- 16 Feb, 2018 40 commits
-
-
Thomas Richter authored
On s390 perf can be executed on a LPAR with support for hardware events (i. e. cycles) or on a z/VM or KVM guest where no hardware events are supported. In this environment use software event named cpu-clock for this test case. Use the cpuid infrastructure functions to determine the cpuid on s390 which contains an indication of the cpu counter facility availability. Signed-off-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Reviewed-by:
Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180213151419.80737-4-tmricht@linux.vnet.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Thomas Richter authored
The function get_cpuid_str() is called by perf_pmu__getcpuid() and on s390 returns a complete description of the CPU and its capabilities, which is a comma separated list. To map the CPU type with the value defined in the pmu-events/arch/s390/mapfile.csv, introduce an architecture specific cpuid compare function named strcmp_cpuid_str() The currently used regex algorithm is defined as the weak default and will be used if no platform specific one is defined. This matches the current behavior. Signed-off-by:
-
Thomas Richter authored
Scan the cpuid string and extract the type number for later use. Signed-off-by:
-
Thomas Richter authored
When perf record ... is setup to record data, the s390 cpu information was a fixed string "IBM/S390". Replace this string with one containing more information about the machine. The information included in the cpuid is a comma separated list: manufacturer,type,model-capacity,model[,version,authorization] with - manufacturer: up to 16 byte name of the manufacturer (IBM). - type: a four digit number refering to the machine generation. - model-capacitiy: up to 16 characters describing number of cpus etc. - model: up to 16 characters describing model. - version: the CPU-MF counter facility version number, available on LPARs only, omitted on z/VM guests. - authorization: the CPU-MF counter facility authorization level, available on LPARs only, omitted on z/VM guests. Before: [root@s8360047 perf]# ./perf record -- sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.001 MB perf.data (4 samples) ] [root@s8360047 perf]# ./perf report --header | fgrep cpuid # cpuid : IBM/S390 [root@s8360047 perf]# After: [root@s35lp76 perf]# ./perf report --header|fgrep cpuid # cpuid : IBM,3906,704,M03,3.5,002f [root@s35lp76 perf]# Signed-off-by:
-
Ravi Bangoria authored
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. It also enables users to specify wildcards, for example, perf trace -e 'open*', just like was already possible on x86 and s390. Signed-off-by:
Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.vnet.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/20180129083417.31240-4-ravi.bangoria@linux.vnet.ibm.com [ Do it for ppc32 as well ] Signed-off-by:
-
Ravi Bangoria authored
This should speed up accessing new system calls introduced with the kernel rather than waiting for libaudit updates to include them. Signed-off-by:
-
Ravi Bangoria authored
Will be used for generating the syscall id/string translation table. Committer notes: Update it already to catch with these csets applied since Ravi first submitted this patch: 3350eb2e powerpc: sys_pkey_mprotect() system call 9499ec1b powerpc: sys_pkey_alloc() and sys_pkey_free() system calls So now 'perf trace' on ppc now knows about the pkey_ syscals. Signed-off-by:
-
Jiri Olsa authored
Jin Yao reported memory corrupton in perf report with branch info used for stack trace: > Following command lines will cause perf crash. > perf record -j call -g -a <application> > perf report --branch-history > > *** Error in `perf': double free or corruption (!prev): 0x00000000104aa040 *** > ======= Backtrace: ========= > /lib/x86_64-linux-gnu/libc.so.6(+0x77725)[0x7f6b37254725] > /lib/x86_64-linux-gnu/libc.so.6(+0x7ff4a)[0x7f6b3725cf4a] > /lib/x86_64-linux-gnu/libc.so.6(cfree+0x4c)[0x7f6b37260abc] > perf[0x51b914] > perf(hist_entry_iter__add+0x1e5)[0x51f305] > perf[0x43cf01] > perf[0x4fa3bf] > perf[0x4fa923] > perf[0x4fd396] > perf[0x4f9614] > perf(perf_session__process_events+0x89e)[0x4fc38e] > perf(cmd_report+0x15d2)[0x43f202] > perf[0x4a059f] > perf(main+0x631)[0x427b71] > /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf0)[0x7f6b371fd830] > perf(_start+0x29)[0x427d89] For the cumulative output, we allocate the