- 27 Apr, 2018 1 commit
-
-
Stefano Brivio authored
A vti6 interface can carry IPv4 as well, so it makes no sense to enforce a minimum MTU of IPV6_MIN_MTU. If the user sets an MTU below IPV6_MIN_MTU, IPv6 will be disabled on the interface, courtesy of addrconf_notify(). Reported-by:
Xin Long <lucien.xin@gmail.com> Fixes: b96f9afe ("ipv4/6: use core net MTU range checking") Fixes: c6741fbe ("vti6: Properly adjust vti6 MTU from MTU of lower device") Fixes: 53c81e95 ("ip6_vti: adjust vti mtu according to mtu of lower device") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
- 16 Apr, 2018 1 commit
-
-
Steffen Klassert authored
We need to make sure that all states are really deleted before we check that the state lists are empty. Otherwise we trigger a warning. Fixes: baeb0dbb ("xfrm6_tunnel: exit_net cleanup check added") Reported-and-tested-by:syzbot+777bf170a89e7b326405@syzkaller.appspotmail.com Signed-off-by:
-
- 09 Apr, 2018 1 commit
-
-
Kevin Easton authored
Key extensions (struct sadb_key) include a user-specified number of key bits. The kernel uses that number to determine how much key data to copy out of the message in pfkey_msg2xfrm_state(). The length of the sadb_key message must be verified to be long enough, even in the case of SADB_X_AALG_NULL. Furthermore, the sadb_key_len value must be long enough to include both the key data and the struct sadb_key itself. Introduce a helper function verify_key_len(), and call it from parse_exthdrs() where other exthdr types are similarly checked for correctness. Signed-off-by:
Kevin Easton <kevin@guarana.org> Reported-by: syzbot+5022a34ca5a3d49b84223653fab632dfb7b4cf37@syzkaller.appspotmail.com Signed-off-by:
-
- 08 Apr, 2018 25 commits
-
-
Esben Haabendal authored
The datasheet specifies a 3uS pause after performing a software reset. The default implementation of genphy_soft_reset() does not provide this, so implement soft_reset with the needed pause. Signed-off-by:
Esben Haabendal <eha@deif.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2018-04-09 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Two sockmap fixes: i) fix a potential warning when a socket with pending cork data is closed by freeing the memory right when the socket is closed instead of seeing still outstanding memory at garbage collector time, ii) fix a NULL pointer deref in case of duplicates release calls, so make sure to only reset the sk_prot pointer when it's in a valid state to do so, both from John. 2) Fix a compilation warning in bpf_prog_attach_check_attach_type() by moving the function under CONFIG_CGROUP_BPF ifdef since only used there, from Anders. ==================== Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2018-04-08 Here's one important Bluetooth fix for the 4.17-rc series that's needed to pass several Bluetooth qualification test cases. Let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: -
Jiri Pirko authored
This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4 ("devlink: Add support for resource abstraction") Signed-off-by:Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Esben Haabendal authored
The current (mildly evil) fsl_pq_mdio code uses an undocumented shadow of the TBIPA register on LS1021A, which happens to be read-only. Changing TBI PHY address therefore does not work on LS1021A. The real (and documented) address of the TBIPA registere lies in the eTSEC block and not in MDIO/MII, which is read/write, so using that fixes the problem. Signed-off-by:
-
Esben Haabendal authored
This introduces a simpler and generic method for for finding (and mapping) the TBIPA register. Instead of relying of complicated logic for finding the TBIPA register address based on the MDIO or MII register block base address, which even in some cases relies on undocumented shadow registers, a second "reg" entry for the mdio bus devicetree node specifies the TBIPA register. Backwards compatibility is kept, as the existing logic is applied when only a single "reg" mapping is specified. Signed-off-by:
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Fix driver reset and DMA bugs This patch series introduces some fixes to the driver reset routines and a patch that fixes mistakes caught by the kernel DMA debugger. The reset fixes include a fix to reset TX queue counters properly after a reset as well as updates to driver reset error-handling code. It also provides updates to the reset handling routine for redundant backing VF failover and partition migration cases. ==================== Signed-off-by: -
