The locking order for pending vmtruncate is wrong, it can lead to
following race:

        write                  wmtruncate work
------------------------    ----------------------
lock i_mutex
check i_truncate_pending   check i_truncate_pending
truncate_inode_pages()     lock i_mutex (blocked)
copy data to page cache
unlock i_mutex
                           truncate_inode_pages()

The fix is take i_mutex before calling __ceph_do_pending_vmtruncate()

Fixes: http://tracker.ceph.com/issues/5453Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

when mounting ceph with a dev name that starts with a slash, ceph
would attempt to access the character before that slash. Since we
don't actually own that byte of memory, we would trigger an
invalid access:

[   43.499934] BUG: unable to handle kernel paging request at ffff880fa3a97fff
[   43.500984] IP: [<ffffffff818f3884>] parse_mount_options+0x1a4/0x300
[   43.501491] PGD 743b067 PUD 10283c4067 PMD 10282a6067 PTE 8000000fa3a97060
[   43.502301] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
[   43.503006] Dumping ftrace buffer:
[   43.503596]    (ftrace buffer empty)
[   43.504046] CPU: 0 PID: 10879 Comm: mount Tainted: G        W    3.10.0-sasha #1129
[   43.504851] task: ffff880fa625b000 ti: ffff880fa3412000 task.ti: ffff880fa3412000
[   43.505608] RIP: 0010:[<ffffffff818f3884>]  [<ffffffff818f3884>] parse_mount_options$
[   43.506552] RSP: 0018:ffff880fa3413d08  EFLAGS: 00010286
[   43.507133] RAX: ffff880fa3a98000 RBX: ffff880fa3a98000 RCX: 0000000000000000
[   43.507893] RDX: ffff880fa3a98001 RSI: 000000000000002f RDI: ffff880fa3a98000
[   43.508610] RBP: ffff880fa3413d58 R08: 0000000000001f99 R09: ffff880fa3fe64c0
[   43.509426] R10: ffff880fa3413d98 R11: ffff880fa38710d8 R12: ffff880fa3413da0
[   43.509792] R13: ffff880fa3a97fff R14: 0000000000000000 R15: ffff880fa3413d90
[   43.509792] FS:  00007fa9c48757e0(0000) GS:ffff880fd2600000(0000) knlGS:000000000000$
[   43.509792] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[   43.509792] CR2: ffff880fa3a97fff CR3: 0000000fa3bb9000 CR4: 00000000000006b0
[   43.509792] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   43.509792] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[   43.509792] Stack:
[   43.509792]  0000e5180000000e ffffffff85ca1900 ffff880fa38710d8 ffff880fa3413d98
[   43.509792]  0000000000000120 0000000000000000 ffff880fa3a98000 0000000000000000
[   43.509792]  ffffffff85cf32a0 0000000000000000 ffff880fa3413dc8 ffffffff818f3c72
[   43.509792] Call Trace:
[   43.509792]  [<ffffffff818f3c72>] ceph_mount+0xa2/0x390
[   43.509792]  [<ffffffff81226314>] ? pcpu_alloc+0x334/0x3c0
[   43.509792]  [<ffffffff81282f8d>] mount_fs+0x8d/0x1a0
[   43.509792]  [<ffffffff812263d0>] ? __alloc_percpu+0x10/0x20
[   43.509792]  [<ffffffff8129f799>] vfs_kern_mount+0x79/0x100
[   43.509792]  [<ffffffff812a224d>] do_new_mount+0xcd/0x1c0
[   43.509792]  [<ffffffff812a2e8d>] do_mount+0x15d/0x210
[   43.509792]  [<ffffffff81220e55>] ? strndup_user+0x45/0x60
[   43.509792]  [<ffffffff812a2fdd>] SyS_mount+0x9d/0xe0
[   43.509792]  [<ffffffff83fd816c>] tracesys+0xdd/0xe2
[   43.509792] Code: 4c 8b 5d c0 74 0a 48 8d 50 01 49 89 14 24 eb 17 31 c0 48 83 c9 ff $
[   43.509792] RIP  [<ffffffff818f3884>] parse_mount_options+0x1a4/0x300
[   43.509792]  RSP <ffff880fa3413d08>
[   43.509792] CR2: ffff880fa3a97fff
[   43.509792] ---[ end trace 22469cd81e93af51 ]---
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Reviewed-by: Sage Weil <sage@inktan.com>

A malicious monitor can craft an auth reply message that could cause a
NULL function pointer dereference in the client's kernel.

To prevent this, the auth_none protocol handler needs an empty
ceph_auth_client_ops->build_request() function.

