Don't load an inode with a negative size; this causes integer overflow
problems in the VFS.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jan Kara <jack@suse.cz>

The only places that were grabbing dqonoff_mutex are functions turning
quotas on and off and these are properly serialized using s_umount
semaphore. Remove dqonoff_mutex.
Signed-off-by: Jan Kara <jack@suse.cz>

Currently we use dqonoff_mutex to serialize quota recovery protection
and turning of quotas on / off. Use s_umount semaphore instead.
Tested-by: Eric Ren <zren@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>

All callers of dquot_scan_active() now hold s_umount so we can rely on
that lock to protect us against quota state changes.
Signed-off-by: Jan Kara <jack@suse.cz>

New quota locking rules will require s_umount semaphore for all quota
scanning functions. Add is for periodic quota syncing.
Tested-by: Eric Ren <zren@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Writeback quota is protected by s_umount semaphore held for reading
because every writeback must be protected by that lock (grabbed either
by the generic writeback code or by quotactl handler). Getting next
available ID in quota file, querying quota state, setting quota
information, getting quota format are all quotactl operations protected
by s_umount semaphore held for reading grabbed in quotactl handler.

This also fixes lockdep splat about possible deadlock during filesystem
freezing where sync_filesystem() is called with page-faults already
blocked but sync_filesystem() calls into dquot_writeback_dquots() which
grabs dqonoff_mutex which ranks above i_mutex (vfs_load_quota_inode()
grabs i_mutex under dqonoff_mutex) which clearly ranks below page fault
freeze protection (e.g. via mmap_sem dependencies). The reported problem
is not a real deadlock possibility since during quota on we check
whether filesystem freezing is not in progress but still it is good to
have this fixed.
Reported-by: Ted Tso <tytso@mit.edu>
Reported-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>

Currently we hold s_umount semaphore only in shared mode when enabling
or disabling quotas and use dqonoff_mutex for serializing quota state
changes on a filesystem and also quota state changes with other places
depending on current quota state. Using dedicated mutex for this causes
possible deadlocks during filesystem freezing (see following commit for
details) so we transition to using s_umount semaphore for the necessary
synchronization whose lock ordering is properly handled by the
filesystem freezing code. As a start grab s_umount in exclusive mode
when enabling / disabling quotas.
Signed-off-by: Jan Kara <jack@suse.cz>

Quota code will need a variant of get_super_thawed() that returns
superblock with s_umount held in exclusive mode to serialize quota on
and quota off operations. Provide this functionality.
Signed-off-by: Jan Kara <jack@suse.cz>

Pull ARM fixes from Russell King:
 "A few more ARM fixes:

   - the assembly backtrace code suffers problems with the new printk()
     implementation which assumes that kernel messages without KERN_CONT
     should have newlines inserted between them. Fix this.
   - fix a section naming error - ".init.text" rather than ".text.init"
   - preallocate DMA debug memory at core_initcall() time rather than
     fs_initcall(), as we have some core drivers that need to use DMA
     mapping - and that triggers a kernel warning from the DMA debug
     code.
   - fix XIP kernels after the ro_after_init changes made this data
     permanently read-only"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: Fix XIP kernels
  ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall
  ARM: 8624/1: proc-v7m.S: fix init section name
  ARM: fix backtrace

Pull ARM SoC fixes from Olof Johansson:
 "Again a set of smaller fixes across several platforms (OMAP, Marvell,
  Allwinner, i.MX, etc).