Nathan Fontenot authored
When resetting the ibmvnic driver after a partition migration occurs there is no requirement to do a reset of the main CRQ. The current driver code does the required re-enable of the main CRQ, then does a reset of the main CRQ later. What we should be doing for a driver reset after a migration is to re-enable the main CRQ, release all the sub-CRQs, and then allocate new sub-CRQs after capability negotiation. This patch updates the handling of mobility resets to do the proper work and not reset the main CRQ. To do this the initialization/reset of the main CRQ had to be moved out of the ibmvnic_init routine and in to the ibmvnic_probe and do_reset routines. Signed-off-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Thomas Falcon authored
There is a failover case for a non-redundant pseries VNIC configuration that was not being handled properly. The current implementation assumes that the driver will always have a redandant device to communicate with following a failover notification. There are cases, however, when a non-redundant configuration can receive a failover request. If that happens, the driver should wait until it receives a signal that the device is ready for operation. The driver is agnostic of its backing hardware configuration, so this fix necessarily affects all device failover management. The driver needs to wait until it receives a signal that the device is ready for resetting. A flag is introduced to track this intermediary state where the driver is waiting for an active device. Signed-off-by:
-
Thomas Falcon authored
In some cases, if the driver is waiting for a reset following a device parameter change, failure to schedule a reset can result in a hang since a completion signal is never sent. If the device configuration is being altered by a tool such as ethtool or ifconfig, it could cause the console to hang if the reset request does not get scheduled. Add some additional error handling code to exit the wait_for_completion if there is one in progress. Signed-off-by:
-
Thomas Falcon authored
The counter that tracks used TX descriptors pending completion needs to be zeroed as part of a device reset. This change fixes a bug causing transmit queues to be stopped unnecessarily and in some cases a transmit queue stall and timeout reset. If the counter is not reset, the remaining descriptors will not be "removed", effectively reducing queue capacity. If the queue is over half full, it will cause the queue to stall if stopped. Signed-off-by:
-
Thomas Falcon authored
Fix some mistakes caught by the DMA debugger. The first change fixes a unnecessary unmap that should have been removed in an earlier update. The next hunk fixes another bad unmap by zeroing the bit checked to determine that an unmap is needed. The final change fixes some buffers that are unmapped with the wrong direction specified. Signed-off-by:
-
Cong Wang authored
Commit 4b2e6877 ("tipc: Fix namespace violation in tipc_sk_fill_sock_diag") tried to fix the crash but failed, the crash is still 100% reproducible with it. In tipc_sk_fill_sock_diag(), skb is the diag dump we are filling, it is not correct to retrieve its NETLINK_CB(), instead, like other protocol diag, we should use NETLINK_CB(cb->skb).sk here. Reported-by: <syzbot+326e587eff1074657718@syzkaller.appspotmail.com> Fixes: 4b2e6877 ("tipc: Fix namespace violation in tipc_sk_fill_sock_diag") Fixes: c30b70de (tipc: implement socket diagnostics for AF_TIPC) Cc: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Check must happen before call to ipv6_addr_v4mapped() syzbot report was : BUG: KMSAN: uninit-value in sctp_sockaddr_af net/sctp/socket.c:359 [inline] BUG: KMSAN: uninit-value in sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384 CPU: 0 PID: 3576 Comm: syzkaller968804 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 sctp_sockaddr_af net/sctp/socket.c:359 [inline] sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384 sctp_bind+0x149/0x190 net/sctp/socket.c:332 inet6_bind+0x1fd/0x1820 net/ipv6/af_inet6.c:293 SYSC_bind+0x3f2/0x4b0 net/socket.c:1474 SyS_bind+0x54/0x80 net/socket.c:1460 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x43fd49 RSP: 002b:00007ffe99df3d28 EFLAGS: 00000213 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd49 RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401670 R13: 0000000000401700 R14: 0000000000000000 R15: 0000000000000000 Local variable description: ----address@SYSC_bind Variable was created at: SYSC_bind+0x6f/0x4b0 net/socket.c:1461 SyS_bind+0x54/0x80 net/socket.c:1460 Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Andrew Lunn authored
