Function and callers can be preempted.

https://bugzilla.kernel.org/show_bug.cgi?id=73721Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>

Rename variable smep to cr4_smep, which can better reflect the
meaning of the variable.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

This patch exposes SMAP feature to guest
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

SMAP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMAP needs to be
manually disabled when guest switches to non-paging mode.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

This patch adds SMAP handling logic when setting CR4 for guests

Thanks a lot to Paolo Bonzini for his suggestion to use the branchless
way to detect SMAP violation.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

This patch removes SMAP bit from CR4_RESERVED_BITS.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

The RTC tracking code tracks the cardinality of rtc_status.dest_map
into rtc_status.pending_eoi.  It has some WARN_ONs that trigger if
pending_eoi ever becomes negative; however, these do not do anything
to recover, and it bad things will happen soon after they trigger.

When the next RTC interrupt is triggered, rtc_check_coalesced() will
return false, but ioapic_service will find pending_eoi != 0 and
do a BUG_ON.  To avoid this, should pending_eoi ever be nonzero,
call kvm_rtc_eoi_tracking_restore_all to recompute a correct
dest_map and pending_eoi.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

QE reported that they got the BUG_ON in ioapic_service to trigger.
I cannot reproduce it, but there are two reasons why this could happen.

The less likely but also easiest one, is when kvm_irq_delivery_to_apic
does not deliver to any APIC and returns -1.

Because irqe.shorthand == 0, the kvm_for_each_vcpu loop in that
function is never reached.  However, you can target the similar loop in
kvm_irq_delivery_to_apic_fast; just program a zero logical destination
address into the IOAPIC, or an out-of-range physical destination address.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull kvm updates from Paolo Bonzini:
 "PPC and ARM do not have much going on this time.  Most of the cool
  stuff, instead, is in s390 and (after a few releases) x86.

  ARM has some caching fixes and PPC has transactional memory support in
  guests.  MIPS has some fixes, with more probably coming in 3.16 as
  QEMU will soon get support for MIPS KVM.

  For x86 there are optimizations for debug registers, which trigger on
  some Windows games, and other important fixes for Windows guests.  We
  now expose to the guest Broadwell instruction set extensions and also
  Intel MPX.  There's also a fix/workaround for OS X guests, nested
  virtualization features (preemption timer), and a couple kvmclock
  refinements.

  For s390, the main news is asynchronous page faults, together with
  improvements to IRQs (floating irqs and adapter irqs) that speed up
  virtio devices"

* tag 'kvm-3.15-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (96 commits)
  KVM: PPC: Book3S HV: Save/restore host PMU registers that are new in POWER8
  KVM: PPC: Book3S HV: Fix decrementer timeouts with non-zero TB offset
  KVM: PPC: Book3S HV: Don't use kvm_memslots() in real mode
  KVM: PPC: Book3S HV: Return ENODEV error rather than EIO
  KVM: PPC: Book3S: Trim top 4 bits of physical address in RTAS code
  KVM: PPC: Book3S HV: Add get/set_one_reg for new TM state
  KVM: PPC: Book3S HV: Add transactional memory support
  KVM: Specify byte order for KVM_EXIT_MMIO
  KVM: vmx: fix MPX detection
  KVM: PPC: Book3S HV: Fix KVM hang with CONFIG_KVM_XICS=n
  KVM: PPC: Book3S: Introduce hypervisor call H_GET_TCE
  KVM: PPC: Book3S HV: Fix incorrect userspace exit on ioeventfd write
  KVM: s390: clear local interrupts at cpu initial reset
  KVM: s390: Fix possible memory leak in SIGP functions
  KVM: s390: fix calculation of idle_mask array size
  KVM: s390: randomize sca address
  KVM: ioapic: reinject pending interrupts on KVM_SET_IRQCHIP
  KVM: Bump KVM_MAX_IRQ_ROUTES for s390
  KVM: s390: irq routing for adapter interrupts.
  KVM: s390: adapter interrupt sources
  ...

Pull virtio updates from Rusty Russell:
 "Nothing exciting: virtio-blk users might see a bit of a boost from the
  doubling of the default queue length though"

* tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  virtio-blk: base queue-depth on virtqueue ringsize or module param
  Revert a02bbb1c: MAINTAINERS: add virtio-dev ML for virtio
  virtio: fail adding buffer on broken queues.
  virtio-rng: don't crash if virtqueue is broken.
  virtio_balloon: don't crash if virtqueue is broken.
  virtio_blk: don't crash, report error if virtqueue is broken.
  virtio_net: don't crash if virtqueue is broken.
  virtio_balloon: don't softlockup on huge balloon changes.
  virtio: Use pci_enable_msix_exact() instead of pci_enable_msix()
  MAINTAINERS: virtio-dev is subscribers only
  tools/virtio: add a missing )
  tools/virtio: fix missing kmemleak_ignore symbol
  tools/virtio: update internal copies of headers

Pull DMA-mapping updates from Marek Szyprowski:
 "This contains extension for more efficient handling of io address
  space for dma-mapping subsystem for ARM architecture"

* 'for-3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
  arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()
  arm: dma-mapping: Add support to extend DMA IOMMU mappings

Pull devicetree changes from Grant Likely:
 "Updates to devicetree core code.  This branch contains the following
  notable changes:

   - add reserved memory binding
   - make struct device_node a kobject and remove legacy
     /proc/device-tree
   - ePAPR conformance fixes
   - update in-kernel DTC copy to version v1.4.0
   - preparatory changes for dynamic device tree overlays
   - minor bug fixes and documentation changes

  The most significant change in this branch is the conversion of struct
  device_node to be a kobject that is exposed via sysfs and removal of
  the old /proc/device-tree code.  This simplifies the device tree
  handling code and tightens up the lifecycle on device tree nodes.

  [updated: added fix for dangling select PROC_DEVICETREE]"

* tag 'dt-for-linus' of git://git.secretlab.ca/git/linux: (29 commits)
  dt: Remove dangling "select PROC_DEVICETREE"
  of: Add support for ePAPR "stdout-path" property
  of: device_node kobject lifecycle fixes
  of: only scan for reserved mem when fdt present
  powerpc: add support for reserved memory defined by device tree
  arm64: add support for reserved memory defined by device tree
  of: add missing major vendors
  of: add vendor prefix for SMSC
  of: remove /proc/device-tree
  of/selftest: Add self tests for manipulation of properties
  of: Make device nodes kobjects so they show up in sysfs
  arm: add support for reserved memory defined by device tree
  drivers: of: add support for custom reserved memory drivers
  drivers: of: add initialization code for dynamic reserved memory
  drivers: of: add initialization code for static reserved memory
  of: document bindings for reserved-memory nodes
  Revert "of: fix of_update_property()"
  kbuild: dtbs_install: new make target
  ARM: mvebu: Allows to get the SoC ID even without PCI enabled
  of: Allows to use the PCI translator without the PCI core
  ...

