Pull ARM SoC fixes from Arnd Bergmann:
 "This is a rather large set of bugfixes, as we just returned from the
  Christmas break. Most of these are relatively unimportant fixes for
  regressions introduced during the merge window, and about half of the
  changes are for mach-omap2.

  A couple of patches are just cleanups and dead code removal that I
  would not normally have considered for merging after -rc2, but I
  decided to take them along with the fixes this time.

  Notable fixes include:

   - removing the skeleton.dtsi include broke a number of machines, and
     we have to put empty /chosen nodes back to be able to pass kernel
     command lines as before

   - enabling Samsung platforms no longer hardwires CONFIG_HZ to 200, as
     it had been for no good reason for a long time"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (46 commits)
  MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code
  drivers: psci: annotate timer on stack to silence odebug messages
  ARM64: defconfig: enable DRM_MESON as module
  ARM64: dts: meson-gx: Add Graphic Controller nodes
  ARM64: dts: meson-gxl: fix GPIO include
  ARM: dts: imx6: Disable "weim" node in the dtsi files
  ARM: dts: qcom: apq8064: Add missing scm clock
  ARM: davinci: da8xx: Fix sleeping function called from invalid context
  ARM: davinci: Make __clk_{enable,disable} functions public
  ARM: davinci: da850: don't add emac clock to lookup table twice
  ARM: davinci: da850: fix infinite loop in clk_set_rate()
  ARM: i.MX: remove map_io callback
  ARM: dts: vf610-zii-dev-rev-b: Add missing newline
  ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry
  ARM: dts: imx31: fix AVIC base address
  ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
  arm64: dts: vexpress: Support GICC_DIR operations
  ARM: dts: vexpress: Support GICC_DIR operations
  firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares
  arm64: dts: msm8996: Add required memory carveouts
  ...

Pull xen fixes and cleanups from Juergen Gross:

 - small fixes for xenbus driver

 - one fix for xen dom0 boot on huge system

 - small cleanups

* tag 'for-linus-4.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  Xen: ARM: Zero reserved fields of xatp before making hypervisor call
  xen: events: Replace BUG() with BUG_ON()
  xen: remove stale xs_input_avail() from header
  xen: return xenstore command failures via response instead of rc
  xen: xenbus driver must not accept invalid transaction ids
  xen/evtchn: use rb_entry()
  xen/setup: Don't relocate p2m over existing one

Rather than keep a list of all possible compression types in the
Makefile, set the target explicitly from Kconfig.
Reviewed-by: Francisco Blas Izquierdo Riera (klondike) <klondike@klondike.es>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When using initramfs compression, the data file compression suffix
gets quotes pulled in from Kconfig, e.g., initramfs_data.cpio".gz"
which make does not match a target and causes rebuild.

Fix this by filtering out quotes from the Kconfig string.

Fixes: 35e669e1 ("initramfs: select builtin initram compression algorithm on KConfig instead of Makefile")
Reviewed-by: Francisco Blas Izquierdo Riera (klondike) <klondike@klondike.es>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs fixes from Darrick Wong:

 - fixes for crashes and double-cleanup errors

 - XFS maintainership handover

 - fix to prevent absurdly large block reservations

 - fix broken sysfs getter/setters

* tag 'xfs-for-linus-4.10-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: fix max_retries _show and _store functions
  xfs: update MAINTAINERS
  xfs: fix crash and data corruption due to removal of busy COW extents
  xfs: use the actual AG length when reserving blocks
  xfs: fix double-cleanup when CUI recovery fails

Pull networking fixes from David Miller:

 1) stmmac_drv_probe() can race with stmmac_open() because we register
    the netdevice too early. Fix from Florian Fainelli.

 2) UFO handling in __ip6_append_data() and ip6_finish_output() use
    different tests for deciding whether a frame will be fragmented or
    not, put them in sync. Fix from Zheng Li.

 3) The rtnetlink getstats handlers need to validate that the netlink
    request is large enough, fix from Mathias Krause.

 4) Use after free in mlx4 driver, from Jack Morgenstein.

 5) Fix setting of garbage UID value in sockets during setattr() calls,
    from Eric Biggers.

 6) Packet drop_monitor doesn't format the netlink messages properly
    such that nlmsg_next fails to work, fix from Reiter Wolfgang.