The Marvell switches under some conditions will pass a frame to the host with the port being the CPU port. Such frames are invalid, and should be dropped. Not dropping them can result in a crash when incrementing the receive statistics for an invalid port. Reported-by:
Chris Healy <cphealy@gmail.com> Fixes: 91da11f8 ("net: Distributed Switch Architecture protocol support") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
syzbot produced a nice report [1] Issue here is that a recvmmsg() managed to leak 8 bytes of kernel memory to user space, because sin_zero (padding field) was not properly cleared. [1] BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline] BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:227 CPU: 1 PID: 3586 Comm: syzkaller481044 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] move_addr_to_user+0x32e/0x530 net/socket.c:227 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2211 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394 SyS_recvmmsg+0x76/0xa0 net/socket.c:2378 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4401c9 RSP: 002b:00007ffc56f73098 EFLAGS: 00000217 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9 RDX: 0000000000000001 RSI: 0000000020003ac0 RDI: 0000000000000003 RBP: 00000000006ca018 R08: 0000000020003bc0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401af0 R13: 0000000000401b80 R14: 0000000000000000 R15: 0000000000000000 Local variable description: ----addr@___sys_recvmsg Variable was created at: ___sys_recvmsg+0xd5/0x810 net/socket.c:2172 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 Bytes 8-15 of 16 are uninitialized ================================================================== Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 3586 Comm: syzkaller481044 Tainted: G B 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 panic+0x39d/0x940 kernel/panic.c:183 kmsan_report+0x238/0x240 mm/kmsan/kmsan.c:1083 kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176 kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199 copy_to_user include/linux/uaccess.h:184 [inline] move_addr_to_user+0x32e/0x530 net/socket.c:227 ___sys_recvmsg+0x4e2/0x810 net/socket.c:2211 __sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313 SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394 SyS_recvmmsg+0x76/0xa0 net/socket.c:2378 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
David S. Miller authored
Eric Dumazet says: ==================== net: fix uninit-values in networking stack It seems syzbot got new features enabled, and fired some interesting reports. Oh well. ==================== Signed-off-by: -
Eric Dumazet authored
syzbot reported an uninit-value in inet_csk_bind_conflict() [1] It turns out we never propagated sk->sk_reuseport into timewait socket. [1] BUG: KMSAN: uninit-value in inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151 CPU: 1 PID: 3589 Comm: syzkaller008242 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151 inet_csk_get_port+0x1d28/0x1e40 net/ipv4/inet_connection_sock.c:320 inet6_bind+0x121c/0x1820 net/ipv6/af_inet6.c:399 SYSC_bind+0x3f2/0x4b0 net/socket.c:1474 SyS_bind+0x54/0x80 net/socket.c:1460 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x4416e9 RSP: 002b:00007ffce6d15c88 EFLAGS: 00000217 ORIG_RAX: 0000000000000031 RAX: ffffffffffffffda RBX: 0100000000000000 RCX: 00000000004416e9 RDX: 000000000000001c RSI: 0000000020402000 RDI: 0000000000000004 RBP: 0000000000000000 R08: 00000000e6d15e08 R09: 00000000e6d15e08 R10: 0000000000000004 R11: 0000000000000217 R12: 0000000000009478 R13: 00000000006cd448 R14: 0000000000000000 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 tcp_time_wait+0xf17/0xf50 net/ipv4/tcp_minisocks.c:283 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 inet_twsk_alloc+0xaef/0xc00 net/ipv4/inet_timewait_sock.c:182 tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756 inet_twsk_alloc+0x13b/0xc00 net/ipv4/inet_timewait_sock.c:163 tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258 tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003 tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331 sk_backlog_rcv include/net/sock.h:908 [inline] __release_sock+0x2d6/0x680 net/core/sock.c:2271 release_sock+0x97/0x2a0 net/core/sock.c:2786 tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269 inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427 inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435 sock_release net/socket.c:595 [inline] sock_close+0xe0/0x300 net/socket.c:1149 __fput+0x49e/0xa10 fs/file_table.c:209 ____fput+0x37/0x40 fs/file_table.c:243 task_work_run+0x243/0x2c0 kernel/task_work.c:113 exit_task_work include/linux/task_work.h:22 [inline] do_exit+0x10e1/0x38d0 kernel/exit.c:867 do_group_exit+0x1a0/0x360 kernel/exit.c:970 SYSC_exit_group+0x21/0x30 kernel/exit.c:981 SyS_exit_group+0x25/0x30 kernel/exit.c:979 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: da5e3630 ("soreuseport: TCP/IPv4 implementation") Signed-off-by:
-
Eric Dumazet authored
syzbot complained that res.type could be used while not initialized. Using RTN_UNSPEC as initial value seems better than using garbage. BUG: KMSAN: uninit-value in __mkroute_output net/ipv4/route.c:2200 [inline] BUG: KMSAN: uninit-value in ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493 CPU: 1 PID: 12207 Comm: syz-executor0 Not tainted 4.16.0+ #81 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 __mkroute_output net/ipv4/route.c:2200 [inline] ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493 ip_route_output_key_hash net/ipv4/route.c:2322 [inline] __ip_route_output_key include/net/route.h:126 [inline] ip_route_output_flow+0x1eb/0x3c0 net/ipv4/route.c:2577 raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747 SyS_sendto+0x8a/0xb0 net/socket.c:1715 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x455259 RSP: 002b:00007fdc0625dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fdc0625e6d4 RCX: 0000000000455259 RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000020000080 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000004f7 R14: 00000000006fa7c8 R15: 0000000000000000 Local variable description: ----res.i.i@ip_route_output_flow Variable was created at: ip_route_output_flow+0x75/0x3c0 net/ipv4/route.c:2576 raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653 Signed-off-by:
-
Eric Dumazet authored
syzbot reported an uninit-value read of skb->mark in iptable_mangle_hook() Thanks to the nice report, I tracked the problem to dccp not caring of ireq->ir_mark for passive sessions. BUG: KMSAN: uninit-value in ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline] BUG: KMSAN: uninit-value in iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84 CPU: 0 PID: 5300 Comm: syz-executor3 Not tainted 4.16.0+ #81 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline] iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84 nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline] nf_hook_slow+0x158/0x3d0 net/netfilter/core.c:483 nf_hook include/linux/netfilter.h:243 [inline] __ip_local_out net/ipv4/ip_output.c:113 [inline] ip_local_out net/ipv4/ip_output.c:122 [inline] ip_queue_xmit+0x1d21/0x21c0 net/ipv4/ip_output.c:504 dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142 dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281 dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363 dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x455259 RSP: 002b:00007f1a4473dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f1a4473e6d4 RCX: 0000000000455259 RDX: 0000000000000000 RSI: 0000000020b76fc8 RDI: 0000000000000015 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000004f0 R14: 00000000006fa720 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 ip_queue_xmit+0x1e35/0x21c0 net/ipv4/ip_output.c:502 dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142 dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281 dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363 dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818 inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg net/socket.c:640 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2046 __sys_sendmsg net/socket.c:2080 [inline] SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091 SyS_sendmsg+0x54/0x80 net/socket.c:2087 do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_save_stack mm/kmsan/kmsan.c:293 