Pull more ACPI and power management updates from Rafael Wysocki:
 "These are commits that were not quite ready when I sent the original
  pull request for 3.15-rc1 several days ago, but they have spent some
  time in linux-next since then and appear to be good to go.  All of
  them are fixes and cleanups.

  Specifics:

   - Remaining changes from upstream ACPICA release 20140214 that
     introduce code to automatically serialize the execution of methods
     creating any named objects which really cannot be executed in
     parallel with each other anyway (previously ACPICA attempted to
     address that by aborting methods upon conflict detection, but that
     wasn't reliable enough and led to other issues).  From Bob Moore
     and Lv Zheng.

   - intel_pstate fix to use del_timer_sync() instead of del_timer() in
     the exit path before freeing the timer structure from Dirk
     Brandewie (original patch from Thomas Gleixner).

   - cpufreq fix related to system resume from Viresh Kumar.

   - Serialization of frequency transitions in cpufreq that involve
     PRECHANGE and POSTCHANGE notifications to avoid ordering issues
     resulting from race conditions.  From Srivatsa S Bhat and Viresh
     Kumar.

   - Revert of an ACPI processor driver change that was based on a
     specific interpretation of the ACPI spec which may not be correct
     (the relevant part of the spec appears to be incomplete).  From
     Hanjun Guo.

   - Runtime PM core cleanups and documentation updates from Geert
     Uytterhoeven.

   - PNP core cleanup from Michael Opdenacker"

* tag 'pm+acpi-3.15-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Make cpufreq_notify_transition & cpufreq_notify_post_transition static
  cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}
  cpufreq: Make sure frequency transitions are serialized
  intel_pstate: Use del_timer_sync in intel_pstate_cpu_stop
  cpufreq: resume drivers before enabling governors
  PM / Runtime: Spelling s/competing/completing/
  PM / Runtime: s/foo_process_requests/foo_process_next_request/
  PM / Runtime: GENERIC_SUBSYS_PM_OPS is gone
  PM / Runtime: Correct documented return values for generic PM callbacks
  PM / Runtime: Split line longer than 80 characters
  PM / Runtime: dev_pm_info.runtime_error is signed
  Revert "ACPI / processor: Make it possible to get APIC ID via GIC"
  ACPICA: Enable auto-serialization as a default kernel behavior.
  ACPICA: Ignore sync_level for methods that have been auto-serialized.
  ACPICA: Add additional named objects for the auto-serialize method scan.
  ACPICA: Add auto-serialization support for ill-behaved control methods.
  ACPICA: Remove global option to serialize all control methods.
  PNP: remove deprecated IRQF_DISABLED

Pull powerpc non-virtualized cpuidle from Ben Herrenschmidt:
 "This is the branch I mentioned in my other pull request which contains
  our improved cpuidle support for the "powernv" platform
  (non-virtualized).

  It adds support for the "fast sleep" feature of the processor which
  provides higher power savings than our usual "nap" mode but at the
  cost of losing the timers while asleep, and thus exploits the new
  timer broadcast framework to work around that limitation.

  It's based on a tip timer tree that you seem to have already merged"

* 'powernv-cpuidle' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  cpuidle/powernv: Parse device tree to setup idle states
  cpuidle/powernv: Add "Fast-Sleep" CPU idle state
  powerpc/powernv: Add OPAL call to resync timebase on wakeup
  powerpc/powernv: Add context management for Fast Sleep
  powerpc: Split timer_interrupt() into timer handling and interrupt handling routines
  powerpc: Implement tick broadcast IPI as a fixed IPI message
  powerpc: Free up the slot of PPC_MSG_CALL_FUNC_SINGLE IPI message

Pull main powerpc updates from Ben Herrenschmidt:
 "This time around, the powerpc merges are going to be a little bit more
  complicated than usual.

  This is the main pull request with most of the work for this merge
  window.  I will describe it a bit more further down.

  There is some additional cpuidle driver work, however I haven't
  included it in this tree as it depends on some work in tip/timer-core
  which Thomas accidentally forgot to put in a topic branch.  Since I
  didn't want to carry all of that tip timer stuff in powerpc -next, I
  setup a separate branch on top of Thomas tree with just that cpuidle
  driver in it, and Stephen has been carrying that in next separately
  for a while now.  I'll send a separate pull request for it.

  Additionally, two new pieces in this tree add users for a sysfs API
  that Tejun and Greg have been deprecating in drivers-core-next.
  Thankfully Greg reverted the patch that removes the old API so this
  merge can happen cleanly, but once merged, I will send a patch
  adjusting our new code to the new API so that Greg can send you the
  removal patch.

  Now as for the content of this branch, we have a lot of perf work for
  power8 new counters including support for our new "nest" counters
  (also called 24x7) under pHyp (not natively yet).

  We have new functionality when running under the OPAL firmware
  (non-virtualized or KVM host), such as access to the firmware error
  logs and service processor dumps, system parameters and sensors, along
  with a hwmon driver for the latter.

  There's also a bunch of bug fixes accross the board, some LE fixes,
  and a nice set of selftests for validating our various types of copy
  loops.

  On the Freescale side, we see mostly new chip/board revisions, some
  clock updates, better support for machine checks and debug exceptions,
  etc..."