 7) Fix handling of wildcard addresses in l2tp lookups, from Guillaume
    Nault.

 8) __skb_flow_dissect() can crash on pptp packets, from Ian Kumlien.

 9) IGMP code doesn't reset group query timers properly, from Michal
    Tesar.

10) Fix overzealous MAIN/LOCAL route table combining in ipv4, from
    Alexander Duyck.

11) vxlan offload check needs to be more strict in be2net driver, from
    Sabrina Dubroca.

12) Moving l3mdev to packet hooks lost RX stat counters unintentionally,
    fix from David Ahern.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
  sh_eth: enable RX descriptor word 0 shift on SH7734
  sfc: don't report RX hash keys to ethtool when RSS wasn't enabled
  dpaa_eth: Initialize CGR structure before init
  dpaa_eth: cleanup after init_phy() failure
  net: systemport: Pad packet before inserting TSB
  net: systemport: Utilize skb_put_padto()
  LiquidIO VF: s/select/imply/ for PTP_1588_CLOCK
  libcxgb: fix error check for ip6_route_output()
  net: usb: asix_devices: add .reset_resume for USB PM
  net: vrf: Add missing Rx counters
  drop_monitor: consider inserted data in genlmsg_end
  benet: stricter vxlan offloading check in be_features_check
  ipv4: Do not allow MAIN to be alias for new LOCAL w/ custom rules
  net: macb: Updated resource allocation function calls to new version of API.
  net: stmmac: dwmac-oxnas: use generic pm implementation
  net: stmmac: dwmac-oxnas: fix fixed-link-phydev leaks
  net: stmmac: dwmac-oxnas: fix of-node leak
  Documentation/networking: fix typo in mpls-sysctl
  igmp: Make igmp group member RFC 3376 compliant
  flow_dissector: Update pptp handling to avoid null pointer deref.
  ...

The RX descriptor word 0 on SH7734 has the RFS[9:0] field in bits 16-25
(bits  0-15 usually used for that are occupied by the packet checksum).
Thus  we need to set the 'shift_rd0'  field in the SH7734 SoC data...

Fixes: f0e81fec ("net: sh_eth: Add support SH7734")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If we failed to set up RSS on EF10 (e.g. because firmware declared
 RX_RSS_LIMITED), ethtool --show-nfc $dev rx-flow-hash ... should report
 no fields, rather than confusingly reporting what fields we _would_ be
 hashing on if RSS was working.

Fixes: dcb4123c ("sfc: disable RSS when unsupported")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Madalin Bucur says:

====================
dpaa_eth: a couple of fixes

Add cleanup on PHY initialization failure path, avoid using
uninitialized memory at CGR init.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The QBMan CGR options needs to be zeroed before calling the init
function
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Florian Fainelli says:

====================
net: systemport: Fix padding vs. TSB insertion

This patch series fixes how we pad the packets submitted to the SYSTEMPORT
adapter, and how the transmit status block (prepended 8 bytes) fits in the
picture. The first patch is not technically a bug fix, but is required for the
second path to be applied and to greatly simplify the skb length calculation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Inserting the TSB means adding an extra 8 bytes in front the of packet
that is going to be used as metadata information by the TDMA engine, but
stripped off, so it does not really help with the packet padding.

For some odd packet sizes that fall below the 60 bytes payload (e.g: ARP)
we can end-up padding them after the TSB insertion, thus making them 64
bytes, but with the TDMA stripping off the first 8 bytes, they could
still be smaller than 64 bytes which is required to ingress the switch.

Fix this by swapping the padding and TSB insertion, guaranteeing that
the packets have the right sizes.

Fixes: 80105bef ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since we need to pad our packets, utilize skb_put_padto() which
increases skb->len by how much we need to pad, allowing us to eliminate
the test on skb->len right below.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix a minor fallout from the merge of the timers and the networking
trees. The following error may result if the PTP_1588_CLOCK
prerequisites are not available:

drivers/built-in.o: In function `ptp_clock_unregister':
(.text+0x40e0a5): undefined reference to `pps_unregister_source'
drivers/built-in.o: In function `ptp_clock_unregister':
(.text+0x40e0cc): undefined reference to `posix_clock_unregister'
drivers/built-in.o: In function `ptp_clock_event':
(.text+0x40e249): undefined reference to `pps_event'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e5e1): undefined reference to `pps_register_source'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e62c): undefined reference to `posix_clock_register'
drivers/built-in.o: In function `ptp_clock_register':
(.text+0x40e68d): undefined reference to `pps_unregister_source'
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_route_output() never returns NULL so
check dst->error instead of !dst.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The USB core may call reset_resume when it fails to resume asix device.
And USB core can recovery this abnormal resume at low level driver,
the same .resume at asix driver can work too. Add .reset_resume can
avoid disconnecting after backing from system resume, and NFS can
still be mounted after this commit.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull block layer fixes from Jens Axboe:
 "A set of fixes for the current series, one fixing a regression with
  block size < page cache size in the alias series from Jan. Outside of
  that, two small cleanups for wbt from Bart, a nvme pull request from
  Christoph, and a few small fixes of documentation updates"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix up io_poll documentation
  block: Avoid that sparse complains about context imbalance in __wbt_wait()
  block: Make wbt_wait() definition consistent with declaration
  clean_bdev_aliases: Prevent cleaning blocks that are not in block range
  genhd: remove dead and duplicated scsi code
  block: add back plugging in __blkdev_direct_IO
  nvmet/fcloop: remove some logically dead code performing redundant ret checks
  nvmet: fix KATO offset in Set Features
  nvme/fc: simplify error handling of nvme_fc_create_hw_io_queues
  nvme/fc: correct some printk information
  nvme/scsi: Remove START STOP emulation
  nvme/pci: Delete misleading queue-wrap comment
  nvme/pci: Fix whitespace problem
  nvme: simplify stripe quirk
  nvme: update maintainers information

Pull fbdev fixes from Bartlomiej Zolnierkiewicz:

 - bring fbdev subsystem back into Maintained mode

 - add missing devm_ioremap() error checking to cobalt_lcdfb driver

* tag 'fbdev-v4.10-rc2' of git://github.com/bzolnier/linux:
  video: fbdev: cobalt_lcdfb: Handle return NULL error from devm_ioremap
  MAINTAINERS: add myself as maintainer of fbdev

Pull gcc-plugins fixes from Kees Cook:
 "Small fixes for gcc-plugins when using certain gcc versions:

   - update gcc-common.h for gcc 7 (Emese Revfy)

   - fix latent_entropy type for early gcc on ARM (PaX Team)"

* tag 'gcc-plugins-v4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: update gcc-common.h for gcc-7
  latent_entropy: fix ARM build error on earlier gcc

Merge tag 'davinci-fixes-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes

Pull "DaVinci fixes for v4.10" from Sekhar Nori:

This pull request contains fixes for the following issues

1) Fix two instances of infinite loop occurring in
   clock list for DA850. This fixes kernel hangs in some
   instances and so have been marked for stable kernel.

2) Fix for sleeping function called from atomic context
   with USB 2.0 clock management code introduced in v4.10
   merge window.

* tag 'davinci-fixes-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da8xx: Fix sleeping function called from invalid context
  ARM: davinci: Make __clk_{enable,disable} functions public
  ARM: davinci: da850: don't add emac clock to lookup table twice
  ARM: davinci: da850: fix infinite loop in clk_set_rate()

Merge tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into fixes

Pull "Amlogic fixes for v4.10" from Kevin Hilman:

- DT: GXL: fix GPIO include
- add DT and defconfig for newly merged DRM driver

This pull has one real fix, as a couple non-critical ones.  The DRM
DT/defconfig patches are coming now because I didn't expect the new
driver to make it for the v4.10 merge window, but since it did[1], the
DT and defconfig should go into the same release.

[1] bbbe775e drm: Add support for Amlogic Meson Graphic Controller

* tag 'amlogic-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: defconfig: enable DRM_MESON as module
  ARM64: dts: meson-gx: Add Graphic Controller nodes
  ARM64: dts: meson-gxl: fix GPIO include

Merge tag 'psci-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux into fixes

Pull "PSCI fixes for v4.10" from Lorenzo Pieralisi:

Two minor fixes following the merge of the PSCI checker:

- Annotate the PSCI checker timer on the stack used to wake-up from
  suspend to prevent warnings when the DEBUG_OBJECTS config option
  is enabled
- Extend the PSCI entry in the maintainers list to also include the
  PSCI checker code

* tag 'psci-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux:
  MAINTAINERS: extend PSCI entry to cover the newly add PSCI checker code
  drivers: psci: annotate timer on stack to silence odebug messages

Merge tag 'juno-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes

Pull "ARMv8 Juno/VExpress fixes for v4.10" from Sudeep Holla:

A simple fix to extend GICv2 CPU interface registers from 4K to 8K
on AEMv8 FVP/RTSM models in order to support split priority drop and
interrupt deactivation.