he_cache array based on the --max-stack option value and populate it with data from 'callchain_cursor'. The --max-stack option value does not ensure now the limit for number of callchain_cursor nodes, so the cumulative iter code will allocate smaller array than it's actually needed and cause above corruption. I think the --max-stack limit does not apply here anyway, because we add callchain data as normal hist entries, while the --max-stack control the limit of single entry callchain depth. Using the callchain_cursor.nr as he_cache array count to fix this. Also removing struct hist_entry_iter::max_stack, because there's no longer any use for it. We need more fixes to ensure that the branch stack code follows properly the logic of --max-stack, which is not the case at the moment. Original-patch-by:
Jin Yao <yao.jin@linux.intel.com> Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Reported-by:
-
Jin Yao authored
When we use perf report interactive annotate view, we can see the position of jump arrow is not correct. For example, 1. perf record -b ... 2. perf report 3. In interactive mode, select Annotate 'function' Percent│ IPC Cycle │ if (flag) 1.37 │0.4┌── 1 ↓ je 82 │ │ x += x / y + y / x; 0.00 │0.4│ 1310 movsd (%rsp),%xmm0 0.00 │0.4│ 565 movsd 0x8(%rsp),%xmm4 │0.4│ movsd 0x8(%rsp),%xmm1 │0.4│ movsd (%rsp),%xmm3 │0.4│ divsd %xmm4,%xmm0 0.00 │0.4│ 579 divsd %xmm3,%xmm1 │0.4│ movsd (%rsp),%xmm2 │0.4│ addsd %xmm1,%xmm0 │0.4│ addsd %xmm2,%xmm0 0.00 │0.4│ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.4└─→ 82: sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 The jump arrow in above example is not correct. It should add the width of IPC and Cycle. With this patch, the result is: Percent│ IPC Cycle │ if (flag) 1.37 │0.48 1 ┌──je 82 │ │ x += x / y + y / x; 0.00 │0.48 1310 │ movsd (%rsp),%xmm0 0.00 │0.48 565 │ movsd 0x8(%rsp),%xmm4 │0.48 │ movsd 0x8(%rsp),%xmm1 │0.48 │ movsd (%rsp),%xmm3 │0.48 │ divsd %xmm4,%xmm0 0.00 │0.48 579 │ divsd %xmm3,%xmm1 │0.48 │ movsd (%rsp),%xmm2 │0.48 │ addsd %xmm1,%xmm0 │0.48 │ addsd %xmm2,%xmm0 0.00 │0.48 │ movsd %xmm0,(%rsp) │ │ volatile double x = 1212121212, y = 121212; │ │ │ │ s_randseed = time(0); │ │ srand(s_randseed); │ │ │ │ for (i = 0; i < 2000000000; i++) { 1.37 │0.48 82:└─→sub $0x1,%ebx 28.21 │0.48 17 ↑ jne 38 Committer notes: Please note that only from LBRv5 (according to Jiri) onwards, i.e. >= Skylake is that we'll have the cycles counts in each branch record entry, so to see the Cycles and IPC columns, and be able to test this patch, one need a capable hardware. While applying this I first tested it on a Broadwell class machine and couldn't get those columns, will add code to the annotate browser to warn the user about that, i.e. you have branch records, but no cycles, use a more recent hardware to get the cycles and IPC columns. Signed-off-by: -
Andi Kleen authored
The "mem-loads" event only works when PEBS is enabled, so add the "/p" ("precise") suffix to the examples. Signed-off-by:Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> LPU-Reference: 20180209163909.9240-1-andi@firstfloor.org Link: https://lkml.kernel.org/n/tip-v0gcd4u9tktrvjjsp6y7ouv4@git.kernel.orgSigned-off-by:
-
Robert Walker authored
Add notes on using perf to collect and analyze CoreSight trace Signed-off-by:
Robert Walker <robert.walker@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1518607481-4059-4-git-send-email-robert.walker@arm.comSigned-off-by:
-
Robert Walker authored
There may be discontinuities in the ETM trace stream due to overflows or ETM configuration for selective trace. This patch emits an instruction sample with the pending branch stack when a TRACE ON packet occurs indicating a discontinuity in the trace data. A new packet type CS_ETM_TRACE_ON is added, which is emitted by the low level decoder when a TRACE ON occurs. The higher level decoder flushes the branch stack when this packet is emitted. Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1518607481-4059-3-git-send-email-robert.walker@arm.comSigned-off-by:
-
Robert Walker authored
