagi@lightbitslabs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
-
Dennis Zhou authored
Between v3 [1] and v4 [2] of the blkg association series, the association point moved from generic_make_request_checks(), which is called after the request enters the queue, to bio_set_dev(), which is when the bio is formed before submit_bio(). When the request_queue goes away, the blkgs supporting the request_queue are destroyed and then the q->root_blkg is set to %NULL. This patch adds a %NULL check to blkg_tryget_closest() to prevent the NPE caused by the above. It also adds a guard to see if the request_queue is dying when creating a blkg to prevent creating a blkg for a dead request_queue. [1] https://lore.kernel.org/lkml/20180911184137.35897-1-dennisszhou@gmail.com/ [2] https://lore.kernel.org/lkml/20181126211946.77067-1-dennis@kernel.org/ Fixes: 5cdf2e3f ("blkcg: associate blkg when associating a device") Reported-and-tested-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Dennis Zhou <dennis@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 12 Dec, 2018 2 commits
-
-
Ming Lei authored
rwb_enabled() can't be changed when there is any inflight IO. wbt_disable_default() may set rwb->wb_normal as zero, however the blk_stat timer may still be pending, and the timer function will update wrb->wb_normal again. This patch introduces blk_stat_deactivate() and applies it in wbt_disable_default(), then the following IO hang triggered when running parted & switching io scheduler can be fixed: [ 369.937806] INFO: task parted:3645 blocked for more than 120 seconds. [ 369.938941] Not tainted 4.20.0-rc6-00284-g906c801e5248 #498 [ 369.939797] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 369.940768] parted D 0 3645 3239 0x00000000 [ 369.941500] Call Trace: [ 369.941874] ? __schedule+0x6d9/0x74c [ 369.942392] ? wbt_done+0x5e/0x5e [ 369.942864] ? wbt_cleanup_cb+0x16/0x16 [ 369.943404] ? wbt_done+0x5e/0x5e [ 369.943874] schedule+0x67/0x78 [ 369.944298] io_schedule+0x12/0x33 [ 369.944771] rq_qos_wait+0xb5/0x119 [ 369.945193] ? karma_partition+0x1c2/0x1c2 [ 369.945691] ? wbt_cleanup_cb+0x16/0x16 [ 369.946151] wbt_wait+0x85/0xb6 [ 369.946540] __rq_qos_throttle+0x23/0x2f [ 369.947014] blk_mq_make_request+0xe6/0x40a [ 369.947518] generic_make_request+0x192/0x2fe [ 369.948042] ? submit_bio+0x103/0x11f [ 369.948486] ? __radix_tree_lookup+0x35/0xb5 [ 369.949011] submit_bio+0x103/0x11f [ 369.949436] ? blkg_lookup_slowpath+0x25/0x44 [ 369.949962] submit_bio_wait+0x53/0x7f [ 369.950469] blkdev_issue_flush+0x8a/0xae [ 369.951032] blkdev_fsync+0x2f/0x3a [ 369.951502] do_fsync+0x2e/0x47 [ 369.951887] __x64_sys_fsync+0x10/0x13 [ 369.952374] do_syscall_64+0x89/0x149 [ 369.952819] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 369.953492] RIP: 0033:0x7f95a1e729d4 [ 369.953996] Code: Bad RIP value. [ 369.954456] RSP: 002b:00007ffdb570dd48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a [ 369.955506] RAX: ffffffffffffffda RBX: 000055c2139c6be0 RCX: 00007f95a1e729d4 [ 369.956389] RDX: 0000000000000001 RSI: 0000000000001261 RDI: 0000000000000004 [ 369.957325] RBP: 0000000000000002 R08: 0000000000000000 R09: 000055c2139c6ce0 [ 369.958199] R10: 0000000000000000 R11: 0000000000000246 R12: 000055c2139c0380 [ 369.959143] R13: 0000000000000004 R14: 0000000000000100 R15: 0000000000000008 Cc: stable@vger.kernel.org Cc: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
We're missing a deferred clear off the shallow get, which can cause a hang. Additionally, when we resize the sbitmap, we should also flush deferred clears for good measure. Ensure we have full coverage on batch clears, even for paths where we would not be doing deferred clear. This makes it less error prone for future additions. Reported-by: Bart Van Assche <bvanassche@acm.org> Tested-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
- 11 Dec, 2018 19 commits
-
-
Igor Konopko authored
Ehen using pblk with 0 sized metadata both ppa list and meta list points to the same memory since pblk_dma_meta_size() returns 0 in that case. This patch fix that issue by ensuring that pblk_dma_meta_size() always returns space equal to sizeof(struct pblk_sec_meta) and thus ppa list and meta list points to different memory address. Even that in that case drive does not really care about meta_list pointer, this is the easiest way to fix that issue without introducing changes in many places in the code just for 0 sized metadata case. The same approach needs to be also done for pblk_get_sec_meta() since we also cannot point to the same memory address in meta buffer when we are using it for pblk recovery process Reported-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Tested-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Igor Konopko authored
pblk performs recovery of open lines by storing the LBA in the per LBA metadata field. Recovery therefore only works for drives that has this field. This patch adds support for packed metadata, which store l2p mapping for open lines in last sector of every write unit and enables drives without per IO metadata to recover open lines. After this patch, drives with OOB size <16B will use packed metadata and metadata size larger than16B will continue to use the device per IO metadata. Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Igor Konopko authored
Currently pblk only check the size of I/O metadata and does not take into account if this metadata is in a separate buffer or interleaved in a single metadata buffer. In reality only the first scenario is supported, where second mode will break pblk functionality during any IO operation. This patch prevents pblk to be instantiated in case device only supports interleaved metadata. Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Igor Konopko authored