* tag 'juno-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: vexpress: Support GICC_DIR operations

Merge tag 'vexpress-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes

Pull "ARMv7 VExpress fixes for v4.10" from Sudeep Holla:

A simple fix to extend GICv2 CPU interface registers from 4K to 8K
on VExpress TC1 and TC2 platforms in order to support split priority
drop and interrupt deactivation.

* tag 'vexpress-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  ARM: dts: vexpress: Support GICC_DIR operations

Merge tag 'scpi-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into fixes

Pull "SCPI fix for v4.10" from Sudeep Holla:

A simple fix for reading only lower 32-bit sensor values on pre-1.0 SCPI
firmwares so that upper 32-bit (garbage) value is discarded properly.

* tag 'scpi-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scpi: fix reading sensor values on pre-1.0 SCPI firmwares

Merge tag 'imx-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes

Pull "i.MX fixes for 4.10" from Shawn Guo:

 - A format fix for vf610-zii-dev-rev-b.dts, which has a very odd line
   due to misses a newline.
 - A fix to imx-weim bus error seen on board which doesn't actually use
   the bus.
 - A fix for imx6qdl-nitrogen6x board which has conflicting usage of
   pad NANDF_CS2.
 - A cleanup on i.MX1 machine to remove .map_io callback, which also
   fixes a compiling error for NOMMU build.
 - Fix AVIC base address in i.MX31 device tree source.  The problem was
   shadowed by the AVIC driver, which takes the correct base address
   from a SoC specific header file.

* tag 'imx-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6: Disable "weim" node in the dtsi files
  ARM: i.MX: remove map_io callback
  ARM: dts: vf610-zii-dev-rev-b: Add missing newline
  ARM: dts: imx6qdl-nitrogen6x: remove duplicate iomux entry
  ARM: dts: imx31: fix AVIC base address

Merge tag 'qcom-arm-fixes-for-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes

Pull "Qualcomm ARM DTS Fixes for v4.10-rc2" from Andy Gross:

* Add SCM clock for APQ8064 to fix boot failures

* tag 'qcom-arm-fixes-for-4.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: qcom: apq8064: Add missing scm clock

Merge tag 'omap-for-v4.10/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Pull "omap fixes for v4.10-rc cycle" from Tony Lindgren:

Fist set of fixes for omaps for v4.10-rc cycle, mostly
to deal with various regressions noticed during the merge
window and to fix various device tree configurations for
boards. Also included is removal of mach-omap2/gpio.c that
is now dead code with device tree based booting that should
be OK for the early -rc cycle:

- A series of fixes to add empty chosen node to fix regressions
  caused for bootloaders that don't create chosen node as the
  decompressor needs the chosen node to merge command line and
  ATAGs into it

- Fix missing logicpd-som-lv-37xx-devkit.dtb entry in Makefile

- Fix regression for am437x timers

- Fix wrong strcat for non-NULL terminated string

- A series of changes to fix tps65217 interrupts to not use
  defines as we don't do that for interrupts

- Two patches to fix USB VBUS detection on am57xx-idk and force it
  to peripheral mode until dwc3 role detection is working

- Add missing dra72-evm-tps65917 missing voltage supplies
  accidentally left out of an earlier patch

- Fix n900 eMMC detection when booted on qemu

- Remove unwanted pr_err on failed memory allocation for
  prm_common.c

- Remove legacy mach-omap2/gpio.c that now is dead code
  since we boot mach-omap2 in device tree only mode