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521 inet_csk_clone_lock+0x503/0x580 net/ipv4/inet_connection_sock.c:797 dccp_create_openreq_child+0x7f/0x890 net/dccp/minisocks.c:92 dccp_v4_request_recv_sock+0x22c/0xe90 net/dccp/ipv4.c:408 dccp_v6_request_recv_sock+0x290/0x2000 net/dccp/ipv6.c:414 dccp_check_req+0x7b9/0x8f0 net/dccp/minisocks.c:197 dccp_v4_rcv+0x12e4/0x2630 net/dccp/ipv4.c:840 ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:288 [inline] ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:449 [inline] ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:288 [inline] ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] process_backlog+0x62d/0xe20 net/core/dev.c:5307 napi_poll net/core/dev.c:5705 [inline] net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771 __do_softirq+0x56d/0x93d kernel/softirq.c:285 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314 kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756 reqsk_alloc include/net/request_sock.h:88 [inline] inet_reqsk_alloc+0xc4/0x7f0 net/ipv4/tcp_input.c:6145 dccp_v4_conn_request+0x5cc/0x1770 net/dccp/ipv4.c:600 dccp_v6_conn_request+0x299/0x1880 net/dccp/ipv6.c:317 dccp_rcv_state_process+0x2ea/0x2410 net/dccp/input.c:612 dccp_v4_do_rcv+0x229/0x340 net/dccp/ipv4.c:682 dccp_v6_do_rcv+0x16d/0x1220 net/dccp/ipv6.c:578 sk_backlog_rcv include/net/sock.h:908 [inline] __sk_receive_skb+0x60e/0xf20 net/core/sock.c:513 dccp_v4_rcv+0x24d4/0x2630 net/dccp/ipv4.c:874 ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216 NF_HOOK include/linux/netfilter.h:288 [inline] ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257 dst_input include/net/dst.h:449 [inline] ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397 NF_HOOK include/linux/netfilter.h:288 [inline] ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493 __netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562 __netif_receive_skb net/core/dev.c:4627 [inline] process_backlog+0x62d/0xe20 net/core/dev.c:5307 napi_poll net/core/dev.c:5705 [inline] net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771 __do_softirq+0x56d/0x93d kernel/softirq.c:285 Signed-off-by:
-
Eric Dumazet authored
syzbot complained : BUG: KMSAN: uninit-value in memcmp+0x119/0x180 lib/string.c:861 CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0+ #82 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:53 kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067 __msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676 memcmp+0x119/0x180 lib/string.c:861 __hw_addr_add_ex net/core/dev_addr_lists.c:60 [inline] __dev_mc_add+0x1c2/0x8e0 net/core/dev_addr_lists.c:670 dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687 igmp6_group_added+0x2db/0xa00 net/ipv6/mcast.c:662 ipv6_dev_mc_inc+0xe9e/0x1130 net/ipv6/mcast.c:914 addrconf_join_solict net/ipv6/addrconf.c:2078 [inline] addrconf_dad_begin net/ipv6/addrconf.c:3828 [inline] addrconf_dad_work+0x427/0x2150 net/ipv6/addrconf.c:3954 process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2113 worker_thread+0x113c/0x24f0 kernel/workqueue.c:2247 kthread+0x539/0x720 kernel/kthread.c:239 Fixes: f001fde5 ("net: introduce a list of device addresses dev_addr_list (v6)") Signed-off-by:
-
Eric Dumazet authored
syzbot reported __skb_try_recv_from_queue() was using skb->peeked while it was potentially unitialized. We need to clear it in __skb_clone() Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
syzbot reported : BUG: KMSAN: uninit-value in rtnh_ok include/net/nexthop.h:11 [inline] BUG: KMSAN: uninit-value in fib_count_nexthops net/ipv4/fib_semantics.c:469 [inline] BUG: KMSAN: uninit-value in fib_create_info+0x554/0x8d20 net/ipv4/fib_semantics.c:1091 @remaining is an integer, coming from user space. If it is negative we want rtnh_ok() to return false. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by:
-
Eric Dumazet authored
syzbot reported : BUG: KMSAN: uninit-value in ffs arch/x86/include/asm/bitops.h:432 [inline] BUG: KMSAN: uninit-value in netlink_sendmsg+0xb26/0x1310 net/netlink/af_netlink.c:1851 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Eric Dumazet authored
syzbot reported : BUG: KMSAN: uninit-value in alg_bind+0xe3/0xd90 crypto/af_alg.c:162 We need to check addr_len before dereferencing sa (or uaddr) Fixes: bb30b884 ("crypto: af_alg - whitelist mask and type") Signed-off-by:
-
- 07 Apr, 2018 1 commit
-
-