CVE-2013-1059
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Chanam Park <chanam.park@hkpco.kr>
Reviewed-by: Seth Arnold <seth.arnold@canonical.com>
Reviewed-by: Sage Weil <sage@inktank.com>
Cc: stable@vger.kernel.org

Drop ignored return value.  Fix allocation failure case to not leak.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>

Either in vfs_write or io_submit,it call file_start/end_write.
The different between file_start/end_write and sb_start/end_write is
file_ only handle regular file.But i think in ceph_aio_write,it only
for regular file.
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Acked-by: Yan, Zheng <zheng.z.yan@intel.com>

Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>

[ 1121.231883] BUG: sleeping function called from invalid context at kernel/rwsem.c:20
[ 1121.231935] in_atomic(): 1, irqs_disabled(): 0, pid: 9831, name: mv
[ 1121.231971] 1 lock held by mv/9831:
[ 1121.231973]  #0:  (&(&ci->i_ceph_lock)->rlock){+.+...},at:[<ffffffffa02bbd38>] ceph_getxattr+0x58/0x1d0 [ceph]
[ 1121.231998] CPU: 3 PID: 9831 Comm: mv Not tainted 3.10.0-rc6+ #215
[ 1121.232000] Hardware name: To Be Filled By O.E.M. To Be Filled By
O.E.M./To be filled by O.E.M., BIOS 080015  11/09/2011
[ 1121.232027]  ffff88006d355a80 ffff880092f69ce0 ffffffff8168348c ffff880092f69cf8
[ 1121.232045]  ffffffff81070435 ffff88006d355a20 ffff880092f69d20 ffffffff816899ba
[ 1121.232052]  0000000300000004 ffff8800b76911d0 ffff88006d355a20 ffff880092f69d68
[ 1121.232056] Call Trace:
[ 1121.232062]  [<ffffffff8168348c>] dump_stack+0x19/0x1b
[ 1121.232067]  [<ffffffff81070435>] __might_sleep+0xe5/0x110
[ 1121.232071]  [<ffffffff816899ba>] down_read+0x2a/0x98
[ 1121.232080]  [<ffffffffa02baf70>] ceph_vxattrcb_layout+0x60/0xf0 [ceph]
[ 1121.232088]  [<ffffffffa02bbd7f>] ceph_getxattr+0x9f/0x1d0 [ceph]
[ 1121.232093]  [<ffffffff81188d28>] vfs_getxattr+0xa8/0xd0
[ 1121.232097]  [<ffffffff8118900b>] getxattr+0xab/0x1c0
[ 1121.232100]  [<ffffffff811704f2>] ? final_putname+0x22/0x50
[ 1121.232104]  [<ffffffff81155f80>] ? kmem_cache_free+0xb0/0x260
[ 1121.232107]  [<ffffffff811704f2>] ? final_putname+0x22/0x50
[ 1121.232110]  [<ffffffff8109e63d>] ? trace_hardirqs_on+0xd/0x10
[ 1121.232114]  [<ffffffff816957a7>] ? sysret_check+0x1b/0x56
[ 1121.232120]  [<ffffffff81189c9c>] SyS_fgetxattr+0x6c/0xc0
[ 1121.232125]  [<ffffffff81695782>] system_call_fastpath+0x16/0x1b
[ 1121.232129] BUG: scheduling while atomic: mv/9831/0x10000002
[ 1121.232154] 1 lock held by mv/9831:
[ 1121.232156]  #0:  (&(&ci->i_ceph_lock)->rlock){+.+...}, at:
[<ffffffffa02bbd38>] ceph_getxattr+0x58/0x1d0 [ceph]

I think move the ci->i_ceph_lock down is safe because we can't free
ceph_inode_info at there.

CC: stable@vger.kernel.org  # 3.8+
Signed-off-by: Jianpeng Ma <majianpeng@gmail.com>
Reviewed-by: Sage Weil <sage@inktank.com>

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

gcc isn't quite smart enough and generates these warnings:

drivers/block/rbd.c: In function 'rbd_img_request_fill':
drivers/block/rbd.c:1266:22: warning: 'bio_list' may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/block/rbd.c:2186:14: note: 'bio_list' was declared here
drivers/block/rbd.c:2247:10: warning: 'pages' may be used uninitialized in this function [-Wmaybe-uninitialized]

even though they are initialized for their respective code paths.
Signed-off-by: Sage Weil <sage@inktank.com>

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

We may receive old request reply from the exporter MDS after receiving
the importer MDS' cap import message.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

The client can receive truncate request from MDS at any time.
So the page writeback code need to get i_size, truncate_seq and
truncate_size atomically
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

ceph_encode_inode_release() can race with ceph_open() and release
caps wanted by open files. So it should call __ceph_caps_wanted()
to get the wanted caps.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

check the "not truncated yet" case
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

handle_reply() calls complete_request() only if the first OSD reply
has ONDISK flag.
Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: Sage Weil <sage@inktank.com>

Add a name to the list of authors.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Updating an image header needs to be protected to ensure it's
done consistently.  However distinct headers can be updated
concurrently without a problem.  Instead of using the global
control lock to serialize headder updates, just rely on the header
semaphore.  (It's already used, this just moves it out to cover
a broader section of the code.)