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (70 commits)
  powerpc/book3s: Fix CFAR clobbering issue in machine check handler.
  powerpc/compat: 32-bit little endian machine name is ppcle, not ppc
  powerpc/le: Big endian arguments for ppc_rtas()
  powerpc: Use default set of netfilter modules (CONFIG_NETFILTER_ADVANCED=n)
  powerpc/defconfigs: Enable THP in pseries defconfig
  powerpc/mm: Make sure a local_irq_disable prevent a parallel THP split
  powerpc: Rate-limit users spamming kernel log buffer
  powerpc/perf: Fix handling of L3 events with bank == 1
  powerpc/perf/hv_{gpci, 24x7}: Add documentation of device attributes
  powerpc/perf: Add kconfig option for hypervisor provided counters
  powerpc/perf: Add support for the hv 24x7 interface
  powerpc/perf: Add support for the hv gpci (get performance counter info) interface
  powerpc/perf: Add macros for defining event fields & formats
  powerpc/perf: Add a shared interface to get gpci version and capabilities
  powerpc/perf: Add 24x7 interface headers
  powerpc/perf: Add hv_gpci interface header
  powerpc: Add hvcalls for 24x7 and gpci (Get Performance Counter Info)
  sysfs: create bin_attributes under the requested group
  powerpc/perf: Enable BHRB access for EBB events
  powerpc/perf: Add BHRB constraint and IFM MMCRA handling for EBB
  ...

Pull MIPS updates from Ralf Baechle:
 - Support for Imgtec's Aptiv family of MIPS cores.
 - Improved detection of BCM47xx configurations.
 - Fix hiberation for certain configurations.
 - Add support for the Chinese Loongson 3 CPU, a MIPS64 R2 core and
   systems.
 - Detection and support for the MIPS P5600 core.
 - A few more random fixes that didn't make 3.14.
 - Support for the EVA Extended Virtual Addressing
 - Switch Alchemy to the platform PATA driver
 - Complete unification of Alchemy support
 - Allow availability of I/O cache coherency to be runtime detected
 - Improvments to multiprocessing support for Imgtec platforms
 - A few microoptimizations
 - Cleanups of FPU support
 - Paul Gortmaker's fixes for the init stuff
 - Support for seccomp

* 'mips-for-linux-next' of git://git.linux-mips.org/pub/scm/ralf/upstream-sfr: (165 commits)
  MIPS: CPC: Use __raw_ memory access functions
  MIPS: CM: use __raw_ memory access functions
  MIPS: Fix warning when including smp-ops.h with CONFIG_SMP=n
  MIPS: Malta: GIC IPIs may be used without MT
  MIPS: smp-mt: Use common GIC IPI implementation
  MIPS: smp-cmp: Remove incorrect core number probe
  MIPS: Fix gigaton of warning building with microMIPS.
  MIPS: Fix core number detection for MT cores
  MIPS: MT: core_nvpes function to retrieve VPE count
  MIPS: Provide empty mips_mt_set_cpuoptions when CONFIG_MIPS_MT=n
  MIPS: Lasat: Replace del_timer by del_timer_sync
  MIPS: Malta: Setup PM I/O region on boot
  MIPS: Loongson: Add a Loongson-3 default config file
  MIPS: Loongson 3: Add CPU hotplug support
  MIPS: Loongson 3: Add Loongson-3 SMP support
  MIPS: Loongson: Add Loongson-3 Kconfig options
  MIPS: Loongson: Add swiotlb to support All-Memory DMA
  MIPS: Loongson 3: Add serial port support
  MIPS: Loongson 3: Add IRQ init and dispatch support
  MIPS: Loongson 3: Add HT-linked PCI support
  ...

Commit 74397174 attempted to clean up the power management options
for arm64, but when things were merged it didn't fully take effect.  Fix
it again.
Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 old platform removal from Peter Anvin:
 "This patchset removes support for several completely obsolete
  platforms, where the maintainers either have completely vanished or
  acked the removal.  For some of them it is questionable if there even
  exists functional specimens of the hardware"

Geert Uytterhoeven apparently thought this was a April Fool's pull request ;)

* 'x86-nuke-platforms-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, platforms: Remove NUMAQ
  x86, platforms: Remove SGI Visual Workstation
  x86, apic: Remove support for IBM Summit/EXA chipset
  x86, apic: Remove support for ia32-based Unisys ES7000

Pull compat time conversion changes from Peter Anvin:
 "Despite the branch name this is really neither an x86 nor an
  x32-specific patchset, although it the implementation of the
  discussions that followed the x32 security hole a few months ago.

  This removes get/put_compat_timespec/val() and replaces them with
  compat_get/put_timespec/val() which are savvy as to the current status
  of COMPAT_USE_64BIT_TIME.

  It removes several unused and/or incorrect/misleading functions (like
  compat_put_timeval_convert which doesn't in fact do any conversion)
  and also replaces several open-coded implementations what is now
  called compat_convert_timespec() with that function"

* 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  compat: Fix sparse address space warnings
  compat: Get rid of (get|put)_compat_time(val|spec)

Pull x86 vdso changes from Peter Anvin:
 "This is the revamp of the 32-bit vdso and the associated cleanups.

  This adds timekeeping support to the 32-bit vdso that we already have
  in the 64-bit vdso.  Although 32-bit x86 is legacy, it is likely to
  remain in the embedded space for a very long time to come.

  This removes the traditional COMPAT_VDSO support; the configuration
  variable is reused for simply removing the 32-bit vdso, which will
  produce correct results but obviously suffer a performance penalty.
  Only one beta version of glibc was affected, but that version was
  unfortunately included in one OpenSUSE release.

  This is not the end of the vdso cleanups.  Stefani and Andy have
  agreed to continue work for the next kernel cycle; in fact Andy has
  already produced another set of cleanups that came too late for this
  cycle.

  An incidental, but arguably important, change is that this ensures
  that unused space in the VVAR page is properly zeroed.  It wasn't
  before, and would contain whatever garbage was left in memory by BIOS
  or the bootloader.  Since the VVAR page is accessible to user space
  this had the potential of information leaks"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86, vdso: Fix the symbol versions on the 32-bit vDSO
  x86, vdso, build: Don't rebuild 32-bit vdsos on every make
  x86, vdso: Actually discard the .discard sections
  x86, vdso: Fix size of get_unmapped_area()
  x86, vdso: Finish removing VDSO32_PRELINK
  x86, vdso: Move more vdso definitions into vdso.h
  x86: Load the 32-bit vdso in place, just like the 64-bit vdsos
  x86, vdso32: handle 32 bit vDSO larger one page
  x86, vdso32: Disable stack protector, adjust optimizations
  x86, vdso: Zero-pad the VVAR page
  x86, vdso: Add 32 bit VDSO time support for 64 bit kernel
  x86, vdso: Add 32 bit VDSO time support for 32 bit kernel
  x86, vdso: Patch alternatives in the 32-bit VDSO
  x86, vdso: Introduce VVAR marco for vdso32
  x86, vdso: Cleanup __vdso_gettimeofday()
  x86, vdso: Replace VVAR(vsyscall_gtod_data) by gtod macro
  x86, vdso: __vdso_clock_gettime() cleanup
  x86, vdso: Revamp vclock_gettime.c
  mm: Add new func _install_special_mapping() to mmap.c
  x86, vdso: Make vsyscall_gtod_data handling x86 generic
  ...

