- 09 Jan, 2014 32 commits
-
-
Jan Kara authored
commit 30fac0f7 upstream. When the filesystem doesn't support extents (like in ext2/3 compatibility modes), there is no need to reserve any clusters. Space estimates for writing are exact, hole punching doesn't need new metadata, and there are no unwritten extents to convert. This fixes a problem when filesystem still having some free space when accessed with a native ext2/3 driver suddently reports ENOSPC when accessed with ext4 driver. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eryu Guan authored
commit 5946d089 upstream. A corrupted ext4 may have out of order leaf extents, i.e. extent: lblk 0--1023, len 1024, pblk 9217, flags: LEAF UNINIT extent: lblk 1000--2047, len 1024, pblk 10241, flags: LEAF UNINIT ^^^^ overlap with previous extent Reading such extent could hit BUG_ON() in ext4_es_cache_extent(). BUG_ON(end < lblk); The problem is that __read_extent_tree_block() tries to cache holes as well but assumes 'lblk' is greater than 'prev' and passes underflowed length to ext4_es_cache_extent(). Fix it by checking for overlapping extents in ext4_valid_extent_entries(). I hit this when fuzz testing ext4, and am able to reproduce it by modifying the on-disk extent by hand. Also add the check for (ee_block + len - 1) in ext4_valid_extent() to make sure the value is not overflow. Ran xfstests on patched ext4 and no regression. Cc: Lukáš Czerner <lczerner@redhat.com> Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Junho Ryu authored
commit 4e8d2139 upstream. ext4_mb_put_pa should hold pa->pa_lock before accessing pa->pa_count. While ext4_mb_use_preallocated checks pa->pa_deleted first and then increments pa->count later, ext4_mb_put_pa decrements pa->pa_count before holding pa->pa_lock and then sets pa->pa_deleted. * Free sequence ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count ext4_mb_put_pa (2): lock pa->pa_lock ext4_mb_put_pa (3): check pa->pa_deleted ext4_mb_put_pa (4): set pa->pa_deleted=1 ext4_mb_put_pa (5): unlock pa->pa_lock ext4_mb_put_pa (6): remove pa from a list ext4_mb_pa_callback: free pa * Use sequence ext4_mb_use_preallocated (1): iterate over preallocation ext4_mb_use_preallocated (2): lock pa->pa_lock ext4_mb_use_preallocated (3): check pa->pa_deleted ext4_mb_use_preallocated (4): increase pa->pa_count ext4_mb_use_preallocated (5): unlock pa->pa_lock ext4_mb_release_context: access pa * Use-after-free sequence [initial status] <pa->pa_deleted = 0, pa_count = 1> ext4_mb_use_preallocated (1): iterate over preallocation ext4_mb_use_preallocated (2): lock pa->pa_lock ext4_mb_use_preallocated (3): check pa->pa_deleted ext4_mb_put_pa (1): atomic_dec_and_test pa->pa_count [pa_count decremented] <pa->pa_deleted = 0, pa_count = 0> ext4_mb_use_preallocated (4): increase pa->pa_count [pa_count incremented] <pa->pa_deleted = 0, pa_count = 1> ext4_mb_use_preallocated (5): unlock pa->pa_lock ext4_mb_put_pa (2): lock pa->pa_lock ext4_mb_put_pa (3): check pa->pa_deleted ext4_mb_put_pa (4): set pa->pa_deleted=1 [race condition!] <pa->pa_deleted = 1, pa_count = 1> ext4_mb_put_pa (5): unlock pa->pa_lock ext4_mb_put_pa (6): remove pa from a list ext4_mb_pa_callback: free pa ext4_mb_release_context: access pa AddressSanitizer has detected use-after-free in ext4_mb_new_blocks Bug report: http://goo.gl/rG1On3Signed-off-by:
Junho Ryu <jayr@google.com> Signed-off-by:
-
Theodore Ts'o authored
commit ae1495b1 upstream. While it's true that errors can only happen if there is a bug in jbd2_journal_dirty_metadata(), if a bug does happen, we need to halt the kernel or remount the file system read-only in order to avoid further data loss. The ext4_journal_abort_handle() function doesn't do any of this, and while it's likely that this call (since it doesn't adjust refcounts) will likely result in the file system eventually deadlocking since the current transaction will never be able to close, it's much cleaner to call let ext4's error handling system deal with this situation. There's a separate bug here which is that if certain jbd2 errors errors occur and file system is mounted errors=continue, the file system will probably eventually end grind to a halt as described above. But things have been this way in a long time, and usually when we have these sorts of errors it's pretty much a disaster --- and that's why the jbd2 layer aggressively retries memory allocations, which is the most likely cause of these jbd2 errors. Signed-off-by:
-
Len Brown authored