Added user space perf functionality to translate CoreSight traces into instruction events with branch stack. To invoke the new functionality, use the perf inject tool with --itrace=il. For example, to translate the ETM trace from perf.data into last branch records in a new inj.data file: $ perf inject --itrace=i100000il128 -i perf.data -o perf.data.new The 'i' parameter to itrace generates periodic instruction events. The period between instruction events can be specified as a number of instructions suffixed by i (default 100000). The parameter to 'l' specifies the number of entries in the branch stack attached to instruction events. The 'b' parameter to itrace generates events on taken branches. This patch also fixes the contents of the branch events used in perf report - previously branch events were generated for each contiguous range of instructions executed. These are fixed to generate branch events between the last address of a range ending in an executed branch instruction and the start address of the next range. Based on patches by Sebastian Pop <s.pop@samsung.com> with additional fixes and support for specifying the instruction period. Originally-by:Sebastian Pop <s.pop@samsung.com> Signed-off-by:
-
Sangwon Hong authored
Add the missing --force option on the man page. Signed-off-by:
Sangwon Hong <qpakzk@gmail.com> Acked-by:
Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1518381517-30766-2-git-send-email-qpakzk@gmail.comSigned-off-by:
-
Sangwon Hong authored
First, 'perf kmem' has a '--force' option, but didn't document it on the man page. So add it. Second, the '--time' option has to get a value, but isn't documented on the man page. Describe it. Signed-off-by:
-
Jaecheol Shin authored
Some options must require an argument. But input, stdio-color, cpu have no them. So I added it. Signed-off-by:
Jaecheol Shin <jcgod413@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/20180207095205.62715-1-jcgod413@gmail.comSigned-off-by:
-
Mathieu Poirier authored
This patch allows the CoreSight AUX info section to fit topologies where only a subset of all available CPUs are present, avoiding at the same time accessing the ETM configuration areas of CPUs that have been offlined. Signed-off-by:
-
Mathieu Poirier authored
When working natively on arm64 the compiler gets pesky and complains that variable 'i' is uninitialised, something that breaks the compilation. Here no further checks are needed since variable 'found_spe' can only be true if variable 'i' has been initialised as part of the for loop. Signed-off-by:
-
Jin Yao authored
Mathieu Poirier reports issue in commit ("73c0ca1e perf thread_map: Enumerate all threads from /proc") that it has negative impact on 'perf record --per-thread'. It has the effect of creating a kernel event for each thread in the system for 'perf record --per-thread'. Mathieu Poirier's patch ("perf util: Do not reuse target->per_thread flag") can fix this issue by creating a new target->all_threads flag. This patch is based on Mathieu Poirier's patch but it doesn't use a new target->all_threads flag. This patch just uses 'target->per_thread && target->system_wide' as a condition to check for all threads case. Signed-off-by: -
Mathieu Poirier authored
This patch frees all the memory allocated in function cs_etm__alloc_queue(). Signed-off-by:
-
Jiri Olsa authored
The symbol search called by machine__find_kernel_symbol_by_name is using internally arch__compare_symbol_names function to compare 2 symbol names, because different archs have different ways of comparing symbols. Mostly for skipping '.' prefixes and similar. In test 1 when we try to find matching symbols in kallsyms and vmlinux, by address and by symbol name. When either is found we compare the pair symbol names by simple strcmp, which is not good enough for reasons explained in previous paragraph. On powerpc this can cause lockup, because even thought we found the pair, the compared names are different and don't match simple strcmp. Following code path is executed, that leads to lockup: - we find the pair in kallsyms by sym->start next_pair: - we compare the names and it fails - we find the pair by sym->name - the pair addresses match so we call goto next_pair because we assume the names match in this case Signed-off-by:Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
-
Jiri Olsa authored
There's no need for kernel maps to be allocated at this point - sample processing. We search for kernel maps using the kernel map_groups in machine::kmaps which is static. If vmlinux maps for any reason still don't exist, the search correctly fails because they are not in the map group. Signed-off-by:
-
Jiri Olsa authored