Pull x86 boot changes from Peter Anvin:
 "This patchset is a set of cleanups aiming at librarize some of the
  common code from the boot environments.  We currently have three
  different "little environments" (boot, boot/compressed, and
  realmode/rm) in x86, and we are likely to soon get a fourth one
  (kexec/purgatory, which will have to be integrated in the kernel to
  support secure kexec).  This is primarily a cleanup in the
  anticipation of the latter.

  While Vivek implemented this, he ran into some bugs, in particular the
  memcmp implementation for when gcc punts from using the builtin would
  have a misnamed symbol, causing compilation errors if we were ever
  unlucky enough that gcc didn't want to inline the test"

* 'x86/boot' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, boot: Move memset() definition in compressed/string.c
  x86, boot: Move memcmp() into string.h and string.c
  x86, boot: Move optimized memcpy() 32/64 bit versions to compressed/string.c
  x86, boot: Create a separate string.h file to provide standard string functions
  x86, boot: Undef memcmp before providing a new definition

Pull Metag architecture changes from James Hogan:
 - Remove unused NUMA definition (SD_NODE_INIT)
 - Refactor signal code to use struct ksignal
 - IRQ migration cleanup to use irq_set_affinity
 - Clean up main Kconfig file a little

* tag 'metag-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  sched: remove unused SCHED_INIT_NODE
  metag: Use get_signal() signal_setup_done()
  metag: Fix METAG Kconfig symbol select ordering
  metag: Use irq_set_affinity instead of homebrewn code

Commit 2223f6f6 "x86: Clean up dumpstack_64.c code" changed
the irq_stack processing a little from what it was before.
The irq_stack_end variable needed to be cleared after its first
use. By setting irq_stack to the per cpu irq_stack and passing
that to analyze_stack(), and then clearing it after it is processed,
we can get back the original behavior.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 2223f6f6 "x86: Clean up dumpstack_64.c code" moved the used
variable to a local within the loop, but the in_exception_stack()
depended on being non-volatile with the ability to change it.

By always re-initializing the "used" variable to zero, it would cause
the in_exception_stack() to return the same thing each time, and
cause the dump_stack loop to go into an infinite loop.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block driver update from Jens Axboe:
 "On top of the core pull request, here's the pull request for the
  driver related changes for 3.15.  It contains:

   - Improvements for msi-x registration for block drivers (mtip32xx,
     skd, cciss, nvme) from Alexander Gordeev.

   - A round of cleanups and improvements for drbd from Andreas
     Gruenbacher and Rashika Kheria.

   - A round of clanups and improvements for bcache from Kent.

   - Removal of sleep_on() and friends in DAC960, ataflop, swim3 from
     Arnd Bergmann.

   - Bug fix for a bug in the mtip32xx async completion code from Sam
     Bradshaw.

   - Bug fix for accidentally bouncing IO on 32-bit platforms with
     mtip32xx from Felipe Franciosi"

* 'for-3.15/drivers' of git://git.kernel.dk/linux-block: (103 commits)
  bcache: remove nested function usage
  bcache: Kill bucket->gc_gen
  bcache: Kill unused freelist
  bcache: Rework btree cache reserve handling
  bcache: Kill btree_io_wq
  bcache: btree locking rework
  bcache: Fix a race when freeing btree nodes
  bcache: Add a real GC_MARK_RECLAIMABLE
  bcache: Add bch_keylist_init_single()
  bcache: Improve priority_stats
  bcache: Better alloc tracepoints
  bcache: Kill dead cgroup code
  bcache: stop moving_gc marking buckets that can't be moved.
  bcache: Fix moving_pred()
  bcache: Fix moving_gc deadlocking with a foreground write
  bcache: Fix discard granularity
  bcache: Fix another bug recovering from unclean shutdown
  bcache: Fix a bug recovering from unclean shutdown
  bcache: Fix a journalling reclaim after recovery bug
  bcache: Fix a null ptr deref in journal replay
  ...

Pull core block layer updates from Jens Axboe:
 "This is the pull request for the core block IO bits for the 3.15
  kernel.  It's a smaller round this time, it contains:

   - Various little blk-mq fixes and additions from Christoph and
     myself.

   - Cleanup of the IPI usage from the block layer, and associated
     helper code.  From Frederic Weisbecker and Jan Kara.

   - Duplicate code cleanup in bio-integrity from Gu Zheng.  This will
     give you a merge conflict, but that should be easy to resolve.

   - blk-mq notify spinlock fix for RT from Mike Galbraith.

   - A blktrace partial accounting bug fix from Roman Pen.

   - Missing REQ_SYNC detection fix for blk-mq from Shaohua Li"

* 'for-3.15/core' of git://git.kernel.dk/linux-block: (25 commits)
  blk-mq: add REQ_SYNC early
  rt,blk,mq: Make blk_mq_cpu_notify_lock a raw spinlock
  blk-mq: support partial I/O completions
  blk-mq: merge blk_mq_insert_request and blk_mq_run_request
  blk-mq: remove blk_mq_alloc_rq
  blk-mq: don't dump CPU -> hw queue map on driver load
  blk-mq: fix wrong usage of hctx->state vs hctx->flags
  blk-mq: allow blk_mq_init_commands() to return failure
  block: remove old blk_iopoll_enabled variable
  blktrace: fix accounting of partially completed requests
  smp: Rename __smp_call_function_single() to smp_call_function_single_async()
  smp: Remove wait argument from __smp_call_function_single()
  watchdog: Simplify a little the IPI call
  smp: Move __smp_call_function_single() below its safe version
  smp: Consolidate the various smp_call_function_single() declensions
  smp: Teach __smp_call_function_single() to check for offline cpus
  smp: Remove unused list_head from csd
  smp: Iterate functions through llist_for_each_entry_safe()
  block: Stop abusing rq->csd.list in blk-softirq
  block: Remove useless IPI struct initialization
  ...

