Preparatory change to utilize the common posix timer mechanisms.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.747567162@linutronix.de

Preparatory change to utilize the common posix timer mechanisms.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.670026824@linutronix.de

Preparatory change to utilize the common posix timer mechanisms.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.592676753@linutronix.de

Preparatory change to utilize the common posix timer mechanisms.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.513694229@linutronix.de

Preparatory change to utilize the common posix timer mechanisms.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.434598989@linutronix.de

Replace the hrtimer calls by calls to the new try_to_cancel()/arm() kclock
callbacks and move the hrtimer specific implementation into the
corresponding callback functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.355396667@linutronix.de

Add timer_try_to_cancel() and timer_arm() callbacks to kclock which allow
to make common_timer_set() usable by both hrtimer and alarmtimer based
clocks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.278022962@linutronix.de

Zero out the settings struct in the common code so the callbacks do not
have to do it themself.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.200870713@linutronix.de

Replace the hrtimer calls by calls to the new forward/remaining kclock
callbacks and move the hrtimer specific implementation into the
corresponding callback functions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.121437232@linutronix.de

Add two callbacks to kclock which allow using common_)timer_get() for both
hrtimer and alarm timer based clocks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211657.044915536@linutronix.de

Keep track of the activation state of posix timers. This is a preparatory
change for making common_timer_get() usable by both hrtimer and alarm timer
implementations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.967783982@linutronix.de

Use the new timer_rearm() callback to replace the conditional hardcoded
calls into the hrtimer and cpu timer code.

This allows later to bring the same logic to alarmtimers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.889661919@linutronix.de

That function is a misnomer. Rename it with a proper prefix to
posixtimer_rearm().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.811362578@linutronix.de

Add a timer_rearm() callback which is used to make the rescheduling of
posix interval timers independent of the underlying clock implementation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.732632167@linutronix.de

Having the k_clock pointer in the k_itimer struct avoids the lookup in
several code pathes and makes the next steps of unification of the hrtimer
and alarmtimer based posix timers simpler.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.641222072@linutronix.de

Preparatory patch to unify the alarm timer and hrtimer based posix interval
timer handling.

The interval is used as a criteria for rearming decisions so moving it out
of the clock specific data structures allows later unification.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.563922908@linutronix.de

hrtimer based posix-timers and posix-cpu-timers handle the update of the
rearming and overflow related status fields differently.

Move that update to the common rearming code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.484936964@linutronix.de

None of these declarations is required outside of kernel/time. Move them to
an internal header.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20170530211656.394803853@linutronix.de

As a preparation for further changes, cleanup the formatting of the
k_itimer structure and add kernel doc comments.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.316574129@linutronix.de

Move it below the actual implementations as there are new callbacks coming
which would require even more forward declarations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.238209952@linutronix.de

The only user of this facility is ptp_clock, which does not implement any of
those functions.

Remove them to prevent accidental users. Especially the interval timer
interfaces are now more or less impossible to implement because the
necessary infrastructure has been confined to the core code. Aside of that
it's really complex to make these callbacks implemented according to spec
as the alarm timer implementation demonstrates. If at all then a nanosleep
callback might be a reasonable extension. For now keep just what ptp_clock
needs.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.145036286@linutronix.de

Since the removal of the mmtimer driver the export is not longer needed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211656.052744418@linutronix.de

Having a IF_ENABLED(CONFIG_POSIX_TIMERS) inside of a
#ifdef CONFIG_POSIX_TIMERS section is pointless.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/20170530211655.975218056@linutronix.de

Pick up urgent fixes to avoid conflicts.

The alarmtimer code has another source of potentially rearming itself too
fast. Interval timers with a very samll interval have a similar CPU hog
effect as the previously fixed overflow issue.

The reason is that alarmtimers do not implement the normal protection
against this kind of problem which the other posix timer use:

  timer expires -> queue signal -> deliver signal -> rearm timer

This scheme brings the rearming under scheduler control and prevents
permanently firing timers which hog the CPU.

Bringing this scheme to the alarm timer code is a major overhaul because it
lacks all the necessary mechanisms completely.

So for a quick fix limit the interval to one jiffie. This is not
problematic in practice as alarmtimers are usually backed by an RTC for
suspend which have 1 second resolution. It could be therefor argued that
the resolution of this clock should be set to 1 second in general, but
that's outside the scope of this fix.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kostya Serebryany <kcc@google.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170530211655.896767100@linutronix.de

Andrey reported a alartimer related RCU stall while fuzzing the kernel with
syzkaller.