commit 40e2d7f9 upstream. Linux 3.10 changed the timing of how thread_info->flags is touched: x86: Use generic idle loop (7d1a9417) This caused Intel NHM-EX and WSM-EX servers to experience a large number of immediate MONITOR/MWAIT break wakeups, which caused cpuidle to demote from deep C-states to shallow C-states, which caused these platforms to experience a significant increase in idle power. Note that this issue was already present before the commit above, however, it wasn't seen often enough to be noticed in power measurements. Here we extend an errata workaround from the Core2 EX "Dunnington" to extend to NHM-EX and WSM-EX, to prevent these immediate returns from MWAIT, reducing idle power on these platforms. While only acpi_idle ran on Dunnington, intel_idle may also run on these two newer systems. As of today, there are no other models that are known to need this tweak. Link: http://lkml.kernel.org/r/CAJvTdK=%2BaNN66mYpCGgbHGCHhYQAKx-vB0kJSWjVpsNb_hOAtQ@mail.gmail.comSigned-off-by:
Len Brown <len.brown@intel.com> Link: http://lkml.kernel.org/r/baff264285f6e585df757d58b17788feabc68918.1387403066.git.len.brown@intel.comSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Suman Anna authored
commit 6d4c8830 upstream. Commit 7d7e1eba (ARM: OMAP2+: Prepare for irqs.h removal) and commit ec2c0825 (ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ) updated the way interrupts for OMAP2/3 devices are defined in the HWMOD data structures to being an index plus a fixed offset (defined by OMAP_INTC_START). Couple of irqs in the OMAP2/3 hwmod data were misconfigured completely as they were missing this OMAP_INTC_START relative offset. Add this offset back to fix the incorrect irq data for the following modules: OMAP2 - GPMC, RNG OMAP3 - GPMC, ISP MMU & IVA MMU Signed-off-by:
Suman Anna <s-anna@ti.com> Fixes: 7d7e1eba ("ARM: OMAP2+: Prepare for irqs.h removal") Fixes: ec2c0825 ("ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ") Cc: Tony Lindgren <tony@atomide.com> Signed-off-by:
Paul Walmsley <paul@pwsan.com> Signed-off-by:
-
Catalin Marinas authored
commit 4ecf7ccb upstream. An exclusive store instruction may fail for reasons other than lock contention (e.g. a cache eviction during the critical section) so, in line with other architectures using similar exclusive instructions (alpha, mips, powerpc), retry the trylock operation if the lock appears to be free but the strex reported failure. Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Tony Thompson <anthony.thompson@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by:
-
Will Deacon authored
commit cdc27c27 upstream. Commit 8f34a1da ("arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints") fixed an issue with GDB trying to zero breakpoint control registers. The problem there is that the arch hw_breakpoint code will attempt to create a (disabled), execute breakpoint of length 0. This will fail validation and report unexpected failure to GDB. To avoid this, we treated disabled breakpoints as HW_BREAKPOINT_EMPTY, but that seems to have broken with recent kernels, causing watchpoints to be treated as TYPE_INST in the core code and returning ENOSPC for any further breakpoints. This patch fixes the problem by prioritising the `enable' field of the breakpoint: if it is cleared, we simply update the perf_event_attr to indicate that the thing is disabled and don't bother changing either the type or the length. This reinforces the behaviour that the breakpoint control register is essentially read-only apart from the enable bit when disabling a breakpoint. Reported-by:
Aaron Liu <liucy214@gmail.com> Signed-off-by:
-
Miao Xie authored
commit c4602c1c upstream. Ftrace currently initializes only the online CPUs. This implementation has two problems: - If we online a CPU after we enable the function profile, and then run the test, we will lose the trace information on that CPU. Steps to reproduce: # echo 0 > /sys/devices/system/cpu/cpu1/online # cd <debugfs>/tracing/ # echo <some function name> >> set_ftrace_filter # echo 1 > function_profile_enabled # echo 1 > /sys/devices/system/cpu/cpu1/online # run test - If we offline a CPU before we enable the function profile, we will not clear the trace information when we enable the function profile. It will trouble the users. Steps to reproduce: # cd <debugfs>/tracing/ # echo <some function name> >> set_ftrace_filter # echo 1 > function_profile_enabled # run test # cat trace_stat/function* # echo 0 > /sys/devices/system/cpu/cpu1/online # echo 0 > function_profile_enabled # echo 1 > function_profile_enabled # cat trace_stat/function* # run test # cat trace_stat/function* So it is better that we initialize the ftrace profiler for each possible cpu every time we enable the function profile instead of just the online ones. Link: http://lkml.kernel.org/r/1387178401-10619-1-git-send-email-miaox@cn.fujitsu.comSigned-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 95cadace upstream. This patch allows FILEIO to update hw_max_sectors based on the current max_bytes_per_io. This is required because vfs_[writev,readv]() can accept a maximum of 2048 iovecs per call, so the enforced hw_max_sectors really needs to be calculated based on block_size. This addresses a >= v3.5 bug where block_size=512 was rejecting > 1M sized I/O requests, because FD_MAX_SECTORS was hardcoded to 2048 for the block_size=4096 case. (v2: Use max_bytes_per_io instead of ->update_hw_max_sectors) Reported-by:
Henrik Goldman <hg@x-formation.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 4454b66c upstream. This patch changes special case handling for ISCSI_OP_SCSI_CMD where an initiator sends a zero length Expected Data Transfer Length (EDTL), but still sets the WRITE and/or READ flag bits when no payload transfer is requested. Many, many moons ago two special cases where added for an ancient version of ESX that has long since been fixed, so instead of adding a new special case for the reported bug with a Broadcom 57800 NIC, go ahead and always strip off the incorrect WRITE + READ flag bits. Also, avoid sending a reject here, as RFC-3720 does mandate this case be handled without protocol error. Reported-by:
Witold Bazakbal <865perl@wp.pl> Tested-by:
-
Wei Yongjun authored
commit 94a71110 upstream. Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Oleg Nesterov authored
commit c0c14395 upstream. selinux_setprocattr() does ptrace_parent(p) under task_lock(p), but task_struct->alloc_lock doesn't pin ->parent or ->ptrace, this looks confusing and triggers the "suspicious RCU usage" warning because ptrace_parent() does rcu_dereference_check(). And in theory this is wrong, spin_lock()->preempt_disable() doesn't necessarily imply rcu_read_lock() we need to access the ->parent. Reported-by:
Evan McNabb <emcnabb@redhat.com> Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
Chad Hanson authored
commit 46d01d63 upstream. Fix a broken networking check. Return an error if peer recv fails. If secmark is active and the packet recv succeeds the peer recv error is ignored. Signed-off-by:
Chad Hanson <chanson@trustedcs.com> Signed-off-by:
-
Bjørn Mork authored
commit 4144bc86 upstream. Reported-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Acked-by:
-
Marc Kleine-Budde authored
commit 20fb4eb9 upstream. This patch fixes a memory leak in pcan_usb_pro_init(). In patch f14e2243 net: can: peak_usb: Do not do dma on the stack the struct pcan_usb_pro_fwinfo *fi and struct pcan_usb_pro_blinfo *bi were converted from stack to dynamic allocation va kmalloc(). However the corresponding kfree() was not introduced. This patch adds the missing kfree(). Reported-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Dmitry Kunilov authored
commit 52d0dc75 upstream. ZTE AC2726 EVDO modem drops ppp connection every minute when driven by zte_ev but works fine when driven by option. Move the support for AC2726 back to option driver. Signed-off-by:
Dmitry Kunilov <dmitry.kunilov@gmail.com> Signed-off-by:
-
Mika Westerberg authored
commit d24c195f upstream. Newer Intel PCHs with LPSS have the same Designware controllers than Haswell but ACPI IDs are different. Add these IDs to the driver list. Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Jonathan Cameron authored
commit e39d9905 upstream. Note this also sets the endianness to big endian whereas it would previously have defaulted to the cpu endian. Hence technically this is a bug fix on LE platforms. Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Jonathan Cameron authored
commit 3425c0f7 upstream. A single channel in this driver was using the IIO_ST macro. This does not provide a parameter for setting the endianness of the channel. Thus this channel will have been reported as whatever is the native endianness of the cpu rather than big endian. This means it would be incorrect on little endian platforms. Signed-off-by:
-
David Henningsson authored
commit 693e0cb0 upstream. While enabling these machines, we found we would sometimes lose an interrupt if we change hardware volume during playback, and that disabling msi fixed this issue. (Losing the interrupt caused underruns and crackling audio, as the one second timeout is usually bigger than the period size.) The machines were all machines from HP, running AMD Hudson controller, and Realtek ALC282 codec. BugLink: https://bugs.launchpad.net/bugs/1260225Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
JongHo Kim authored
commit ed697e1a upstream. When the process is sleeping at the SNDRV_PCM_STATE_PAUSED state from the wait_for_avail function, the sleep process will be woken by timeout(10 seconds). Even if the sleep process wake up by timeout, by this patch, the process will continue with sleep and wait for the other state. Signed-off-by:
JongHo Kim <furmuwon@gmail.com> Signed-off-by:
-
Charles Keepax authored
commit 280484e7 upstream. Reported-by:
Kyung-Kwee Ryu <kyung-kwee.ryu@wolfsonmicro.com> Signed-off-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by:
Mark Brown <broonie@linaro.org> Signed-off-by:
-
Charles Keepax authored
commit 939fd1e8 upstream. Some devices are getting very close to the limit whilst polling the RAM start, this patch adds a small delay to this loop to give a longer startup timeout. Signed-off-by:
-
Bo Shen authored
commit f0199bc5 upstream. When wm8904 work in DSP mode B, we still need to configure it to work in DSP mode. Or else, it will work in Right Justified mode. Signed-off-by:
Bo Shen <voice.shen@atmel.com> Acked-by:
-
Stephen Warren authored
commit 241bf433 upstream. In tegra*_i2s_set_fmt(), in the (fmt == SND_SOC_DAIFMT_CBM_CFM) case, "val" is never assigned to, but left uninitialized. The other case does initialized it. Fix this by initializing val at the start of the function, and only ever ORing into it. Update the handling of "mask" so it works the same way for consistency. Update tegra20_spdif.c to use the same code-style for consistency, even though it doesn't happen to suffer from the same problem at present. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Reviewed-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Ian Abbott authored
commit 0283f7a1 upstream. At some point, Measurement Computing / ComputerBoards redesigned the PCI-DIO48H to use a PLX PCI interface chip instead of an AMCC chip. This meant they had to put their hardware registers in the PCI BAR 2 region instead of PCI BAR 1. Unfortunately, they kept the same PCI device ID for the new design. This means the driver recognizes the newer cards, but doesn't work (and is likely to screw up the local configuration registers of the PLX chip) because it's using the wrong region. Since the PCI subvendor and subdevice IDs were both zero on the old design, but are the same as the vendor and device on the new design, we can tell the old design and new design apart easily enough. Split the existing entry for the PCI-DIO48H in `pci_8255_boards[]` into two new entries, referenced by different entries in the PCI device ID table `pci_8255_pci_table[]`. Use the same board name for both entries. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Acked-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit dc1dc2f8 upstream. When booting a multi-platform m68k kernel on a non-Mac with "console=ttyS0" on the kernel command line, it crashes with: Unable to handle kernel NULL pointer dereference at virtual address (null) Oops: 00000000 PC: [<0013ad28>] __pmz_startup+0x32/0x2a0 ... Call Trace: [<002c5d3e>] pmz_console_setup+0x64/0xe4 The normal tty driver doesn't crash, because init_pmz() checks pmz_ports_count again after calling pmz_probe(). In the serial console initialization path, pmz_console_init() doesn't do this, causing the driver to crash later. Add a check for pmz_ports_count to fix this. Signed-off-by:
-
pingfan liu authored
commit 91648ec0 upstream. Since kvmppc_hv_find_lock_hpte() is called from both virtmode and realmode, so it can trigger the deadlock. Suppose the following scene: Two physical cpuM, cpuN, two VM instances A, B, each VM has a group of vcpus. If on cpuM, vcpu_A_1 holds bitlock X (HPTE_V_HVLOCK), then is switched out, and on cpuN, vcpu_A_2 try to lock X in realmode, then cpuN will be caught in realmode for a long time. What makes things even worse if the following happens, On cpuM, bitlockX is hold, on cpuN, Y is hold. vcpu_B_2 try to lock Y on cpuM in realmode vcpu_A_2 try to lock X on cpuN in realmode Oops! deadlock happens Signed-off-by:
Liu Ping Fan <pingfank@linux.vnet.ibm.com> Reviewed-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Alexander Graf <agraf@suse.de> Signed-off-by:
-
Yan, Zheng authored
commit fc55d2c9 upstream. We also need to wake up 'safe' waiters if error occurs or request aborted. Otherwise sync(2)/fsync(2) may hang forever. Signed-off-by:
Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by:
Sage Weil <sage@inktank.com> Signed-off-by:
-
Yan, Zheng authored
commit eb1b8af3 upstream. Aborted requests usually get cleared when the reply is received. If MDS crashes, no reply will be received. So we need to cleanup aborted requests when re-sending requests. Signed-off-by:
Greg Farnum <greg@inktank.com> Signed-off-by:
-
Johan Hovold authored