Pull first round of SCSI updates from James Bottomley:
 "This patch consists of the usual driver updates (megaraid_sas,
  scsi_debug, qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus
  an assortment of minor fixes and the first precursors of SCSI-MQ (the
  code path simplifications) and the bug fix for the USB oops on remove
  (which involves an infrastructure change, so is sent via the main tree
  with a delayed backport after a cycle in which it is shown to
  introduce no new bugs)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (196 commits)
  [SCSI] sd: Quiesce mode sense error messages
  [SCSI] add support for per-host cmd pools
  [SCSI] simplify command allocation and freeing a bit
  [SCSI] megaraid: simplify internal command handling
  [SCSI] ses: Use vpd information from scsi_device
  [SCSI] Add EVPD page 0x83 and 0x80 to sysfs
  [SCSI] Return VPD page length in scsi_vpd_inquiry()
  [SCSI] scsi_sysfs: Implement 'is_visible' callback
  [SCSI] hpsa: update driver version to 3.4.4-1
  [SCSI] hpsa: fix bad endif placement in RAID 5 mapper code
  [SCSI] qla2xxx: Fix build errors related to invalid print fields on some architectures.
  [SCSI] bfa: Replace large udelay() with mdelay()
  [SCSI] vmw_pvscsi: Some improvements in pvscsi driver.
  [SCSI] vmw_pvscsi: Add support for I/O requests coalescing.
  [SCSI] vmw_pvscsi: Fix pvscsi_abort() function.
  [SCSI] remove deprecated IRQF_DISABLED from SCSI
  [SCSI] bfa: Updating Maintainers email ids
  [SCSI] ipr: Add new CCIN definition for Grand Canyon support
  [SCSI] ipr: Format HCAM overlay ID 0x21
  [SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range()
  ...

Pull USB patches from Greg KH:
 "Here's the big USB pull request for 3.15-rc1.

  The normal set of patches, lots of controller driver updates, and a
  smattering of individual USB driver updates as well.

  All have been in linux-next for a while"

* tag 'usb-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (249 commits)
  xhci: Transition maintainership to Mathias Nyman.
  USB: disable reset-resume when USB_QUIRK_RESET is set
  USB: unbind all interfaces before rebinding any
  usb: phy: Add ulpi IDs for SMSC USB3320 and TI TUSB1210
  usb: gadget: tcm_usb_gadget: stop format strings
  usb: gadget: f_fs: add missing spinlock and mutex unlock
  usb: gadget: composite: switch over to ERR_CAST()
  usb: gadget: inode: switch over to memdup_user()
  usb: gadget: f_subset: switch over to PTR_RET
  usb: gadget: lpc32xx_udc: fix wrong clk_put() sequence
  USB: keyspan: remove dead debugging code
  USB: serial: add missing newlines to dev_<level> messages.
  USB: serial: add missing braces
  USB: serial: continue to write on errors
  USB: serial: continue to read on errors
  USB: serial: make bulk_out_size a lower limit
  USB: cypress_m8: fix potential scheduling while atomic
  devicetree: bindings: document lsi,zevio-usb
  usb: chipidea: add support for USB OTG controller on LSI Zevio SoCs
  usb: chipidea: imx: Use dev_name() for ci_hdrc name to distinguish USBs
  ...

Pull tty/serial driver update from Greg KH:
 "Here's the big tty/serial driver update for 3.15-rc1.

  Nothing major, a number of serial driver updates and a few tty core
  fixes as well.

  All have been in linux-next for a while"

* tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
  tty/serial: omap: empty the RX FIFO at the end of half-duplex TX
  tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX
  serial: sh-sci: Neaten dev_<level> uses
  serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF
  serial: sh-sci: Add more register documentation
  serial: sh-sci: Remove useless casts
  serial: sh-sci: Replace printk() by pr_*()
  serial_core: Avoid NULL pointer dereference in uart_close()
  serial_core: Get a reference for port->tty in uart_remove_one_port()
  serial: clps711x: Give a chance to perform useful tasks during wait loop
  serial_core: Grammar s/ports/port's/
  serial_core: Spelling s/contro/control/
  serial: efm32: properly namespace location property
  serial: max310x: Add missing #include <linux/uaccess.h>
  synclink: fix info leak in ioctl
  serial: 8250: Clean up the locking for -rt
  serial: 8250_pci: change BayTrail default uartclk
  serial: 8250_pci: more BayTrail error-free bauds
  serial: sh-sci: Add missing call to uart_remove_one_port() in failure path
  serial_core: Unregister console in uart_remove_one_port()
  ...

Pull staging driver updates from Greg KH:
 "Here's the huge drivers/staging/ update for 3.15-rc1.

  Loads of cleanup fixes, a few drivers removed, and some new ones
  added.

  All have been in linux-next for a while"

* tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits)
  staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI
  staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig
  staging: comedi: poc: remove obsolete driver
  staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE
  staging: octeon-usb: prevent memory corruption
  staging: usbip: fix line over 80 characters
  staging: usbip: fix quoted string split across lines
  Staging: unisys: Remove RETINT macro
  Staging: unisys: Remove FAIL macro
  Staging: unisys: Remove RETVOID macro
  Staging: unisys: Remove RETPTR macro
  Staging: unisys: Remove RETBOOL macro
  Staging: unisys: Remove FAIL_WPOSTCODE_1 macro
  Staging: unisys: Cleanup macros to get rid of goto statements
  Staging: unisys: include: Remove unused macros from timskmod.h
  staging: dgap: fix the rest of the checkpatch warnings in dgap.c
  Staging: bcm: Remove unnecessary parentheses
  staging: wlags49_h2: Delete unnecessary braces
  staging: wlags49_h2: Do not use assignment in if condition
  staging: wlags49_h2: Enclose macro in a do-while loop
  ...

Merge tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and sysfs updates from Greg KH:
 "Here's the big driver core / sysfs update for 3.15-rc1.

  Lots of kernfs updates to make it useful for other subsystems, and a
  few other tiny driver core patches.