  A handful of typo fixes and smaller missing contents from device
  trees, with some tweaks to OMAP mach files to deal with CPU feature
  print misformatting, potential NULL ptr dereference and one setup
  issue with UARTs"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ipmi/bt-bmc: change compatible node to 'aspeed, ast2400-ibt-bmc'
  ARM: dts: STiH410-b2260: Fix typo in spi0 chipselect definition
  ARM: dts: omap5: board-common: fix wrong SMPS6 (VDD-DDR3) voltage
  ARM: omap3: Add missing memory node in SOM-LV
  arm64: dts: marvell: add unique identifiers for Armada A8k SPI controllers
  arm64: dts: marvell: fix clocksource for CP110 slave SPI0
  arm64: dts: marvell: Fix typo in label name on Armada 37xx
  ASoC: omap-abe-twl6040: fix typo in bindings documentation
  dts: omap5: board-common: enable twl6040 headset jack detection
  dts: omap5: board-common: add phandle to reference Palmas gpadc
  ARM: OMAP2+: avoid NULL pointer dereference
  ARM: OMAP2+: PRM: initialize en_uart4_mask and grpsel_uart4_mask
  ARM: dts: omap3: Fix memory node in Torpedo board
  ARM: AM43XX: Select OMAP_INTERCONNECT in Kconfig
  ARM: OMAP3: Fix formatting of features printed
  ARM: dts: imx53-qsb: Fix regulator constraints
  ARM: dts: sun8i: fix the pinmux for UART1

Pull ext4 fixes from Ted Ts'o:
 "A security fix (so a maliciously corrupted file system image won't
  panic the kernel) and some fixes for CONFIG_VMAP_STACK"

* tag 'ext4_for_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: sanity check the block and cluster size at mount time
  fscrypto: don't use on-stack buffer for key derivation
  fscrypto: don't use on-stack buffer for filename encryption

If the block size or cluster size is insane, reject the mount.  This
is important for security reasons (although we shouldn't be just
depending on this check).

Ref: http://www.securityfocus.com/archive/1/539661
Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1332506Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nikolay Borisov <kernel@kyup.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  get_crypt_info() was using a stack buffer to hold the
output from the encryption operation used to derive the per-file key.
Fix it by using a heap buffer.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

With the new (in 4.9) option to use a virtually-mapped stack
(CONFIG_VMAP_STACK), stack buffers cannot be used as input/output for
the scatterlist crypto API because they may not be directly mappable to
struct page.  For short filenames, fname_encrypt() was encrypting a
stack buffer holding the padded filename.  Fix it by encrypting the
filename in-place in the output buffer, thereby making the temporary
buffer unnecessary.

This bug could most easily be observed in a CONFIG_DEBUG_SG kernel
because this allowed the BUG in sg_set_buf() to be triggered.

Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>

Pull i2c fixes from Wolfram Sang:
 "Some I2C driver bugfixes (and one documentation fix)"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-mux-pca954x: fix deselect enabling for device-tree
  i2c: digicolor: use clk_disable_unprepare instead of clk_unprepare
  i2c: mux: fix up dependencies
  i2c: Documentation: i2c-topology: fix minor whitespace nit
  i2c: mux: demux-pinctrl: make drivers with no pinctrl work again

Pull KVM fixes from Radim Krčmář:
 "ARM:
   - Fix handling of the 32bit cycle counter
   - Fix cycle counter filtering

  x86:
   - Fix a race leading to double unregistering of user notifiers
   - Amend oversight in kvm_arch_set_irq that turned Hyper-V code dead
   - Use SRCU around kvm_lapic_set_vapic_addr
   - Avoid recursive flushing of asynchronous page faults
   - Do not rely on deferred update in KVM_GET_CLOCK, which fixes #GP
   - Let userspace know that KVM_GET_CLOCK is useful with master clock;
     4.9 changed the return value to better match the guest clock, but
     didn't provide means to let guests take advantage of it"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: merge kvm_arch_set_irq and kvm_arch_set_irq_inatomic
  KVM: x86: fix missed SRCU usage in kvm_lapic_set_vapic_addr
  KVM: async_pf: avoid recursive flushing of work items
  kvm: kvmclock: let KVM_GET_CLOCK return whether the master clock is in use
  KVM: Disable irq while unregistering user notifier
  KVM: x86: do not go through vcpu in __get_kvmclock_ns
  KVM: arm64: Fix the issues when guest PMCCFILTR is configured
  arm64: KVM: pmu: Fix AArch32 cycle counter access

Deselect functionality can be ignored for device-trees with
"i2c-mux-idle-disconnect" entries if no platform_data is available.
By enabling the deselect functionality outside the platform_data
block the logic works as it did in previous kernels.