The current machine__load_kallsyms() function has no caller, so replace it directly with __machine__load_kallsyms(). Also remove the no_kcore argument as it was always called with a 'true' value. Signed-off-by:
-
Jiri Olsa authored
We should not search for the kernel start address in __machine__create_kernel_maps(), because it's being used in the 'report' code path, where we are interested in kernel MMAP data address (the one recorded via 'perf record', possibly on another machine, or an older or newer kernel on the same machine where analysis is being performed) instead of in current kernel address. The __machine__create_kernel_maps() function serves purely for creating the machines kernel maps and setting up the kmap group. The report code path then sets the address based on the data from kernel MMAP event in the machine__set_kernel_mmap() function. The kallsyms search address logic is used for test code, that calls machine__create_kernel_maps() to get current maps and calls machine__get_running_kernel_start() to get kernel starting address. Use machine__set_kernel_mmap() to set the kernel maps start address and moving map_groups__fixup_end to be call when all maps are in place. Also make __machine__create_kernel_maps static, because there's no external user. Signed-off-by:
-
Jiri Olsa authored
So it could be called without event object, just with start and end values. It will be used in following patch. Signed-off-by:
-
Jiri Olsa authored
It simplifies and centralizes the code. The kernel mmap name is set for machine type, which we know from the beginning, so there's no reason to generate it every time we need it. Signed-off-by:
-
Jiri Olsa authored
Free root_dir in machine__init() error path. Signed-off-by:
-
Jiri Olsa authored
The current code in dso__load() calls is_regular_file(), but it checks its return value only after calling symsrc__init(). That can make symsrc__init() block in elf_* functions on reading the file if the file happens to be device and not regular one. Call symsrc__init() only for regular files. Also remove the symsrc__destroy() cleanup, which is not needed now, because we call symsrc__init() only for regular files. Signed-off-by:
-
Jiri Olsa authored
Adding check on failed attempt to parse the address and skip the line parsing early in that case. The address can be replaced with '(null)' string in case user don't have enough permissions, like: $ cat /proc/kallsyms (null) A irq_stack_union (null) A __per_cpu_start ... Signed-off-by: -
yuzhoujian authored
Introduce a new option to print counts after N milliseconds and update 'perf stat' documentation accordingly. Show below is the output of the new option for perf stat. $ perf stat --time 2000 -e cycles -a Performance counter stats for 'system wide': 157,260,423 cycles 2.003060766 seconds time elapsed We can print the count deltas after N milliseconds with this new introduced option. This option is not supported with "-I" option. In addition, according to Kangliang's patch(19afd104), the monitoring overhead for system-wide core event could be very high if the interval-print parameter was below 100ms, and the limitation value is 10ms. So the same warning will be displayed when the time is set between 10ms to 100ms, and the minimal time is limited to 10ms. Users can make a decision according to their spcific cases. Committer notes: This actually stops the workload after the specified time, then prints the counts. So I renamed the option to --timeout and updated the documentation to state that it will not just print the counts after the specified time, but will really stop the 'perf stat' session and print the counts. The rename from 'time' to 'timeout' also fixes the build in systems where 'time' is used by glibc and can't be used as a name of a variable, such as centos:5 and centos:6. Changes since v3: - none. Changes since v2: - modify the time check in __run_perf_stat func to keep some consistency with the workload case. - add the warning when the time is set between 10ms to 100ms. - add the pr_err when the time is set below 10ms. Changes since v1: - none. Signed-off-by:yuzhoujian <yuzhoujian@didichuxing.com> Acked-by:
-
yuzhoujian authored