  All have been in linux-next for a while"

* tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits)
  Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()"
  kernfs: cache atomic_write_len in kernfs_open_file
  numa: fix NULL pointer access and memory leak in unregister_one_node()
  Revert "driver core: synchronize device shutdown"
  kernfs: fix off by one error.
  kernfs: remove duplicate dir.c at the top dir
  x86: align x86 arch with generic CPU modalias handling
  cpu: add generic support for CPU feature based module autoloading
  sysfs: create bin_attributes under the requested group
  driver core: unexport static function create_syslog_header
  firmware: use power efficient workqueue for unloading and aborting fw load
  firmware: give a protection when map page failed
  firmware: google memconsole driver fixes
  firmware: fix google/gsmi duplicate efivars_sysfs_init()
  drivers/base: delete non-required instances of include <linux/init.h>
  kernfs: fix kernfs_node_from_dentry()
  ACPI / platform: drop redundant ACPI_HANDLE check
  kernfs: fix hash calculation in kernfs_rename_ns()
  kernfs: add CONFIG_KERNFS
  sysfs, kobject: add sysfs wrapper for kernfs_enable_ns()
  ...

Pull char/misc driver patches from Greg KH:
 "Here's the big char/misc driver updates for 3.15-rc1.

  Lots of various things here, including the new mcb driver subsystem.

  All of these have been in linux-next for a while"

* tag 'char-misc-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (118 commits)
  extcon: Move OF helper function to extcon core and change function name
  extcon: of: Remove unnecessary function call by using the name of device_node
  extcon: gpio: Use SIMPLE_DEV_PM_OPS macro
  extcon: palmas: Use SIMPLE_DEV_PM_OPS macro
  mei: don't use deprecated DEFINE_PCI_DEVICE_TABLE macro
  mei: amthif: fix checkpatch error
  mei: client.h fix checkpatch errors
  mei: use cl_dbg where appropriate
  mei: fix Unnecessary space after function pointer name
  mei: report consistently copy_from/to_user failures
  mei: drop pr_fmt macros
  mei: make me hw headers private to me hw.
  mei: fix memory leak of pending write cb objects
  mei: me: do not reset when less than expected data is received
  drivers: mcb: Fix build error discovered by 0-day bot
  cs5535-mfgpt: Simplify dependencies
  spmi: pm: drop bus-level PM suspend/resume routines
  spmi: pmic_arb: make selectable on ARCH_QCOM
  Drivers: hv: vmbus: Increase the limit on the number of pfns we can handle
  pch_phub: Report error writing MAC back to user
  ...

Pull sound updates from Takashi Iwai:
 "There have been lots of changes in ALSA core, HD-audio and ASoC, also
  most of PCI drivers touched by conversions of printks.  All these
  resulted in a high volume and wide ranged patch sets in this release.
  Many changes are fairly trivial, but also lots of nice cleanups and
  refactors.  There are a few new drivers, most notably, the Intel
  Haswell and Baytrail ASoC driver.

  Core changes:
   - A bit modernization; embed the device struct into snd_card struct,
     so that it may be referred from the beginning.  A new
     snd_card_new() function is introduced for that, and all drivers
     have been converted.

   - Simplification in the device management code in ALSA core; now
     managed by a simple priority list instead

   - Converted many kernel messages to use the standard dev_err() & co;
     this would be the pretty visible difference, especially for
     HD-audio.

  HD-audio:
   - Conexant codecs use the auto-parser as default now; the old static
     code still remains in case of regressions.  Some old quirks have
     been rewritten with the fixups for auto-parser.

   - C-Media codecs also use the auto-parser as default now, too.

   - A device struct is assigned to each HD-audio codec, and the
     formerly hwdep attributes are accessible over the codec sysfs, too.
     hwdep attributes still remain for compatibility.

   - Split the PCI-specific stuff for HD-audio controller into a
     separate module, ane make a helper module for the generic
     controller driver.  This is a preliminary change for supporting
     Tegra HDMI controller in near future, which slipped from 3.15
     merge.

   - Device-specific fixes: mute LED support for Lenovo Ideapad, mic LED
     fix for HP laptops, more ASUS subwoofer quirks, yet more Dell
     laptop headset quirks

   - Make the HD-audio codec response a bit more robust

   - A few improvements on Realtek ALC282 / 283 about the pop noises

   - A couple of Intel HDMI fixes

  ASoC:
   - Lots of cleanups for enumerations; refactored lots of error prone
     original codes to use more modern APIs

   - Elimination of the ASoC level wrappers for I2C and SPI moving us
     closer to converting to regmap completely and avoiding some
     randconfig hassle

   - Provide both manually and transparently locked DAPM APIs rather
     than a mix of the two fixing some concurrency issues

   - Start converting CODEC drivers to use separate bus interface
     drivers rather than having them all in one file helping avoid
     dependency issues

   - DPCM support for Intel Haswell and Bay Trail platforms, lots of
     fixes

   - Lots of work on improvements for simple-card, DaVinci and the
     Renesas rcar drivers.

   - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of
     the CSR SiRF SoC, TLV320AIC31XXX, Armada 370 DB, Cirrus cs42xx8

   - Fixes for the simple-card DAI format DT mess

   - DT support for a couple more devices.

   - Use of the tdm_slot mapping in a few drivers

  Others:
   - Support of reset_resume callback for improved S4 in USB-audio
     driver; the device with boot quirks have been little tested, which
     we need to watch out in this development cycle

   - Add PM support for ICE1712 driver (finally!); it's still pretty
     partial support, only for M-Audio devices"

* tag 'sound-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (610 commits)
  ALSA: ice1712: Add suspend support for M-Audio ICE1712-based cards
  ALSA: ice1712: add suspend support for ICE1712 chip
  ALSA: hda - Enable beep for ASUS 1015E
  ALSA: asihpi: fix some indenting in snd_card_asihpi_pcm_new()
  ALSA: hda - add headset mic detect quirks for three Dell laptops
  ASoC: tegra: move AC97 clock handling to the machine driver
  ASoC: simple-card: Handle many DAI links
  ASoC: simple-card: Add DT documentation for multi-DAI links
  ASoC: simple-card: dynamically allocate the DAI link and properties
  ASoC: imx-ssi: Add .xlate_tdm_slot_mask() support.
  ASoC: fsl-esai: Add .xlate_tdm_slot_mask() support.
  ASoC: fsl-utils: Add fsl_asoc_xlate_tdm_slot_mask() support.
  ASoC: core: remove the 'of_' prefix of of_xlate_tdm_slot_mask.
  ASoC: rcar: subnode tidyup for renesas,rsnd.txt
  ASoC: Remove name_prefix unset during DAI link init hack
  ALSA: hda - Inform the unexpectedly ignored pins by auto-parser
  ASoC: rcar: bugfix: it cares about the non-src case
  ARM: bockw: fixup SND_SOC_DAIFMT_CBx_CFx flags
  ASoC: pcm: Drop incorrect double/extra frees
  ASoC: mfld_machine: Fix compile error
  ...