Fixes: 7fcac980 ("i2c: i2c-mux-pca954x: convert to use an explicit i2c mux core")
Cc: <stable@vger.kernel.org> # v4.7+
Signed-off-by: Alex Hemme <ahemme@cisco.com>
Signed-off-by: Ziyang Wu <ziywu@cisco.com>
[touched up a few minor issues /peda]
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Pull powerpc fixes from Michael Ellerman:
 "Fixes marked for stable:
   - fix system reset interrupt winkle wakeups
   - fix setting of AIL in hypervisor mode

  Fixes for code merged this cycle:
   - fix exception vector build with 2.23 era binutils
   - fix missing update of HID register on secondary CPUs

  Other:
   - fix missing pr_cont()s
   - invalidate ERAT on tlbiel for POWER9 DD1"

* tag 'powerpc-4.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/mm: Fix missing update of HID register on secondary CPUs
  powerpc/mm/radix: Invalidate ERAT on tlbiel for POWER9 DD1
  powerpc/64: Fix setting of AIL in hypervisor mode
  powerpc/oops: Fix missing pr_cont()s in instruction dump
  powerpc/oops: Fix missing pr_cont()s in show_regs()
  powerpc/oops: Fix missing pr_cont()s in print_msr_bits() et. al.
  powerpc/oops: Fix missing pr_cont()s in show_stack()
  powerpc: Fix exception vector build with 2.23 era binutils
  powerpc/64s: Fix system reset interrupt winkle wakeups

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Compiler warning in caam driver that was the last one remaining

   - Do not register aes-xts in caam drivers on unsupported platforms

   - Regression in algif_hash interface that may lead to an oops"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif_hash - Fix NULL hash crash with shash
  crypto: caam - fix type mismatch warning
  crypto: caam - do not register AES-XTS mode on LP units

Pull LED subsystem update from Jacek Anaszewski:
 "I'd like to announce a new co-maintainer - Pavel Machek"

* tag 'leds_4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  MAINTAINERS: Add LED subsystem co-maintainer

Pull dmaengine fixes from Vinod Koul:
 "Some driver fixes which we pending in my tree:

   - return error code fix in edma driver
   - Kconfig fix for genric allocator in mmp_tdma
   - fix uninitialized value in sun6i
   - Runtime pm fixes for cppi"

* tag 'dmaengine-fix-4.9-rc6' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: cppi41: More PM runtime fixes
  dmaengine: cpp41: Fix handling of error path
  dmaengine: cppi41: Fix unpaired pm runtime when only a USB hub is connected
  dmaengine: cppi41: Fix list not empty warning on module removal
  dmaengine: sun6i: fix the uninitialized value for v_lli
  dmaengine: mmp_tdma: add missing select GENERIC_ALLOCATOR in Kconfig
  dmaengine: edma: Fix error return code in edma_alloc_chan_resources()

kvm_arch_set_irq is unused since commit b97e6de9.  Merge
its functionality with kvm_arch_set_irq_inatomic.
Reported-by: Jiang Biao <jiang.biao2@zte.com.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Reported by syzkaller:

    [ INFO: suspicious RCU usage. ]
    4.9.0-rc4+ #47 Not tainted
    -------------------------------
    ./include/linux/kvm_host.h:536 suspicious rcu_dereference_check() usage!