That leaves the control mutex protecting only the creation of rbd
clients, so rename it.

This resolves:
    http://tracker.ceph.com/issues/5222Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

When an rbd device is first getting mapped, its device registration
is protected the control mutex.  There is no need to do that though,
because the device has already been assigned an id that's guaranteed
to be unique.

An unmap of an rbd device won't proceed if the device has a non-zero
open count or is already being unmapped.  So there's no need to hold
the control mutex in that case either.

Finally, an rbd device can't be opened if it is being removed, and
it won't go away if there is a non-zero open count.  So here too
there's no need to hold the control mutex while getting or putting a
reference to an rbd device's Linux device structure.

Drop the mutex calls in these cases.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Make sure two concurrent unmap operations on the same rbd device
won't collide, by only proceeding with the removal and cleanup of a
device if is not already underway.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

When unmapping a device, its id is supplied, and that is used to
look up which rbd device should be unmapped.  Looking up the
device involves searching the rbd device list while holding
a spinlock that protects access to that list.

Currently all of this is done under protection of the control lock,
but that protection is going away soon.  To ensure the rbd_dev is
still valid (still on the list) while setting its REMOVING flag, do
so while still holding the list lock.  To do so, get rid of
__rbd_get_dev(), and open code what it did in the one place it
was used.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

If an osd client response message arrives that has a front section
that's too big for the buffer set aside to receive it, a warning
gets reported and a new buffer is allocated.

The warning says nothing about which connection had the problem.
Add the peer type and number to what gets reported, to be a bit more
informative.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

If more than one rbd image has the same ceph cluster configuration
(same options, same set of monitors, same keys) they normally share
a single rbd client.

When an image is getting mapped, rbd looks to see if an existing
client can be used, and creates a new one if not.

The lookup and creation are not done under a common lock though, so
mapping two images concurrently could lead to duplicate clients
getting set up needlessly.  This isn't a major problem, but it's
wasteful and different from what's intended.

This patch fixes that by using the control mutex to protect
both the lookup and (if needed) creation of the client.  It
was previously used just when creating.

This resolves:
    http://tracker.ceph.com/issues/3094Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

This includes a few relatively small fixes I found while examining
the code that refreshes image information.

This resolves:
    http://tracker.ceph.com/issues/5040Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Neither zero_bio_chain() nor zero_pages() contains a call to flush
caches after zeroing a portion of a page.  This can cause problems
on architectures that have caches that allow virtual address
aliasing.

This resolves:
    http://tracker.ceph.com/issues/4777Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

When an osd request is set to linger, the osd client holds onto the
request so it can be re-submitted following certain osd map changes.
The osd client holds a reference to the request until it is
unregistered.  This is used by rbd for watch requests.

Currently, the reference is taken when the request is marked with
the linger flag.  This means that if an error occurs after that
time but before the the request completes successfully, that
reference is leaked.

There's really no reason to take the reference until the request is
registered in the the osd client's list of lingering requests, and
that only happens when the lingering (watch) request completes
successfully.

So take that reference only when it gets registered following
succesful completion, and drop it (as before) when the request
gets unregistered.  This avoids the reference problem on error
in rbd.

Rearrange ceph_osdc_unregister_linger_request() to avoid using
the request pointer after it may have been freed.

And hold an extra reference in kick_requests() while handling
a linger request that has not yet been registered, to ensure
it doesn't go away.

This resolves:
    http://tracker.ceph.com/issues/3859Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

I introduced a new temporary variable "info" instead of
"m->m_info[mds]".  Also I reversed the if condition and pulled
everything in one indent level.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Alex Elder <elder@inktank.com>

This patch makes the following improvements to the error handling
in the ceph_mdsmap_decode function:

- Add a NULL check for return value from kcalloc
- Make use of the variable err
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Sage Weil <sage@inktank.com>

The reference to the original request dropped at the end of
rbd_img_obj_exists_callback() corresponds to the reference taken
in rbd_img_obj_exists_submit() to account for the stat request
referring to it.  Move the put of that reference up right after
clearing that pointer to make its purpose more obvious.
Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>

Signed-off-by: Jim Schutt <jaschut@sandia.gov>
Reviewed-by: Alex Elder <elder@inktank.com>

drivers/block/rbd.c: In function ‘zero_pages’:
drivers/block/rbd.c:1102: warning: comparison of distinct pointer types lacks a cast

Remove the hackish casts and use min_t() to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Alex Elder <elder@inktank.com>

Pull another powerpc fix from Benjamin Herrenschmidt:
 "I mentioned that while we had fixed the kernel crashes, EEH error
  recovery didn't always recover...  It appears that I had a fix for
  that already in powerpc-next (with a stable CC).