- Fix am572x-idk pcie1 by adding the missing gpio reset pin

* tag 'omap-for-v4.10/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (23 commits)
  ARM: dts: am572x-idk: Add gpios property to control PCIE_RESETn
  ARM: OMAP2+: PRM: Delete an error message for a failed memory allocation
  ARM: dts: n900: Mark eMMC slot with no-sdio and no-sd flags
  ARM: dts: dra72-evm-tps65917: Add voltage supplies to usb_phy, mmc, dss
  ARM: dts: am57xx-idk: Put USB2 port in peripheral mode
  ARM: dts: am57xx-idk: Support VBUS detection on USB2 port
  dt-bindings: input: Specify the interrupt number of TPS65217 power button
  dt-bindings: power/supply: Update TPS65217 properties
  dt-bindings: mfd: Remove TPS65217 interrupts
  ARM: dts: am335x: Fix the interrupt name of TPS65217
  ARM: omap2+: fixing wrong strcat for Non-NULL terminated string
  ARM: omap2+: am437x: rollback to use omap3_gptimer_timer_init()
  ARM: dts: omap3: Add DTS for Logic PD SOM-LV 37xx Dev Kit
  ARM: dts: dra7: Add an empty chosen node to top level DTSI
  ARM: dts: dm816x: Add an empty chosen node to top level DTSI
  ARM: dts: dm814x: Add an empty chosen node to top level DTSI
  ARM: dts: am4372: Add an empty chosen node to top level DTSI
  ARM: dts: am33xx: Add an empty chosen node to top level DTSI
  ARM: dts: omap5: Add an empty chosen node to top level DTSI
  ARM: dts: omap4: Add an empty chosen node to top level DTSI
  ...

Merge tag 'samsung-soc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into fixes

Samsung mach/soc update for v4.10:

1. Minor cleanup in smp_operations.
2. Another step in switching s3c24xx to new DMA API.
3. Drop fixed requirement for HZ=200 on Samsung platforms.

* tag 'samsung-soc-4.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: Drop fixed 200 Hz timer requirement from Samsung platforms
  ARM: S3C24XX: Add DMA slave maps for remaining s3c24xx SoCs
  ARM: EXYNOS: Remove smp_init_cpus hook from platsmp.c

Merge tag 'qcom-fixes-for-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into fixes

Qualcomm ARM64 Fixes for v4.10-rc1

* Fix instability in MSM8996 due to incorrect carveouts

* tag 'qcom-fixes-for-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: dts: msm8996: Add required memory carveouts

Merge tag 'renesas-fixes-for-v4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes

Renesas ARM Based SoC Fixes for v4.10

* Provide sd0_uhs node

* tag 'renesas-fixes-for-v4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: h3ulcb: Provide sd0_uhs node

Here, If devm_ioremap will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: Yoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

I would like to help with fbdev maintenance.  I can dedicate some time
for reviewing and handling patches but won't have time for much more.

The subsystem will remain in maintenance mode (no new drivers will be
added to it).

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>

max_retries _show and _store functions should test against cfg->max_retries,
not cfg->retry_timeout
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

I am taking over as XFS maintainer from Dave Chinner[1], so update
contact information and git tree pointers.

[1] http://lkml.iu.edu/hypermail/linux/kernel/1612.1/04390.htmlSigned-off-by: Darrick J. Wong <darrick.wong@oracle.com>

There is a race window between write_cache_pages calling
clear_page_dirty_for_io and XFS calling set_page_writeback, in which
the mapping for an inode is tagged neither as dirty, nor as writeback.

If the COW shrinker hits in exactly that window we'll remove the delayed
COW extents and writepages trying to write it back, which in release
kernels will manifest as corruption of the bmap btree, and in debug
kernels will trip the ASSERT about now calling xfs_bmapi_write with the
COWFORK flag for holes.  A complex customer load manages to hit this
window fairly reliably, probably by always having COW writeback in flight
while the cow shrinker runs.

This patch adds another check for having the I_DIRTY_PAGES flag set,
which is still set during this race window.  While this fixes the problem
I'm still not overly happy about the way the COW shrinker works as it
still seems a bit fragile.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

We need to use the actual AG length when making per-AG reservations,
since we could otherwise end up reserving more blocks out of the last
AG than there are actual blocks.
Complained-about-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

Dan Carpenter reported a double-free of rcur if _defer_finish fails
while we're recovering CUI items.  Fix the error recovery to prevent
this.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

The move from rx-handler to L3 receive handler inadvertantly dropped the
rx counters. Restore them.

Fixes: 74b20582 ("net: l3mdev: Add hook in ip and ipv6")
Reported-by: Dinesh Dutt <ddutt@cumulusnetworks.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>