    stack backtrace:
    CPU: 1 PID: 6679 Comm: syz-executor Not tainted 4.9.0-rc4+ #47
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
     ffff880039e2f6d0 ffffffff81c2e46b ffff88003e3a5b40 0000000000000000
     0000000000000001 ffffffff83215600 ffff880039e2f700 ffffffff81334ea9
     ffffc9000730b000 0000000000000004 ffff88003c4f8420 ffff88003d3f8000
    Call Trace:
     [<     inline     >] __dump_stack lib/dump_stack.c:15
     [<ffffffff81c2e46b>] dump_stack+0xb3/0x118 lib/dump_stack.c:51
     [<ffffffff81334ea9>] lockdep_rcu_suspicious+0x139/0x180 kernel/locking/lockdep.c:4445
     [<     inline     >] __kvm_memslots include/linux/kvm_host.h:534
     [<     inline     >] kvm_memslots include/linux/kvm_host.h:541
     [<ffffffff8105d6ae>] kvm_gfn_to_hva_cache_init+0xa1e/0xce0 virt/kvm/kvm_main.c:1941
     [<ffffffff8112685d>] kvm_lapic_set_vapic_addr+0xed/0x140 arch/x86/kvm/lapic.c:2217
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: fda4e2e8
Cc: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

This was reported by syzkaller:

    [ INFO: possible recursive locking detected ]
    4.9.0-rc4+ #49 Not tainted
    ---------------------------------------------
    kworker/2:1/5658 is trying to acquire lock:
     ([ 1644.769018] (&work->work)
    [<     inline     >] list_empty include/linux/compiler.h:243
    [<ffffffff8128dd60>] flush_work+0x0/0x660 kernel/workqueue.c:1511

    but task is already holding lock:
     ([ 1644.769018] (&work->work)
    [<ffffffff812916ab>] process_one_work+0x94b/0x1900 kernel/workqueue.c:2093

    stack backtrace:
    CPU: 2 PID: 5658 Comm: kworker/2:1 Not tainted 4.9.0-rc4+ #49
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: events async_pf_execute
     ffff8800676ff630 ffffffff81c2e46b ffffffff8485b930 ffff88006b1fc480
     0000000000000000 ffffffff8485b930 ffff8800676ff7e0 ffffffff81339b27
     ffff8800676ff7e8 0000000000000046 ffff88006b1fcce8 ffff88006b1fccf0
    Call Trace:
    ...
    [<ffffffff8128ddf3>] flush_work+0x93/0x660 kernel/workqueue.c:2846
    [<ffffffff812954ea>] __cancel_work_timer+0x17a/0x410 kernel/workqueue.c:2916
    [<ffffffff81295797>] cancel_work_sync+0x17/0x20 kernel/workqueue.c:2951
    [<ffffffff81073037>] kvm_clear_async_pf_completion_queue+0xd7/0x400 virt/kvm/async_pf.c:126
    [<     inline     >] kvm_free_vcpus arch/x86/kvm/x86.c:7841
    [<ffffffff810b728d>] kvm_arch_destroy_vm+0x23d/0x620 arch/x86/kvm/x86.c:7946
    [<     inline     >] kvm_destroy_vm virt/kvm/kvm_main.c:731
    [<ffffffff8105914e>] kvm_put_kvm+0x40e/0x790 virt/kvm/kvm_main.c:752
    [<ffffffff81072b3d>] async_pf_execute+0x23d/0x4f0 virt/kvm/async_pf.c:111
    [<ffffffff8129175c>] process_one_work+0x9fc/0x1900 kernel/workqueue.c:2096
    [<ffffffff8129274f>] worker_thread+0xef/0x1480 kernel/workqueue.c:2230
    [<ffffffff812a5a94>] kthread+0x244/0x2d0 kernel/kthread.c:209
    [<ffffffff831f102a>] ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:433

The reason is that kvm_put_kvm is causing the destruction of the VM, but
the page fault is still on the ->queue list.  The ->queue list is owned
by the VCPU, not by the work items, so we cannot just add list_del to
the work item.

Instead, use work->vcpu to note async page faults that have been resolved
and will be processed through the done list.  There is no need to flush
those.

Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Userspace can read the exact value of kvmclock by reading the TSC
and fetching the timekeeping parameters out of guest memory.  This
however is brittle and not necessary anymore with KVM 4.11.  Provide
a mechanism that lets userspace know if the new KVM_GET_CLOCK
semantics are in effect, and---since we are at it---if the clock
is stable across all VCPUs.

Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Function user_notifier_unregister should be called only once for each
registered user notifier.

Function kvm_arch_hardware_disable can be executed from an IPI context
which could cause a race condition with a VCPU returning to user mode
and attempting to unregister the notifier.
Signed-off-by: Ignacio Alvarado <ikalvarado@google.com>
Cc: stable@vger.kernel.org
Fixes: 18863bdd ("KVM: x86 shared msr infrastructure")
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Going through the first VCPU is wrong if you follow a KVM_SET_CLOCK with
a KVM_GET_CLOCK immediately after, without letting the VCPU run and
call kvm_guest_time_update.

To fix this, compute the kvmclock value ourselves, using the master
clock (tsc, nsec) pair as the base and the host CPU frequency as
the scale.
Reported-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM/ARM updates for v4.9-rc6

- Fix handling of the 32bit cycle counter
- Fix cycle counter filtering

Pull ACPI fixes from Rafael Wysocki:
 "They fix an ACPI thermal management regression introduced by a recent
  FADT handling cleanup, an ACPI tools build issue introduced by a
  recent ACPICA commit and a PCC mailbox initialization bug causing
  lockdep to complain loudly.

  Specifics:

   - Revert a recent ACPICA cleanup that attempted to get rid of all
     FADT version 2 legacy, but broke ACPI thermal management on at
     least one system (Rafael Wysocki).

   - Fix cross-compiled builds of ACPI tools that stopped working after
     a recent cleanup related to the handling of header files in ACPICA
     (Lv Zheng).

   - Fix a locking issue in the PCC channel initialization code that
     invokes devm_request_irq() under a spinlock (among other things)
     and causes lockdep to complain (Hoan Tran)"

* tag 'acpi-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tools/power/acpi: Remove direct kernel source include reference
  mailbox: PCC: Fix lockdep warning when request PCC channel
  Revert "ACPICA: FADT support cleanup"

Pull kbuild fixes from Michal Marek:
 "Here are some regression fixes for kbuild:

   - modversion support for exported asm symbols (Nick Piggin). The
     affected architectures need separate patches adding
     asm-prototypes.h.

   - fix rebuilds of lib-ksyms.o (Nick Piggin)

   - -fno-PIE builds (Sebastian Siewior and Borislav Petkov). This is
     not a kernel regression, but one of the Debian gcc package.
     Nevertheless, it's quite annoying, so I think it should go into
     mainline and stable now"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Steal gcc's pie from the very beginning
  kbuild: be more careful about matching preprocessed asm ___EXPORT_SYMBOL
  x86/kexec: add -fno-PIE
  scripts/has-stack-protector: add -fno-PIE
  kbuild: add -fno-PIE
  kbuild: modversions for EXPORT_SYMBOL() for asm
  kbuild: prevent lib-ksyms.o rebuilds

Pull nfsd bugfix from Bruce Fields:
 "Just one fix for an NFS/RDMA crash"

* tag 'nfsd-4.9-2' of git://linux-nfs.org/~bfields/linux:
  sunrpc: svc_age_temp_xprts_now should not call setsockopt non-tcp transports

Mark me as a co-maintainer of LED subsystem.
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>

* acpica-fixes:
  Revert "ACPICA: FADT support cleanup"

* acpi-cppc-fixes:
  mailbox: PCC: Fix lockdep warning when request PCC channel

* acpi-tools-fixes:
  tools/power/acpi: Remove direct kernel source include reference

Pull sound fixes from Takashi Iwai:
 "Three trivial fixes:

  A regression fix for ASRock mobo, a use-after-free fix at hot-unplug
  of USB-audio, and a quirk for new Thinkpad models"

* tag 'sound-4.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix use-after-free of usb_device at disconnect
  ALSA: hda - Fix mic regression by ASRock mobo fixup
  ALSA: hda - add a new condition to check if it is thinkpad

Pull GPIO fixes from Linus Walleij:
 "These are hopefully the last GPIO fixes for v4.9. The most important
  is that it fixes the UML randconfig builds that have been nagging me
  for some time and me being confused about where the problem was really
  sitting, now this fix give this nice feeling that everything is solid
  and builds fine.