commit 6f648546 upstream. Fix race in generic write implementation, which could lead to temporarily degraded throughput. The current generic write implementation introduced by commit 27c7acf2 ("USB: serial: reimplement generic fifo-based writes") has always had this bug, although it's fairly hard to trigger and the consequences are not likely to be noticed. Specifically, a write() on one CPU while the completion handler is running on another could result in only one of the two write urbs being utilised to empty the remainder of the write fifo (unless there is a second write() that doesn't race during that time). Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
-
- 20 Dec, 2013 8 commits
-
-
Greg Kroah-Hartman authored
-
Roger Quadros authored
commit 313a76ee upstream. In _ocp_softreset(), after _set_softreset() + write_sysconfig(), the hwmod's sysc_cache will always contain SOFTRESET bit set so all further writes to sysconfig using this cache will initiate a repeated SOFTRESET e.g. enable_sysc(). This is true for OMAP3 like platforms that have RESET_DONE status in the SYSSTATUS register and so the the SOFTRESET bit in SYSCONFIG is not automatically cleared. It is not a problem for OMAP4 like platforms that indicate RESET completion by clearing the SOFTRESET bit in the SYSCONFIG register. This repeated SOFTRESET is undesired and was the root cause of USB host issues on OMAP3 platforms when hwmod was allowed to do the SOFTRESET for the USB Host module. To fix this we clear the SOFTRESET bit and update the sysconfig register + sysc_cache using write_sysconfig(). Signed-off-by:
Roger Quadros <rogerq@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> # Panda, BeagleXM [paul@pwsan.com: renamed _clr_softreset() to _clear_softreset()] Signed-off-by:
-
Liu Bo authored
commit 6f519564 upstream. If something wrong happens in write endio, running snapshot-aware defragment can end up with undefined results, maybe a crash, so we should avoid it. In order to share similar code, this also adds a helper to free the struct for snapshot-aware defrag. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
-
Filipe David Borba Manana authored
commit 8185554d upstream. When a directory has a default ACL and a subdirectory is created under that directory, btrfs_init_acl() is called when the subdirectory's inode is created to initialize the inode's ACL (inherited from the parent directory) but it was clearing the ACL from the inode after setting it if posix_acl_create() returned success, instead of clearing it only if it returned an error. To reproduce this issue: $ mkfs.btrfs -f /dev/loop0 $ mount /dev/loop0 /mnt $ mkdir /mnt/acl $ setfacl -d --set u::rwx,g::rwx,o::- /mnt/acl $ getfacl /mnt/acl user::rwx group::rwx other::r-x default:user::rwx default:group::rwx default:other::--- $ mkdir /mnt/acl/dir1 $ getfacl /mnt/acl/dir1 user::rwx group::rwx other::--- After unmounting and mounting again the filesystem, fgetacl returned the expected ACL: $ umount /mnt/acl $ mount /dev/loop0 /mnt $ getfacl /mnt/acl/dir1 user::rwx group::rwx other::--- default:user::rwx default:group::rwx default:other::--- Meaning that the underlying xattr was persisted. Reported-by:
Giuseppe Fierro <giuseppe@fierro.org> Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
-
Josef Bacik authored
commit ed9e8af8 upstream. I added an assert to make sure we were looking up aligned offsets for csums and I tripped it when running xfstests. This is because log_one_extent was checking if block_start == 0 for a hole instead of EXTENT_MAP_HOLE. This worked out fine in practice it seems, but it adds a lot of extra work that is uneeded. With this fix I'm no longer tripping my assert. Thanks, Signed-off-by:
-
Liu Bo authored
commit 7d3d1744 upstream. As we're hold a ref on looking up the extent map, we need to drop the ref before returning to callers. Signed-off-by:
-
Greg Kroah-Hartman authored
It turns out that commit: d3f7d56a was applied to the tree twice, which didn't hurt anything, but it's good to fix this up. Reported-by:
Veaceslav Falico <veaceslav@falico.eu> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Shawn Landden <shawnlandden@gmail.com> Cc: Tom Herbert <therbert@google.com> Signed-off-by:
-
Nicolas Dichtel authored
The upstream commit bb814094 ("ip6tnl: allow to use rtnl ops on fb tunnel") (backported into linux-3.10.y) left a bug which was fixed upstream by commit 1e9f3d6f ("ip6tnl: fix use after free of fb_tnl_dev"). The problem is a bit different in linux-3.10.y, because there is no x-netns support (upstream commit 0bd87628 ("ip6tnl: add x-netns support")). When ip6_tunnel.ko is unloaded, FB device is deleted by rtnl_link_unregister() and then we try to delete it again in ip6_tnl_destroy_tunnels(). This patch removes the second deletion. Reported-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
