- 30 May, 2013 5 commits
-
-
Manish Chopra authored
o Adapters do not support co-existence of INTx Interrupt with MSI-X or MSI among multiple functions. Prevent attaching of a function during normal load, if adapter gets into mixed mode of interrupts Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
Signed-off-by:
-
Manish Chopra authored
o log "Unknown" board name and "Unknown" serial number in case of mismatched adapter type found. This will avoid weird characters logs when an adapter is in bad state or corrupted. Signed-off-by:
-
Manish Chopra authored
Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - reduce broadcast overhead on non-lossy wired links - fix typos in kernel doc - use eth_hdr() when possible - use netdev_allock_skb_ip_align() and don't deal with NET_IP_ALIGN - change VID semantic in the BLA component - other minor cleanups and code refactoring Signed-off-by:
-
- 29 May, 2013 35 commits
-
-
Andy Shevchenko authored
Instead of dereferencing pointer and put values on stack we could use nice %*phC specifier. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Veaceslav Falico authored
Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Veaceslav Falico authored
After b924551b ("bonding: fix enslaving in alb mode when link down") we don't need the bond parameter in alb_swap_mac_addr(), so remove it. Signed-off-by:
-
Cong Wang authored
When vxlan is compiled as builtin, its init code runs before IPv6 init, this could cause problems if we create IPv6 socket in the latter patch. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Cong Wang <amwang@redhat.com> Signed-off-by:
-
Cong Wang authored
'unsigned int' is slightly better. Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Cong Wang authored
Cc: Stephen Hemminger <stephen@networkplumber.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Simon Horman authored
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer however skb->network_header is now an offset. This patch corrects the problem by adding a wrapper to return skb tail as an offset regardless of the value of NET_SKBUFF_DATA_USES_OFFSET. It seems that skb->tail that this offset may be more than 64k and some care has been taken to treat such cases as an error. Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Simon Horman authored
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case sk_buff_data_t will be a pointer, however, skb->{network,transport}_header is now __u16. Signed-off-by: -
Simon Horman authored
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by:
-
Simon Horman authored
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by:
-
Simon Horman authored
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by:
-
Simon Horman authored
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that comparisons and calculations are always made using pointers. Signed-off-by:
-
Simon Horman authored
This corrects an regression introduced by "net: Use 16bits for *_headers fields of struct skbuff" when NET_SKBUFF_DATA_USES_OFFSET is not set. In that case skb->tail will be a pointer whereas skb->transport_header will be an offset from head. This is corrected by using wrappers that ensure that the comparison is always between pointers. Signed-off-by:
-
Cong Wang authored
commit 351638e7 (net: pass info struct via netdevice notifier) breaks booting of my KVM guest, this is due to we still forget to pass struct netdev_notifier_info in several places. This patch completes it. Cc: Jiri Pirko <jiri@resnulli.us> Cc: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Simon Wunderlich authored
Signed-off-by:
Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by:
Antonio Quartulli <ordex@autistici.org>
-
Martin Hundebøll authored
The call to batadv_nc_skb_forward() fits better in batadv_send_skb_to_orig(), as this is where the actual next hop is looked up. To let the caller of batadv_send_skb_to_orig() know wether the skb is transmitted, buffered or failed, the return value is changed from boolean to int. Signed-off-by:
Martin Hundebøll <martin@hundeboll.net> Signed-off-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
-
Antonio Quartulli authored
Since the MSB bits of any vid variable are now used for storing flags, print the vid properly by taking the flags away and printing -1 in case of VID representing no real VLAN. Signed-off-by:
Antonio Quartulli <antonio@open-mesh.com> Signed-off-by:
-
Antonio Quartulli authored
In order to make batman-adv fully vlan aware later, the semantic used for variables storing the VLAN ID values has to be changed in order to be adapted to the new one which will be used batman-adv wide. In particular, the VID has to be an "_unsigned_ short int" and its 4 MSB will be used as a flag bitfield, while the remaining 12 bits are used to store the real VID value Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Linus Lüssing authored
There's no need to for an explicit hlist_node initialization if it is added to a list right away, like it's the case with the hlist_add_head()s here. Signed-off-by:
Linus Lüssing <linus.luessing@web.de> Signed-off-by:
-
Antonio Quartulli authored
it may be the case that we want to store some local TT client flags in a global entry, therefore the tt_global_add needs to get a proper argument for this Signed-off-by:
-
Antonio Quartulli authored
Instead of dealing with NET_IP_ALIGN during allocation and headroom reservation, it is possible to use netdev_alloc_skb_ip_align() which transparently allocate and reserve the correct amount of data Signed-off-by:
-
Antonio Quartulli authored
Instead of passing a generic combination of flags as argument, it is easier to pass the entire tt_common structure (containing the flags already set) plus a bitfield of event flags that will be unified with the already existing ones before inserting the client in the event queue. In this way invocations of the modified function can be simplified. Signed-off-by:
-
Antonio Quartulli authored
batadv_slide_own_bcast_window() is used only in bat_iv_ogm.c and it is currently touching only batman_iv specific attributes. Move it into bat_iv_ogm.c and make it static. Signed-off-by:
-
Antonio Quartulli authored
the two lonely ring_buffer helper functions are used by the bat_iv_ogm module only and therefore they can be moved inside it. Reported-by:
-
Antonio Quartulli authored
Instead of casting the result of skb_mac_header() to "struct ethhdr *" every time, the eth_hdr inline function can be use to beautify the code and improve its readability. Signed-off-by:
-
Antonio Quartulli authored
hard-interface.c has to do not contain any routing algorithm specific code. Allocate the hard-interface with kzalloc() and remove any useless and algorithm specific member initialisation Signed-off-by:
-
Antonio Quartulli authored
Only one neigh_node per orig_node should match a given neighbor address, therefore, if more than one matching neigh_node is found, a WARNING has to be triggered to let the user know that something is wrong in the originator state instead of silently skipping the error. Signed-off-by:
-
Antonio Quartulli authored
Compatibility version is checked upon packet reception before calling any handler. For this reason it does need to be checked once more in the handler itself. Signed-off-by:
-
Antonio Quartulli authored
The source address has already been checked in batadv_check_management_packet() upon packet reception and therefore it does not need to be checked again in ogm_process() Signed-off-by:
-
Antonio Quartulli authored
print the interface along with the new neighbor mac address Signed-off-by:
-
Antonio Quartulli authored
the sequence number is not stored in struct neigh_node, therefore there is no need to pass such value to the neigh_node creation procedure. At the moment the value is only used by a debug message, but given the fact that the seqno is not related to the neighbor object, it is better to print it elsewhere. Signed-off-by:
-
Marek Lindner authored
Signed-off-by:
-
Matthias Schiffer authored
While it makes sense to send each broadcast thrice on 802.11 (WLAN) interfaces as broadcasts are often unreliable on these, there is no reason to do so on other interface types. The increased the overhead can be harmful on low-bandwidth links like VPN connections over slow internet lines, therefore it is better to reduce the number of broadcast packets sent on non-wireless links to one. Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by:
-
Matthias Schiffer authored
Previously batadv_is_wifi_iface() did two things at once: looking up a net_device from an interface index, and determining if it is a wifi device. The second part is useful itself when the caller already has a net_device reference. Signed-off-by:
-