  Summary:

   - Finally, after being puzzled by a bunch of recurrent UML build
     failures on randconfigs from the build robot, Keno Fischer nailed
     it: GPIO_DEVRES is optional and depends on HAS_IOMEM even though
     many users just unconditionally rely on it to be available. And it
     *should* be available: garbage collection is nice for this and it
     *certainly* has nothing to do with having IOMEM. So we got rid of
     it, and now the UML builds should JustWork(TM).

   - Do not call .get_direction() on sleeping GPIO chips on the fastpath
     when locking GPIOs for interrupts: it is done from atomic context,
     no way.

   - Some driver fixes"

* tag 'gpio-v4.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: Remove GPIO_DEVRES option
  gpio: tc3589x: fix up .get_direction()
  gpio: do not double-check direction on sleeping chips
  gpio: pca953x: Move memcpy into mutex lock for set multiple
  gpio: pca953x: Fix corruption of other gpios in set_multiple.

Pull drm fixes from Dave Airlie:
 "i915 fixes + 2 mediatek regressions.

  So some i915 fixes came in which I thought they might so I'm sending
  those along with two reverts for two patches to the mediatek driver
  that didn't seem to build so well, I've fixed up my -fixes ARM build
  and .config so I could see it, but yes brown paper bag time"

* tag 'drm-fixes-for-v4.9-rc6-brown-paper-bag' of git://people.freedesktop.org/~airlied/linux:
  Revert "drm/mediatek: set vblank_disable_allowed to true"
  Revert "drm/mediatek: fix a typo of OD_CFG to OD_RELAYMODE"
  drm/i915: Assume non-DP++ port if dvo_port is HDMI and there's no AUX ch specified in the VBT
  drm/i915: Refresh that status of MST capable connectors in ->detect()
  drm/i915: Grab the rotation from the passed plane state for VLV sprites
  drm/i915: Mark CPU cache as dirty when used for rendering

Recently algif_hash has been changed to allow null hashes.  This
triggers a bug when used with an shash algorithm whereby it will
cause a crash during the digest operation.

This patch fixes it by avoiding the digest operation and instead
doing an init followed by a final which avoids the buggy code in
shash.

This patch also ensures that the result buffer is freed after an
error so that it is not returned as a genuine hash result on the
next recv call.

The shash/ahash wrapper code will be fixed later to handle this
case correctly.

Fixes: 493b2ed3 ("crypto: algif_hash - Handle NULL hashes correctly")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Laura Abbott <labbott@redhat.com>

We need to update on secondaries for the selected MMU mode.

Fixes: ad410674 ("powerpc/mm: Update the HID bit when switching from radix to hash")
Reported-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

KVM calls kvm_pmu_set_counter_event_type() when PMCCFILTR is configured.
But this function can't deals with PMCCFILTR correctly because the evtCount
bits of PMCCFILTR, which is reserved 0, conflits with the SW_INCR event
type of other PMXEVTYPER<n> registers. To fix it, when eventsel == 0, this
function shouldn't return immediately; instead it needs to check further
if select_idx is ARMV8_PMU_CYCLE_IDX.

Another issue is that KVM shouldn't copy the eventsel bits of PMCCFILTER
blindly to attr.config. Instead it ought to convert the request to the
"cpu cycle" event type (i.e. 0x11).

To support this patch and to prevent duplicated definitions, a limited
set of ARMv8 perf event types were relocated from perf_event.c to
asm/perf_event.h.

Cc: stable@vger.kernel.org # 4.6+
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Wei Huang <wei@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>