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
   - Increment max correctly in pci_scan_bridge() (Andreas Noever)
   - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
   - Assign CardBus bus number only during the second pass (Andreas Noever)
   - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
   - Make sure bus number resources stay within their parents bounds (Andreas Noever)
   - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
   - Check for child busses which use more bus numbers than allocated (Andreas Noever)
   - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
   - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
   - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
   - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)

  NUMA
   - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
   - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
   - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
   - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)

  Resource management
   - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
   - Add resource_contains() (Bjorn Helgaas)
   - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
   - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
   - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
   - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
   - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
   - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
   - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
   - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
   - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
   - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
   - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
   - Set type in __request_region() (Bjorn Helgaas)
   - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
   - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
   - Log IDE resource quirk in dmesg (Bjorn Helgaas)
   - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)

  PCI device hotplug
   - Make check_link_active() non-static (Rajat Jain)
   - Use link change notifications for hot-plug and removal (Rajat Jain)
   - Enable link state change notifications (Rajat Jain)
   - Don't disable the link permanently during removal (Rajat Jain)
   - Don't check adapter or latch status while disabling (Rajat Jain)
   - Disable link notification across slot reset (Rajat Jain)
   - Ensure very fast hotplug events are also processed (Rajat Jain)
   - Add hotplug_lock to serialize hotplug events (Rajat Jain)
   - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
   - Don't turn slot off when hot-added device already exists (Yijing Wang)

  MSI
   - Keep pci_enable_msi() documentation (Alexander Gordeev)
   - ahci: Fix broken single MSI fallback (Alexander Gordeev)
   - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
   - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
   - Fix leak of msi_attrs (Greg Kroah-Hartman)
   - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)

  Virtualization
   - Device-specific ACS support (Alex Williamson)

  Freescale i.MX6
   - Wait for retraining (Marek Vasut)

  Marvell MVEBU
   - Use Device ID and revision from underlying endpoint (Andrew Lunn)
   - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
   - Call request_resource() on the apertures (Jason Gunthorpe)
   - Fix potential issue in range parsing (Jean-Jacques Hiblot)

  Renesas R-Car
   - Check platform_get_irq() return code (Ben Dooks)
   - Add error interrupt handling (Ben Dooks)
   - Fix bridge logic configuration accesses (Ben Dooks)
   - Register each instance independently (Magnus Damm)
   - Break out window size handling (Magnus Damm)
   - Make the Kconfig dependencies more generic (Magnus Damm)

  Synopsys DesignWare
   - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)

  Miscellaneous
   - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
   - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
   - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
   - Clean up par-arch object file list (Liviu Dudau)
   - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
   - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
   - Fix pci_bus_b() build failure (Paul Gortmaker)"

* tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  Revert "[PATCH] Insert GART region into resource map"
  PCI: Log IDE resource quirk in dmesg
  PCI: Change pci_bus_alloc_resource() type_mask to unsigned long
  PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()
  resources: Set type in __request_region()
  PCI: Don't check resource_size() in pci_bus_alloc_resource()
  s390/PCI: Use generic pci_enable_resources()
  tile PCI RC: Use default pcibios_enable_device()
  sparc/PCI: Use default pcibios_enable_device() (Leon only)
  sh/PCI: Use default pcibios_enable_device()
  microblaze/PCI: Use default pcibios_enable_device()
  alpha/PCI: Use default pcibios_enable_device()
  PCI: Add "weak" generic pcibios_enable_device() implementation
  PCI: Don't enable decoding if BAR hasn't been assigned an address
  PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
  PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit
  PCI: Don't try to claim IORESOURCE_UNSET resources
  PCI: Check IORESOURCE_UNSET before updating BAR
  PCI: Don't clear IORESOURCE_UNSET when updating BAR
  PCI: Mark resources as IORESOURCE_UNSET if we can't assign them
  ...

Conflicts:
	arch/x86/include/asm/topology.h
	drivers/ata/ahci.c

Pull EDAC updates from Borislav Petkov:
 "A bunch of EDAC updates all over the place:

   - Support for new AMD models, along with more graceful fallback for
     unsupported hw.

   - Bunch of fixes from SUSE accumulated from bug reports

   - Misc other fixes and cleanups"

* tag 'edac_for_3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Add support for newer F16h models
  i7core_edac: Drop unused variable
  i82875p_edac: Drop redundant call to pci_get_device()
  amd8111_edac: Fix leaks in probe error paths
  e752x_edac: Drop pvt->bridge_ck
  MCE, AMD: Fix decoding module loading on unsupported hw
  i5100_edac: Remove an unneeded condition in i5100_init_csrows()
  sb_edac: Degrade log level for device registration
  amd64_edac: Fix logic to determine channel for F15 M30h processors
  edac/85xx: Remove deprecated IRQF_DISABLED
  i3200_edac: Add a missing pci_disable_device() on the exit path
  i5400_edac: Disable device when unloading module
  e752x_edac: Simplify call to pci_get_device()

Pull hwmon updates from Guenter Roeck:
 - New drivers for ADC128D818, LTC2945, LTC4260, and LTC4222
 - Added support for LTM4676 to ltc2978 driver
 - Converted several drivers to use devm_hwmon_device_register_with_groups
 - Various cleanup in several drivers

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (36 commits)
  hwmon: (pmbus/ltc2978) Add support for LTM4676
  hwmon: (pmbus/ltc2978) Add new chip ID for LTC2974
  hwmon: Do not accept invalid name attributes
  hwmon: (max6639) Use SIMPLE_DEV_PM_OPS macro
  hwmon: (lm95245) Make temp2_crit_hyst read-only
  hwmon: (lm95245) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (lm95245) Drop useless debug message
  hwmon: (lm95245) Fix hysteresis temperatures
  hwmon: (max6639) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max6639) Introduce local dev variable, and reduce noisiness
  hwmon: (max6650) Introduce local 'dev' variable
  hwmon: (max6650) Drop error message after memory allocation failures
  hwmon: (max6650) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (max6650) Rearrange code to no longer require forward declarations
  hwmon: (ltc4215) Convert to devm_hwmon_device_register_with_groups
  hwmon: (coretemp) Convert to use devm_hwmon_device_register_with_groups
  hwmon: (coretemp) Allocate platform data with devm_kzalloc
  hwmon: (coretemp) Use sysfs_create_group to create sysfs attributes
  hwmon: (ltc4245) Remove devicetree conditionals
  hwmon: (ltc4245) Drop debug messages
  ...