Introduce a new option to print counts for fixed number of times and update 'perf stat' documentation accordingly. Show below is the output of the new option for perf stat. $ perf stat -I 1000 --interval-count 2 -e cycles -a # time counts unit events 1.002827089 93,884,870 cycles 2.004231506 56,573,446 cycles We can just print the counts for several times with this newly introduced option. The usage of it is a little like 'vmstat', and it should be used together with "-I" option. $ vmstat -n 1 2 procs ---------memory-------------- --swap- ----io-- -system-- ------cpu--- r b swpd free buff cache si so bi bo in cs us sy id wa st 0 0 0 78270544 547484 51732076 0 0 0 20 1 1 1 0 99 0 0 0 0 0 78270512 547484 51732080 0 0 0 16 477 1555 0 0 100 0 0 Changes since v3: - merge interval_count check and times check to one line. - fix the wrong indent in stat.h - use stat_config.times instead of 'times' in cmd_stat function. Changes since v2: - none. Changes since v1: - change the name of the new option "times-print" to "interval-count". - keep the new option interval specifically. Signed-off-by: -
Jiri Olsa authored
Add support to display group output for if non grouped events are detected and user forces --group option. Now for non-group events recorded like: $ perf record -e 'cycles,instructions' ls you can still get group output by using --group option in report: $ perf report --group --stdio ... # Overhead Command Shared Object Symbol # ................ ....... ................ ...................... # 17.67% 0.00% ls libc-2.25.so [.] _IO_do_write@@GLIB 15.59% 25.94% ls ls [.] calculate_columns 15.41% 31.35% ls libc-2.25.so [.] __strcoll_l ... Committer note: We should improve on this by making sure that the first line states that this is not a group, but since the user doesn't have to force group view when really using grouped events (e.g. '{cycles,instructions}'), the user better know what is being done... Requested-by:Stephane Eranian <eranian@google.com> Signed-off-by:
-
Jiri Olsa authored
If we have the time in, keep the events in time order. Committer notes: Trying to be more verbose, what actual effect this will have in this particular case? Before and after this patch shows the artifacts: --- /tmp/before 2018-02-06 15:40:29.536411625 -0300 +++ /tmp/after 2018-02-06 15:40:51.963403599 -0300 @@ -5,34 +5,34 @@ 2540 2540 1818 | gnome-terminal- 3489 3489 2540 | bash 32433 32433 3489 | perf - 32434 32434 32433 | perf + 32434 32434 32433 | make 32441 32441 32434 | make 32514 32514 32441 | make 511 511 32514 | sh - 512 512 511 | sh + 512 512 511 | install <SNIP> We don't have 'perf' calling 'perf' calling 'make', etc, the second 'perf' actually is 'make', i.e. there was reordering of the relevant PERF_RECORD_COMM and PERF_RECORD_FORK records. Ditto for sh/install later on. Look for FORK and COMM meta events, for those tids: # perf report -D | egrep 'PERF_RECORD_(FORK|COMM)' | egrep '3243[34]' 0 14774650990679 0x1a3cd8 [0x38]: PERF_RECORD_FORK(32433:32433):(3489:3489) 1 14774652080381 0x1d6568 [0x30]: PERF_RECORD_COMM exec: perf:32433/32433 1 14774742473340 0x1dbb48 [0x38]: PERF_RECORD_FORK(32434:32434):(32433:32433) 0 14774752005779 0x1a4af8 [0x30]: PERF_RECORD_COMM exec: make:32434/32434 0 14774753997960 0x1a5578 [0x38]: PERF_RECORD_FORK(32435:32435):(32434:32434) 0 14774756070782 0x1a5618 [0x38]: PERF_RECORD_FORK(32438:32438):(32434:32434) 0 14774757772939 0x1a5680 [0x38]: PERF_RECORD_FORK(32440:32440):(32434:32434) 0 14774758230600 0x1a56e8 [0x38]: PERF_RECORD_FORK(32441:32441):(32434:32434) # First column is the cpu, second is the timestamp. So they are on different CPUs, thus ring buffers, and when we don't use the ordered_events class, we end up mixing that up, use it to take advantage of the PERF_RECORD_FINISHED_ROUND meta events to go on ordering the events using the PERF_SAMPLE_TIME present in the PERF_RECORD_{FORK,COMM,EXIT,SAMPLE,etc} records in the ring buffer. Signed-off-by: -
Jiri Olsa authored
In commit 2f15bd8c ("perf tools: Fix "Command" sort_entry's cmp and collapse function") we switched from pointer to string comparison. But failed to remove related comments. Removing them and adding another one to warn before pointer comparison in here. Signed-off-by:
-
Jiri Olsa authored