Cong Wang authored
When we delete a u32 key via u32_delete_key(), we forget to call idr_remove() to remove its handle from IDR. Fixes: e7614370 ("net_sched: use idr to allocate u32 filter handles") Reported-by:
Marcin Kabiesz <admin@hostcenter.eu> Tested-by:
-
- 06 Apr, 2018 11 commits
-
-
Esben Haabendal authored
The LED2[2]/INTn pin on Marvell 88E1318S as well as 88E1510/12/14/18 needs to be configured to be usable as interrupt not only when WOL is enabled, but whenever we rely on interrupts from the PHY. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queueDavid S. Miller authored
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-04-06 This series contains a couple of fixes for the new ice driver. Wei Yongjun fixes the return error code for error case during init. Anirudh fixes the incorrect use of ARRAY_SIZE() in the ice ethtool code and fixed "for" loop calculations. ==================== Signed-off-by: -
Anirudh Venkataramanan authored
1) Return correct size from ice_get_regs_len. 2) Fix incorrect use of ARRAY_SIZE in ice_get_regs. Fixes: fcea6f3d (ice: Add stats and ethtool support) Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Wei Yongjun authored
Fix to return error code ICE_ERR_NO_MEMORY from the alloc error handling case instead of 0, as done elsewhere in this function. Fixes: dc49c772 ("ice: Get MAC/PHY/link info and scheduler topology") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
-
Davide Caratti authored
when tcf_bpf_init_from_ops() fails (e.g. because of program having invalid number of instructions), tcf_bpf_cfg_cleanup() calls bpf_prog_put(NULL) or bpf_prog_destroy(NULL). Unless CONFIG_BPF_SYSCALL is unset, this causes the following error: BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 PGD 800000007345a067 P4D 800000007345a067 PUD 340e1067 PMD 0 Oops: 0000 [#1] SMP PTI Modules linked in: act_bpf(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd glue_helper cryptd joydev snd_timer snd virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console i2c_core crc32c_intel serio_raw virtio_pci ata_piix libata virtio_ring floppy virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf] CPU: 3 PID: 5654 Comm: tc Tainted: G E 4.16.0.bpf_test+ #408 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__bpf_prog_put+0xc/0xc0 RSP: 0018:ffff9594003ef728 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9594003ef758 RCX: 0000000000000024 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044 R10: 0000000000000220 R11: ffff8a7ab9f17131 R12: 0000000000000000 R13: ffff8a7ab7c3c8e0 R14: 0000000000000001 R15: ffff8a7ab88f1054 FS: 00007fcb2f17c740(0000) GS:ffff8a7abfd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000020 CR3: 000000007c888006 CR4: 00000000001606e0 Call Trace: tcf_bpf_cfg_cleanup+0x2f/0x40 [act_bpf] tcf_bpf_cleanup+0x4c/0x70 [act_bpf] __tcf_idr_release+0x79/0x140 tcf_bpf_init+0x125/0x330 [act_bpf] tcf_action_init_1+0x2cc/0x430 ? get_page_from_freelist+0x3f0/0x11b0 tcf_action_init+0xd3/0x1b0 tc_ctl_action+0x18b/0x240 rtnetlink_rcv_msg+0x29c/0x310 ? _cond_resched+0x15/0x30 ? __kmalloc_node_track_caller+0x1b9/0x270 ? rtnl_calcit.isra.29+0x100/0x100 netlink_rcv_skb+0xd2/0x110 netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2cd/0x3c0 sock_sendmsg+0x30/0x40 ___sys_sendmsg+0x27a/0x290 ? mem_cgroup_commit_charge+0x80/0x130 ? page_add_new_anon_rmap+0x73/0xc0 ? do_anonymous_page+0x2a2/0x560 ? __handle_mm_fault+0xc75/0xe20 __sys_sendmsg+0x58/0xa0 do_syscall_64+0x6e/0x1a0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fcb2e58eba0 RSP: 002b:00007ffc93c496c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007ffc93c497f0 RCX: 00007fcb2e58eba0 RDX: 0000000000000000 RSI: 00007ffc93c49740 RDI: 0000000000000003 RBP: 000000005ac6a646 R08: 0000000000000002 R09: 0000000000000000 R10: 00007ffc93c49120 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc93c49804 R14: 0000000000000001 R15: 000000000066afa0 Code: 5f 00 48 8b 43 20 48 c7 c7 70 2f 7c b8 c7 40 10 00 00 00 00 5b e9 a5 8b 61 00 0f 1f 44 00 00 0f 1f 44 00 00 41 54 55 48 89 fd 53 <48> 8b 47 20 f0 ff 08 74 05 5b 5d 41 5c c3 41 89 f4 0f 1f 44 00 RIP: __bpf_prog_put+0xc/0xc0 RSP: ffff9594003ef728 CR2: 0000000000000020 Fix it in tcf_bpf_cfg_cleanup(), ensuring that bpf_prog_{put,destroy}(f) is called only when f is not NULL. Fixes: bbc09e78 ("net/sched: fix idr leak on the error path of tcf_bpf_init()") Reported-by:Lucas Bates <lucasb@mojatatu.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Signed-off-by:
-
Jeff Barnhill authored
At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get incremented regardless of whether or not the netfilter hook allows the packet to continue being processed. This change increments the counters in ip6_forward_finish() so that it will not happen if the netfilter hook chooses to terminate the packet, which is similar to how IPv4 works. Signed-off-by:
Jeff Barnhill <0xeffeff@gmail.com> Signed-off-by:
-
David S. Miller authored
Mohammed Gamal says: ==================== hv_netvsc: Fix shutdown issues on older Windows hosts Guests running on WS2012 hosts would not shutdown when changing network interface setting (e.g. Number of channels, MTU ... etc). This patch series addresses these shutdown issues we enecountered with WS2012 hosts. It's essentialy a rework of the series sent in https://lkml.org/lkml/2018/1/23/111 on top of latest upstream ==================== Fixes: 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by:
-
Mohammed Gamal authored
The callers to netvsc_revoke_*_buf() and netvsc_teardown_*_gpadl() already have their net_device instances. Pass them as a paramaeter to the function instead of obtaining them from netvsc_device struct everytime Signed-off-by:
Mohammed Gamal <mgamal@redhat.com> Signed-off-by:
-
Mohammed Gamal authored
Prior to commit 0cf73780 ("hv_netvsc: netvsc_teardown_gpadl() split") the call sequence in netvsc_device_remove() was as follows (as implemented in netvsc_destroy_buf()): 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Teardown receive buffer GPADL 3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 4- Teardown send buffer GPADL 5- Close vmbus This didn't work for WS2016 hosts. Commit 0cf73780 ("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the teardown sequence as follows: 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Close vmbus 4- Teardown receive buffer GPADL 5- Teardown send buffer GPADL That worked well for WS2016 hosts, but it prevented guests on older hosts from shutting down after changing network settings. Commit 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions") ensured the following message sequence for older hosts 1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message 2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message 3- Teardown receive buffer GPADL 4- Teardown send buffer GPADL 5- Close vmbus However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the process becomes uninterruptible. On futher analysis it turns out that on tearing down the receive buffer GPADL the kernel is waiting indefinitely in vmbus_teardown_gpadl() for a completion to be signaled. Here is a snippet of where this occurs: int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle) { struct vmbus_channel_gpadl_teardown *msg; struct vmbus_channel_msginfo *info; unsigned long flags; int ret; info = kmalloc(sizeof(*info) + sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL); if (!info) return -ENOMEM; init_completion(&info->waitevent); info->waiting_channel = channel; [....] ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown), true); if (ret) goto post_msg_err; wait_for_completion(&info->waitevent); [....] } The completion is signaled from vmbus_ongpadl_torndown(), which gets called when the corresponding message is received from the host, which apparently never happens in that case. This patch works around the issue by restoring the first mentioned message sequence for older hosts Fixes: 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by:
-
Mohammed Gamal authored
Split each of the functions into two for each of send/recv buffers. This will be needed in order to implement a fine-grained messaging sequence to the host so that we accommodate the requirements of different Windows versions Fixes: 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by:
-
Mohammed Gamal authored
When changing network interface settings, Windows guests older than WS2016 can no longer shutdown. This was addressed by commit 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions"), however the issue also occurs on WS2012 guests that share NVSP protocol versions with WS2016 guests. Hence we use Windows version directly to differentiate them. Fixes: 0ef58b0a ("hv_netvsc: change GPAD teardown order on older versions") Signed-off-by:
-