Pull watchdog updates from Wim Van Sebroeck:
 "This patchset contains:
   - Various small clean-ups and fixes
   - boot logic hanegs for mpc8xxx_wdt
   - it87_wdt: Work around non-working CIR interrupts
   - iTCO_wdt: Fix the parent device
   - Kconfig dependencies
   - simplification of code with devm_ioremap_resource() or
     platform_driver_probe()
   - conversion of xilinx watchdog driver to Generic watchdog Framework
   - addition of extra functionality and devices for the xilinx watchdog
     driver
   - Addition of Tegra watchdog"

* git://www.linux-watchdog.org/linux-watchdog: (38 commits)
  watchdog: Fix Elan SC520 dependencies
  watchdog: ib700wdt: Use platform_driver_probe
  watchdog: geodewdt: Use platform_driver_probe
  watchdog: advantechwdt: Use platform_driver_probe
  watchdog: acquirewdt: Use platform_driver_probe
  watchdog: iTCO_wdt: Fix the parent device
  watchdog: it87_wdt: Work around non-working CIR interrupts
  watchdog: bcm281xx: Fix Kconfig dependency
  watchdog: s3c2410_wdt: Check return value of clk_prepare_enable
  watchdog: s3c2410_wdt: Remove unneeded initialization
  watchdog: sunxi: Change compatibles
  watchdog: orion: prepare new Dove DT Kconfig variable
  watchdog: fix checkpatch warnings and error
  watchdog: Add tegra watchdog
  watchdog: xilinx: Remove no_timeout variable
  watchdog: xilinx: Enable this driver for Zynq
  watchdog: xilinx: Add missing binding
  watchdog: xilinx: Use correct comment indentation
  watchdog: xilinx: Use of_property_read_u32
  watchdog: xilinx: Fix all printk messages
  ...

CONFIG_PROC_DEVICETREE has been removed from the tree. This commit
removes a dangling select of the config symbol.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Rob Herring <rob.herring@linaro.org>

Pull spi Updates from Mark Brown:
 "A busy release for both cleanups and new drivers this time along with
  further factoring out of replicated code into the core:

   - Provide support in the core for DMA mapping transfers - essentially
     all drivers weren't implementing this properly, now there's no
     excuse.
   - Dual and quad mode support for spidev.
   - Fix handling of cs_change in the generic implementation.
   - Remove the S3C_DMA code from the s3c64xx driver now that all the
     platforms using it have been converted to dmaengine.
   - Lots of improvements to the Renesas SPI controllers.
   - Drivers for Allwinner A10 and A31, Qualcomm QUP and Xylinx xtfpga.
   - Removal of the bitrotted ti-ssp driver"

* tag 'spi-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (199 commits)
  spi: Fix handling of cs_change in core implementation
  spi: bitbang: Make spi_bitbang_stop() return void
  spi: mpc52xx: Convert to use bits_per_word_mask
  spi: omap-100k: Fix memory leak
  spi: dw: Don't call kfree for memory allocated by devm_kzalloc
  spi: fsl-dspi: Fix memory leak
  spi: omap-uwire: add missing iounmap
  spi: clps711x: Convert to use master->max_speed_hz
  spi: clps711x: Enable driver compilation with COMPILE_TEST
  spi: omap-uwire: Remove full duplex check
  spi: Do not require a completion
  spi: topcliff-pch: Transform noisy message to dev_vdbg
  spi: coldfire-qspi: Simplify the code to set register bits for transfer speed
  spi: bcm63xx: Remove unused define for PFX
  spi: efm32: use $vendor,$device scheme for compatible string
  spi: clps711x: Remove <mach/hardware.h> dependency
  spi: topcliff-pch: Properly unregister platform devices on probe() error paths
  spi: fsl-espi: Remove unused bits_per_word variable in fsl_espi_bufs
  spi: altera: Remove the code to get unused platform_data
  spi: fsl-lib: Fix memory leak of pinfo
  ...

Pull regulator updates from Mark Brown:
 "This release has lots and lots of small cleanups and fixes in the
  regulator subsystem, mainly cleaning up some bad patterns that got
  duplicated in DT code, but otherwise very little of note outside of
  the scope of the relevant drivers:

   - Support for configuration of the initial state for gpio regulators
     with multi-voltage support.
   - Support for calling regulator_set_voltage() on fixed regulators.
   - New drivers for Broadcom BCM590xx, Freescale pfuze200, Samsung
     S2MPA01 & S2MPS11/4, some PWM controlled regulators found on some
     ST boards and TI TPS65218"

* tag 'regulator-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (154 commits)
  regulator: aat2870: Use regulator_map_voltage_ascend
  regulator: st-pwm: Convert to get_voltage_sel
  regulator: Add new driver for ST's PWM controlled voltage regulators
  regulator: bcm590xx: Remove **rdev from struct bcm590xx_reg
  regulator: bcm590xx: Make the modalias matches the driver name
  regulator: s5m8767: Convert to use regulator_[enable|disable|is_enabled]_regmap
  regulator: db8500-prcmu: Set 1.8V as a fixed voltage for vsmps2
  regulator: s2mps11: Add missing of_node_put
  regulator: s2mps11: Use of_get_child_by_name
  Documentation: mfd: s2mps11: Document support for S2MPS14
  regulator: s2mps11: Add set_suspend_disable for S2MPS14
  regulator: s2mps11: Add support for S2MPS14 regulators
  regulator: max8660: Fix brace alignment
  regulator: dbx500: use seq_puts() instead of seq_printf()
  regulator: dbx500-prcmu: Silence checkpatch warnings
  regulator: anatop: Remove checking control_reg in [set|get]_voltage_sel
  regulator: max8952: Silence checkpatch warning
  regulator: max8925: Silence checkpatch warning
  regulator: max8660: Silence checkpatch warnings
  regulator: arizona-ldo1: Correct default regulator init_data
  ...