The reason for this is an overflow in ktime_add() which brings the
resulting time into negative space and causes immediate expiry of the
timer. The following rearm with a small interval does not bring the timer
back into positive space due to the same issue.

This results in a permanent firing alarmtimer which hogs the CPU.

Use ktime_add_safe() instead which detects the overflow and clamps the
result to KTIME_SEC_MAX.
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kostya Serebryany <kcc@google.com>
Cc: syzkaller <syzkaller@googlegroups.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20170530211655.802921648@linutronix.de

By moving the kernel side __SI_* defintions right next to the userspace
ones we can kill the non-uapi versions of <asm/siginfo.h> include
include/asm-generic/siginfo.h and untangle the unholy mess of includes.

[ tglx: Removed uapi/asm/siginfo.h from m32r, microblaze, mn10300 and score ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: sparclinux@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170603190102.28866-6-hch@lst.de

Having it in asm-generic/siginfo.h doesn't make any sense as it is in no way
architecture specific.  Move it to signal.h instead where several related
functions already reside.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: sparclinux@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170603190102.28866-5-hch@lst.de

Having it in asm-generic/siginfo.h doesn't make any sense as it is in no way
architecture specific.  Move it to posix-timers.h instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: sparclinux@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170603190102.28866-4-hch@lst.de

Since ia64 defines __ARCH_SI_PREAMBLE_SIZE it can just use the generic
copy_siginfo implementation, which is identical to the architecture
specific one.

With that support for HAVE_ARCH_COPY_SIGINFO can go away entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: sparclinux@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20170603190102.28866-3-hch@lst.de

There is no need for the forward declaration of compat_siginfo provided
here.  We can't yet use the generic header as we need to pull in the
sparc-specific version of the uapi <asm/siginfo.h>, but this prepares
for removing the non-uapi <asm/siginfo.h> entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/20170603190102.28866-2-hch@lst.de

Pull ACPI fixes from Rafael Wysocki:
 "These revert one more problematic commit related to the ACPI-based
  handling of laptop lids and make some unuseful error messages coming
  from ACPICA go away.

  Specifics:

   - Revert one more commit related to the ACPI-based handling of laptop
     lids that changed the default behavior on laptops that booted with
     closed lids and introduced a regression there (Benjamin Tissoires).

   - Add a missing acpi_put_table() to the code implementing the
     /sys/firmware/acpi/tables interface to prevent a counter in the
     ACPICA core from overflowing (Dan Williams).

   - Drop error messages printed by ACPICA on acpi_get_table() reference
     counting mismatches as they need not indicate real errors at this
     point (Lv Zheng)"

* tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPICA: Tables: Fix regression introduced by a too early mechanism enabling
  Revert "ACPI / button: Change default behavior to lid_init_state=open"
  ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service

Pull power management fixes from Rafael Wysocki:
 "These fix two bugs in error code paths in the cpufreq core and in the
  kirkwood-cpufreq driver.

  Specifics:

   - Make cpufreq_register_driver() return an error if the ->init()
     calls fail for all CPUs to prevent non-functional drivers from
     hanging around for no reason (David Arcari).

   - Make kirkwood-cpufreq check the return value of
     clk_prepare_enable() (which may fail) as appropriate (Arvind
     Yadav)"

* tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable()
  cpufreq: cpufreq_register_driver() should return -ENODEV if init fails

Pull /dev/random bug fix from Ted Ts'o:
 "Fix a race on architectures with prioritized interrupts (such as m68k)
  which can causes crashes in drivers/char/random.c:get_reg()"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  fix race in drivers/char/random.c:get_reg()

Merge misc fixes from Andrew Morton:
 "15 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/gdb: make lx-dmesg command work (reliably)
  mm: consider memblock reservations for deferred memory initialization sizing
  mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified
  mlock: fix mlock count can not decrease in race condition
  mm/migrate: fix refcount handling when !hugepage_migration_supported()
  dax: fix race between colliding PMD & PTE entries
  mm: avoid spurious 'bad pmd' warning messages
  mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once
  pcmcia: remove left-over %Z format
  slub/memcg: cure the brainless abuse of sysfs attributes
  initramfs: fix disabling of initramfs (and its compression)
  mm: clarify why we want kmalloc before falling backto vmallock
  frv: declare jiffies to be located in the .data section
  include/linux/gfp.h: fix ___GFP_NOLOCKDEP value
  ksm: prevent crash after write_protect_page fails

lx-dmesg needs access to the log_buf symbol from printk.c.
Unfortunately, the symbol log_buf also exists in BPF's verifier.c and
hence gdb can pick one or the other.  If it happens to pick BPF's
log_buf, lx-dmesg doesn't work:

  (gdb) lx-dmesg
  Python Exception <class 'gdb.MemoryError'> Cannot access memory at address 0x0:
  Error occurred in Python command: Cannot access memory at address 0x0
  (gdb) p log_buf
  $15 = 0x0

Luckily, GDB has a way to deal with this, see
  https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html

  (gdb) info variables ^log_buf$
  All variables matching regular expression "^log_buf$":

  File <linux.git>/kernel/bpf/verifier.c:
  static char *log_buf;

  File <linux.git>/kernel/printk/printk.c:
  static char *log_buf;
  (gdb) p 'verifier.c'::log_buf
  $1 = 0x0
  (gdb) p 'printk.c'::log_buf
  $2 = 0x811a6aa0 <__log_buf> ""
  (gdb) p &log_buf
  $3 = (char **) 0x8120fe40 <log_buf>
  (gdb) p &'verifier.c'::log_buf
  $4 = (char **) 0x8120fe40 <log_buf>
  (gdb) p &'printk.c'::log_buf
  $5 = (char **) 0x8048b7d0 <log_buf>

By being explicit about the location of the symbol, we can make lx-dmesg
work again.  While at it, do the same for the other symbols we need from
printk.c

Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.netSigned-off-by: André Draszik <git@andred.net>
Tested-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We have seen an early OOM killer invocation on ppc64 systems with
crashkernel=4096M:

	kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0
	kthreadd cpuset=/ mems_allowed=7
	CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1
	Call Trace:
	  dump_stack+0xb0/0xf0 (unreliable)
	  dump_header+0xb0/0x258
	  out_of_memory+0x5f0/0x640
	  __alloc_pages_nodemask+0xa8c/0xc80
	  kmem_getpages+0x84/0x1a0
	  fallback_alloc+0x2a4/0x320
	  kmem_cache_alloc_node+0xc0/0x2e0
	  copy_process.isra.25+0x260/0x1b30
	  _do_fork+0x94/0x470
	  kernel_thread+0x48/0x60
	  kthreadd+0x264/0x330
	  ret_from_kernel_thread+0x5c/0xa4

	Mem-Info:
	active_anon:0 inactive_anon:0 isolated_anon:0
	 active_file:0 inactive_file:0 isolated_file:0
	 unevictable:0 dirty:0 writeback:0 unstable:0
	 slab_reclaimable:5 slab_unreclaimable:73
	 mapped:0 shmem:0 pagetables:0 bounce:0
	 free:0 free_pcp:0 free_cma:0
	Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
	lowmem_reserve[]: 0 0 0 0
	Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB
	0 total pagecache pages
	0 pages in swap cache
	Swap cache stats: add 0, delete 0, find 0/0
	Free swap  = 0kB
	Total swap = 0kB
	819200 pages RAM
	0 pages HighMem/MovableOnly
	817481 pages reserved
	0 pages cma reserved
	0 pages hwpoisoned

the reason is that the managed memory is too low (only 110MB) while the
rest of the the 50GB is still waiting for the deferred intialization to
be done.  update_defer_init estimates the initial memoty to initialize
to 2GB at least but it doesn't consider any memory allocated in that
range.  In this particular case we've had

	Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB)

so the low 2GB is mostly depleted.

Fix this by considering memblock allocations in the initial static
initialization estimation.  Move the max_initialise to
reset_deferred_meminit and implement a simple memblock_reserved_memory
helper which iterates all reserved blocks and sums the size of all that
start below the given address.  The cumulative size is than added on top
of the initial estimation.  This is still not ideal because
reset_deferred_meminit doesn't consider holes and so reservation might
be above the initial estimation whihch we ignore but let's make the
logic simpler until we really need to handle more complicated cases.

Fixes: 3a80a7fa ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.czSigned-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>	[4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KVM uses get_user_pages() to resolve its stage2 faults.  KVM sets the
FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it
finds a VM_FAULT_HWPOISON.  KVM handles these hwpoison pages as a
special case.  (check_user_page_hwpoison())

When huge pages are involved, this doesn't work so well.
get_user_pages() calls follow_hugetlb_page(), which stops early if it
receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning
-EFAULT to the caller.  The step to map this to -EHWPOISON based on the
FOLL_ flags is missing.  The hwpoison special case is skipped, and
-EFAULT is returned to user-space, causing Qemu or kvmtool to exit.