  I cherry-picked it today and did a few tests and it seems that things
  now work quite well.  The patch is also pretty simple, so I see no
  reason to wait before merging it."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/eeh: Fix fetching bus for single-dev-PE

Pull SCSI fixes from James Bottomley:
 "This is a set of seven bug fixes.  Several fcoe fixes for locking
  problems, initiator issues and a VLAN API change, all of which could
  eventually lead to data corruption, one fix for a qla2xxx locking
  problem which could lead to multiple completions of the same request
  (and subsequent data corruption) and a use after free in the ipr
  driver.  Plus one minor MAINTAINERS file update"

(only six bugfixes in this pull, since I had already pulled the fcoe API
fix directly from Robert Love)

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] ipr: Avoid target_destroy accessing memory after it was freed
  [SCSI] qla2xxx: Fix for locking issue between driver ISR and mailbox routines
  MAINTAINERS: Fix fcoe mailing list
  libfc: extend ex_lock to protect all of fc_seq_send
  libfc: Correct check for initiator role
  libfcoe: Fix Conflicting FCFs issue in the fabric

While running Linux as guest on top of phyp, we possiblly have
PE that includes single PCI device. However, we didn't return
its PCI bus correctly and it leads to failure on recovery from
EEH errors for single-dev-PE. The patch fixes the issue.

Cc: <stable@vger.kernel.org> # v3.7+
Cc: Steve Best <sbest@us.ibm.com>
Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull powerpc fixes from Ben Herrenschmidt:
 "We discovered some breakage in our "EEH" (PCI Error Handling) code
  while doing error injection, due to a couple of regressions.  One of
  them is due to a patch (37f02195 "powerpc/pci: fix PCI-e devices
  rescan issue on powerpc platform") that, in hindsight, I shouldn't
  have merged considering that it caused more problems than it solved.

  Please pull those two fixes.  One for a simple EEH address cache
  initialization issue.  The other one is a patch from Guenter that I
  had originally planned to put in 3.11 but which happens to also fix
  that other regression (a kernel oops during EEH error handling and
  possibly hotplug).

  With those two, the couple of test machines I've hammered with error
  injection are remaining up now.  EEH appears to still fail to recover
  on some devices, so there is another problem that Gavin is looking
  into but at least it's no longer crashing the kernel."

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pci: Improve device hotplug initialization
  powerpc/eeh: Add eeh_dev to the cache during boot

Due to recent changes and expecations of proper cpu bindings, there are
now cases for many of the in-tree devicetrees where a WARN() will hit
on boot due to badly formatted /cpus nodes.

Downgrade this to a pr_warn() to be less alarmist, since it's not a
new problem.

Tested on Arndale, Cubox, Seaboard and Panda ES. Panda hits the WARN
without this, the others do not.
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 37f02195 (powerpc/pci: fix PCI-e devices rescan issue on powerpc
platform) fixes a problem with interrupt and DMA initialization on hot
plugged devices. With this commit, interrupt and DMA initialization for
hot plugged devices is handled in the pci device enable function.

This approach has a couple of drawbacks. First, it creates two code paths
for device initialization, one for hot plugged devices and another for devices
known during the initial PCI scan. Second, the initialization code for hot
plugged devices is only called when the device is enabled, ie typically
in the probe function. Also, the platform specific setup code is called each
time pci_enable_device() is called, not only once during device discovery,
meaning it is actually called multiple times, once for devices discovered
during the initial scan and again each time a driver is re-loaded.

The visible result is that interrupt pins are only assigned to hot plugged
devices when the device driver is loaded. Effectively this changes the PCI
probe API, since pci_dev->irq and the device's dma configuration will now
only be valid after pci_enable() was called at least once. A more subtle
change is that platform specific PCI device setup is moved from device
discovery into the driver's probe function, more specifically into the
pci_enable_device() call.

To fix the inconsistencies, add new function pcibios_add_device.
Call pcibios_setup_device from pcibios_setup_bus_devices if device setup
is not complete, and from pcibios_add_device if bus setup is complete.

With this change, device setup code is moved back into device initialization,
and called exactly once for both static and hot plugged devices.

[ This also fixes a regression introduced by the above patch which
  causes dev->irq to be overwritten under some cirumstances after
  MSIs have been enabled for the device which leads to crashes due
  to the MSI core "hijacking" dev->irq to store the base MSI number
  and not the LSI. --BenH
]

Cc: Yuanquan Chen <Yuanquan.Chen@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hiroo Matsumoto <matsumoto.hiroo@jp.fujitsu.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull crypto fix from Herbert Xu:
 "This fixes a crash in the crypto layer exposed by an SCTP test tool"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algboss - Hold ref count on larval