When we strip the perf binary, dwarf unwind test stop to work. The reason is that strip will remove static function symbols, which we need to check for unwind. This change will keep this test working in cases where the global symbols are put into dynamic symbol table, which is the case on x86. It still won't work on powerpc. Making those 5 local functions global, and adding 'test_dwarf_unwind__' to their names. Committer testing: Before: # perf test dwarf 58: DWARF unwind : Ok # strip ~/bin/perf # perf test dwarf 58: DWARF unwind : FAILED! # perf test -v dwarf 58: DWARF unwind : --- start --- test child forked, pid 6590 unwind: thread map already set, dso=/home/acme/bin/perf <SNIP> unwind: access_mem addr 0x7ffce6c48098 val 48563f, offset 1144 unwind: test__dwarf_unwind:ip = 0x4a54e5 (0xa54e5) got: test__dwarf_unwind 0xa54e5, expecting test__dwarf_unwind unwind: '':ip = 0x4a50bb (0xa50bb) failed: got unresolved address 0xa50bb unwind failed test child finished with -1 ---- end ---- DWARF unwind: FAILED! # After: # perf test dwarf 58: DWARF unwind : Ok # strip ~/bin/perf # perf test dwarf 58: DWARF unwind : Ok # # perf test -v dwarf 58: DWARF unwind : --- start --- test child forked, pid 7219 unwind: thread map already set, dso=/home/acme/bin/perf <SNIP> unwind: access_mem addr 0x7fff007da2c8 val 48575f, offset 1144 unwind: test__arch_unwind_sample:ip = 0x589044 (0x189044) got: test__arch_unwind_sample 0x189044, expecting test__arch_unwind_sample unwind: test_dwarf_unwind__thread:ip = 0x4a52f7 (0xa52f7) got: test_dwarf_unwind__thread 0xa52f7, expecting test_dwarf_unwind__thread unwind: test_dwarf_unwind__compare:ip = 0x4a5468 (0xa5468) got: test_dwarf_unwind__compare 0xa5468, expecting test_dwarf_unwind__compare unwind: bsearch:ip = 0x7f6608ae94d8 (0x394d8) got: bsearch 0x394d8, expecting bsearch unwind: test_dwarf_unwind__krava_3:ip = 0x4a54d1 (0xa54d1) got: test_dwarf_unwind__krava_3 0xa54d1, expecting test_dwarf_unwind__krava_3 unwind: test_dwarf_unwind__krava_2:ip = 0x4a550b (0xa550b) got: test_dwarf_unwind__krava_2 0xa550b, expecting test_dwarf_unwind__krava_2 unwind: test_dwarf_unwind__krava_1:ip = 0x4a554b (0xa554b) got: test_dwarf_unwind__krava_1 0xa554b, expecting test_dwarf_unwind__krava_1 unwind: test__dwarf_unwind:ip = 0x4a5605 (0xa5605) got: test__dwarf_unwind 0xa5605, expecting test__dwarf_unwind test child finished with 0 ---- end ---- DWARF unwind: Ok # Signed-off-by:
-
Jiri Olsa authored
Adding sysfs__read_xll function to be able to read sysfs files with hex numbers in, which do not have 0x prefix. Signed-off-by:
-
Jiri Olsa authored
Adding filename__read_xll function to be able to read files with hex numbers in, which do not have 0x prefix. Signed-off-by:
-
Jiri Olsa authored
Adding --show-round-event to display PERF_RECORD_FINISHED_ROUND events like: # perf script --show-round-events 2>/dev/null yes 8591 [002] 124177.397597: 18 cpu/mem-stores/P: ff... yes 8591 [002] 124177.397615: 1 cpu/mem-loads,ldlat=30/P: ff... PERF_RECORD_FINISHED_ROUND perf 10380 [001] 124177.397622: 6 cpu/mem-loads,ldlat=30/P: ff... PERF_RECORD_FINISHED_ROUND swapper 0 [000] 124177.400518: 88 cpu/mem-stores/P: ff... swapper 0 [000] 124177.400521: 88 cpu/mem-stores/P: ff... Signed-off-by: -
Jiri Olsa authored
There's no new-line after target-override warning, now: $ perf record -a --per-thread Warning: SYSTEM/CPU switch overriding PER-THREAD^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.705 MB perf.data (2939 samples) ] with patch: $ perf record -a --per-thread Warning: SYSTEM/CPU switch overriding PER-THREAD ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.705 MB perf.data (2939 samples) ] Signed-off-by:
-
Jessica Yu authored
Improve error handling when disarming ftrace-based kprobes. Like with arm_kprobe_ftrace(), propagate any errors from disarm_kprobe_ftrace() so that we do not disable/unregister kprobes that are still armed. In other words, unregister_kprobe() and disable_kprobe() should not report success if the kprobe could not be disarmed. disarm_all_kprobes() keeps its current behavior and attempts to disarm all kprobes. It returns the last encountered error and gives a warning if not all probes could be disarmed. This patch is based on Petr Mladek's original patchset (patches 2 and 3) back in 2015, which improved kprobes error handling, found here: https://lkml.org/lkml/2015/2/26/452 However, further work on this had been paused since then and the patches were not upstreamed. Based-on-patches-by:
Petr Mladek <pmladek@suse.com> Signed-off-by:
Jessica Yu <jeyu@kernel.org> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S . Miller <davem@davemloft.net> Cc: Jiri Kosina <jikos@kernel.org> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: live-patching@vger.kernel.org Link: http://lkml.kernel.org/r/20180109235124.30886-3-jeyu@kernel.orgSigned-off-by:
Ingo Molnar <mingo@kernel.org>
-