Currently lightnvm and pblk uses single DMA pool, for which the entry size always is equal to PAGE_SIZE. The contents of each entry allocated from the DMA pool consists of a PPA list (8bytes * 64), leaving 56bytes * 64 space for metadata. Since the metadata field can be bigger, such as 128 bytes, the static size does not cover this use-case. This patch adds support for I/O metadata above 56 bytes by changing DMA pool size based on device meta size and allows pblk to use OOB metadata >=16B. Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Igor Konopko authored
pblk currently assumes that size of OOB metadata on drive is always equal to size of pblk_sec_meta struct. This commit add helpers which will allow to handle different sizes of OOB metadata on drive in the future. After this patch only OOB metadata equal to 16 bytes is supported. Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Igor Konopko authored
Currently DMA allocated memory is reused on partial read for lba_list_mem and lba_list_media arrays. In preparation for dynamic DMA pool sizes we need to move this arrays into pblk_pr_ctx structures. Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Igor Konopko <igor.j.konopko@intel.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Javier González authored
The current kref implementation around pblk global caches triggers a false positive on refcount_inc_checked() (when called) as the kref is initialized to 0. Instead of usint kref_inc() on a 0 reference, which is in principle correct, use kref_init() to avoid the check. This is also more explicit about what actually happens on cache creation. In the process, do a small refactoring to use kref helpers. Fixes: 1864de94 "lightnvm: pblk: stop recreating global caches" Signed-off-by: Javier González <javier@cnexlabs.com> Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Matias Bjørling authored
Currently the geometry of an OCSSD is enumerated using a two step approach: First, nvm_register is called, the OCSSD identify command is issued, and second the geometry sos and csecs values are read either from the OCSSD identify if it is a 1.2 drive, or from the NVMe namespace data structure if it is a 2.0 device. This patch recombines it into a single step, such that nvm_register can use the csecs and sos fields independent of which version is used. This enables one to dynamically size the lightnvm subsystem dma pool. Reviewed-by: Igor Konopko <igor.j.konopko@intel.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Javier González authored
pblk's recovery path is single threaded and therefore a number of assumptions regarding concurrency can be made. To avoid confusion, make this explicit with a couple of comments in the code. Signed-off-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hua Su authored
Protect the list_add on the pblk_line_init_bb() error path in case this code is used for some other purpose in the future. Signed-off-by: Hua Su <suhua.tanke@gmail.com> Reviewed-by: Javier González <javier@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hua Su authored
Signed-off-by: Hua Su <suhua.tanke@gmail.com> Updated description. Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
Remove the call to pblk_line_replace_data as it returns directly because we have not set l_mg->data_next yet. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
The chunk metadata is allocated with vmalloc, so we need to use vfree to free it. Fixes: 090ee26f ("lightnvm: use internal allocation for chunk log page") Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
ADDR_POOL_SIZE is not used anymore, so remove the macro. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
In a worst-case scenario (random writes), OP% of sectors in each line will be invalid, and we will then need to move data out of 100/OP% lines to free a single line. So, to prevent the possibility of running out of lines, temporarily block user writes when there is less than 100/OP% free lines. Also ensure that pblk creation does not produce instances with insufficient over provisioning. Insufficient over-provising is not a problem on real hardware, but often an issue when running QEMU simulations (with few lines). 100 lines is enough to create a sane instance with the standard (11%) over provisioning. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
If mapping fails (i.e. when running out of lines), handle the error and stop writing. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
Lines inflicted with write errors lines might be recovered if they have not been recycled after write error garbage collection. Ensure that the emeta accounting of valid lbas is correct for such lines to avoid recovery inconsistencies. Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
Make sure we only look up valid lba addresses on the resubmission path. If an lba is invalidated in the write buffer, that sector will be submitted to disk (as it is already mapped to a ppa), and that write might fail, resulting in a crash when trying to look up the lba in the mapping table (as the lba is marked as invalid). Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Reviewed-by: Javier González <javier@javigon.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-
Hans Holmberg authored
The check for chunk closes suffers from an off-by-one issue, leading to chunk close events not being traced. Fixes: 4c44abf4 ("lightnvm: pblk: add trace events for chunk states") Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com> Signed-off-by: Matias Bjørling <mb@lightnvm.io> Signed-off-by: Jens Axboe <axboe@kernel.dk>
-