Instead, move this VM_FAULT_ to errno mapping code into a header file
and use it from faultin_page() and follow_hugetlb_page().

With this, KVM works as expected.

This isn't a problem for arm64 today as we haven't enabled
MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86
too, so I think this should be a fix.  This doesn't apply earlier than
stable's v4.11.1 due to all sorts of cleanup.

[james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()]
suggested.
  Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.comSigned-off-by: James Morse <james.morse@arm.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org>	[4.11.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Kefeng reported that when running the follow test, the mlock count in
meminfo will increase permanently:

 [1] testcase
 linux:~ # cat test_mlockal
 grep Mlocked /proc/meminfo
  for j in `seq 0 10`
  do
 	for i in `seq 4 15`
 	do
 		./p_mlockall >> log &
 	done
 	sleep 0.2
 done
 # wait some time to let mlock counter decrease and 5s may not enough
 sleep 5
 grep Mlocked /proc/meminfo

 linux:~ # cat p_mlockall.c
 #include <sys/mman.h>
 #include <stdlib.h>
 #include <stdio.h>

 #define SPACE_LEN	4096

 int main(int argc, char ** argv)
 {
	 	int ret;
	 	void *adr = malloc(SPACE_LEN);
	 	if (!adr)
	 		return -1;

	 	ret = mlockall(MCL_CURRENT | MCL_FUTURE);
	 	printf("mlcokall ret = %d\n", ret);

	 	ret = munlockall();
	 	printf("munlcokall ret = %d\n", ret);

	 	free(adr);
	 	return 0;
	 }

In __munlock_pagevec() we should decrement NR_MLOCK for each page where
we clear the PageMlocked flag.  Commit 1ebb7cc6 ("mm: munlock: batch
NR_MLOCK zone state updates") has introduced a bug where we don't
decrement NR_MLOCK for pages where we clear the flag, but fail to
isolate them from the lru list (e.g.  when the pages are on some other
cpu's percpu pagevec).  Since PageMlocked stays cleared, the NR_MLOCK
accounting gets permanently disrupted by this.

Fix it by counting the number of page whose PageMlock flag is cleared.

Fixes: 1ebb7cc6 (" mm: munlock: batch NR_MLOCK zone state updates")
Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.comSigned-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joern Engel <joern@logfs.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: zhongjiang <zhongjiang@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

On failing to migrate a page, soft_offline_huge_page() performs the
necessary update to the hugepage ref-count.

But when !hugepage_migration_supported() , unmap_and_move_hugepage()
also decrements the page ref-count for the hugepage.  The combined
behaviour leaves the ref-count in an inconsistent state.

This leads to soft lockups when running the overcommitted hugepage test
from mce-tests suite.

  Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000
  soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head)
  INFO: rcu_preempt detected stalls on CPUs/tasks:
   Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715
    (detected by 7, t=5254 jiffies, g=963, c=962, q=321)
    thugetlb_overco R  running task        0  2715   2685 0x00000008
    Call trace:
      dump_backtrace+0x0/0x268
      show_stack+0x24/0x30
      sched_show_task+0x134/0x180
      rcu_print_detail_task_stall_rnp+0x54/0x7c
      rcu_check_callbacks+0xa74/0xb08
      update_process_times+0x34/0x60
      tick_sched_handle.isra.7+0x38/0x70
      tick_sched_timer+0x4c/0x98
      __hrtimer_run_queues+0xc0/0x300
      hrtimer_interrupt+0xac/0x228
      arch_timer_handler_phys+0x3c/0x50
      handle_percpu_devid_irq+0x8c/0x290
      generic_handle_irq+0x34/0x50
      __handle_domain_irq+0x68/0xc0
      gic_handle_irq+0x5c/0xb0

Address this by changing the putback_active_hugepage() in
soft_offline_huge_page() to putback_movable_pages().

This only triggers on systems that enable memory failure handling
(ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration
(!ARCH_ENABLE_HUGEPAGE_MIGRATION).

I imagine this wasn't triggered as there aren't many systems running
this configuration.

[akpm@linux-foundation.org: remove dead comment, per Naoya]
Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.comReported-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: Manoj Iyer <manoj.iyer@canonical.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org>	[3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>